Lorenzo Pucci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lorenzo Pucci has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Andrea Giorgetti
Department of Electrical, Electronic, and Information Engineering Guglielmo Marconi (DEI), University of Bologna, Bologna, Italy
13 shared publications - Enrico Paolini
CNIT/WiLab, DEI, University of Bologna, Cesena, Italy
8 shared publications Andrea Giorgetti
7 shared publications- Elia Favarelli
Department of Electrical, Electronic, and Information Engineering Guglielmo Marconi (DEI), University of Bologna, Bologna, Italy
6 shared publications - Elisabetta Matricardi
University of Bologna
4 shared publications Elia Favarelli
3 shared publications
Latest Publications
- Open Access
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 5007-5023
Bistatic THz Sensing With MIMO-OFDM: A Two-Stage Transmission Approach With Maximum Likelihood Estimation
The extensive bandwidth available at terahertz (THz) frequencies offers unprecedented opportunities for high-resolution sensing in next-generation integrated sensing and communications (ISAC) systems. This paper proposes a novel ultra-wideband bistatic MIMO-OFDM ISAC framework tailored for extended target (ET) tracking in cluttered indoor environments. To overcome the range ambiguity introduced by the increased subcarrier spacing—used to expand bandwidth without a proportional increase in complexity—we introduce a two-stage transmission scheme coupled with a generalized likelihood ratio test (GLRT)-based detection and estimation approach. In the first stage, a narrow sub-band is employed to obtain a coarse, ambiguity-free target estimate; in the second stage, the full system bandwidth is exploited to achieve refined super-resolution localization. To complement the detection and estimation process, we develop a low-complexity technique for static clutter removal based on coarse Doppler estimation and propose an ET tracking approach enhanced with a properly designed dynamic clutter suppression scheme. Finally, extensive numerical results, considering as a case study an automated guided vehicle (AGV) modeled as an ET, demonstrate that the proposed ISAC system effectively mitigates range ambiguities and clutter, achieving accurate AGV detection, localization, and tracking with negligible utilization of the resources.
- 1 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 7, 5007-5023
Open AccessBistatic THz Sensing With MIMO-OFDM: A Two-Stage Transmission Approach With Maximum Likelihood Estimation
The extensive bandwidth available at terahertz (THz) frequencies offers unprecedented opportunities for high-resolution sensing in next-generation integrated sensing and communications (ISAC) systems. This paper proposes a novel ultra-wideband bistatic MIMO-OFDM ISAC framework tailored for extended target (ET) tracking in cluttered indoor environments. To overcome the range ambiguity introduced by the increased subcarrier spacing—used to expand bandwidth without a proportional increase in complexity—we introduce a two-stage transmission scheme coupled with a generalized likelihood ratio test (GLRT)-based detection and estimation approach. In the first stage, a narrow sub-band is employed to obtain a coarse, ambiguity-free target estimate; in the second stage, the full system bandwidth is exploited to achieve refined super-resolution localization. To complement the detection and estimation process, we develop a low-complexity technique for static clutter removal based on coarse Doppler estimation and propose an ET tracking approach enhanced with a properly designed dynamic clutter suppression scheme. Finally, extensive numerical results, considering as a case study an automated guided vehicle (AGV) modeled as an ET, demonstrate that the proposed ISAC system effectively mitigates range ambiguities and clutter, achieving accurate AGV detection, localization, and tracking with negligible utilization of the resources.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- p. 1
Enhanced Data Fusion in Multistatic MIMO-OFDM Joint Sensing and Communication
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- p. 1
Open AccessEnhanced Data Fusion in Multistatic MIMO-OFDM Joint Sensing and Communication
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1
Position and Velocity Estimation Accuracy in MIMO-OFDM Radar Sensor Networks: A Fisher Information Analysis
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1
Open AccessPosition and Velocity Estimation Accuracy in MIMO-OFDM Radar Sensor Networks: A Fisher Information Analysis
- Open Access
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 9534-9546
Fundamental Limits of Target Parameter Estimation in OFDM-Based 3D NTN ISAC Systems
This work investigates the fundamental performance bound of three-dimensional (3D) target localization and velocity estimation in monostatic orthogonal frequency-division multiplexing (OFDM)-based ISAC systems equipped with uniform rectangular arrays (URAs). Using the equivalent Fisher information matrix, we derive the Cramér-Rao lower bound (CRLB) for position estimation in the 3D case and show how it can be naturally reduced to existing two-dimensional bounds when the URA becomes linear, thereby generalizing prior work. Additionally, under the practical assumption of known direction of motion, particularly relevant in applications such as road traffic monitoring with unmanned aerial vehicles (UAVs), we derive a closed-form CRLB expression for the estimation of target velocity magnitude. These CRLB expressions are then used to assess the impact of key system parameters, including subcarrier count, OFDM frame size, and array geometry, on estimation accuracy. The results provide actionable insights into UAV fleet deployment strategies, such as selecting the optimal sensing node based on spatial configuration and performance metrics. Numerical simulations validate the analytical bounds and highlight fundamental trade-offs in the design of future non-terrestrial network (NTN)-based ISAC architectures.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Communications Society
