Fangneng Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fangneng Li has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Miao Wu
School of Electrical Engineering, Naval University of Engineering, Wuhan 430033, China
4 shared publications - Bing Zhu
Beijing Institute of Tracking and Telecommunication Technology
2 shared publications - Hongyang He
Naval University of Engineering
2 shared publications - Jiangning Xu
Department of Navigation Engineering, Naval University of Engineering (NUE), Wuhan, China
2 shared publications - Jingshu Li
Naval University of Engineering
2 shared publications - Xianzhou Jin
The College of Electrical Engineering, Naval University of Engineering, Wuhan 430033, China
2 shared publications
Latest Publications
- Open Access
- 8 December 2025
- Published by MDPI AG in Electronics
- Vol. 14 (24) , 4838
An Zero-Point Drift Suppression Method for eLoran Signal Based on a Segmented Inaction Algorithm
Research on interference suppression technology for enhanced long-range navigation (eLoran) signals is crucial for enhancing receiver performance. To address the zero-point drift phenomenon in eLoran signals during adaptive filtering, we propose a segmented inaction algorithm based on normal time–frequency transform (NTFT), which is designed for challenging environments, such as low signal-to-noise ratio (SNR) and complex noise conditions. The algorithm splits the 20 kHz frequency band of the eLoran signal into 200 equal sub-bands, then applies the inaction algorithm sequentially to each sub-band, which exhibits strong noise resistance and high robustness. It is regarded as a pre-filter of the adaptive filter, ensuring a cleaner input signal for subsequent processing. Simulation results indicate that, when processing low-SNR eLoran signals affected by multi-frequency narrow-band interference and band-limited Gaussian noise, the combined algorithm significantly improves root mean square error (RMSE) by 33.3% and relative root mean square error (R-RMSE) by 39.1% compared to the single VSS-LMS method. Additionally, it compensates for zero-point drift (the deviation observed in the time series between the positive zero-crossing point of the third period of the reconstructed signal and that of the original signal) by 79.3% and maintains third-week forward over-zero error at a very low level. The effectiveness of the combined algorithm was further validated through actual measurement experiments.
- 8 December 2025
- Published by MDPI AG in Electronics
- Vol. 14 (24) , 4838
Open AccessAn Zero-Point Drift Suppression Method for eLoran Signal Based on a Segmented Inaction Algorithm
Research on interference suppression technology for enhanced long-range navigation (eLoran) signals is crucial for enhancing receiver performance. To address the zero-point drift phenomenon in eLoran signals during adaptive filtering, we propose a segmented inaction algorithm based on normal time–frequency transform (NTFT), which is designed for challenging environments, such as low signal-to-noise ratio (SNR) and complex noise conditions. The algorithm splits the 20 kHz frequency band of the eLoran signal into 200 equal sub-bands, then applies the inaction algorithm sequentially to each sub-band, which exhibits strong noise resistance and high robustness. It is regarded as a pre-filter of the adaptive filter, ensuring a cleaner input signal for subsequent processing. Simulation results indicate that, when processing low-SNR eLoran signals affected by multi-frequency narrow-band interference and band-limited Gaussian noise, the combined algorithm significantly improves root mean square error (RMSE) by 33.3% and relative root mean square error (R-RMSE) by 39.1% compared to the single VSS-LMS method. Additionally, it compensates for zero-point drift (the deviation observed in the time series between the positive zero-crossing point of the third period of the reconstructed signal and that of the original signal) by 79.3% and maintains third-week forward over-zero error at a very low level. The effectiveness of the combined algorithm was further validated through actual measurement experiments.
- Open Access
Time-Varying Current Estimation Method for SINS/DVL Integrated Navigation Based on Augmented Observation Algorithm
To address the problem of the bottom velocity being directly affected by the time-varying ocean currents when DVL operates in the water observation mode, it cannot be directly used for combined SINS/DVL navigation. Existing methods generally approximate small-scale, short-term currents as constant; however, this assumption is inconsistent with reality over longer durations. When the conventional Kalman filter (KF) algorithm incorporates currents into the state vector, their velocities become entangled with the SINS errors, limiting estimation accuracy. This paper proposes an augmented observation algorithm (AOA) that achieves error decoupling by enhancing DVL observation and deriving the observable current velocity equation without needing external observation information. This approach effectively estimates time-varying currents. The results from simulations and shipboard tests show that, compared to the reference algorithm (Augmented Observation Quantity Filtering algorithm (AOQ)), the proposed AOA significantly decreases the root mean square error (RMSE) of time-varying current velocity estimation by more than 67%. Additionally, the RMSE of the positioning accuracy of the combined SINS/DVL navigation is improved by over 68%.
