SZSen Zhang

Sen Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sen Zhang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:

  • Jiaqi Zhu

    Center for Composite Materials and Structures, School of Astronautics, Harbin Institute of Technology, Harbin 150006, China

    8 shared publications
  • Bing Dai

    National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology

    6 shared publications
  • Jiwen Zhao

    6 shared publications
  • Benjian Liu

    National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology

    5 shared publications
  • Benjian Liu

    National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, China

    5 shared publications
  • Pengfei Qiao

    National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, China

    5 shared publications

Latest Publications

  • Open Access

    Design and Simulation of a High-Stability Diamond MEMS Accelerometer

    by Bao-Feng Guo, Sen Zhang, Chongze Yue, Linlin Liu, Jiwen Zhao, Yicun Li, Bing Dai, Benjian Liu, Jiaqi Zhu, Mikhail V. Shestakov, et al.

    High-performance MEMS accelerometers are essential for extreme-environment applications including deep-space exploration and transient-shock monitoring. Conventional semiconductor materials can exhibit structural failure, thermal drift, and parasitic-mode interference under overload. This study presents the design, simulation, and structural optimization of a single-crystal-diamond (SCD) MEMS accelerometer. A multiphysics finite-element framework compares Si, GaAs, SiC, and SCD in linear dynamic range, thermal stability, modal behavior, thermoelastic frequency stability, and mechanical survivability.To suppress out-of-plane modal competition in thin architectures, a one-step global-thickening strategy advanced the X-axis working mode to first order and increased the fundamental resonant frequency to 32.22 kHz. Temperature-dependent eigenfrequency calculations show an SCD thermal frequency coefficient of about -6 ppm/°C from -40 to 120 °C, markedly lower than those of Si, GaAs, and SiC. Direct electromechanical simulations show negligible sensing-channel displacement under Y-axis excitation, whereas out-of-plane Z-axis motion produces appreciable capacitance drift, demonstrating the need for modal purification from a readout perspective. Fabrication-tolerance sweeps indicate that thickness perturbations preserve the intended first-order working mode, while spring-width and proof-mass-length deviations can reorder low-order modes.Leveraging diamond's high specific stiffness and fracture strength, the optimized device achieves a ±800 g linear dynamic range, a quality factor of 6761, and a safety factor of 6.84 under 10,000 g shock. These results establish SCD as a promising structural material for high-frequency, high-stability MEMS accelerometers operating in extreme environments.

  • Open Access

    Revealing the dominant decoherence mechanism in high-nitrogen shallow NV centers through dielectric interface engineering

    by Yunpeng Yang, Sen Zhang, Ruizhi Zhang, Binxiao Fu, Benjian Liu, Zuanquan Chen, Rui Chen, Chao Chen, Wensi Yang, Shiya Zheng, et al.

    Shallow nitrogen-vacancy (NV) centers in diamond are promising room-temperature spin qubits for nanoscale quantum sensing. Nevertheless, surface charge fluctuations and interfacial spin noise collectively compromise NV charge-state stability and degrade spin coherence. In this work, we propose a two-step surface passivation strategy in which the diamond surface is first oxygen-terminated, and then capped with an Al₂O₃ dielectric layer. This dual surface treatment effectively suppresses surface charge noise and increases the spin coherence time T2 by a factor of 1.49 relative to untreated diamond. Spin echo measurements under variable transverse magnetic fields reveal that the decoherence rates of all samples declines monotonically with increasing magnetic field strength and converges to a unified saturation plateau at high fields. This consistent saturation behavior strongly indicates that spin noise originating from substitutional nitrogen is the dominant decoherence source in nitrogen-rich diamond. This work quantitatively differentiates the respective contributions of surface charge noise and paramagnetic spin noise in shallow NV systems, and offers a viable surface engineering route for enhancing spin coherence in NV-based quantum sensing platforms.

  • Open Access

    Synthesis of Porous Diamond Architectures via Catalytic H2/O2 Plasma Etching Mediated by Transition Metals

    by Jiaqi Zhu, Dongyue Wen, Yicun Li, Victor Ralchenko, Jiwen Zhao, Yumin Zhang, Chufei Cheng, Bao-Feng Guo, Ruihao Li, Sen Zhang, et al.

    The smooth and low specific surface area of conventional diamond materials severely limit their performance in surface-sensitive applications such as grinding/polishing, energy storage, and catalysis. Porous diamond materials with high surface area and self-sharpening capability have emerged as a frontier in diamond research. This study modified traditional metal-catalyzed etching techniques to construct interconnected porous structures on single-crystal diamond surfaces, featuring pore diameters (1-40 μm) and depths (50 μm), achieving a specific surface area of 82.63 m2/g. Raman spectroscopy and EDS analysis confirmed the preservation of diamond crystallinity and intrinsic properties during processing. The resultant porous boron-doped diamond (BDD) electrodes exhibited a remarkable specific capacitance of 58.65 mF/cm2, representing a 63.4-fold enhancement over pristine electrodes. The assembled pouch-type supercapacitor demonstrated a record-high energy density of 38.64 Wh/kg among diamond-based devices, coupled with a specific capacitance of 93 mF/cm2 and 92.7% capacitance retention over 10,000 cycles.

