Jill Stewart
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jill Stewart has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Paul Stewart
Institute for Innovation in Sustainable Engineering, University of Derby, Derby, U.K.
13 shared publications - Daniel Thomas Gladwin
University of Sheffield
6 shared publications - Chris M. Bingham
University of Lincoln
3 shared publications - Maarten W. Taal
Centre for Kidney Research and Innovation, School of Medicine, University of Nottingham, Derby, UK
3 shared publications - Nicholas M. Selby
Centre for Kidney Research and Innovation, School of Medicine, Derby Medical School Campus, Academic Unit for Translational Medical Sciences, University of Nottingham, Royal Derby Hospital, Derby DE22 3DT, UK
3 shared publications Tim Smith
Lincoln School of Engineering, University of Lincoln, UK
3 shared publications
Latest Publications
- 11 September 2025
- Published by Wolters Kluwer Health in Journal of the American Society of Nephrology
- Vol. 37 (5) , 1078-1080
Noninvasive Continuous Systolic BP Estimation
- 11 September 2025
- Published by Wolters Kluwer Health in Journal of the American Society of Nephrology
- Vol. 37 (5) , 1078-1080
Noninvasive Continuous Systolic BP Estimation
- Open Access
- 8 December 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-18
Application of the Lomb-Scargle Periodogram to InvestigateHeart Rate Variability during Haemodialysis
Short-term cardiovascular compensatory responses to perturbations in the circulatory system caused by haemodialysis can be investigated by the spectral analysis of heart rate variability, thus providing an important variable for categorising individual patients’ response, leading to a more personalised treatment. This is typically accomplished by resampling the irregular heart rate to generate an equidistant time series prior to spectral analysis, but resampling can further distort the data series whose interpretation can already be compromised by the presence of artefacts. The Lomb–Scargle periodogram provides a more direct method of spectral analysis as this method is specifically designed for large, irregularly sampled, and noisy datasets such as those obtained in clinical settings. However, guidelines for preprocessing patient data have been established in combination with equidistant time-series methods and their validity when used in combination with the Lomb–Scargle approach is missing from literature. This paper examines the effect of common preprocessing methods on the Lomb–Scargle power spectral density estimate using both real and synthetic heart rate data and will show that many common techniques for identifying and editing suspect data points, particularly interpolation and replacement, will distort the resulting power spectrum potentially misleading clinical interpretations of the results. Other methods are proposed and evaluated for use with the Lomb–Scargle approach leading to the main finding that suspicious data points should be excluded rather than edited, and where required, denoising of the heart rate signal can be reliably accomplished by empirical mode decomposition. Some additional methods were found to be particularly helpful when used in conjunction with the Lomb–Scargle periodogram, such as the use of a false alarm probability metric to establish whether spectral estimates are valid and help automate the assessment of valid heart rate records, potentially leading to greater use of this powerful technique in a clinical setting.
- 8 December 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-18
Open AccessApplication of the Lomb-Scargle Periodogram to InvestigateHeart Rate Variability during Haemodialysis
Short-term cardiovascular compensatory responses to perturbations in the circulatory system caused by haemodialysis can be investigated by the spectral analysis of heart rate variability, thus providing an important variable for categorising individual patients’ response, leading to a more personalised treatment. This is typically accomplished by resampling the irregular heart rate to generate an equidistant time series prior to spectral analysis, but resampling can further distort the data series whose interpretation can already be compromised by the presence of artefacts. The Lomb–Scargle periodogram provides a more direct method of spectral analysis as this method is specifically designed for large, irregularly sampled, and noisy datasets such as those obtained in clinical settings. However, guidelines for preprocessing patient data have been established in combination with equidistant time-series methods and their validity when used in combination with the Lomb–Scargle approach is missing from literature. This paper examines the effect of common preprocessing methods on the Lomb–Scargle power spectral density estimate using both real and synthetic heart rate data and will show that many common techniques for identifying and editing suspect data points, particularly interpolation and replacement, will distort the resulting power spectrum potentially misleading clinical interpretations of the results. Other methods are proposed and evaluated for use with the Lomb–Scargle approach leading to the main finding that suspicious data points should be excluded rather than edited, and where required, denoising of the heart rate signal can be reliably accomplished by empirical mode decomposition. Some additional methods were found to be particularly helpful when used in conjunction with the Lomb–Scargle periodogram, such as the use of a false alarm probability metric to establish whether spectral estimates are valid and help automate the assessment of valid heart rate records, potentially leading to greater use of this powerful technique in a clinical setting.
