Carolin Höfer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carolin Höfer has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
- Haochen Wang
MIT Kavli Institute for Astrophysics and Space Research
7 shared publications - Kiyoshi Wesley Masui
MIT Kavli Institute for Astrophysics and Space Research
7 shared publications - Simon Foreman
Arizona State University
7 shared publications - Alex Reda
Yale University
6 shared publications - Alex Schwaner Hill
University of British Columbia
6 shared publications - Dallas Wulf
McGill University
6 shared publications
Latest Publications
- Open Access
- 28 September 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1009 (2) , 159
Detection of the Cosmological 21 cm Signal in Autocorrelation at z ∼ 1 with the Canadian Hydrogen Intensity Mapping Experiment
We present the first detection of the cosmological 21 cm intensity mapping signal in autocorrelation at z ∼ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto power spectrum over a frequency range of 608.2–707.8 MHz ( z = 1.34–1.01) at 0.4 h Mpc −1 ≲ k ≲ 1.5 h Mpc −1 , with a detection significance of 12.4 σ . Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ∼ 1.08 and z ∼ 1.24 with detection significance of 8.6 σ and 9.1 σ , respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto power spectrum detection demonstrates CHIME’s capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.
- 28 September 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 1009 (2) , 159
Open AccessDetection of the Cosmological 21 cm Signal in Autocorrelation at z ∼ 1 with the Canadian Hydrogen Intensity Mapping Experiment
We present the first detection of the cosmological 21 cm intensity mapping signal in autocorrelation at z ∼ 1 with the Canadian Hydrogen Intensity Mapping Experiment (CHIME). Using 94 nights of observation, we have measured the 21 cm auto power spectrum over a frequency range of 608.2–707.8 MHz ( z = 1.34–1.01) at 0.4 h Mpc −1 ≲ k ≲ 1.5 h Mpc −1 , with a detection significance of 12.4 σ . Our analysis employs significant improvements to the CHIME data processing pipeline compared to previous work, including novel radio frequency interference detection and masking algorithms, achromatic beamforming techniques, and foreground filtering before time averaging to minimize spectral leakage. We establish the robustness and reliability of our detection through a comprehensive suite of validation tests. We also measure the 21 cm signal in two independent sub-bands centered at z ∼ 1.08 and z ∼ 1.24 with detection significance of 8.6 σ and 9.1 σ , respectively. We briefly discuss the theoretical interpretation of these measurements in terms of a power spectrum model, deferring the details to a companion paper. This auto power spectrum detection demonstrates CHIME’s capability to probe large-scale structure through 21 cm intensity mapping without reliance on external galaxy surveys.
- 26 February 2026
- Published by American Physical Society (APS) in Physical Review D
- Vol. 113 (4)
Mitigating antenna gain errors with hybrid foreground residual subtraction in CHIME simulations
- 26 February 2026
- Published by American Physical Society (APS) in Physical Review D
- Vol. 113 (4)
Mitigating antenna gain errors with hybrid foreground residual subtraction in CHIME simulations
- Open Access
- 18 February 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 998 (2) , 310
Discovery of a 21 cm Absorption System at z = 2.327 with CHIME
We report the detection of a new 21 cm absorption system associated with the radio source NVSS J164725 + 375218 at a redshift of z = 2.327, identified through a pilot survey conducted by the Canadian Hydrogen Intensity Mapping Experiment (CHIME). This is the fifth detection of an associated system at z > 2. By analyzing a subset of available data, we conduct a spectrally blind survey for 21 cm absorption systems within the redshift range of 0.78–2.55 along 202 lines of sight toward known sources in the declination range of 35° to 60°. We detect three 21 cm absorbers: two previously known intervening systems and one newly discovered associated system. By fitting the absorption profiles with models containing one to three Gaussian components and selecting the best model using the Bayesian information criterion, we estimate the optical depth, velocity-integrated optical depth, and the ratio between the H i column density and the spin temperature of the absorption systems. These results demonstrate CHIME’s ability to discover new absorbers, even in a small subset of its full dataset.
