Tingting Yao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tingting Yao has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Yijie Wang
Harbin Institute of Technology
14 shared publications - Yueshi Guan
Harbin Institute of Technology
14 shared publications - Dianguo Xu
Harbin Institute of Technology
13 shared publications - Wei Wang
Harbin Institute of Technology
11 shared publications - Mingfei Ban
College of Control and Information Engineering, Northeast Forestry University, Harbin 150040, China
5 shared publications - Yiqi Liu
Northeast Forestry University
5 shared publications
Latest Publications
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 11079-11097
A Soft-Switching Multiresonant Switched-Capacitor Converter for Data Center Applications
In recent years, the rapid development of information technology has led to increasing power supply pressure on data centers. In this application scenarios, resonant switched-capacitor converters that can achieve high efficiency and power density have become an indispensable part of data center power supply systems. This paper proposes a high voltage step-down ratio resonant switched-capacitor converter. The construction method of this converter topology can also provide strong support for the construction of other step-down ratio high performance RSC topologies. After detailed modal design in this paper, the proposed converter can operate in two different soft switching modes, ZCS and ZVS, which is of great significance for improving the efficiency of the converter. In order to ensure the optimal operation of the converter, this paper uses the state-plane analysis method to conduct in-depth analysis of the resonant state of the converter, and based on this, guides the design of various parameters. In order to verify the theoretical analysis, a 48-to-6 V experimental prototype with 60 A output current for data center applications is built in the laboratory. The prototype can ultimately achieve a peak efficiency of 98.2% and a power density of 1714 W/in3, demonstrating good overall performance.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 11079-11097
A Soft-Switching Multiresonant Switched-Capacitor Converter for Data Center Applications
In recent years, the rapid development of information technology has led to increasing power supply pressure on data centers. In this application scenarios, resonant switched-capacitor converters that can achieve high efficiency and power density have become an indispensable part of data center power supply systems. This paper proposes a high voltage step-down ratio resonant switched-capacitor converter. The construction method of this converter topology can also provide strong support for the construction of other step-down ratio high performance RSC topologies. After detailed modal design in this paper, the proposed converter can operate in two different soft switching modes, ZCS and ZVS, which is of great significance for improving the efficiency of the converter. In order to ensure the optimal operation of the converter, this paper uses the state-plane analysis method to conduct in-depth analysis of the resonant state of the converter, and based on this, guides the design of various parameters. In order to verify the theoretical analysis, a 48-to-6 V experimental prototype with 60 A output current for data center applications is built in the laboratory. The prototype can ultimately achieve a peak efficiency of 98.2% and a power density of 1714 W/in3, demonstrating good overall performance.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 10735-10745
Analysis and Optimal Control of MHz Power Amplifier Under Wide Operating Load Range
In this paper, a high performance MHz power amplifier system is proposed. The proposed system is based on multiple inverter module, in the paper, the Class E inverter is taken as an example. The optimal control for Class E inverter is proposed based on adjusting the duty cycles. Under different load conditions, the duty cycles can be calculated to achieve well soft switching. Meanwhile, the parallel network to connect different modules is analysis, which can help to achieve a better equivalent impedance for each module. A continuous output power adjustment control method under wide range is proposed to achieve high efficiency based on optimal phase shift angle and enable module number. To verify theoretical analysis, the hardware prototype is built, compared with typical Chireix or four-way system the proposed one shows better efficiency under wide load range.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 10735-10745
Analysis and Optimal Control of MHz Power Amplifier Under Wide Operating Load Range
In this paper, a high performance MHz power amplifier system is proposed. The proposed system is based on multiple inverter module, in the paper, the Class E inverter is taken as an example. The optimal control for Class E inverter is proposed based on adjusting the duty cycles. Under different load conditions, the duty cycles can be calculated to achieve well soft switching. Meanwhile, the parallel network to connect different modules is analysis, which can help to achieve a better equivalent impedance for each module. A continuous output power adjustment control method under wide range is proposed to achieve high efficiency based on optimal phase shift angle and enable module number. To verify theoretical analysis, the hardware prototype is built, compared with typical Chireix or four-way system the proposed one shows better efficiency under wide load range.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 10526-10536
Analysis and Design of Constant AC Current Output Isolated Resonant Inverter With Coupled Inductors
This article proposes a novel isolated resonant inverter with constant ac current output. Within wide load range, the proposed isolated resonant inverter can achieve low voltage stress across the switch and zero voltage turn-on. A detailed characteristics analysis of the proposed isolated resonant inverter is performed in time domain, obtaining the constant ac output, zero-voltage switching conditions and parameter design procedure. For galvanic isolation, coupled inductors are added to the proposed isolated resonant inverter to replace the input choke inductor and output filter inductor. Finally, the 13.56 MHz experimental prototype of 90.9% peak efficiency is implemented to verify the above analysis. Without closed-loop control, the protype can achieve 2 A ac constant output when the load varies from 1 and 30 Ω.
