Giacomo Lorenzin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Giacomo Lorenzin has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Claudia Cancellieri
Laboratory for Joining Technologies and Corrosion Empa, Swiss Federal Laboratories for Materials Science and Technology Dübendorf Switzerland
8 shared publications - Jeyun Yeom
Empa, Swiss Federal Laboratories for Materials Science and Technology, Laboratory for Joining Technologies and Corrosion 1 , Ueberlandstrasse 129, Duebendorf CH-8600
3 shared publications - Jolanta Janczak-Rusch
Laboratory for Joining Technologies and Corrosion, Empa - Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
3 shared publications - Vladyslav Turlo
Laboratory for Advanced Materials Processing, EMPA - Swiss Federal Laboratories for Materials Science and Technology, Thun, Switzerland
3 shared publications Javier F. Troncoso
2 shared publications- Lars P. H. Jeurgens
Laboratory for Joining Technologies and Corrosion Empa, Swiss Federal Laboratories for Materials Science and Technology Dübendorf Switzerland
2 shared publications
Latest Publications
- Open Access
- 17 July 2025
- Published by Elsevier in Acta Materialia
- Vol. 297
Origin of interface stress enhancement and compressive-to-tensile stress transition in immiscible nanomultilayers
- 17 July 2025
- Published by Elsevier in Acta Materialia
- Vol. 297
Open AccessOrigin of interface stress enhancement and compressive-to-tensile stress transition in immiscible nanomultilayers
- Open Access
- 1 October 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (10)
Effect of residual stress and microstructure on mechanical properties of sputter-grown Cu/W nanomultilayers
The combination of the high wear resistance and mechanical strength of W with the high thermal conductivity of Cu makes the Cu/W system an attractive candidate material for heat sinks in plasma experiments and for radiation tolerance applications. However, the resulting mechanical properties of multilayers and coatings strongly depend on the microstructure of the layers. In this work, the mechanical properties of Cu/W nanomultilayers with different densities of internal interfaces are systematically investigated for two opposite in-plane stress states and critically discussed in comparison with the literature. Atomistic simulations with the state-of-the-art neural network potential are used to explain the experimental findings of Young’s modulus and hardness. The results suggest that the microstructure, specifically the excess free volume associated with porosity and interface disorder interconnected with the stress state, has a great impact on the mechanical properties, notably Young’s modulus of Cu/W nanomultilayers.
- 1 October 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (10)
Open AccessEffect of residual stress and microstructure on mechanical properties of sputter-grown Cu/W nanomultilayers
The combination of the high wear resistance and mechanical strength of W with the high thermal conductivity of Cu makes the Cu/W system an attractive candidate material for heat sinks in plasma experiments and for radiation tolerance applications. However, the resulting mechanical properties of multilayers and coatings strongly depend on the microstructure of the layers. In this work, the mechanical properties of Cu/W nanomultilayers with different densities of internal interfaces are systematically investigated for two opposite in-plane stress states and critically discussed in comparison with the literature. Atomistic simulations with the state-of-the-art neural network potential are used to explain the experimental findings of Young’s modulus and hardness. The results suggest that the microstructure, specifically the excess free volume associated with porosity and interface disorder interconnected with the stress state, has a great impact on the mechanical properties, notably Young’s modulus of Cu/W nanomultilayers.
- Open Access
- 2 July 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (6) , 4533-4539
Controlled Directional Cu Outflow in Cu/W Nanomultilayers
In this study, we have investigated the feasibility of localized, focused ion beam (FIB)-stimulated Cu outflow in Cu/W nanomultilayers (NMLs) for manufacturing of heterogeneous micro-/nanojoints. Sub-micron-sized trenches were created on the nanomultilayer surface prior to heat treatment with the aim of directing the diffusion of Cu to locally defined NML surface regions. Cu outflow was triggered by annealing at 500 °C in a reducing atmosphere and lead to formation of (sub-)micron-sized Cu particles that are firmly joined to the W-terminated Cu/W NML. The results show that not only the depth of trenches (i.e., the parameters of the FIB treatment), but also the stress and the microstructure of the NMLs influence the Cu directional transport. The Cu outflow was found to be much more pronounced when the multilayer has a disordered microstructure with pores and open grain boundaries, as observed for NMLs with a tensile stress. We have thus demonstrated that FIB surface patterning enables the localized generation of (sub-)micron-sized Cu particles that can be used for manufacturing of micro-/nanojoints.