- Vol. 6, 9534-9546
Open AccessFundamental Limits of Target Parameter Estimation in OFDM-Based 3D NTN ISAC Systems
This work investigates the fundamental performance bound of three-dimensional (3D) target localization and velocity estimation in monostatic orthogonal frequency-division multiplexing (OFDM)-based ISAC systems equipped with uniform rectangular arrays (URAs). Using the equivalent Fisher information matrix, we derive the Cramér-Rao lower bound (CRLB) for position estimation in the 3D case and show how it can be naturally reduced to existing two-dimensional bounds when the URA becomes linear, thereby generalizing prior work. Additionally, under the practical assumption of known direction of motion, particularly relevant in applications such as road traffic monitoring with unmanned aerial vehicles (UAVs), we derive a closed-form CRLB expression for the estimation of target velocity magnitude. These CRLB expressions are then used to assess the impact of key system parameters, including subcarrier count, OFDM frame size, and array geometry, on estimation accuracy. The results provide actionable insights into UAV fleet deployment strategies, such as selecting the optimal sensing node based on spatial configuration and performance metrics. Numerical simulations validate the analytical bounds and highlight fundamental trade-offs in the design of future non-terrestrial network (NTN)-based ISAC architectures.
- Open Access
- 16 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Bistatic THz Sensing with MIMO-OFDM: A Two-Stage Transmission Approach with Maximum Likelihood Estimation
The extensive bandwidth available at THz frequencies offers unprecedented opportunities for high-resolution sensing in next-generation integrated sensing and communications (ISAC) systems. This paper proposes a novel ultra-wideband bistatic MIMO-OFDM ISAC framework tailored for extended target tracking in cluttered indoor environments. To overcome the range ambiguity introduced by the increased subcarrier spacingy—used to expand bandwidth without a proportional increase in complexity—we introduce a two-stage transmission scheme coupled with a GLRT-based detection and estimation approach. In the first stage, a narrow sub-band is employed to obtain a coarse, ambiguity-free target estimate; in the second stage, the full system bandwidth is exploited to achieve refined super-resolution localization. To complement the detection and estimation process, we develop a low-complexity technique for static clutter removal based on coarse Doppler estimation and propose an extended target tracking approach enhanced with a properly designed dynamic clutter suppression scheme. Finally, extensive numerical results demonstrate that the proposed ISAC system effectively mitigates range ambiguities and clutter, achieving accurate extended target detection, localization, and tracking with negligible utilization of the resources.
- 16 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessBistatic THz Sensing with MIMO-OFDM: A Two-Stage Transmission Approach with Maximum Likelihood Estimation
The extensive bandwidth available at THz frequencies offers unprecedented opportunities for high-resolution sensing in next-generation integrated sensing and communications (ISAC) systems. This paper proposes a novel ultra-wideband bistatic MIMO-OFDM ISAC framework tailored for extended target tracking in cluttered indoor environments. To overcome the range ambiguity introduced by the increased subcarrier spacingy—used to expand bandwidth without a proportional increase in complexity—we introduce a two-stage transmission scheme coupled with a GLRT-based detection and estimation approach. In the first stage, a narrow sub-band is employed to obtain a coarse, ambiguity-free target estimate; in the second stage, the full system bandwidth is exploited to achieve refined super-resolution localization. To complement the detection and estimation process, we develop a low-complexity technique for static clutter removal based on coarse Doppler estimation and propose an extended target tracking approach enhanced with a properly designed dynamic clutter suppression scheme. Finally, extensive numerical results demonstrate that the proposed ISAC system effectively mitigates range ambiguities and clutter, achieving accurate extended target detection, localization, and tracking with negligible utilization of the resources.
- 6 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (6) , 5227-5240
A Low-Complexity Detector for OTFS-Based Sensing
Orthogonal time frequency space (OTFS) modulation is gaining recognition for its potential to facilitate integrated sensing and communication (ISAC) within future mobile networks. However, computing the sensing channel matrix in OTFS, a crucial step for accurate target parameter estimation, presents significant challenges due to its high dimensionality. Therefore, this study introduces an innovative method to reduce such computational complexity by combining two ingredients. First, through algebraic operations, we decompose the sensing channel matrix into four lower-dimensional matrices whose elements can be associated with a Dirichlet kernel. Second, we formulate an analytical criterion, independent of system parameters, that leverages the properties of the Dirichlet kernel and identifies the most informative elements of these matrices that deserve computation. To demonstrate the effectiveness of our approach, we assess the computational complexity of this distilled channel matrix in terms of the number of elementary operations required. Numerical results indicate that our technique markedly decreases receiver complexity by up to three orders of magnitude without compromising sensing performance.
