S. Mohanraj
S. Mohanraj has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- V. Kavitha
M.Kumarasamy College of Engineering
2 shared publications - Anggun Fitrian Isnawati
Institute Teknologi Telkom Purwokerto
1 shared publication D. Francisca Kalavathi
PG Department of Environmental Science
1 shared publicationK. S. Surya
VLSI DESIGN, M. Kumarasamy College of Engineering, Karur, India
1 shared publication- Karuppanan Sakthisudhan
Dr. N.G.P. Institute of Technology, Coimbatore, India
1 shared publication M. Karthick
Department of Mechanical Engineering
1 shared publication
Latest Publications
- Open Access
- 22 May 2024
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
IoT-based Cyber-Physical System for Parkinson Inmates Using ML Prediction Algorithms
Most people in the eternal world we reawaken to are stressed and wrecked with diseases because of genetic, environmental, and emotional causes. There are many incurable diseases, but there are also ways to treat them that are hopeful and even life-extending. As a result, it is hypothesized that the prototype will limit the capacities of people with Parkinson's disease. It's a disease that causes degeneration in the brain and spinal cord. The most noticeable signs are trembling, stiffness, slowness of movement, and difficulty walking. Depression and anxiety are symptoms of dementia, a form of brain condition that worsens as a result of this disease. It also makes it hard to get to sleep at night. For some illnesses, we lack the diagnostic instrument necessary to determine the precise status of many conditions. Wearable sensors can diagnose Parkinson's disease (PD) in its earliest stages, when treatment is most effective. Brain wave detection and other forms of human chronicle are detected with effective sensors in the proposed system for Parkinson disease, demonstrating the improvement of the patient's central nervous system. Here, we use machine learning with a prediction algorithm to keep a close eye on the patient's progress and store the data in the cloud automatically so that we can reliably get an analysis of the patient's performance at any time. For better classification results, we create a prediction system based on the fuzzy k-nearest neighbor (FKNN). The suggested system may monitor patients in more ways than just by measuring vitals like heart rate, blood pressure, and temperature.
- 22 May 2024
- Published by El-Cezeri: Journal of Science and Engineering in El-Cezeri Fen ve Mühendislik Dergisi
Open AccessIoT-based Cyber-Physical System for Parkinson Inmates Using ML Prediction Algorithms
Most people in the eternal world we reawaken to are stressed and wrecked with diseases because of genetic, environmental, and emotional causes. There are many incurable diseases, but there are also ways to treat them that are hopeful and even life-extending. As a result, it is hypothesized that the prototype will limit the capacities of people with Parkinson's disease. It's a disease that causes degeneration in the brain and spinal cord. The most noticeable signs are trembling, stiffness, slowness of movement, and difficulty walking. Depression and anxiety are symptoms of dementia, a form of brain condition that worsens as a result of this disease. It also makes it hard to get to sleep at night. For some illnesses, we lack the diagnostic instrument necessary to determine the precise status of many conditions. Wearable sensors can diagnose Parkinson's disease (PD) in its earliest stages, when treatment is most effective. Brain wave detection and other forms of human chronicle are detected with effective sensors in the proposed system for Parkinson disease, demonstrating the improvement of the patient's central nervous system. Here, we use machine learning with a prediction algorithm to keep a close eye on the patient's progress and store the data in the cloud automatically so that we can reliably get an analysis of the patient's performance at any time. For better classification results, we create a prediction system based on the fuzzy k-nearest neighbor (FKNN). The suggested system may monitor patients in more ways than just by measuring vitals like heart rate, blood pressure, and temperature.
- RetractedOpen Access
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
[Retracted] Utilization of Eco‐Friendly Waste Eggshell Catalysts for Enhancing Liquid Product Yields through Pyrolysis of Forestry Residues
In this study, catalytic and noncatalytic pyrolysis of Prosopis juliflora biomass was carried out in a fluidized bed reactor. This study highlights the potential use of forestry residues with waste eggshells under a nitrogen environment. The experiments were conducted to increase the yield of bio‐oil by changing the parameters such as pyrolysis temperature, particle size, and catalyst ratio. Under noncatalytic pyrolysis, a maximum bio‐oil yield of 40.9 wt% was obtained when the feedstock was pyrolysed at 500°C. During catalytic pyrolysis, the yield of bio‐oil was increased by up to 16.95% compared to the noncatalytic process due to the influence of Ca‐rich wastes on devolatilization behavior. In particular, the existence of alkali and alkaline‐earth metals present in eggshells might have positive effects on the decomposition of biomass material. The bio‐oil obtained through catalytic pyrolysis under maximum yield conditions was analyzed for its physical and chemical characterization by Fourier transform infrared (FT‐IR) spectroscopy and gas chromatography mass spectroscopy (GC‐MS).