- 2 July 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (6) , 4533-4539
Open AccessControlled Directional Cu Outflow in Cu/W Nanomultilayers
In this study, we have investigated the feasibility of localized, focused ion beam (FIB)-stimulated Cu outflow in Cu/W nanomultilayers (NMLs) for manufacturing of heterogeneous micro-/nanojoints. Sub-micron-sized trenches were created on the nanomultilayer surface prior to heat treatment with the aim of directing the diffusion of Cu to locally defined NML surface regions. Cu outflow was triggered by annealing at 500 °C in a reducing atmosphere and lead to formation of (sub-)micron-sized Cu particles that are firmly joined to the W-terminated Cu/W NML. The results show that not only the depth of trenches (i.e., the parameters of the FIB treatment), but also the stress and the microstructure of the NMLs influence the Cu directional transport. The Cu outflow was found to be much more pronounced when the multilayer has a disordered microstructure with pores and open grain boundaries, as observed for NMLs with a tensile stress. We have thus demonstrated that FIB surface patterning enables the localized generation of (sub-)micron-sized Cu particles that can be used for manufacturing of micro-/nanojoints.
- Open Access
- 6 June 2024
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 25 (1) , 2357536
The thermal stability and degradation mechanism of Cu/Mo nanomultilayers
The microstructural evolution of Cu/Mo nanomultilayers upon annealing was investigated by X-ray diffraction and transmission electron microscopy. The isothermal annealing process in the temperature ranges of 300–850°C was conducted to understand the thermal behavior of the sample and follow the transformation into a nanocomposite. Annealing at 600°C led to the initiation of grain grooving in the investigated nanomultilayer, and it degraded into a spheroidized nanocomposite structure at 800°C. The sample kept the as-deposited Cu {111}//Mo{110} fiber texture up to 850°C. The residual stress was investigated to explain microstructure changes. The activation energy of degradation kinetics of Cu/Mo nanomultilayers was determined to understand the rate-determining mechanism for the degradation of nanolaminate structures.
- 6 June 2024
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 25 (1) , 2357536
Open AccessThe thermal stability and degradation mechanism of Cu/Mo nanomultilayers
The microstructural evolution of Cu/Mo nanomultilayers upon annealing was investigated by X-ray diffraction and transmission electron microscopy. The isothermal annealing process in the temperature ranges of 300–850°C was conducted to understand the thermal behavior of the sample and follow the transformation into a nanocomposite. Annealing at 600°C led to the initiation of grain grooving in the investigated nanomultilayer, and it degraded into a spheroidized nanocomposite structure at 800°C. The sample kept the as-deposited Cu {111}//Mo{110} fiber texture up to 850°C. The residual stress was investigated to explain microstructure changes. The activation energy of degradation kinetics of Cu/Mo nanomultilayers was determined to understand the rate-determining mechanism for the degradation of nanolaminate structures.