- 6 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Wireless Communications
- Vol. 24 (6) , 5227-5240
A Low-Complexity Detector for OTFS-Based Sensing
Orthogonal time frequency space (OTFS) modulation is gaining recognition for its potential to facilitate integrated sensing and communication (ISAC) within future mobile networks. However, computing the sensing channel matrix in OTFS, a crucial step for accurate target parameter estimation, presents significant challenges due to its high dimensionality. Therefore, this study introduces an innovative method to reduce such computational complexity by combining two ingredients. First, through algebraic operations, we decompose the sensing channel matrix into four lower-dimensional matrices whose elements can be associated with a Dirichlet kernel. Second, we formulate an analytical criterion, independent of system parameters, that leverages the properties of the Dirichlet kernel and identifies the most informative elements of these matrices that deserve computation. To demonstrate the effectiveness of our approach, we assess the computational complexity of this distilled channel matrix in terms of the number of elementary operations required. Numerical results indicate that our technique markedly decreases receiver complexity by up to three orders of magnitude without compromising sensing performance.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 14 (5) , 1531-1535
Cooperative Maximum Likelihood Target Position Estimation for MIMO-ISAC Networks
This letter investigates target position estimation in integrated sensing and communication networks composed of multiple cooperating monostatic base stations (BSs). Each BS employs a MIMO-orthogonal time-frequency space (OTFS) scheme, enabling the coexistence of communication and sensing. A general cooperative maximum likelihood (ML) framework is derived, directly estimating the target position in a common reference system rather than relying on local range and angle estimates at each BS. Positioning accuracy is evaluated in single-target scenarios by varying the number of collaborating BSs, using root mean square error (RMSE), and comparing against the square root of the Cramér-Rao lower bound. Numerical results demonstrate that the ML framework significantly reduces the position RMSE as the number of cooperating BSs increases.
- 5 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications Letters
- Vol. 14 (5) , 1531-1535
Cooperative Maximum Likelihood Target Position Estimation for MIMO-ISAC Networks
This letter investigates target position estimation in integrated sensing and communication networks composed of multiple cooperating monostatic base stations (BSs). Each BS employs a MIMO-orthogonal time-frequency space (OTFS) scheme, enabling the coexistence of communication and sensing. A general cooperative maximum likelihood (ML) framework is derived, directly estimating the target position in a common reference system rather than relying on local range and angle estimates at each BS. Positioning accuracy is evaluated in single-target scenarios by varying the number of collaborating BSs, using root mean square error (RMSE), and comparing against the square root of the Cramér-Rao lower bound. Numerical results demonstrate that the ML framework significantly reduces the position RMSE as the number of cooperating BSs increases.
- Open Access
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Multistatic Parameter Estimation in the Near/Far Field for Integrated Sensing and Communication
This work proposes a maximum likelihood (ML)-based parameter estimation framework for a millimeter wave (mmWave) integrated sensing and communication (ISAC) system in a multistatic configuration using energy-efficient hybrid digital-analog (HDA) arrays. Due to the typically large arrays deployed in the higher frequency bands to mitigate isotropic path loss, such arrays may operate in the near-field (NF) regime. The proposed parameter estimation in this work consists of a two-stage estimation process, where the first stage is based on far-field (FF) assumptions, and is used to obtain a first estimate of the target parameters. In cases where the target is determined to be in the NF of the arrays, a second estimation based on NF assumptions is carried out to obtain more accurate estimates. In particular, when operating in the near-filed of the transmitter (Tx), we select beamfocusing array weights designed to achieve a constant gain over an extended spatial region and re-estimate the target parameters at the receivers (Rxs). We evaluate the effectiveness of the proposed framework in numerous scenarios through numerical simulations and demonstrate the impact of the custom-designed flat-gain beamfocusing codewords in increasing the communication performance of the system.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessMultistatic Parameter Estimation in the Near/Far Field for Integrated Sensing and Communication
This work proposes a maximum likelihood (ML)-based parameter estimation framework for a millimeter wave (mmWave) integrated sensing and communication (ISAC) system in a multistatic configuration using energy-efficient hybrid digital-analog (HDA) arrays. Due to the typically large arrays deployed in the higher frequency bands to mitigate isotropic path loss, such arrays may operate in the near-field (NF) regime. The proposed parameter estimation in this work consists of a two-stage estimation process, where the first stage is based on far-field (FF) assumptions, and is used to obtain a first estimate of the target parameters. In cases where the target is determined to be in the NF of the arrays, a second estimation based on NF assumptions is carried out to obtain more accurate estimates. In particular, when operating in the near-filed of the transmitter (Tx), we select beamfocusing array weights designed to achieve a constant gain over an extended spatial region and re-estimate the target parameters at the receivers (Rxs). We evaluate the effectiveness of the proposed framework in numerous scenarios through numerical simulations and demonstrate the impact of the custom-designed flat-gain beamfocusing codewords in increasing the communication performance of the system.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 9284-9298