- 18 February 2026
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 998 (2) , 310
Open AccessDiscovery of a 21 cm Absorption System at z = 2.327 with CHIME
We report the detection of a new 21 cm absorption system associated with the radio source NVSS J164725 + 375218 at a redshift of z = 2.327, identified through a pilot survey conducted by the Canadian Hydrogen Intensity Mapping Experiment (CHIME). This is the fifth detection of an associated system at z > 2. By analyzing a subset of available data, we conduct a spectrally blind survey for 21 cm absorption systems within the redshift range of 0.78–2.55 along 202 lines of sight toward known sources in the declination range of 35° to 60°. We detect three 21 cm absorbers: two previously known intervening systems and one newly discovered associated system. By fitting the absorption profiles with models containing one to three Gaussian components and selecting the best model using the Bayesian information criterion, we estimate the optical depth, velocity-integrated optical depth, and the ratio between the H i column density and the spin temperature of the absorption systems. These results demonstrate CHIME’s ability to discover new absorbers, even in a small subset of its full dataset.
- Open Access
- 5 December 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 704, A117
The impact of diffuse Galactic emission on direction-independent gain calibration in high-redshift 21 cm observations
This study examines the impact of diffuse Galactic emission on sky-based direction-independent (DI) gain calibration using realistic forward simulations of Low-Frequency Array (LOFAR) observations of the high-redshift 21 cm signal of neutral hydrogen during the epoch of reionization (EoR). We simulated LOFAR observations between 147 MHz to 159 MHz using a sky model that includes a point source catalog and diffuse Galactic emission. The simulated observations were DI gain-calibrated with the point source catalog alone, utilizing the LOFAR-EoR data analysis pipeline. A full power spectrum analysis was conducted to measure the systematic bias (relative to thermal noise) caused by DI gain calibration using a point-source-only (PSO) sky model, when applied to simulated data that include both point sources and diffuse Galactic emission. These results were compared to a ground truth scenario, where both the simulated sky and the calibration model solely included point sources. Additionally, the cross-coherence between observation pairs was computed to determine whether the DI gain calibration errors are coherent or incoherent in specific regions of power spectrum space as a function of integration time. We find that DI gain calibration with a PSO sky model that omits diffuse Galactic emission introduces a systematic bias in the power spectrum for k ∥ bins of < 0.2 h Mpc −1 . The power spectrum errors in these bins are coherent in time and frequency; therefore, the resulting bias could be mitigated during the foreground removal step using Gaussian process regression (GPR), as demonstrated in previous studies. In contrast, errors for k ‖ > 0.2 h Mpc −1 are largely incoherent and average down as noise. We conclude that based on our analysis prior to foreground removal, missing diffuse Galactic emission in the sky model during DI gain calibration is unlikely to be a dominant contributor to the excess noise observed in the current LOFAR-EoR upper limits on the 21 cm signal power spectrum.
- 5 December 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 704, A117
Open AccessThe impact of diffuse Galactic emission on direction-independent gain calibration in high-redshift 21 cm observations
This study examines the impact of diffuse Galactic emission on sky-based direction-independent (DI) gain calibration using realistic forward simulations of Low-Frequency Array (LOFAR) observations of the high-redshift 21 cm signal of neutral hydrogen during the epoch of reionization (EoR). We simulated LOFAR observations between 147 MHz to 159 MHz using a sky model that includes a point source catalog and diffuse Galactic emission. The simulated observations were DI gain-calibrated with the point source catalog alone, utilizing the LOFAR-EoR data analysis pipeline. A full power spectrum analysis was conducted to measure the systematic bias (relative to thermal noise) caused by DI gain calibration using a point-source-only (PSO) sky model, when applied to simulated data that include both point sources and diffuse Galactic emission. These results were compared to a ground truth scenario, where both the simulated sky and the calibration model solely included point sources. Additionally, the cross-coherence between observation pairs was computed to determine whether the DI gain calibration errors are coherent or incoherent in specific regions of power spectrum space as a function of integration time. We find that DI gain calibration with a PSO sky model that omits diffuse Galactic emission introduces a systematic bias in the power spectrum for k ∥ bins of < 0.2 h Mpc −1 . The power spectrum errors in these bins are coherent in time and frequency; therefore, the resulting bias could be mitigated during the foreground removal step using Gaussian process regression (GPR), as demonstrated in previous studies. In contrast, errors for k ‖ > 0.2 h Mpc −1 are largely incoherent and average down as noise. We conclude that based on our analysis prior to foreground removal, missing diffuse Galactic emission in the sky model during DI gain calibration is unlikely to be a dominant contributor to the excess noise observed in the current LOFAR-EoR upper limits on the 21 cm signal power spectrum.