Open AccessTime-Varying Current Estimation Method for SINS/DVL Integrated Navigation Based on Augmented Observation Algorithm
To address the problem of the bottom velocity being directly affected by the time-varying ocean currents when DVL operates in the water observation mode, it cannot be directly used for combined SINS/DVL navigation. Existing methods generally approximate small-scale, short-term currents as constant; however, this assumption is inconsistent with reality over longer durations. When the conventional Kalman filter (KF) algorithm incorporates currents into the state vector, their velocities become entangled with the SINS errors, limiting estimation accuracy. This paper proposes an augmented observation algorithm (AOA) that achieves error decoupling by enhancing DVL observation and deriving the observable current velocity equation without needing external observation information. This approach effectively estimates time-varying currents. The results from simulations and shipboard tests show that, compared to the reference algorithm (Augmented Observation Quantity Filtering algorithm (AOQ)), the proposed AOA significantly decreases the root mean square error (RMSE) of time-varying current velocity estimation by more than 67%. Additionally, the RMSE of the positioning accuracy of the combined SINS/DVL navigation is improved by over 68%.
- Open Access
- 3 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 597
An Envelope-to-Cycle Difference Compensation Method for eLoran Signals in Seawater Based on a Variable Step Size Least Mean Square Algorithm
The dispersion effect of seawater can cause the envelop distortion of underwater eLoran signals, which causes the envelope-to-cycle difference (ECD) to exceed the standard range. Furthermore, it results in incorrect cycle identification and significant positioning errors. However, few studies have focused on the distortion caused by the dispersion effect. In this study, we propose an accurate underwater eLoran ECD compensation method based on a variable step size least mean square (VSS-LMS) algorithm. First, a systematic modeling approach was employed to investigate the impact of dispersion effects on Loran signals. Second, the VSS-LMS algorithm was introduced to update the filter weight vector in response to discrepancies in the input signal. Finally, the input signal was subjected to an adaptive transversal filtering process, resulting in an output signal that adhered to the specifications of the ECD standard. The efficacy and superiority of the proposed algorithm were demonstrated by experimentation and simulation. When the depth of seawater exceeds 2 m, the ECD value of the original eLoran signal exceeds the standard range, precluding the possibility of cycle identification. However, when the depth of seawater reaches 4 m, the ECD of the signal compensated by the proposed algorithm adaptively compensates for the normal range, thereby enabling the accurate recognition of cycles.
- 3 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 597
Open AccessAn Envelope-to-Cycle Difference Compensation Method for eLoran Signals in Seawater Based on a Variable Step Size Least Mean Square Algorithm
The dispersion effect of seawater can cause the envelop distortion of underwater eLoran signals, which causes the envelope-to-cycle difference (ECD) to exceed the standard range. Furthermore, it results in incorrect cycle identification and significant positioning errors. However, few studies have focused on the distortion caused by the dispersion effect. In this study, we propose an accurate underwater eLoran ECD compensation method based on a variable step size least mean square (VSS-LMS) algorithm. First, a systematic modeling approach was employed to investigate the impact of dispersion effects on Loran signals. Second, the VSS-LMS algorithm was introduced to update the filter weight vector in response to discrepancies in the input signal. Finally, the input signal was subjected to an adaptive transversal filtering process, resulting in an output signal that adhered to the specifications of the ECD standard. The efficacy and superiority of the proposed algorithm were demonstrated by experimentation and simulation. When the depth of seawater exceeds 2 m, the ECD value of the original eLoran signal exceeds the standard range, precluding the possibility of cycle identification. However, when the depth of seawater reaches 4 m, the ECD of the signal compensated by the proposed algorithm adaptively compensates for the normal range, thereby enabling the accurate recognition of cycles.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
Adaptive Gravity-Aided Inertial Navigation Based on Characteristic Analysis of Marine Gravity Anomaly From Satellite Altimetry
With the improvement of resolution and precision of marine gravity anomaly data from satellite altimetry, the gravity matching navigation of underwater vehicles has been supported by background field data. To improve the accuracy, a multi-index model for analyzing the gravity background field characteristics is constructed, and an adaptive matching navigation algorithm is designed. First, the common single-index feature analysis methods are introduced, and their advantages and disadvantages are analyzed. The multi-index average statistical parameter (MASP) model applicable to the characterization of marine gravity anomaly background field is designed, and the reliability is verified by two satellite altimetric gravity anomaly datasets from the northwest Indian Ocean and the western Pacific Ocean. Then, an adaptive matching navigation algorithm is proposed by introducing the MASP model in the filtering process, which can adjust the filter structure in real time. Finally, the performance of the method is verified by about 30 h of field test. The matching results show that the proposed method can adjust the filter structure adaptively and has better comprehensive performance.