- Open Access
- 4 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Translational Engineering in Health and Medicine
- Vol. 9, 1-9
A Feasibility Study of Non-Invasive Continuous Estimation of Brachial Pressure Derived From Arterial and Venous Lines During Dialysis
Objective: Intradialytic haemodynamic instability is a significant clinical problem, leading to end-organ ischaemia and contributing to morbidity and mortality in haemodialysis patients. Non-invasive continuous blood pressure monitoring is not currently part of routine practice but may aid detection and prevention of significant falls in blood pressure during dialysis. Brachial blood pressure is currently recorded intermittently during haemodialysis via a sphygmomanometer. Current methods of continuous non-invasive blood pressure monitoring tend to restrict movement, can be sensitive to external disturbances and patient movement, and can be uncomfortable for the wearer. Additionally, poor patient blood circulation can lead to unreliable measurements. In this feasibility study we performed an initial validation of a novel method and associated technology to continuously estimate blood pressure using pressure sensors in the extra-corporeal dialysis circuit, which does not require any direct contact with the person receiving dialysis treatment. Method: The paper describes the development of the measurement system and subsequent in vivo patient feasibility study with concurrent measurement validation by Finapres Nova physiological measurement device. Real-time physiological data is collected over the entire period of (typically 4-hour) dialysis treatment. Results: We identify a quasi-linear mathematical function to describe the relationship between arterial line pressure and brachial artery BP, which is confirmed in a patient study. The results from this observational study suggest that it is feasible to derive a continuous measurement of brachial pressure from continuous measurements of arterial and venous line pressures via an empirically based and updated mathematical model. Conclusion: The methodology presented requires no interfacing to proprietary dialysis machine systems, no sensors to be attached to the patient directly, and is robust to patient movement during treatment and also to the effects of the cyclical pressure waveforms induced by the hemodialysis peristaltic blood pump. This represents a key enabling factor to the development of a practical continuous blood pressure monitoring device for dialysis patients.
- 4 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Translational Engineering in Health and Medicine
- Vol. 9, 1-9
Open AccessA Feasibility Study of Non-Invasive Continuous Estimation of Brachial Pressure Derived From Arterial and Venous Lines During Dialysis
Objective: Intradialytic haemodynamic instability is a significant clinical problem, leading to end-organ ischaemia and contributing to morbidity and mortality in haemodialysis patients. Non-invasive continuous blood pressure monitoring is not currently part of routine practice but may aid detection and prevention of significant falls in blood pressure during dialysis. Brachial blood pressure is currently recorded intermittently during haemodialysis via a sphygmomanometer. Current methods of continuous non-invasive blood pressure monitoring tend to restrict movement, can be sensitive to external disturbances and patient movement, and can be uncomfortable for the wearer. Additionally, poor patient blood circulation can lead to unreliable measurements. In this feasibility study we performed an initial validation of a novel method and associated technology to continuously estimate blood pressure using pressure sensors in the extra-corporeal dialysis circuit, which does not require any direct contact with the person receiving dialysis treatment. Method: The paper describes the development of the measurement system and subsequent in vivo patient feasibility study with concurrent measurement validation by Finapres Nova physiological measurement device. Real-time physiological data is collected over the entire period of (typically 4-hour) dialysis treatment. Results: We identify a quasi-linear mathematical function to describe the relationship between arterial line pressure and brachial artery BP, which is confirmed in a patient study. The results from this observational study suggest that it is feasible to derive a continuous measurement of brachial pressure from continuous measurements of arterial and venous line pressures via an empirically based and updated mathematical model. Conclusion: The methodology presented requires no interfacing to proprietary dialysis machine systems, no sensors to be attached to the patient directly, and is robust to patient movement during treatment and also to the effects of the cyclical pressure waveforms induced by the hemodialysis peristaltic blood pump. This represents a key enabling factor to the development of a practical continuous blood pressure monitoring device for dialysis patients.