- Open Access
- 2 July 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 699, A109
Constraints on the state of the intergalactic medium at z∼8 − 10 using redshifted 21 cm observations with LOFAR
The power spectra of the redshifted 21 cm signal from the Epoch of Reionization (EoR) contain information about the ionization and thermal states of the intergalactic medium (IGM) and depend on the properties of the sources that existed during that period. Recently, the LOFAR-EoR Key Science Project team has analysed ten nights of LOFAR high-band data and estimated upper limits on the 21 cm power spectrum at redshifts 8.3, 9.1, and 10.1. Here, we used these upper limit results to constrain the properties of the IGM at those redshifts. We focus on the properties of the ionized and heated regions where the temperature is larger than that of the cosmic microwave background (CMB). We modelled the power spectrum of the 21 cm signal with the code GRIZZLY and used a Bayesian inference framework to explore the source parameters for uniform priors on their ranges. The framework also provides information about the IGM properties in the form of derived parameters. We do not include constraints from other observables except for some very conservative limits on the maximum ionization fraction at those redshifts, which we estimated from the CMB Thomson scattering optical depth. In a model that includes a radio background in excess of the CMB, the 95% (68%) credible intervals of disfavoured models at redshift 9.1 for the chosen priors correspond to IGM states with an averaged ionization and heated fraction below 0.46 (≲ 0.05), an average gas temperature below 44 K (4 K), and a characteristic size of the heated region of ≲14 h−1 Mpc (≲3 h−1 Mpc). The 68% credible interval suggests an excess radio background that is more than 100% of the CMB at 1.42 GHz, while the 95% credible interval of the radio background efficiency parameter spans the entire prior range. The behaviour of the credible intervals is similar at all redshifts. The models disfavoured by the LOFAR upper limits are extreme, as they are mainly driven by rare and large ionized or heated regions. We find that the inclusion of upper limits from other radio interferometric observations in the Bayesian analysis significantly increases the number of disfavoured EoR models, thus enhancing the disfavoured credible intervals of the IGM parameters, especially those related to the average gas temperature and size distribution of the heated regions. While our constraints are not yet very strong, more stringent upcoming results from 21 cm observations together with the detection of many high-z galaxies, for example with the James Webb Space Telescope, will strengthen understanding of this crucial phase of the Universe.
