Zhiqiang Wei
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhiqiang Wei has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Cong Liu
College of Air Traffic Management, Civil Aviation University of China, Tianjin 300300, China
2 shared publications Fei Liu
2 shared publications- Yu Wang
College of Air Traffic Management, Civil Aviation University of China, Tianjin 300300, China
2 shared publications - Baiqing Li
College of Aeronautical Engineering, Civil Aviation University of China, Tianjin 300300, China
1 shared publication Chao Wang
School of Air Traffic Management, Civil Aviation University of China, Tianjin, 300300, China
1 shared publicationChung Joon
Ryerson University
1 shared publication
Latest Publications
- Open Access
Effects of Vectorial Inflow on the Multi-Axis Aerodynamic Performance of a Small-Sized UAV Rotor
Variations in flight trajectory and velocity during vertical takeoff, transition, and level flight cause substantial changes in the relative inflow vector of multi-rotor unmanned aerial vehicles (UAVs). In urban environments, disturbances from complex wind fields further increase the uncertainty of inflow conditions. This study investigates the aerodynamic characteristics of a fixed-pitch small-sized UAV rotor under varying inflow angles, velocities, and rotational speeds using a subsonic return-flow wind tunnel. The experimental setup enables inflow angle control from −90° to +90° via a turntable. Results indicate that, without incoming flow, the axial thrust and torque coefficients remain nearly constant. With inflow, both coefficients become highly sensitive to velocity in the 2000–5000 rpm range, with deviations up to four times those under static conditions. The in-plane lateral force along the X-axis increases significantly with inflow velocity, reaching about half the axial force, while the Y-axis component is minor and negligible under symmetric configurations. Pitching and rolling moments increase rapidly once inflow velocity exceeds 8 m/s, surpassing the axial torque and exhibiting strong directional asymmetry around ±15° inflow angles. The results demonstrate coupled aerodynamic force and moment behavior of small rotors under complex inflow, providing experimental evidence for improved dynamic modeling, control design, and the energy optimization of UAVs operating in turbulent wind environments.
Open AccessEffects of Vectorial Inflow on the Multi-Axis Aerodynamic Performance of a Small-Sized UAV Rotor
Variations in flight trajectory and velocity during vertical takeoff, transition, and level flight cause substantial changes in the relative inflow vector of multi-rotor unmanned aerial vehicles (UAVs). In urban environments, disturbances from complex wind fields further increase the uncertainty of inflow conditions. This study investigates the aerodynamic characteristics of a fixed-pitch small-sized UAV rotor under varying inflow angles, velocities, and rotational speeds using a subsonic return-flow wind tunnel. The experimental setup enables inflow angle control from −90° to +90° via a turntable. Results indicate that, without incoming flow, the axial thrust and torque coefficients remain nearly constant. With inflow, both coefficients become highly sensitive to velocity in the 2000–5000 rpm range, with deviations up to four times those under static conditions. The in-plane lateral force along the X-axis increases significantly with inflow velocity, reaching about half the axial force, while the Y-axis component is minor and negligible under symmetric configurations. Pitching and rolling moments increase rapidly once inflow velocity exceeds 8 m/s, surpassing the axial torque and exhibiting strong directional asymmetry around ±15° inflow angles. The results demonstrate coupled aerodynamic force and moment behavior of small rotors under complex inflow, providing experimental evidence for improved dynamic modeling, control design, and the energy optimization of UAVs operating in turbulent wind environments.