- Open Access
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
An Application of The Lomb-Scargle Periodogram To Investigate Heart Rate Variability During Haemodialysis
Objective: Short-term cardiovascular compensatory responses to perturbations in the circulatory system caused by haemodialysis can be investigated by spectral analysis of heart rate variability. This could provide an important variable for categorising individual patients response to haemodialysis leading to a more personalised treatment. However, data obtained over a four-hour haemodialysis treatment is significant in volume and subject to artefacts that can compromise its analysis.Methods: The Lomb-Scargle Periodogram can provide a robust method of generating power spectral density estimates for large, irregularly sampled and noisy data sets obtained in clinical settings, provided that careful attention is given to frequency limits. The effect of different pre-processing methods on the resulting power spectrum is explored with simulated and real heart rate variability data.Results: Common pre-processing methods for correcting individual artefacts in heart rate records, such as interpolation, are unreliable as they act as non-linear low-pass filters and distort the resulting spectral analysis. These distortions are present, but less apparent within patient data and can mislead clinical interpretations.Conclusion: It is more appropriate to exclude suspect data points than to edit them prior to spectral analysis via the Lomb- Scargle periodogram, and where required, de-noise the entire heart rate signal by empirical mode decomposition. The use of a False Alarm Probability metric can help establish whether spectral estimates are validSignificance: Methods established to pre-process time-invariant data prior to power spectral density estimation fail when used in conjunction with the Lomb-Scargle method.
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessAn Application of The Lomb-Scargle Periodogram To Investigate Heart Rate Variability During Haemodialysis
Objective: Short-term cardiovascular compensatory responses to perturbations in the circulatory system caused by haemodialysis can be investigated by spectral analysis of heart rate variability. This could provide an important variable for categorising individual patients response to haemodialysis leading to a more personalised treatment. However, data obtained over a four-hour haemodialysis treatment is significant in volume and subject to artefacts that can compromise its analysis.Methods: The Lomb-Scargle Periodogram can provide a robust method of generating power spectral density estimates for large, irregularly sampled and noisy data sets obtained in clinical settings, provided that careful attention is given to frequency limits. The effect of different pre-processing methods on the resulting power spectrum is explored with simulated and real heart rate variability data.Results: Common pre-processing methods for correcting individual artefacts in heart rate records, such as interpolation, are unreliable as they act as non-linear low-pass filters and distort the resulting spectral analysis. These distortions are present, but less apparent within patient data and can mislead clinical interpretations.Conclusion: It is more appropriate to exclude suspect data points than to edit them prior to spectral analysis via the Lomb- Scargle periodogram, and where required, de-noise the entire heart rate signal by empirical mode decomposition. The use of a False Alarm Probability metric can help establish whether spectral estimates are validSignificance: Methods established to pre-process time-invariant data prior to power spectral density estimation fail when used in conjunction with the Lomb-Scargle method.
- Open Access
- 1 November 2016
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 9 (6) , 2813-2822
Mathematical Model of a Constructal Coanda Effect Nozzle
- 1 November 2016
- Published by Academic World Research in Journal of Applied Fluid Mechanics
- Vol. 9 (6) , 2813-2822
Open AccessMathematical Model of a Constructal Coanda Effect Nozzle
- 26 April 2016
- Published by Wiley in Journal of Heat Transfer
- Vol. 138 (8) , 082801
Constructal Design of an Entropic Wall With Circulating Water Inside
An entropic wall with circulating water inside could be a solution for acclimatizing a new building with high-energy efficiency and high levels of internal comfort. If circulating water is thermally stabilized by exchanging in the ground such has it happens in geothermal plants, a thermal shield could be realized keeping walls in comfort conditions and minimizing energy needs for further temperature regulations. This paper presents optimization guidelines of such a wall with the objective of maximizing the performances of the wall for reaching optimal internal wellness conditions. Optimization has been realized by a constructal law based method, which has been personalized by a step-by-step process and has been named constructal design for efficiency (CDE). The optimization of the system has been produced at different levels. It starts from a preliminary analysis at system levels, which allow defining the best objectives that could be reached. After this preliminary process, the system has been divided into modules, and the critical ones which have higher influence on the performances of the system have been evaluated. This analysis has been coupled also with an industrial analysis with the goal of defining an effective layout, which could be also manufactured with acceptable costs. The result has produced a final solution with a very good compromise between energetic performances and minimization of costs at industrial level. The results open interesting perspectives for the constructal law to become the core of an effective methodology of an industrial design which can couple perfectly with the modular approach which is currently the major part of industrial companies.