- 1 January 2022
- Published by Wiley in Journal of Nanomaterials
- Vol. 2022 (1)
RetractedOpen Access[Retracted] Utilization of Eco‐Friendly Waste Eggshell Catalysts for Enhancing Liquid Product Yields through Pyrolysis of Forestry Residues
In this study, catalytic and noncatalytic pyrolysis of Prosopis juliflora biomass was carried out in a fluidized bed reactor. This study highlights the potential use of forestry residues with waste eggshells under a nitrogen environment. The experiments were conducted to increase the yield of bio‐oil by changing the parameters such as pyrolysis temperature, particle size, and catalyst ratio. Under noncatalytic pyrolysis, a maximum bio‐oil yield of 40.9 wt% was obtained when the feedstock was pyrolysed at 500°C. During catalytic pyrolysis, the yield of bio‐oil was increased by up to 16.95% compared to the noncatalytic process due to the influence of Ca‐rich wastes on devolatilization behavior. In particular, the existence of alkali and alkaline‐earth metals present in eggshells might have positive effects on the decomposition of biomass material. The bio‐oil obtained through catalytic pyrolysis under maximum yield conditions was analyzed for its physical and chemical characterization by Fourier transform infrared (FT‐IR) spectroscopy and gas chromatography mass spectroscopy (GC‐MS).
- 1 January 2019
- Published by Inderscience Publishers in International Journal of Environment and Sustainable Development
- Vol. 18 (1) , 120-129
Green engineering principles for global water quality monitoring using IoT
Water is a vital resource without which most of the living beings cannot survive. The quality of drinking water depends on its source and storage conditions. Drinking water quality should meet the Environmental Protection Agency (EPA) regulations for quality assurance. Various purification methods are available to obtain pure drinking water. However, several industrialisation, globalisation, urbanisation, farming, and similar activities lead to drinking water contamination. Thus, the combined use of green engineering principles and internet of things (IoT) framework can aid simultaneous monitoring of water quality at different locations, at minimal costs and less need for manpower. This study proposes a system for real-time monitoring of water quality and detection of contamination, by using a wireless sensor network (WSN) to collect and transmit data. This system measures turbidity, pH, and temperature; these values are then processed using a controller and transmitted to the cloud through the WSN. The gathered data are highly accurate and can be accessed universally through the Internet by using a specific internet protocol address.
- 1 January 2019
- Published by Inderscience Publishers in International Journal of Environment and Sustainable Development
- Vol. 18 (1) , 120-129
Green engineering principles for global water quality monitoring using IoT
Water is a vital resource without which most of the living beings cannot survive. The quality of drinking water depends on its source and storage conditions. Drinking water quality should meet the Environmental Protection Agency (EPA) regulations for quality assurance. Various purification methods are available to obtain pure drinking water. However, several industrialisation, globalisation, urbanisation, farming, and similar activities lead to drinking water contamination. Thus, the combined use of green engineering principles and internet of things (IoT) framework can aid simultaneous monitoring of water quality at different locations, at minimal costs and less need for manpower. This study proposes a system for real-time monitoring of water quality and detection of contamination, by using a wireless sensor network (WSN) to collect and transmit data. This system measures turbidity, pH, and temperature; these values are then processed using a controller and transmitted to the cloud through the WSN. The gathered data are highly accurate and can be accessed universally through the Internet by using a specific internet protocol address.
- 28 February 2018
- Published by Springer Nature in Cluster Computing
- Vol. 22 (S3) , 7063-7068
High performance Viterbi decoder design
- 28 February 2018
- Published by Springer Nature in Cluster Computing
- Vol. 22 (S3) , 7063-7068
High performance Viterbi decoder design
- 1 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1397-1400
Design of efficient viterbi technique for interleaving and deinterleaving
Communication System is a collection of individual communications network, transmission systems, relay stations, tributary stations and data terminal equipments. In transmission system wireless communication is the transfer of information between two or more points that are not connected by an electrical conductor. WiMAX is the wireless communication standard designed to provide 30 to 40 Mega bits per second data rates. WiMAX as a standards based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL. WiMAX can provide at home or mobile internet access across whole cities or countries. The address generation of WiMAX is carried out by interleaver and deinterleaver. Interleaving is used to overcome correlated channel noise such as burst error or fading. The interleaver/deinterleaver rearranges input data such that consecutive data are spaced apart. The interleaved memory is to improve the speed of access to memory. The viterbi technique reduces the bit error rate.
- 1 February 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1397-1400
Design of efficient viterbi technique for interleaving and deinterleaving
Communication System is a collection of individual communications network, transmission systems, relay stations, tributary stations and data terminal equipments. In transmission system wireless communication is the transfer of information between two or more points that are not connected by an electrical conductor. WiMAX is the wireless communication standard designed to provide 30 to 40 Mega bits per second data rates. WiMAX as a standards based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL. WiMAX can provide at home or mobile internet access across whole cities or countries. The address generation of WiMAX is carried out by interleaver and deinterleaver. Interleaving is used to overcome correlated channel noise such as burst error or fading. The interleaver/deinterleaver rearranges input data such that consecutive data are spaced apart. The interleaved memory is to improve the speed of access to memory. The viterbi technique reduces the bit error rate.
- Open Access
- 1 January 2012
- Published by Elsevier in Procedia Engineering
- Vol. 30, 639-645
SERF and Modified SERF Adders for Ultra Low Power Design Techniques
- 1 January 2012
- Published by Elsevier in Procedia Engineering
- Vol. 30, 639-645
Open AccessSERF and Modified SERF Adders for Ultra Low Power Design Techniques