- Open Access
Effects of Wake Separation on Aerodynamic Interference Between Rotors in Urban Low-Altitude UAV Formation Flight
In recent years, unmanned aerial vehicle (UAV) formation flight has become an effective strategy for urban air mobility (UAM). However, close rotor separation during formation flight leads to complex aerodynamic interference between rotors, significantly affecting UAV flight performance and operational safety. This study systematically examines the effects of axial and lateral rotor separation on the rotor’s thrust performance through wind tunnel experiments. The tests simulate horizontal, vertical, and hovering states by generating relative airflow in the wind tunnel, focusing primarily on the thrust coefficient changes of the bottom rotor at various separations. The results are compared with a single rotor operating under the same conditions without wake interference. Additionally, computational fluid dynamics (CFD) simulations using the Fluent software were conducted to investigate the effect of wake interactions by analyzing the velocity flow field between the two rotors in different separations. Both the experimental and simulation results demonstrate that rotor aerodynamic performance is notably influenced by wake interactions. Under hovering and vertical states, substantial aerodynamic interference occurs in the region directly beneath the top rotor, within 1D ≤ ≤ 3D. This interference gradually diminishes as the rotor separation increases. Additionally, the thrust coefficient of the bottom rotor decreases with increasing flight speed due to the wake, and at higher flight speeds, the wake tends to contract. When the lateral separation is X = 0D, the mid-sectional flow field of the two rotors exhibits symmetry; however, with lateral separation, the symmetry of the bottom rotor’s wake velocity field is disrupted. During the horizontal flight, the rotor wake tilts backward due to the relative airflow, and the extent of this influence is governed by both rotor rotational speed and flight velocity. Therefore, when UAVs operate in formation, it is crucial to account for these factors affecting aerodynamic performance, and rotor separation must be optimized to enhance flight safety and efficiency.Open AccessEffects of Wake Separation on Aerodynamic Interference Between Rotors in Urban Low-Altitude UAV Formation Flight
In recent years, unmanned aerial vehicle (UAV) formation flight has become an effective strategy for urban air mobility (UAM). However, close rotor separation during formation flight leads to complex aerodynamic interference between rotors, significantly affecting UAV flight performance and operational safety. This study systematically examines the effects of axial and lateral rotor separation on the rotor’s thrust performance through wind tunnel experiments. The tests simulate horizontal, vertical, and hovering states by generating relative airflow in the wind tunnel, focusing primarily on the thrust coefficient changes of the bottom rotor at various separations. The results are compared with a single rotor operating under the same conditions without wake interference. Additionally, computational fluid dynamics (CFD) simulations using the Fluent software were conducted to investigate the effect of wake interactions by analyzing the velocity flow field between the two rotors in different separations. Both the experimental and simulation results demonstrate that rotor aerodynamic performance is notably influenced by wake interactions. Under hovering and vertical states, substantial aerodynamic interference occurs in the region directly beneath the top rotor, within 1D ≤ ≤ 3D. This interference gradually diminishes as the rotor separation increases. Additionally, the thrust coefficient of the bottom rotor decreases with increasing flight speed due to the wake, and at higher flight speeds, the wake tends to contract. When the lateral separation is X = 0D, the mid-sectional flow field of the two rotors exhibits symmetry; however, with lateral separation, the symmetry of the bottom rotor’s wake velocity field is disrupted. During the horizontal flight, the rotor wake tilts backward due to the relative airflow, and the extent of this influence is governed by both rotor rotational speed and flight velocity. Therefore, when UAVs operate in formation, it is crucial to account for these factors affecting aerodynamic performance, and rotor separation must be optimized to enhance flight safety and efficiency. - 5 July 2024
- Published by Springer Nature
- p. 1731-1741
Methods for Combination Optimization of Flight Routes and Flight Altitude Considering Restrictions in Free Route Airspace
- 5 July 2024
- Published by Springer Nature
- p. 1731-1741
Methods for Combination Optimization of Flight Routes and Flight Altitude Considering Restrictions in Free Route Airspace
- Open Access
- 1 July 2024
- Published by Elsevier in Transportation Research Part C: Emerging Technologies
- Vol. 165
Autonomous interval management of multi-aircraft based on multi-agent reinforcement learning considering fuel consumption
- 1 July 2024
- Published by Elsevier in Transportation Research Part C: Emerging Technologies
- Vol. 165
Open AccessAutonomous interval management of multi-aircraft based on multi-agent reinforcement learning considering fuel consumption
- Open Access
- 15 May 2024
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 37 (9) , 347-368
DBN-GABP model for estimation of aircraft wake vortex parameters using Lidar data
- 15 May 2024
- Published by Elsevier in Chinese Journal of Aeronautics
- Vol. 37 (9) , 347-368
Open AccessDBN-GABP model for estimation of aircraft wake vortex parameters using Lidar data
- Open Access
- 16 June 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-8
Research on the Combination Optimization Method of Aircraft Climb Parameters Considering the Influence of Pollution Emissions
In order to find the optimum climb parameters for decreasing aircraft pollution emissions, we establish a calculation model of aircraft pollutant emissions to thoroughly examine the economy of aircraft operation and its impact on the environment, based on the International Civil Aviation Organization reference emission data and Boeing Method 2 which can calculate pollutant emissions in different flight phases by correcting the ICAO emission data. Firstly, we propose the concept of integrated flight cost considering the effect of emissions and establish its calculation model. Secondly, we establish the climb speed optimization models based on the traditional flight cost and integrated flight cost. Then, we analyze the effect of climb performance on the integrated flight cost. Next, we establish a combined optimization model of indicated airspeed and thrust using the genetic algorithm. The model simulation and result analysis are carried out using a wide-body aircraft. Finally, we analyze the effect of the optimization parameters and the sensitivity of the pollution index. The results show that the decrease in the flight speed and thrust effectively reduces the cost of pollutant emission during flight. The combination of (Vc, Tr) with the smallest integrated flight cost reduces the integrated flight cost by 1.28 and emission cost by 4.56.
