Farouk Abdullah Rasheed
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Farouk Abdullah Rasheed has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Erfan Burhan Hussein
Department of Water Resources Engineering, College of Engineering, University of Sulaimani, Sulaymaniyah, Iraq
2 shared publications - Erfan Burhan Hussein
Department of Water Resources Engineering, College of Engineering, University of Sulaimani, Sulaymaniyah, 46001, Kurdistan Region, Iraq
2 shared publications - Ahmed Salih Mohammed
Civil Engineering Department College of Engineering, University of Sulaimani Sulaymaniyah Iraq
1 shared publication - Kawan F. Kayani
Department of Chemistry, College of Science, University of Sulaimani, Qlyasan Street, Sulaymaniyah 46001, Kurdistan Regional Government, Iraq
1 shared publication - Nihad Bahaaldeen Salih
University of Sulaimani
1 shared publication - Tavga Aram Abdalla
Civil Engineering Dept College of Engineering Technical Engineering Dept University of Sulaimani Northern Iraq. c Building & Construction Islamic University Najaf Iraq
1 shared publication
Latest Publications
- Open Access
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (59) , 50829-50843
Sustainable removal of methylene blue from wastewater using silica sand coated with Al 2 O 3 nanoparticles: a comparative study of batch and fixed bed column reactors
This research addresses the challenge of effectively removing methylene blue (MTB) dye from wastewater, given its high solubility and stubborn resistance to biodegradation. Iraqi silica sand coated with synthesized aluminum oxide nanoparticles (SSC–Al2O3) was investigated as a novel adsorbent for removing MTB molecules. This study demonstrated the adsorption capacity of SSC–Al2O3 in a batch configuration and predicted the breakthrough curves in a fixed-bed column reactor. At the ideal pH (6), under an agitation speed of 200 rpm and 75 minutes, isothermal equilibrium adsorption achieved 95.33% adsorption efficiency. Adsorption isotherms followed the Freundlich isotherm type. Experiments were carried out applying fixed bed columns with bed heights of 4 cm (78.5 g), 7 cm (137.4 g), and 10 cm (196.3 g) with a flow rate of 10 L h−1. The bed height of (10 cm) offered the longest breakthrough time and the least steep breakthrough curve. Higher flow rates decreased the adsorption capacity and yielded steeper breakthrough curves. FTIR analysis of SSC–Al2O3 showed that the hydroxyl, carboxyl, and amine functional groups were involved in bonding between MTB dye and the sorbent. This shows that SSC–Al2O3 has excellent ability in batch and continuous flow systems to treat industrial wastewater containing MTB dye.
- 16 December 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (59) , 50829-50843
Open AccessSustainable removal of methylene blue from wastewater using silica sand coated with Al 2 O 3 nanoparticles: a comparative study of batch and fixed bed column reactors
This research addresses the challenge of effectively removing methylene blue (MTB) dye from wastewater, given its high solubility and stubborn resistance to biodegradation. Iraqi silica sand coated with synthesized aluminum oxide nanoparticles (SSC–Al2O3) was investigated as a novel adsorbent for removing MTB molecules. This study demonstrated the adsorption capacity of SSC–Al2O3 in a batch configuration and predicted the breakthrough curves in a fixed-bed column reactor. At the ideal pH (6), under an agitation speed of 200 rpm and 75 minutes, isothermal equilibrium adsorption achieved 95.33% adsorption efficiency. Adsorption isotherms followed the Freundlich isotherm type. Experiments were carried out applying fixed bed columns with bed heights of 4 cm (78.5 g), 7 cm (137.4 g), and 10 cm (196.3 g) with a flow rate of 10 L h−1. The bed height of (10 cm) offered the longest breakthrough time and the least steep breakthrough curve. Higher flow rates decreased the adsorption capacity and yielded steeper breakthrough curves. FTIR analysis of SSC–Al2O3 showed that the hydroxyl, carboxyl, and amine functional groups were involved in bonding between MTB dye and the sorbent. This shows that SSC–Al2O3 has excellent ability in batch and continuous flow systems to treat industrial wastewater containing MTB dye.
- Top Cited PapersOpen Access
- 22 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (48) , 41061-41107
Emerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review
Comprehensive review of adsorption mechanisms and nanoadsorbents enabling sustainable water purification and heavy metal remediation.
- 22 October 2025
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 15 (48) , 41061-41107
Top Cited PapersOpen AccessEmerging nanotechnology approaches for sustainable water treatment and heavy metals removal: a comprehensive review
Comprehensive review of adsorption mechanisms and nanoadsorbents enabling sustainable water purification and heavy metal remediation.
- 28 March 2025
- Published by Elsevier in Journal of Contaminant Hydrology
- Vol. 272, 104553
Innovative use of recycled aluminum adsorbent for methylene blue adsorption and post-application for soil stabilization
- 28 March 2025
- Published by Elsevier in Journal of Contaminant Hydrology
- Vol. 272, 104553
Innovative use of recycled aluminum adsorbent for methylene blue adsorption and post-application for soil stabilization
- Open Access
- 1 January 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (1) , 145-157
The Effects of Different Water Types on the Dissolution, Physical Appearance, and Compressive Strength of Gypsum Rock
Dissolution of gypsum rock in water is significant, which may result in hydrocarbon reservoir formation and evaporate deposits. However, the complexity of the gypsum dissolution process is still of interest because of its uncleanness that requires more critical analysis. The objectives of this experimental study are emphasis on the dissolution characteristics of gypsum rock under room temperature and by various types of water; namely: deionized, tap, fresh, acidic, well, and normal rainwatre. In addition, the influences of dissolution on gypsum rock's mechanical and physical characteristics. Gypsum rock was obtained from Agjalar area, in the southwest of Sulaymaniyah city, Northern Iraq. Experimental results show that well water is the most effective type to dissolve gypsum and cause significant reductions in the mechanical characteristics of gypsum rock.
- 1 January 2023
- Published by Journal of Engineering in Journal of Engineering
- Vol. 29 (1) , 145-157
Open AccessThe Effects of Different Water Types on the Dissolution, Physical Appearance, and Compressive Strength of Gypsum Rock
Dissolution of gypsum rock in water is significant, which may result in hydrocarbon reservoir formation and evaporate deposits. However, the complexity of the gypsum dissolution process is still of interest because of its uncleanness that requires more critical analysis. The objectives of this experimental study are emphasis on the dissolution characteristics of gypsum rock under room temperature and by various types of water; namely: deionized, tap, fresh, acidic, well, and normal rainwatre. In addition, the influences of dissolution on gypsum rock's mechanical and physical characteristics. Gypsum rock was obtained from Agjalar area, in the southwest of Sulaymaniyah city, Northern Iraq. Experimental results show that well water is the most effective type to dissolve gypsum and cause significant reductions in the mechanical characteristics of gypsum rock.