- 26 April 2016
- Published by Wiley in Journal of Heat Transfer
- Vol. 138 (8) , 082801
Constructal Design of an Entropic Wall With Circulating Water Inside
An entropic wall with circulating water inside could be a solution for acclimatizing a new building with high-energy efficiency and high levels of internal comfort. If circulating water is thermally stabilized by exchanging in the ground such has it happens in geothermal plants, a thermal shield could be realized keeping walls in comfort conditions and minimizing energy needs for further temperature regulations. This paper presents optimization guidelines of such a wall with the objective of maximizing the performances of the wall for reaching optimal internal wellness conditions. Optimization has been realized by a constructal law based method, which has been personalized by a step-by-step process and has been named constructal design for efficiency (CDE). The optimization of the system has been produced at different levels. It starts from a preliminary analysis at system levels, which allow defining the best objectives that could be reached. After this preliminary process, the system has been divided into modules, and the critical ones which have higher influence on the performances of the system have been evaluated. This analysis has been coupled also with an industrial analysis with the goal of defining an effective layout, which could be also manufactured with acceptable costs. The result has produced a final solution with a very good compromise between energetic performances and minimization of costs at industrial level. The results open interesting perspectives for the constructal law to become the core of an effective methodology of an industrial design which can couple perfectly with the modular approach which is currently the major part of industrial companies.
- 17 November 2015
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (6) , 061502
Experimental and Numerical Investigation of Fuel–Air Mixing in a Radial Swirler Slot of a Dry Low Emission Gas Turbine Combustor
This paper presents the results of an investigation in which the fuel/air mixing process in a single slot within the radial swirler of a dry low emission (DLE) combustion system is explored using air/air mixing. Experimental studies have been carried out on an atmospheric test facility in which the test domain is a large-scale representation of a swirler slot from a Siemens proprietary DLE combustion system. Hot air with a temperature of 300 °C is supplied to the slot, while the injected fuel gas is simulated using air jets with temperatures of about 25 °C. Temperature has been used as a scalar to measure the mixing of the jets with the cross-flow. The mixture temperatures were measured using thermocouples while Pitot probes were used to obtain local velocity measurements. The experimental data have been used to validate a computational fluid dynamics (CFD) mixing model. Numerical simulations were carried out using CFD software ansys-cfx. Due to the complex three-dimensional flow structure inside the swirler slot, different Reynolds-averaged Navier–Stokes (RANS) turbulence models were tested. The shear stress transport (SST) turbulence model was observed to give best agreement with the experimental data. The momentum flux ratio between the main air flow and the injected fuel jet, and the aerodynamics inside the slot were both identified by this study as major factors in determining the mixing characteristics. It has been shown that mixing in the swirler can be significantly improved by exploiting the aerodynamic characteristics of the flow inside the slot. The validated CFD model provides a tool which will be used in future studies to explore fuel/air mixing at engine conditions.
- 17 November 2015
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 138 (6) , 061502
Experimental and Numerical Investigation of Fuel–Air Mixing in a Radial Swirler Slot of a Dry Low Emission Gas Turbine Combustor
This paper presents the results of an investigation in which the fuel/air mixing process in a single slot within the radial swirler of a dry low emission (DLE) combustion system is explored using air/air mixing. Experimental studies have been carried out on an atmospheric test facility in which the test domain is a large-scale representation of a swirler slot from a Siemens proprietary DLE combustion system. Hot air with a temperature of 300 °C is supplied to the slot, while the injected fuel gas is simulated using air jets with temperatures of about 25 °C. Temperature has been used as a scalar to measure the mixing of the jets with the cross-flow. The mixture temperatures were measured using thermocouples while Pitot probes were used to obtain local velocity measurements. The experimental data have been used to validate a computational fluid dynamics (CFD) mixing model. Numerical simulations were carried out using CFD software ansys-cfx. Due to the complex three-dimensional flow structure inside the swirler slot, different Reynolds-averaged Navier–Stokes (RANS) turbulence models were tested. The shear stress transport (SST) turbulence model was observed to give best agreement with the experimental data. The momentum flux ratio between the main air flow and the injected fuel jet, and the aerodynamics inside the slot were both identified by this study as major factors in determining the mixing characteristics. It has been shown that mixing in the swirler can be significantly improved by exploiting the aerodynamic characteristics of the flow inside the slot. The validated CFD model provides a tool which will be used in future studies to explore fuel/air mixing at engine conditions.