- 2 July 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 699, A109
Open AccessConstraints on the state of the intergalactic medium at z∼8 − 10 using redshifted 21 cm observations with LOFAR
The power spectra of the redshifted 21 cm signal from the Epoch of Reionization (EoR) contain information about the ionization and thermal states of the intergalactic medium (IGM) and depend on the properties of the sources that existed during that period. Recently, the LOFAR-EoR Key Science Project team has analysed ten nights of LOFAR high-band data and estimated upper limits on the 21 cm power spectrum at redshifts 8.3, 9.1, and 10.1. Here, we used these upper limit results to constrain the properties of the IGM at those redshifts. We focus on the properties of the ionized and heated regions where the temperature is larger than that of the cosmic microwave background (CMB). We modelled the power spectrum of the 21 cm signal with the code GRIZZLY and used a Bayesian inference framework to explore the source parameters for uniform priors on their ranges. The framework also provides information about the IGM properties in the form of derived parameters. We do not include constraints from other observables except for some very conservative limits on the maximum ionization fraction at those redshifts, which we estimated from the CMB Thomson scattering optical depth. In a model that includes a radio background in excess of the CMB, the 95% (68%) credible intervals of disfavoured models at redshift 9.1 for the chosen priors correspond to IGM states with an averaged ionization and heated fraction below 0.46 (≲ 0.05), an average gas temperature below 44 K (4 K), and a characteristic size of the heated region of ≲14 h−1 Mpc (≲3 h−1 Mpc). The 68% credible interval suggests an excess radio background that is more than 100% of the CMB at 1.42 GHz, while the 95% credible interval of the radio background efficiency parameter spans the entire prior range. The behaviour of the credible intervals is similar at all redshifts. The models disfavoured by the LOFAR upper limits are extreme, as they are mainly driven by rare and large ionized or heated regions. We find that the inclusion of upper limits from other radio interferometric observations in the Bayesian analysis significantly increases the number of disfavoured EoR models, thus enhancing the disfavoured credible intervals of the IGM parameters, especially those related to the average gas temperature and size distribution of the heated regions. While our constraints are not yet very strong, more stringent upcoming results from 21 cm observations together with the detection of many high-z galaxies, for example with the James Webb Space Telescope, will strengthen understanding of this crucial phase of the Universe.
- Open Access
- 13 June 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 698, A186
Deeper multi-redshift upper limits on the epoch of reionisation 21 cm signal power spectrum from LOFAR between z = 8.3 and z = 10.1
We present new upper limits on the 21 cm signal power spectrum from the epoch of reionisation (EoR), at redshifts z≈10.1,9.1, and 8.3, based on reprocessed observations from the Low-Frequency Array (LOFAR). The analysis incorporates significant enhancements in calibration methods, sky model subtraction, radio-frequency interference (RFI) mitigation, and an improved signal separation technique using machine learning to develop a physically motivated covariance model for the 21 cm signal. These advancements have markedly reduced previously observed excess power due to residual systematics, bringing the measurements closer to the theoretical thermal noise limit across the entire k-space. Using comparable observational data, we achieve a two- to fourfold improvement over our previous LOFAR limits, with best upper limits of Δ212 < (68.7 mK)2 at k=0.076 h cMpc−1, Δ212 < (54.3 mK)2 at k=0.076 h cMpc−1, and Δ212 < (65.5 mK)2 at k=0.083 h cMpc−1 at redshifts z≈10.1,9.1, and 8.3, respectively. These new multi-redshift upper limits provide new constraints that can be used to refine our understanding of the astrophysical processes during the EoR. Comprehensive validation tests, including signal injection, were performed to ensure the robustness of our methods. The remaining excess power is attributed to residual foreground emissions from distant sources, beam model inaccuracies, and low-level RFI. We discuss ongoing and future improvements to the data processing pipeline aimed at further reducing these residuals, thereby enhancing the sensitivity of LOFAR observations in the quest to detect the 21 cm signal from the EoR.