- Open Access
- 28 March 2024
- Published by Elsevier in Applied Surface Science
- Vol. 661
Experimental and ab initio derivation of interface stress in nanomultilayered coatings: Application to immiscible Cu/W system with variable in-plane stress
- 28 March 2024
- Published by Elsevier in Applied Surface Science
- Vol. 661
Open AccessExperimental and ab initio derivation of interface stress in nanomultilayered coatings: Application to immiscible Cu/W system with variable in-plane stress
- Open Access
- 30 November 2023
- Published by Elsevier in Scripta Materialia
- Vol. 242
Explaining the effect of in-plane strain on thermal degradation kinetics of Cu/W nano-multilayers
- 30 November 2023
- Published by Elsevier in Scripta Materialia
- Vol. 242
Open AccessExplaining the effect of in-plane strain on thermal degradation kinetics of Cu/W nano-multilayers
- 12 October 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 18 (4) , 044030
Measurement and Simulation of Mechanical and Optical Properties of Sputtered Amorphous SiC Coatings
In this work we report on the extensive characterization of amorphous silicon carbide (-SiC) coatings prepared by physical deposition methods. Our investigation is performed within the perspective application of -SiC as an optical material for high-precision optical experiments and, in particular, in gravitational wave interferometry. We compare the results obtained with two different sputtering systems [a standard radio frequency (rf) magnetron sputtering and an ion-beam sputtering] to grasp the impact of two different setups on the repeatability of the results. After a thorough characterization of structural, morphological, and compositional characteristics of the prepared samples, we focus on a detailed study of the optical and mechanical losses in those materials. Mechanical losses are further investigated from a microscopic point of view by comparing our experimental results with molecular dynamic simulations of the amorphous SiC structure: first we define a protocol to generate a numerical model of the amorphous film, capturing the main features of the real system; then we simulate its dynamical behavior upon deformation in order to obtain its mechanical response.- 12 October 2022
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 18 (4) , 044030
Measurement and Simulation of Mechanical and Optical Properties of Sputtered Amorphous SiC Coatings
In this work we report on the extensive characterization of amorphous silicon carbide (-SiC) coatings prepared by physical deposition methods. Our investigation is performed within the perspective application of -SiC as an optical material for high-precision optical experiments and, in particular, in gravitational wave interferometry. We compare the results obtained with two different sputtering systems [a standard radio frequency (rf) magnetron sputtering and an ion-beam sputtering] to grasp the impact of two different setups on the repeatability of the results. After a thorough characterization of structural, morphological, and compositional characteristics of the prepared samples, we focus on a detailed study of the optical and mechanical losses in those materials. Mechanical losses are further investigated from a microscopic point of view by comparing our experimental results with molecular dynamic simulations of the amorphous SiC structure: first we define a protocol to generate a numerical model of the amorphous film, capturing the main features of the real system; then we simulate its dynamical behavior upon deformation in order to obtain its mechanical response.- Open Access
- 30 August 2022
- Published by Elsevier in Acta Materialia
- Vol. 240
Tensile and compressive stresses in Cu/W multilayers: Correlation with microstructure, thermal stability, and thermal conductivity
- 30 August 2022
- Published by Elsevier in Acta Materialia
- Vol. 240
Open AccessTensile and compressive stresses in Cu/W multilayers: Correlation with microstructure, thermal stability, and thermal conductivity
- Open Access
- 10 June 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (22) , 225304
Stress tuning in sputter-grown Cu and W films for Cu/W nanomultilayer design
Controlling growth stresses during thin film fabrication is of paramount importance to solve reliability issues during operation of functional thin films in harsh environments. A combination of different methods for thin-film stress determination, such as in situ wafer curvature and ex situ x-ray diffraction, is usually required to reveal and tailor growth stresses in thin film systems, as well as to extract interface stress contributions in multilayered coatings. In this article, the tuning of intrinsic growth stresses in thin films of Cu and W, as grown by magnetron sputtering, was performed by varying the Ar pressure and gun power during thin-film deposition. The average growth stress in Cu and W thin films could be tuned between tensile and compressive. Next, the thus obtained knowledge on stress engineering of Cu and W single layers was applied to investigate the corresponding intrinsic stresses in Cu/W nanomultilayer coatings, for which interface stress was found to play an important role.
- 10 June 2022
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 131 (22) , 225304
Open AccessStress tuning in sputter-grown Cu and W films for Cu/W nanomultilayer design
Controlling growth stresses during thin film fabrication is of paramount importance to solve reliability issues during operation of functional thin films in harsh environments. A combination of different methods for thin-film stress determination, such as in situ wafer curvature and ex situ x-ray diffraction, is usually required to reveal and tailor growth stresses in thin film systems, as well as to extract interface stress contributions in multilayered coatings. In this article, the tuning of intrinsic growth stresses in thin films of Cu and W, as grown by magnetron sputtering, was performed by varying the Ar pressure and gun power during thin-film deposition. The average growth stress in Cu and W thin films could be tuned between tensile and compressive. Next, the thus obtained knowledge on stress engineering of Cu and W single layers was applied to investigate the corresponding intrinsic stresses in Cu/W nanomultilayer coatings, for which interface stress was found to play an important role.