Sensor Fusion and Resource Management in MIMO-OFDM Joint Sensing and Communication
This study explores the promising potential of integrating sensing capabilities into multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM)-based networks through innovative multi-sensor fusion techniques, tracking algorithms, and resource management. A novel data fusion technique is proposed within the MIMO-OFDM system, which promotes cooperative sensing among monostatic (JSC) base stations by sharing range-angle maps with a central fusion center. To manage data sharing and control network overhead introduced by cooperation, an excision filter is introduced at each base station. After data fusion, the framework employs a three-step clustering procedure combined with a tracking algorithm to effectively handle point-like and extended targets. Delving into the sensing/communication trade-off, resources such as transmit power, frequency, and time are varied, providing valuable insights into their impact on the overall system performance. Additionally, a sophisticated channel model is proposed, accounting for complex urban propagation scenarios and addressing multipath effects and multiple reflection points for extended targets like vehicles. Evaluation metrics, including (OSPA), downlink sum rate, and bit rate, offer a comprehensive assessment of the system's localization and communication capabilities, as well as network overhead.
- 6 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 74 (6) , 9284-9298
Sensor Fusion and Resource Management in MIMO-OFDM Joint Sensing and Communication
This study explores the promising potential of integrating sensing capabilities into multiple-input multiple-output (MIMO)-orthogonal frequency division multiplexing (OFDM)-based networks through innovative multi-sensor fusion techniques, tracking algorithms, and resource management. A novel data fusion technique is proposed within the MIMO-OFDM system, which promotes cooperative sensing among monostatic (JSC) base stations by sharing range-angle maps with a central fusion center. To manage data sharing and control network overhead introduced by cooperation, an excision filter is introduced at each base station. After data fusion, the framework employs a three-step clustering procedure combined with a tracking algorithm to effectively handle point-like and extended targets. Delving into the sensing/communication trade-off, resources such as transmit power, frequency, and time are varied, providing valuable insights into their impact on the overall system performance. Additionally, a sophisticated channel model is proposed, accounting for complex urban propagation scenarios and addressing multipath effects and multiple reflection points for extended targets like vehicles. Evaluation metrics, including (OSPA), downlink sum rate, and bit rate, offer a comprehensive assessment of the system's localization and communication capabilities, as well as network overhead.
- Open Access
Toward Intelligent Roads: Uniting Sensing and Communication in Mobile Networks
As 6G development progresses, joint sensing and communication (JSC) is emerging as a transformative technology, promising enhanced spectrum and energy efficiency alongside innovative services. This paper delves into underexplored facets of JSC, particularly its role in vehicular technology and transportation systems. It discusses data fusion techniques that enable cooperative sensing in networked environments and underscores the critical role of resource management in balancing sensing and communication. It suggests modeling extended targets, such as vehicles, within a computationally feasible framework. Moreover, it proposes a novel integration of AI-based target recognition, allowing target-specific tracking parameters and target-based sensing resource allocation. Importantly, a case study is presented to underscore the real-world applicability of these concepts in vehicular scenarios, demonstrating how networked devices can achieve high sensing and communication performance.
Open AccessToward Intelligent Roads: Uniting Sensing and Communication in Mobile Networks
As 6G development progresses, joint sensing and communication (JSC) is emerging as a transformative technology, promising enhanced spectrum and energy efficiency alongside innovative services. This paper delves into underexplored facets of JSC, particularly its role in vehicular technology and transportation systems. It discusses data fusion techniques that enable cooperative sensing in networked environments and underscores the critical role of resource management in balancing sensing and communication. It suggests modeling extended targets, such as vehicles, within a computationally feasible framework. Moreover, it proposes a novel integration of AI-based target recognition, allowing target-specific tracking parameters and target-based sensing resource allocation. Importantly, a case study is presented to underscore the real-world applicability of these concepts in vehicular scenarios, demonstrating how networked devices can achieve high sensing and communication performance.