Mikael Järn
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mikael Järn has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Wågberg
Umeå University
3 shared publications - Agne Swerin
Pro2BE academic environment in Processes and products for a circular biobased economy at the Department of Engineering and Chemical Sciences, Karlstad University, Sweden
2 shared publications - Erik Zäll
Nano for Energy Unit, Department of Physics, Umeå University, Umeå, Sweden
2 shared publications - Joachim Schoelkopf
Omya International AG, Baslerstrasse, 4665 Oftringen, Switzerland
2 shared publications Mikael Sundin
RISE, Research Institutes of Sweden, Stockholm, Sweden
2 shared publications- Natalia A. Wojas
RISE Research Institutes of Sweden, Division of Bioeconomy and Health–Material and Surface Design, Box 5607, SE-114 86 Stockholm, Sweden
2 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (11) , 3866-3875
Informed development of bio-based PFAS alternatives for textile water repellent finishes: applying SSbD scoping to address lifecycle safety and sustainability in early innovation
Our bio-based PFAS-free DWR case study demonstrates how SSbD scoping can be conducted at low TRLs and how feedback from SSbD scoping can support innovation and early-stage redesign.
- 4 November 2026
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (11) , 3866-3875
Open AccessInformed development of bio-based PFAS alternatives for textile water repellent finishes: applying SSbD scoping to address lifecycle safety and sustainability in early innovation
Our bio-based PFAS-free DWR case study demonstrates how SSbD scoping can be conducted at low TRLs and how feedback from SSbD scoping can support innovation and early-stage redesign.
- Open Access
- 8 October 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-18
Making surface-functionalized nanoscale candidate reference and test materials for interlaboratory comparisons involving multi-method studies
The reliable characterization of engineered nanomaterials (NMs) and nano-enabled advanced materials (NAMs) requires validated analytical methods for measuring key properties such as size, size distribution, morphology, chemical composition, and surface chemistry. Establishing such methods and verifying instrument performance and measurement competence requires (certified) reference materials (CRMs/RMs), representative test materials (RTMs), reference data (RD), and interlaboratory comparisons (ILCs). Although several nanoscale size standards exist, no RMs/RTMs with well-defined surface chemistry are available, despite the critical role of surface functional groups (FGs), ligands, and coatings in NM functionality and safety. Here, we report the development and characterization of two surface-modified nanoscale candidate RTMs, SiO2-50-NH2 and SiO2-80-NH2, comprising nonporous silica nanoparticles with total amino FG amounts of 205.7 ± 4.8 and 103.2 ± 3.0 nmol mg⁻1, respectively. Material selection, bottling, homogeneity, and stability were assessed using a previously established multi-method characterization strategy. Analytical techniques included dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), zeta potential measurements, electron microscopy (EM), an automated optical Fluram assay, and quantitative nuclear magnetic resonance spectroscopy (qNMR) for determining derivatizable and total amino FGs. The results highlight the importance of combining complementary analytical methods rather than relying on a single technique. Additionally, a set of aminated silica NMs with varying amino FG densities were used to calibrate X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), enabling amino FG quantification and method correlation. This characterization concept represents a first step towards establishing RMs/RTMs for NM surface chemistry measurements and ILCs assessing suitable analytical methods and their performance. Graphical Abstract
- 8 October 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-18
Open AccessMaking surface-functionalized nanoscale candidate reference and test materials for interlaboratory comparisons involving multi-method studies
The reliable characterization of engineered nanomaterials (NMs) and nano-enabled advanced materials (NAMs) requires validated analytical methods for measuring key properties such as size, size distribution, morphology, chemical composition, and surface chemistry. Establishing such methods and verifying instrument performance and measurement competence requires (certified) reference materials (CRMs/RMs), representative test materials (RTMs), reference data (RD), and interlaboratory comparisons (ILCs). Although several nanoscale size standards exist, no RMs/RTMs with well-defined surface chemistry are available, despite the critical role of surface functional groups (FGs), ligands, and coatings in NM functionality and safety. Here, we report the development and characterization of two surface-modified nanoscale candidate RTMs, SiO2-50-NH2 and SiO2-80-NH2, comprising nonporous silica nanoparticles with total amino FG amounts of 205.7 ± 4.8 and 103.2 ± 3.0 nmol mg⁻1, respectively. Material selection, bottling, homogeneity, and stability were assessed using a previously established multi-method characterization strategy. Analytical techniques included dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), zeta potential measurements, electron microscopy (EM), an automated optical Fluram assay, and quantitative nuclear magnetic resonance spectroscopy (qNMR) for determining derivatizable and total amino FGs. The results highlight the importance of combining complementary analytical methods rather than relying on a single technique. Additionally, a set of aminated silica NMs with varying amino FG densities were used to calibrate X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS), enabling amino FG quantification and method correlation. This characterization concept represents a first step towards establishing RMs/RTMs for NM surface chemistry measurements and ILCs assessing suitable analytical methods and their performance. Graphical Abstract
- Open Access
Round-Robin Study for Ice Adhesion Tests
Ice adhesion tests are widely used to assess the performance of potential icephobic surfaces and coatings. A great variety of test designs have been developed and used over the past decades due to the lack of formal standards for these types of tests. In many cases, the aim of the research was not only to determine ice adhesion values, but also to understand the key surface properties correlated to low ice adhesion surfaces. Data from different measurement techniques had low correspondence between the results: Values varied by orders of magnitude and showed different relative relationships to one another. This study sought to provide a broad comparison of ice adhesion testing approaches by conducting different ice adhesion tests with identical test surfaces. A total of 15 test facilities participated in this round-robin study, and the results of 13 partners are summarized in this paper. For the test series, ice types (impact and static) as well as test parameters were harmonized to minimize the deviations between the test setups. Our findings are presented in this paper, and the ice- and test-specific results are discussed. This study can improve our understanding of test results and support the standardization process for ice adhesion strength measurements.