- 13 June 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 698, A186
Open AccessDeeper multi-redshift upper limits on the epoch of reionisation 21 cm signal power spectrum from LOFAR between z = 8.3 and z = 10.1
We present new upper limits on the 21 cm signal power spectrum from the epoch of reionisation (EoR), at redshifts z≈10.1,9.1, and 8.3, based on reprocessed observations from the Low-Frequency Array (LOFAR). The analysis incorporates significant enhancements in calibration methods, sky model subtraction, radio-frequency interference (RFI) mitigation, and an improved signal separation technique using machine learning to develop a physically motivated covariance model for the 21 cm signal. These advancements have markedly reduced previously observed excess power due to residual systematics, bringing the measurements closer to the theoretical thermal noise limit across the entire k-space. Using comparable observational data, we achieve a two- to fourfold improvement over our previous LOFAR limits, with best upper limits of Δ212 < (68.7 mK)2 at k=0.076 h cMpc−1, Δ212 < (54.3 mK)2 at k=0.076 h cMpc−1, and Δ212 < (65.5 mK)2 at k=0.083 h cMpc−1 at redshifts z≈10.1,9.1, and 8.3, respectively. These new multi-redshift upper limits provide new constraints that can be used to refine our understanding of the astrophysical processes during the EoR. Comprehensive validation tests, including signal injection, were performed to ensure the robustness of our methods. The remaining excess power is attributed to residual foreground emissions from distant sources, beam model inaccuracies, and low-level RFI. We discuss ongoing and future improvements to the data processing pipeline aimed at further reducing these residuals, thereby enhancing the sensitivity of LOFAR observations in the quest to detect the 21 cm signal from the EoR.
- Open Access
- 4 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 696, A56
Spectral modelling of Cygnus A between 110 and 250 MHz
Studying the redshifted 21-cm signal from the neutral hydrogen during the Epoch of Reionisation and Cosmic Dawn is fundamental for understanding the physics of the early universe. One of the challenges that 21-cm experiments face is the contamination by bright foreground sources, such as Cygnus A, for which accurate spatial and spectral models are needed to minimise the residual contamination after their removal. In this work, we develop a new, high-resolution model of Cygnus A using Low Frequency Array (LOFAR) observations in the 110–250 MHz range, improving upon previous models by incorporating physical spectral information through the forced-spectrum method during multi-frequency deconvolution. This approach addresses the limitations of earlier models by providing a more accurate representation of the complex structure and spectral behaviour of Cygnus A, including the spectral turnover in its brightest hotspots. The impact of this new model on the LOFAR 21-cm signal power spectrum is assessed by comparing it with both simulated and observed North Celestial Pole datasets. Significant improvements are observed in the cylindrical power spectrum along the Cygnus A direction, highlighting the importance of having spectrally accurate models of the brightest foreground sources. However, this improvement is washed out in the spherical power spectrum, where we measure differences of a few hundred mK at k < 0.63 h cMpc−1, but not statistically significant. The results suggest that other systematic effects must be mitigated before a substantial impact on 21-cm power spectrum can be achieved.
- 4 April 2025
- Published by EDP Sciences in Astronomy & Astrophysics
- Vol. 696, A56
Open AccessSpectral modelling of Cygnus A between 110 and 250 MHz
Studying the redshifted 21-cm signal from the neutral hydrogen during the Epoch of Reionisation and Cosmic Dawn is fundamental for understanding the physics of the early universe. One of the challenges that 21-cm experiments face is the contamination by bright foreground sources, such as Cygnus A, for which accurate spatial and spectral models are needed to minimise the residual contamination after their removal. In this work, we develop a new, high-resolution model of Cygnus A using Low Frequency Array (LOFAR) observations in the 110–250 MHz range, improving upon previous models by incorporating physical spectral information through the forced-spectrum method during multi-frequency deconvolution. This approach addresses the limitations of earlier models by providing a more accurate representation of the complex structure and spectral behaviour of Cygnus A, including the spectral turnover in its brightest hotspots. The impact of this new model on the LOFAR 21-cm signal power spectrum is assessed by comparing it with both simulated and observed North Celestial Pole datasets. Significant improvements are observed in the cylindrical power spectrum along the Cygnus A direction, highlighting the importance of having spectrally accurate models of the brightest foreground sources. However, this improvement is washed out in the spherical power spectrum, where we measure differences of a few hundred mK at k < 0.63 h cMpc−1, but not statistically significant. The results suggest that other systematic effects must be mitigated before a substantial impact on 21-cm power spectrum can be achieved.