- 1 July 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (7) , 10526-10536
Analysis and Design of Constant AC Current Output Isolated Resonant Inverter With Coupled Inductors
This article proposes a novel isolated resonant inverter with constant ac current output. Within wide load range, the proposed isolated resonant inverter can achieve low voltage stress across the switch and zero voltage turn-on. A detailed characteristics analysis of the proposed isolated resonant inverter is performed in time domain, obtaining the constant ac output, zero-voltage switching conditions and parameter design procedure. For galvanic isolation, coupled inductors are added to the proposed isolated resonant inverter to replace the input choke inductor and output filter inductor. Finally, the 13.56 MHz experimental prototype of 90.9% peak efficiency is implemented to verify the above analysis. Without closed-loop control, the protype can achieve 2 A ac constant output when the load varies from 1 and 30 Ω.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 15182-15198
A High-Performance Step-Down DC–DC Converter With Low Output Impedance
For decades, switched-capacitor converters (SCCs) have been widely studied and applied with the ability of high efficiency and power density. With the continuous enrichment and expansion of its application scenarios, the voltage conversion ratio and working efficiency of SCCs are facing increasingly high requirements. This article proposes a high voltage step-down ratio switched-capacitor converter. This converter has obviously lower flying capacitor voltages than existing solutions, and thus, the effect of dc bias on multilayer ceramic capacitor is reduced and has a lower output impedance, thereby achieving higher working efficiency. In addition, the influence of capacitance on the output impedance of the converter is also analyzed in detail in this paper through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can finally achieve a peak efficiency of 97.15%, which is significantly higher than existing solutions.
- 20 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (10) , 15182-15198
A High-Performance Step-Down DC–DC Converter With Low Output Impedance
For decades, switched-capacitor converters (SCCs) have been widely studied and applied with the ability of high efficiency and power density. With the continuous enrichment and expansion of its application scenarios, the voltage conversion ratio and working efficiency of SCCs are facing increasingly high requirements. This article proposes a high voltage step-down ratio switched-capacitor converter. This converter has obviously lower flying capacitor voltages than existing solutions, and thus, the effect of dc bias on multilayer ceramic capacitor is reduced and has a lower output impedance, thereby achieving higher working efficiency. In addition, the influence of capacitance on the output impedance of the converter is also analyzed in detail in this paper through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can finally achieve a peak efficiency of 97.15%, which is significantly higher than existing solutions.
- Open Access
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 872-882
High Frequency Resonant Inverter System With Stacked Architecture and Merging Network
In this paper, a high frequency resonant inverter system with stacked architecture and merging network is analyzed. The design method of multi-resonant circuit is given in detail. The parameter is designed by time domain analysis method which is more accurate than frequency domain method. Based on the single resonant circuit, a stacked topology is analyzed which can greatly reduce the switch voltage stress to almost around the input voltage. Meanwhile, the passive component can be merged to further reduce the number of inductor. Also the soft switching characteristics can be extended from rated resistive load to a range of resistive load by the merged passive network. The detailed operating principle and parameters design method are introduced. A 6.78MHz experimental prototype is built to verify theoretical analysis and soft switching characteristics can be maintained between 25% to 100% load range and the peak efficiency can be 92.85%.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 6, 872-882
Open AccessHigh Frequency Resonant Inverter System With Stacked Architecture and Merging Network
In this paper, a high frequency resonant inverter system with stacked architecture and merging network is analyzed. The design method of multi-resonant circuit is given in detail. The parameter is designed by time domain analysis method which is more accurate than frequency domain method. Based on the single resonant circuit, a stacked topology is analyzed which can greatly reduce the switch voltage stress to almost around the input voltage. Meanwhile, the passive component can be merged to further reduce the number of inductor. Also the soft switching characteristics can be extended from rated resistive load to a range of resistive load by the merged passive network. The detailed operating principle and parameters design method are introduced. A 6.78MHz experimental prototype is built to verify theoretical analysis and soft switching characteristics can be maintained between 25% to 100% load range and the peak efficiency can be 92.85%.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 7994-8004
Multi Module Parallel MHz Power Amplifier with Hybrid Structure and Optimized Control Strategy
