WHWenkai He

Wenkai He

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenkai He has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Novel Transient Electric Field Measurement for Low Kerr Constant Liquid Dielectrics Based on Concave Spherical Mirror Conjugate Structure

    by Zhaotian Zhang, Shilin Wu, Wenkai He, Qing Yang

    This paper proposes a Kerr effect electric field measurement method based on a concave spherical mirror conjugate structure (CSM CS) for a transient electric field in low Kerr constant liquid dielectrics. The accuracy of transient electric field measurement can be greatly improved in a limited space by multiple small-angle reflections. To verify the effect of the proposed structure, the electric field distribution is measured in propylene carbonate (PC) with a high Kerr constant at a switching overvoltage. The measurement results show that the electric field error of PC under an extremely low electric field is only about 2%. The novel structure improves the electric field measurement accuracy of a liquid with high kerr constant. Then, the whole device is applied to the transformer oil, and the accuracy of the measured electric field is also greatly improved. At the same electrode size, the sensitivity of measuring the electric field with the proposed structure is three times that without it. The analysis results show that the introduction of the proposed structure has little effect on the electric field measurement. The proposal and application of the proposed CSM CS further expand the electric field measurement range based on the Kerr effect and improves the electric field measurement accuracy.


  • Vacancy-rich graphene supported electrocatalysts synthesized by radio-frequency plasma for oxygen evolution reaction

    by Wenkai He, Shilin Wu, Zhaotian Zhang, Qing Yang

    Transition metals and their compounds supported on graphene are promising electrocatalysts for application. Their catalytic performance benefits from the vacancy defects of these electrolytes. However, the facile and effective generation of vacancy defects is still a challenge, and the role of vacancy defects is also unclear. In this work, an efficient radio-frequency (RF) plasma treatment strategy has been employed to achieve sulfur vacancies and oxygen vacancies in electrocatalysts for the oxygen evolution reaction. H2, Ar/H2, and Ar were used for the generation of plasma, respectively. Plasma treatment was found to reduce Co3+ to Co2+, and create sulfur and oxygen vacancy defects on the surface of cobalt compounds and graphene. The reactive radicals generated by plasma reduce graphene oxide to graphene nanosheets, which provide space for the movement of carriers and nanoparticles. Among the three different plasma systems, the H2 plasma has the most prominent ability to create vacancy defects in the electrocatalysts. The XRD pattern and Raman spectrum of the catalyst prepared by H2 plasma show large displacement, indicating that the plasma is responsible for changing the lattice parameters and cell volume, and vacancy defect structure of the sample. The overpotential of H2-VS/rGO was 340 mV at 50 mA cm−2 and the Tafel slope was 84.4 mV dec−1. After 12 hours of amperometric i–t curve test, its OER performance was found to surpass that of IrO2. DFT calculation results show that the vacancy defects effectively regulate the electronic structure, enhance the electron migration efficiency and promote the adsorption process of OER. The method of plasma treatment for creating vacancy structures is facile and effective, which provides a new route for the preparation of OER catalysts.


  • Temperature Effect on Dielectric Properties of Propylene Carbonate under Switching Overvoltage

    by Zhaotian Zhang, Qing Yang, Shilin Wu, Wenkai He

    Temperature can change the charge injection and migration characteristics in the liquid, affecting the insulation performance. First, the influence of temperature on the permittivity and Kerr constant of the liquid dielectric is studied. Also, the results prove that the permittivity and Kerr constant of propylene carbonate (PC) decrease with the increase of temperature. Moreover, to explore the influence of temperature on the insulation performance of propylene carbonate, we build a temperature-controllable breakdown test platform under voltage impulse, and the breakdown voltage of PC increases slightly with the increase in temperature. Based on the electrooptic effect, an optical platform is built to measure the electric field under the switching overvoltage. In addition, the space charge distribution is calculated, and the results indicated that the temperature in the range of 10 °C–40 °C is negatively correlated with the net space charge injection. Finally, the temperature effect on the rate of change and mobility of the space charges is explored.


  • Thickness Effect of TiO2 Film Deposited on a Blade-Plate Electrode Surface on Breakdown Characteristics of Propylene Carbonate

    by Zhaotian Zhang, Qing Yang, Shilin Wu, Wenkai He

    Low-temperature plasma surface modification technology can help optimize the physical and chemical properties of materials. In this study, TiO 2 films with thicknesses of approximately 100, 200, and 300 nm are prepared on an electrode surface using the magnetron sputtering method to explore the effect of film thickness on the breakdown characteristics of the liquid dielectric. The breakdown voltage of the liquid dielectric under a non-uniform electric field is determined using the Weibull distribution method. Based on the Kerr electro-optical effect, the changes in the spatial electric field along the symmetrical line of the blade-plate electrode gap are measured. The results show that compared to the undeposited state, the positive breakdown voltage of the liquid dielectric increases by 8.0%, 13.4%, and 15.9% corresponding to film thicknesses of 100, 200, and 300 nm, respectively, whereas the negative breakdown voltage increases by only 2.3%, 4.4%, and 5.7%. The TiO 2 film on the electrode surface has a greater impact on the increase in the breakdown voltage of the positive polarity, resulting in a decrease in the difference between the breakdown voltage of the positive and negative polarity. Therefore, it has great potential in improving the insulation performance of liquid dielectrics under uneven electric fields.