- Open Access
- 23 February 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 963 (1) , 23
A Detection of Cosmological 21 cm Emission from CHIME in Cross-correlation with eBOSS Measurements of the Lyα Forest
We report the detection of 21 cm emission at an average redshift z ¯ = 2.3 in the cross-correlation of data from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with measurements of the Lyα forest from eBOSS. Data collected by CHIME over 88 days in the 400–500 MHz frequency band (1.8 < z < 2.5) are formed into maps of the sky and high-pass delay filtered to suppress the foreground power, corresponding to removing cosmological scales with k ∥ ≲ 0.13 Mpc−1 at the average redshift. Line-of-sight spectra to the eBOSS background quasar locations are extracted from the CHIME maps and combined with the Lyα forest flux transmission spectra to estimate the 21 cm–Lyα cross-correlation function. Fitting a simulation-derived template function to this measurement results in a 9σ detection significance. The coherent accumulation of the signal through cross-correlation is sufficient to enable a detection despite excess variance from foreground residuals ∼6–10 times brighter than the expected thermal noise level in the correlation function. These results are the highest-redshift measurement of 21 cm emission to date, and they set the stage for future 21 cm intensity mapping analyses at z > 1.8.
- 23 February 2024
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 963 (1) , 23
Open AccessA Detection of Cosmological 21 cm Emission from CHIME in Cross-correlation with eBOSS Measurements of the Lyα Forest
We report the detection of 21 cm emission at an average redshift z ¯ = 2.3 in the cross-correlation of data from the Canadian Hydrogen Intensity Mapping Experiment (CHIME) with measurements of the Lyα forest from eBOSS. Data collected by CHIME over 88 days in the 400–500 MHz frequency band (1.8 < z < 2.5) are formed into maps of the sky and high-pass delay filtered to suppress the foreground power, corresponding to removing cosmological scales with k ∥ ≲ 0.13 Mpc−1 at the average redshift. Line-of-sight spectra to the eBOSS background quasar locations are extracted from the CHIME maps and combined with the Lyα forest flux transmission spectra to estimate the 21 cm–Lyα cross-correlation function. Fitting a simulation-derived template function to this measurement results in a 9σ detection significance. The coherent accumulation of the signal through cross-correlation is sufficient to enable a detection despite excess variance from foreground residuals ∼6–10 times brighter than the expected thermal noise level in the correlation function. These results are the highest-redshift measurement of 21 cm emission to date, and they set the stage for future 21 cm intensity mapping analyses at z > 1.8.
- Top Cited PapersOpen Access
- 1 April 2023
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 947 (1) , 16
Detection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment
We present a detection of 21 cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment. Radio observations acquired over 102 nights are used to construct maps that are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRGs), emission-line galaxies (ELGs), and quasars (QSOs) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood ratio test, yields a detection significance of 7.1σ (LRG), 5.7σ (ELG), and 11.1σ (QSO). These are the first 21 cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (H i), defined as H I ≡ 10 3 Ω H I b H I + 〈 f μ 2 〉 , where ΩH i is the cosmic abundance of H i, b H i is the linear bias of H i, and 〈f μ 2〉 = 0.552 encodes the effect of redshift-space distortions at linear order. We find H I = 1.51 − 0.97 + 3.60 for LRGs (z = 0.84), H I = 6.76 − 3.79 + 9.04 for ELGs (z = 0.96), and H I = 1.68 − 0.67 + 1.10 for QSOs (z = 1.20), with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and we find a nonzero bias Δ v = − 66 ± 20 km s−1 for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at z = 1.30 producing the highest-redshift 21 cm intensity mapping measurement thus far.