- 15 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
Adaptive Gravity-Aided Inertial Navigation Based on Characteristic Analysis of Marine Gravity Anomaly From Satellite Altimetry
With the improvement of resolution and precision of marine gravity anomaly data from satellite altimetry, the gravity matching navigation of underwater vehicles has been supported by background field data. To improve the accuracy, a multi-index model for analyzing the gravity background field characteristics is constructed, and an adaptive matching navigation algorithm is designed. First, the common single-index feature analysis methods are introduced, and their advantages and disadvantages are analyzed. The multi-index average statistical parameter (MASP) model applicable to the characterization of marine gravity anomaly background field is designed, and the reliability is verified by two satellite altimetric gravity anomaly datasets from the northwest Indian Ocean and the western Pacific Ocean. Then, an adaptive matching navigation algorithm is proposed by introducing the MASP model in the filtering process, which can adjust the filter structure in real time. Finally, the performance of the method is verified by about 30 h of field test. The matching results show that the proposed method can adjust the filter structure adaptively and has better comprehensive performance.
- Open Access
An Improved Differential Evolution Adaptive Fuzzy PID Control Method for Gravity Measurement Stable Platform
In the platform gravimeter, the stabilization accuracy of the gravimetric stabilization platform is crucial to improve the accuracy of gravity value measurements due to its uncertainties, such as mechanical friction, inter-device coupling interference, and nonlinear disturbances. These cause fluctuations in the gravimetric stabilization platform system parameters and present nonlinear characteristics. To resolve the impact of the above problems on the control performance of the stabilization platform, an improved differential evolutionary adaptive fuzzy PID control (IDEAFC) algorithm is proposed. The proposed enhanced differential evolution algorithm is used to optimize the initial control parameters of the system adaptive fuzzy PID control algorithm to achieve accurate online adjustments of the gravimetric stabilization platform’s control parameters when it is subject to external disturbances or state changes and attain a high level of stabilization accuracy. The results of simulation tests, static stability experiments, and swaying experiments on the platform under laboratory conditions, as well as on-board experiments and shipboard experiments, all show that the improved differential evolution adaptive fuzzy PID control algorithm has a higher stability accuracy compared with the conventional control PID algorithm and traditional fuzzy control algorithm, proving the superiority, availability, and effectiveness of the algorithm.
Open AccessAn Improved Differential Evolution Adaptive Fuzzy PID Control Method for Gravity Measurement Stable Platform
In the platform gravimeter, the stabilization accuracy of the gravimetric stabilization platform is crucial to improve the accuracy of gravity value measurements due to its uncertainties, such as mechanical friction, inter-device coupling interference, and nonlinear disturbances. These cause fluctuations in the gravimetric stabilization platform system parameters and present nonlinear characteristics. To resolve the impact of the above problems on the control performance of the stabilization platform, an improved differential evolutionary adaptive fuzzy PID control (IDEAFC) algorithm is proposed. The proposed enhanced differential evolution algorithm is used to optimize the initial control parameters of the system adaptive fuzzy PID control algorithm to achieve accurate online adjustments of the gravimetric stabilization platform’s control parameters when it is subject to external disturbances or state changes and attain a high level of stabilization accuracy. The results of simulation tests, static stability experiments, and swaying experiments on the platform under laboratory conditions, as well as on-board experiments and shipboard experiments, all show that the improved differential evolution adaptive fuzzy PID control algorithm has a higher stability accuracy compared with the conventional control PID algorithm and traditional fuzzy control algorithm, proving the superiority, availability, and effectiveness of the algorithm.
- Open Access
- 11 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (18) , 4535
Analysis of the Long-Term Characteristics of BDS On-Orbit Satellite Atomic Clock: Since BDS-3 Was Officially Commissioned
Satellite atomic clocks are the key elements for position, navigation, and timing services of the Global navigation satellite system (GNSS); it is necessary to research the characteristics of BDS-3 on-orbit satellite atomic clocks for their further optimization. In this study, clock offset data with a duration of 620 days since BDS-3 was officially commissioned were applied to long-term characteristic analysis. To begin with, the precision clock offset data of Deutsches geoforschungs zentrum (GFZ) processed by a MAD-based method were used as reliable test data. Herein, the working principle and main characteristics of satellite atomic clocks are analyzed and discussed, and thus, a comprehensive long-term characteristic analysis scheme is designed. On this basis, the performance indicators—mainly including physical parameters, periodic characteristics, frequency drift rate, frequency accuracy, frequency stability—were calculated and analyzed respectively, revealing the long-term characteristics of the BDS in orbit satellite atomic clocks during the test period. The results of experimental data testify that the performance of BDS-3 satellite atomic clocks is significantly superior to that of BDS-2, especially in terms of drift rate and frequency stability, and the performance of passive hydrogen maser (PHM) is generally superior to that of rubidium atomic frequency standards (RAFS). Within about half a year since BDS-3 was officially commissioned, the frequency stability of BDS-3 satellite atomic clock gradually improved and then reached the order of 10−15, reflecting the effectiveness of system maintenance and inter-satellite link. Furthermore, some novel conclusions are drawn, such as the long-term period term of the fitting residual and drift rate, which may be caused by the earth’s revolution.