  • Open Access

    Structural and electronic properties of NV 0 and NV − centers in diamond under uniaxial strain: a first-principles study

    by Linlin Liu, Sen Zhang, Kunlong Zhao, Wensi Yang, Yunpeng Yang, Rui Fan, Chao Chen, Zuanquan Chen, Yejun Li, Mikhail V. Shestakov, et al.

  • Ultrahigh On/Off Ratio (110) Diamond Transistors with Exceptional Reproducibility of Normally Off Characteristics

    by Wenchao Zhang, Benjian Liu, Sen Zhang, Xiaohui Zhang, Pengfei Qiao, Bo Liang, Saifei Fan, Tao Su, Kang Liu, Bing Dai, et al.

    The development of monolithic integrated energy-efficient complementary circuits is crucial for the large-scale application of wide bandgap semiconductor-based high-frequency and high-power field-effect transistors (FETs). However, the inferior performance of p-channel FETs attributed to low hole density and mobility presents a substantial challenge. Diamond is a promising candidate due to its excellent comprehensive electrical properties and high thermal conductivity. Here, we report the fabrication of normally off diamond FETs based on a low work function metal gate and (110) hydrogen-terminated diamond with high hole density. The use of high-quality SiO2 layer ensures the complete depletion of the channel by the gate and offers high gating efficiency. Therefore, the developed devices demonstrate exceptional reproducibility of normally off characteristics with centrally distributed threshold voltages (-0.37 +/- 0.3 V) and realize large current and voltage handling capabilities and low static standby power consumption in a synergic manner with record-high on/off ratio exceeding 10(10), high current density (similar to 200 mu Amu m(-1)), ultralow off-state current (similar to fAmu m(-1)), and high breakdown voltage (-676 V). Additionally, the thermal desorption of negatively charged acceptors has been proven to significantly reduce carrier scattering. This work offers superior performance p-channel FETs for implementing energy-efficient complementary circuits, laying the groundwork for accelerated development in wide bandgap semiconductor power electronics.


  • Open Access

    Numerical Study on the Heat Dissipation Performance of Diamond Microchannels under High Heat Flux Density

    by Jiwen Zhao, Kunlong Zhao, Xiaobin Hao, Yicun Li, Sen Zhang, Benjian Liu, Bing Dai, Wenxin Cao, Jiaqi Zhu

    Heat dissipation significantly limits semiconductor component performance improvement. Thermal management devices are pivotal for electronic chip heat dissipation, with the enhanced thermal conductivity of materials being crucial for their effectiveness. This study focuses on single-crystal diamond, renowned for its exceptional natural thermal conductivity, investigating diamond microchannels using finite element simulations. Initially, a validated mathematical model for microchannel flow heat transfer was established. Subsequently, the heat dissipation performance of typical microchannel materials was analyzed, highlighting the diamond’s impact. This study also explores diamond microchannel topologies under high-power conditions, revealing unmatched advantages in ultra-high heat flux density dissipation. At 800 W/cm2 and inlet flow rates of 0.4–1 m/s, diamond microchannels exhibit lower maximum temperatures compared to pure copper microchannels by 7.0, 7.2, 7.4, and 7.5 °C, respectively. Rectangular cross-section microchannels demonstrate superior heat dissipation, considering diamond processing costs. The exploration of angular structures with varying parameters shows significant temperature reductions with increasing complexity, such as a 2.4 °C drop at i = 4. The analysis of shape parameter ki indicates optimal heat dissipation performance at ki = 1.1. This research offers crucial insights for developing and optimizing diamond microchannel devices under ultra-high-heat-flux-density conditions, guiding future advancements in thermal management technology.


  • Surface potential pinning study for oxygen terminated IIa diamond

    by Sen Zhang, Kang Liu, Benjian Liu, Xiaohui Zhang, Pengfei Qiao, Jiwen Zhao, Yicun Li, Xiaobin Hao, Ying Liang, Bo Liang, et al.


  • Self-Powered Solar-Blind UV Detectors Based on O-Terminated Vertical Diamond Schottky Diode with Low Dark Current, High Detectivity, and High Signal-to-Noise Ratio

    by Benjian Liu, Kang Liu, Sen Zhang, Victor Grigorievich Ralchenko, Xiaohui Zhang, Jingjing Xue, Dongyue Wen, Pengfei Qiao, Jiwen Zhao, Bing Dai, et al.


  • Enhanced conversion efficiency of vacancy-related color centers in diamonds grown on a patterned metal surface by chemical vapor deposition

    by Sen Zhang, Benjian Liu, Jiwen Zhao, Yicun Li, Xiaobin Hao, Xiaohui Zhang, Pengfei Qiao, Ying Liang, Bo Liang, Wenchao Zhang, et al.


  • High temperature operation of logic AND gate based on diamond Schottky diodes fabricated by selective growth method

    by Benjian Liu, Sen Zhang, Viktor Ralchenko, Dongyue Wen, Xiaohui Zhang, Jingjing Xue, Pengfei Qiao, Weihua Wang, Jiwen Zhao, Wenxin Cao, et al.