- 16 June 2022
- Published by Hindawi Limited in Journal of Advanced Transportation
- Vol. 2022, 1-8
Open AccessResearch on the Combination Optimization Method of Aircraft Climb Parameters Considering the Influence of Pollution Emissions
In order to find the optimum climb parameters for decreasing aircraft pollution emissions, we establish a calculation model of aircraft pollutant emissions to thoroughly examine the economy of aircraft operation and its impact on the environment, based on the International Civil Aviation Organization reference emission data and Boeing Method 2 which can calculate pollutant emissions in different flight phases by correcting the ICAO emission data. Firstly, we propose the concept of integrated flight cost considering the effect of emissions and establish its calculation model. Secondly, we establish the climb speed optimization models based on the traditional flight cost and integrated flight cost. Then, we analyze the effect of climb performance on the integrated flight cost. Next, we establish a combined optimization model of indicated airspeed and thrust using the genetic algorithm. The model simulation and result analysis are carried out using a wide-body aircraft. Finally, we analyze the effect of the optimization parameters and the sensitivity of the pollution index. The results show that the decrease in the flight speed and thrust effectively reduces the cost of pollutant emission during flight. The combination of (Vc, Tr) with the smallest integrated flight cost reduces the integrated flight cost by 1.28 and emission cost by 4.56.
- 10 January 2022
- Published by Springer Nature in International Journal of Aeronautical and Space Sciences
- Vol. 23 (2) , 406-418
Research on Aircraft Wake Vortex Evolution and Wake Encounter in Upper Airspace
- 10 January 2022
- Published by Springer Nature in International Journal of Aeronautical and Space Sciences
- Vol. 23 (2) , 406-418
Research on Aircraft Wake Vortex Evolution and Wake Encounter in Upper Airspace
- 8 June 2019
- Published by Springer Nature in Lecture Notes in Electrical Engineering
- p. 2001-2022
Calculation and Analysis of Aircraft Pollution Emissions in the Take-off Phase
- 8 June 2019
- Published by Springer Nature in Lecture Notes in Electrical Engineering
- p. 2001-2022
Calculation and Analysis of Aircraft Pollution Emissions in the Take-off Phase
- 22 July 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1097-1103
Calculation of Long Range Cruise Performance Based on the BADA Model
The method of high-accuracy and high-speed calculation of flight performance data is the key point of air traffic automation and simulations. The Base of Aircraft Data (BADA) performance model provided by the Euro-control Experiment Centre (EEC) has been widely used by international research organizations to calculate the aircraft performance data. The mode can calculate the fixed mach number cruise data, but it cannot calculate the long range cruise mode (LRC) flight data as is mostly adopted by the airlines in order to save fuel or flight cost. Based on the BADA model and related parameters, this paper studies the methods used to calculate the LRC cruise mach number, and also calculates the data for the B737-800 aircraft. The results are compared with calculations obtained by INFLT in the same conditions, which shows that the accuracy and calculating speed can be accepted by the research of ATC automation and simulations. The flight modes between fixed cruise mach number and LRC are also compared in the end, which shows that the LRC cruise mode can decrease the operation cost for airlines by saving cruise fuel consumption.
- 22 July 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1097-1103
Calculation of Long Range Cruise Performance Based on the BADA Model
The method of high-accuracy and high-speed calculation of flight performance data is the key point of air traffic automation and simulations. The Base of Aircraft Data (BADA) performance model provided by the Euro-control Experiment Centre (EEC) has been widely used by international research organizations to calculate the aircraft performance data. The mode can calculate the fixed mach number cruise data, but it cannot calculate the long range cruise mode (LRC) flight data as is mostly adopted by the airlines in order to save fuel or flight cost. Based on the BADA model and related parameters, this paper studies the methods used to calculate the LRC cruise mach number, and also calculates the data for the B737-800 aircraft. The results are compared with calculations obtained by INFLT in the same conditions, which shows that the accuracy and calculating speed can be accepted by the research of ATC automation and simulations. The flight modes between fixed cruise mach number and LRC are also compared in the end, which shows that the LRC cruise mode can decrease the operation cost for airlines by saving cruise fuel consumption.