- Open Access
- 1 August 2014
- Published by Wiley in Ecological Monographs
- Vol. 84 (3) , 373-410
Modeling emergent patterns of dynamic desert ecosystems
In many desert ecosystems, vegetation is both patchy and dynamic: vegetated areas are interspersed with patches of bare ground, and both the positioning and the species composition of the vegetated areas exhibit change through time. These characteristics lead to the emergence of multi‐scale patterns in vegetation that arise from complex relationships between plants, soils, and transport processes. Previous attempts to probe the causes of spatial complexity and predict responses of desert ecosystems tend to be limited in their focus: models of dynamics have been developed with no consideration of the inherent patchiness in the vegetation, or else models have been developed to generate patterns with no consideration of the dynamics. Here we develop a general modelling framework for the analysis of ecosystem change in deserts that is rooted in the concept of connectivity and is derived from a detailed process‐based understanding. We explicitly consider spatial interactions among multiple vegetation types and multiple resources, and our model is formulated to predict responses to a variety of endogenous and exogenous disturbances. The model is implemented in the deserts of the American Southwest both to test hypotheses of the causes of the invasion of woody shrubs, and to test its ability to reproduce observed spatial differences in response to drought in the 20th century. The model's performance leads us to argue that vertical and lateral connectivity are key emergent properties of the ecosystem, which both control its behavior and provide indicators of its state. If this argument is shown to be compatible with field observations, the model presented here will provide a more certain approach toward preventing further degradation of semiarid grasslands.
- 1 August 2014
- Published by Wiley in Ecological Monographs
- Vol. 84 (3) , 373-410
Open AccessModeling emergent patterns of dynamic desert ecosystems
In many desert ecosystems, vegetation is both patchy and dynamic: vegetated areas are interspersed with patches of bare ground, and both the positioning and the species composition of the vegetated areas exhibit change through time. These characteristics lead to the emergence of multi‐scale patterns in vegetation that arise from complex relationships between plants, soils, and transport processes. Previous attempts to probe the causes of spatial complexity and predict responses of desert ecosystems tend to be limited in their focus: models of dynamics have been developed with no consideration of the inherent patchiness in the vegetation, or else models have been developed to generate patterns with no consideration of the dynamics. Here we develop a general modelling framework for the analysis of ecosystem change in deserts that is rooted in the concept of connectivity and is derived from a detailed process‐based understanding. We explicitly consider spatial interactions among multiple vegetation types and multiple resources, and our model is formulated to predict responses to a variety of endogenous and exogenous disturbances. The model is implemented in the deserts of the American Southwest both to test hypotheses of the causes of the invasion of woody shrubs, and to test its ability to reproduce observed spatial differences in response to drought in the 20th century. The model's performance leads us to argue that vertical and lateral connectivity are key emergent properties of the ecosystem, which both control its behavior and provide indicators of its state. If this argument is shown to be compatible with field observations, the model presented here will provide a more certain approach toward preventing further degradation of semiarid grasslands.
- Open Access
- 29 July 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 229 (6) , 1057-1075
Integrated flight/thrust vectoring control for jet-powered unmanned aerial vehicles with ACHEON propulsion
As a new alternative to tilting rotors or turbojet vector mechanical oriented nozzles, ACHEON (Aerial Coanda High Efficiency Orienting-jet Nozzle) has enormous advantages because it is free of moving elements and highly effective for vertical/short-take-off and landing (V/STOL) aircraft. In this article, an integrated flight/thrust vectoring (TV) control scheme for a jet-powered unmanned aerial vehicle (UAV) with an ACHEON nozzle is proposed to assess its suitability in jet aircraft flight applications. First, a simplified TV population model is built based on CFD simulation data and parameter identification. Second, this TV propulsion model is embedded as a jet actuator for a benchmark fixed-wing ‘Aerosonde’ UAV, and then a four ‘cascaded-loop’ controller, based on nonlinear dynamic inversion (NDI), is designed to individually control the angular rates (in the body frame), attitude angles (in the wind frame), track angles (in the navigation frame), and position (in the earth-centred frame) . Unlike previous research on fixed-wing UAV flight controls or TV controls, our proposed four-cascaded NDI control law can not only coordinate surface control and TV control as well as an optimization controller, but can also implement an absolute self-position control for the autopilot flight control. Finally, flight simulations in a high-fidelity aerodynamic environment are performed to demonstrate the effectiveness and superiority of our proposed control scheme.