- 11 September 2022
- Published by MDPI AG in Remote Sensing
- Vol. 14 (18) , 4535
Open AccessAnalysis of the Long-Term Characteristics of BDS On-Orbit Satellite Atomic Clock: Since BDS-3 Was Officially Commissioned
Satellite atomic clocks are the key elements for position, navigation, and timing services of the Global navigation satellite system (GNSS); it is necessary to research the characteristics of BDS-3 on-orbit satellite atomic clocks for their further optimization. In this study, clock offset data with a duration of 620 days since BDS-3 was officially commissioned were applied to long-term characteristic analysis. To begin with, the precision clock offset data of Deutsches geoforschungs zentrum (GFZ) processed by a MAD-based method were used as reliable test data. Herein, the working principle and main characteristics of satellite atomic clocks are analyzed and discussed, and thus, a comprehensive long-term characteristic analysis scheme is designed. On this basis, the performance indicators—mainly including physical parameters, periodic characteristics, frequency drift rate, frequency accuracy, frequency stability—were calculated and analyzed respectively, revealing the long-term characteristics of the BDS in orbit satellite atomic clocks during the test period. The results of experimental data testify that the performance of BDS-3 satellite atomic clocks is significantly superior to that of BDS-2, especially in terms of drift rate and frequency stability, and the performance of passive hydrogen maser (PHM) is generally superior to that of rubidium atomic frequency standards (RAFS). Within about half a year since BDS-3 was officially commissioned, the frequency stability of BDS-3 satellite atomic clock gradually improved and then reached the order of 10−15, reflecting the effectiveness of system maintenance and inter-satellite link. Furthermore, some novel conclusions are drawn, such as the long-term period term of the fitting residual and drift rate, which may be caused by the earth’s revolution.
- Open Access
- 16 June 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-10
Improved GM (1,1) Model by Optimizing Initial Condition to Predict Satellite Clock Bias
The variation law of satellite clock bias (SCB) can be regarded as a grey system because the spaceborne atomic clock is very sensitive and vulnerable to many factors. GM (1,1) model is the core and foundation of the grey system, which has been highly valued and successfully applied in SCB prediction since its production. However, there are still some problems to be further studied such as the lack of stability of its prediction effect in practical application. In view of this, an improved GM (1,1) model by optimizing the initial condition has been proposed in this paper so as to increase the prediction performance. The new initial condition is obtained by the weighted combination of the latest and oldest components of the original clock bias sequence. And the weight values of these two components are acquired from a method of minimizing the sum of squares of fitting errors. We adopt GPS rapid precision SCB data provided by the International GNSS Service (IGS) for 15 mins, 30 mins, 1 h, 3 h, 6 h, 12 h, and 24 h prediction experiments. The results show that the improved GM (1,1) model is effective and feasible, and its prediction accuracy and stability are significantly better than those of the traditional GM (1,1) model, ARIMA model, and QP model, even for the SCB signal with obvious fluctuation.
- 16 June 2022
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2022, 1-10
Open AccessImproved GM (1,1) Model by Optimizing Initial Condition to Predict Satellite Clock Bias
The variation law of satellite clock bias (SCB) can be regarded as a grey system because the spaceborne atomic clock is very sensitive and vulnerable to many factors. GM (1,1) model is the core and foundation of the grey system, which has been highly valued and successfully applied in SCB prediction since its production. However, there are still some problems to be further studied such as the lack of stability of its prediction effect in practical application. In view of this, an improved GM (1,1) model by optimizing the initial condition has been proposed in this paper so as to increase the prediction performance. The new initial condition is obtained by the weighted combination of the latest and oldest components of the original clock bias sequence. And the weight values of these two components are acquired from a method of minimizing the sum of squares of fitting errors. We adopt GPS rapid precision SCB data provided by the International GNSS Service (IGS) for 15 mins, 30 mins, 1 h, 3 h, 6 h, 12 h, and 24 h prediction experiments. The results show that the improved GM (1,1) model is effective and feasible, and its prediction accuracy and stability are significantly better than those of the traditional GM (1,1) model, ARIMA model, and QP model, even for the SCB signal with obvious fluctuation.