Megahertz power amplifiers typically modulate power by paralleled-architectures and outphasing methods. However, when power drops in a large ratio, the effective admittances of modules are always not within the high-efficiency range. This article optimizes four-paralleled-module system through two operation modes: four modules turn-on at high power and two modules turn-on at low power to reduce the effective susceptance range at low power. In addition, a combining network consisting of four independently optimized T-networks is proposed to provide ideal load conditions for each module during phase variation. With the help of new networks and hybrid modes, the system is optimized to ensure that the effective admittance trajectory of each module is within the minimum loss range. A 13.56 MHz prototype consisting of four Class E modules is constructed, which maintains an efficiency of 76%–89% with output power of 20–200 W, with an average improvement of 9.5% compared to asymmetric Chireix methods.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (6) , 7994-8004
Multi Module Parallel MHz Power Amplifier with Hybrid Structure and Optimized Control Strategy
Megahertz power amplifiers typically modulate power by paralleled-architectures and outphasing methods. However, when power drops in a large ratio, the effective admittances of modules are always not within the high-efficiency range. This article optimizes four-paralleled-module system through two operation modes: four modules turn-on at high power and two modules turn-on at low power to reduce the effective susceptance range at low power. In addition, a combining network consisting of four independently optimized T-networks is proposed to provide ideal load conditions for each module during phase variation. With the help of new networks and hybrid modes, the system is optimized to ensure that the effective admittance trajectory of each module is within the minimum loss range. A 13.56 MHz prototype consisting of four Class E modules is constructed, which maintains an efficiency of 76%–89% with output power of 20–200 W, with an average improvement of 9.5% compared to asymmetric Chireix methods.
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 7029-7041
A Family of Class EF Resonant Inverters With Constant AC Voltage Output and Load-Independent Characteristics
A family of Class EF resonant inverters with constant ac voltage output and load-independent characteristics is proposed in this article. Moreover, the design principle of Class EF resonant topologies and their load-independent characteristics are concluded. The low voltage or current stress across the switch can be achieved by the second-order resonant network. Furthermore, the common-ground Class E/F resonant inverter and its load-independent design procedure are introduced. Constant ac voltage output and zero-voltage switching can be achieved by the proposed inverter for a wide load range. To validate the theoretical analysis, the 1-MHz experimental prototype is built and the peak efficiency is 93.4%.
- 6 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (5) , 7029-7041
A Family of Class EF Resonant Inverters With Constant AC Voltage Output and Load-Independent Characteristics
A family of Class EF resonant inverters with constant ac voltage output and load-independent characteristics is proposed in this article. Moreover, the design principle of Class EF resonant topologies and their load-independent characteristics are concluded. The low voltage or current stress across the switch can be achieved by the second-order resonant network. Furthermore, the common-ground Class E/F resonant inverter and its load-independent design procedure are introduced. Constant ac voltage output and zero-voltage switching can be achieved by the proposed inverter for a wide load range. To validate the theoretical analysis, the 1-MHz experimental prototype is built and the peak efficiency is 93.4%.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 4952-4968
A Soft-Switching High Step-Down Regulated DC–DC Converter: Topology Construction and Control Method
Resonant switched-capacitor converters have been widely studied and applied with the ability of high efficiency and power density, which well meets the requirements of data center power supply systems. However, due to its operation in DC transformer (DCX) mode, it does not have the ability to regulate voltage, which limits its application in certain situations and makes it difficult to meet the continuously increasing demand for data center applications. This article proposes a soft-switching high voltage step-down ratio hybrid switched-capacitor converter with voltage regulation capability and their corresponding phase-shift voltage regulation method. The voltage regulation principle and soft switching characteristics are analyzed in detail through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can achieve 12 V output voltage under 40–60 V input voltage and the power density achieves 1987 W/in3 with 98.4% peak efficiency.
- 9 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (4) , 4952-4968
A Soft-Switching High Step-Down Regulated DC–DC Converter: Topology Construction and Control Method
Resonant switched-capacitor converters have been widely studied and applied with the ability of high efficiency and power density, which well meets the requirements of data center power supply systems. However, due to its operation in DC transformer (DCX) mode, it does not have the ability to regulate voltage, which limits its application in certain situations and makes it difficult to meet the continuously increasing demand for data center applications. This article proposes a soft-switching high voltage step-down ratio hybrid switched-capacitor converter with voltage regulation capability and their corresponding phase-shift voltage regulation method. The voltage regulation principle and soft switching characteristics are analyzed in detail through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can achieve 12 V output voltage under 40–60 V input voltage and the power density achieves 1987 W/in3 with 98.4% peak efficiency.