- 29 July 2014
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 229 (6) , 1057-1075
Open AccessIntegrated flight/thrust vectoring control for jet-powered unmanned aerial vehicles with ACHEON propulsion
As a new alternative to tilting rotors or turbojet vector mechanical oriented nozzles, ACHEON (Aerial Coanda High Efficiency Orienting-jet Nozzle) has enormous advantages because it is free of moving elements and highly effective for vertical/short-take-off and landing (V/STOL) aircraft. In this article, an integrated flight/thrust vectoring (TV) control scheme for a jet-powered unmanned aerial vehicle (UAV) with an ACHEON nozzle is proposed to assess its suitability in jet aircraft flight applications. First, a simplified TV population model is built based on CFD simulation data and parameter identification. Second, this TV propulsion model is embedded as a jet actuator for a benchmark fixed-wing ‘Aerosonde’ UAV, and then a four ‘cascaded-loop’ controller, based on nonlinear dynamic inversion (NDI), is designed to individually control the angular rates (in the body frame), attitude angles (in the wind frame), track angles (in the navigation frame), and position (in the earth-centred frame) . Unlike previous research on fixed-wing UAV flight controls or TV controls, our proposed four-cascaded NDI control law can not only coordinate surface control and TV control as well as an optimization controller, but can also implement an absolute self-position control for the autopilot flight control. Finally, flight simulations in a high-fidelity aerodynamic environment are performed to demonstrate the effectiveness and superiority of our proposed control scheme.
- 16 June 2014
- Published by ASME International
Experimental and Numerical Investigation of Fuel-Air Mixing in a Radial Swirler Slot of a Dry Low Emission Gas Turbine Combustor
This paper presents the results of an investigation in which the fuel/air mixing process in a single slot within the radial swirler of a dry low emission (DLE) combustion system is explored using air/air mixing. Experimental studies have been carried out on an atmospheric test facility in which the test domain is a large-scale representation of a swirler slot from a Siemens DLE SGT-400 combustion system. Hot air with a temperature of 300°C is supplied to the slot, while the injected fuel gas is represented using air jets with temperatures of about 25°C. Temperature has been used as a scalar to measure the mixing of the jets with the cross-flow. The mixture temperatures were measured using thermocouples while Pitot probes were used to obtain local velocity measurements. The experimental data have been used to validate a computational fluid dynamics (CFD) mixing model. Numerical simulations were carried out using CFD software ANSYS-CFX. Due to the complex three-dimensional flow structure inside the swirler slot, different RANS turbulence models were tested. The shear stress transport (SST) turbulence model was observed to give best agreement with the experimental data. The momentum flux ratio between the main air flow and the injected fuel jet, and the aerodynamics inside the slot, were both identified by this study as major factors in determining the mixing characteristics. It has been shown that mixing in the swirler can be significantly improved by exploiting the aerodynamic characteristics of the flow inside the slot. The validated CFD model provides a tool which will be used in future studies to explore fuel/air mixing at engine conditions.
- 16 June 2014
- Published by ASME International
Experimental and Numerical Investigation of Fuel-Air Mixing in a Radial Swirler Slot of a Dry Low Emission Gas Turbine Combustor
This paper presents the results of an investigation in which the fuel/air mixing process in a single slot within the radial swirler of a dry low emission (DLE) combustion system is explored using air/air mixing. Experimental studies have been carried out on an atmospheric test facility in which the test domain is a large-scale representation of a swirler slot from a Siemens DLE SGT-400 combustion system. Hot air with a temperature of 300°C is supplied to the slot, while the injected fuel gas is represented using air jets with temperatures of about 25°C. Temperature has been used as a scalar to measure the mixing of the jets with the cross-flow. The mixture temperatures were measured using thermocouples while Pitot probes were used to obtain local velocity measurements. The experimental data have been used to validate a computational fluid dynamics (CFD) mixing model. Numerical simulations were carried out using CFD software ANSYS-CFX. Due to the complex three-dimensional flow structure inside the swirler slot, different RANS turbulence models were tested. The shear stress transport (SST) turbulence model was observed to give best agreement with the experimental data. The momentum flux ratio between the main air flow and the injected fuel jet, and the aerodynamics inside the slot, were both identified by this study as major factors in determining the mixing characteristics. It has been shown that mixing in the swirler can be significantly improved by exploiting the aerodynamic characteristics of the flow inside the slot. The validated CFD model provides a tool which will be used in future studies to explore fuel/air mixing at engine conditions.