- 1 April 2023
- Published by American Astronomical Society in The Astrophysical Journal
- Vol. 947 (1) , 16
Top Cited PapersOpen AccessDetection of Cosmological 21 cm Emission with the Canadian Hydrogen Intensity Mapping Experiment
We present a detection of 21 cm emission from large-scale structure (LSS) between redshift 0.78 and 1.43 made with the Canadian Hydrogen Intensity Mapping Experiment. Radio observations acquired over 102 nights are used to construct maps that are foreground filtered and stacked on the angular and spectral locations of luminous red galaxies (LRGs), emission-line galaxies (ELGs), and quasars (QSOs) from the eBOSS clustering catalogs. We find decisive evidence for a detection when stacking on all three tracers of LSS, with the logarithm of the Bayes factor equal to 18.9 (LRG), 10.8 (ELG), and 56.3 (QSO). An alternative frequentist interpretation, based on the likelihood ratio test, yields a detection significance of 7.1σ (LRG), 5.7σ (ELG), and 11.1σ (QSO). These are the first 21 cm intensity mapping measurements made with an interferometer. We constrain the effective clustering amplitude of neutral hydrogen (H i), defined as H I ≡ 10 3 Ω H I b H I + 〈 f μ 2 〉 , where ΩH i is the cosmic abundance of H i, b H i is the linear bias of H i, and 〈f μ 2〉 = 0.552 encodes the effect of redshift-space distortions at linear order. We find H I = 1.51 − 0.97 + 3.60 for LRGs (z = 0.84), H I = 6.76 − 3.79 + 9.04 for ELGs (z = 0.96), and H I = 1.68 − 0.67 + 1.10 for QSOs (z = 1.20), with constraints limited by modeling uncertainties at nonlinear scales. We are also sensitive to bias in the spectroscopic redshifts of each tracer, and we find a nonzero bias Δ v = − 66 ± 20 km s−1 for the QSOs. We split the QSO catalog into three redshift bins and have a decisive detection in each, with the upper bin at z = 1.30 producing the highest-redshift 21 cm intensity mapping measurement thus far.
- Top Cited PapersOpen Access
- 27 July 2022
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 261 (2) , 29
An Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment
The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400–800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC, Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8–2.5 to constrain the expansion history of the universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north–south, each 100 m × 20 m and outfitted with a 256-element dual-polarization linear feed array. CHIME observes a two-degree-wide stripe covering the entire meridian at any given moment, observing three-quarters of the sky every day owing to Earth’s rotation. An FX correlator utilizes field-programmable gate arrays and graphics processing units to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, very long baseline interferometry, and 21 cm absorber back ends. For the cosmology back end, the N feed 2 correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first 3 yr of science data, and we describe the current progress in characterizing CHIME’s primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis, as well as for investigation of Galactic foregrounds.
- 27 July 2022
- Published by American Astronomical Society in The Astrophysical Journal Supplement Series
- Vol. 261 (2) , 29
Top Cited PapersOpen AccessAn Overview of CHIME, the Canadian Hydrogen Intensity Mapping Experiment
The Canadian Hydrogen Intensity Mapping Experiment (CHIME) is a drift scan radio telescope operating across the 400–800 MHz band. CHIME is located at the Dominion Radio Astrophysical Observatory near Penticton, BC, Canada. The instrument is designed to map neutral hydrogen over the redshift range 0.8–2.5 to constrain the expansion history of the universe. This goal drives the design features of the instrument. CHIME consists of four parallel cylindrical reflectors, oriented north–south, each 100 m × 20 m and outfitted with a 256-element dual-polarization linear feed array. CHIME observes a two-degree-wide stripe covering the entire meridian at any given moment, observing three-quarters of the sky every day owing to Earth’s rotation. An FX correlator utilizes field-programmable gate arrays and graphics processing units to digitize and correlate the signals, with different correlation products generated for cosmological, fast radio burst, pulsar, very long baseline interferometry, and 21 cm absorber back ends. For the cosmology back end, the N feed 2 correlation matrix is formed for 1024 frequency channels across the band every 31 ms. A data receiver system applies calibration and flagging and, for our primary cosmological data product, stacks redundant baselines and integrates for 10 s. We present an overview of the instrument, its performance metrics based on the first 3 yr of science data, and we describe the current progress in characterizing CHIME’s primary beam response. We also present maps of the sky derived from CHIME data; we are using versions of these maps for a cosmological stacking analysis, as well as for investigation of Galactic foregrounds.