Open AccessRound-Robin Study for Ice Adhesion Tests
Ice adhesion tests are widely used to assess the performance of potential icephobic surfaces and coatings. A great variety of test designs have been developed and used over the past decades due to the lack of formal standards for these types of tests. In many cases, the aim of the research was not only to determine ice adhesion values, but also to understand the key surface properties correlated to low ice adhesion surfaces. Data from different measurement techniques had low correspondence between the results: Values varied by orders of magnitude and showed different relative relationships to one another. This study sought to provide a broad comparison of ice adhesion testing approaches by conducting different ice adhesion tests with identical test surfaces. A total of 15 test facilities participated in this round-robin study, and the results of 13 partners are summarized in this paper. For the test series, ice types (impact and static) as well as test parameters were harmonized to minimize the deviations between the test setups. Our findings are presented in this paper, and the ice- and test-specific results are discussed. This study can improve our understanding of test results and support the standardization process for ice adhesion strength measurements.
- Open Access
- 22 August 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 261
Durability of antireflective SiO2 coatings with closed pore structure
- 22 August 2023
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 261
Open AccessDurability of antireflective SiO2 coatings with closed pore structure
- Open Access
- 9 May 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Calcite surfaces modified with carboxylic acids (C2 to C18): layer organization, wettability, and stability properties
A fundamental understanding of the interactions between mineral surfaces and amphiphilic surface modification agents is needed for better control over production and uses of mineral fillers. Here, we controlled the carboxylic acid layer formation conditions on calcite surfaces with high precision via vapour deposition. The properties of the resulting carboxylic acid layers were analyzed using surface sensitive techniques such as atomic force microscopy (AFM), contact angle measurements, angle resolved X-ray photoelectron spectroscopy (XPS) and vibrational sum-frequency spectroscopy. A low wettability was achieved with long hydrocarbon chain carboxylic acids, such as stearic acid. The stearic acid layer formed by vapour deposition is initially patchy, but with increasing vapour exposure time, the patches grow and condense into a homogeneous layer with a thickness close to that expected for a monolayer as evaluated by AFM and XPS. The build-up process of the layer occurs more rapidly at higher temperatures due to the higher vapour pressure. The stability of the deposited fatty acid layer in the presence of a water droplet increases with chain length and packing density in the adsorbed layer. Vibrational sum frequency spectroscopy data demonstrate that the stearic acid monolayers on calcite have their alkyl chains in an all-trans conformation and are anisotropically distributed on the plane of the surface, forming epitaxial monolayers. The vibrational spectra also show that the stearic acid molecules interact with the calcite surface through the carboxylic acid headgroup in both its protonated and deprotonated forms. The results presented provide new molecular insights into the properties of adsorbed carboxylic acid layers on calcite.
- 9 May 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCalcite surfaces modified with carboxylic acids (C2 to C18): layer organization, wettability, and stability properties
A fundamental understanding of the interactions between mineral surfaces and amphiphilic surface modification agents is needed for better control over production and uses of mineral fillers. Here, we controlled the carboxylic acid layer formation conditions on calcite surfaces with high precision via vapour deposition. The properties of the resulting carboxylic acid layers were analyzed using surface sensitive techniques such as atomic force microscopy (AFM), contact angle measurements, angle resolved X-ray photoelectron spectroscopy (XPS) and vibrational sum-frequency spectroscopy. A low wettability was achieved with long hydrocarbon chain carboxylic acids, such as stearic acid. The stearic acid layer formed by vapour deposition is initially patchy, but with increasing vapour exposure time, the patches grow and condense into a homogeneous layer with a thickness close to that expected for a monolayer as evaluated by AFM and XPS. The build-up process of the layer occurs more rapidly at higher temperatures due to the higher vapour pressure. The stability of the deposited fatty acid layer in the presence of a water droplet increases with chain length and packing density in the adsorbed layer. Vibrational sum frequency spectroscopy data demonstrate that the stearic acid monolayers on calcite have their alkyl chains in an all-trans conformation and are anisotropically distributed on the plane of the surface, forming epitaxial monolayers. The vibrational spectra also show that the stearic acid molecules interact with the calcite surface through the carboxylic acid headgroup in both its protonated and deprotonated forms. The results presented provide new molecular insights into the properties of adsorbed carboxylic acid layers on calcite.
- Open Access
- 7 November 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 250
Aerosol-based deposition of broadband antireflective silica coating with closed mesoporous structure
- 7 November 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 250
Open AccessAerosol-based deposition of broadband antireflective silica coating with closed mesoporous structure
- Open Access
- 20 June 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 245
Environmentally sustainable electroplating of selective cobalt-chromium coating on stainless steel for efficient solar collectors
- 20 June 2022
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 245
Open AccessEnvironmentally sustainable electroplating of selective cobalt-chromium coating on stainless steel for efficient solar collectors
- Open Access
- 1 April 2019
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 541, 42-55
Iceland spar calcite: Humidity and time effects on surface properties and their reversibility
- 1 April 2019
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 541, 42-55
Open AccessIceland spar calcite: Humidity and time effects on surface properties and their reversibility