Yu Xing
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yu Xing has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Hua Xu
Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, Xi’an Jiaotong University, Xi’an, China
2 shared publications- Bo Li
Northwestern Polytechnical University
1 shared publication - Chao Liu
School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an 710048, China
1 shared publication - Daoyun Qiao
State Key Laboratory of Smart Manufacturing for Special Vehicles and Transmission System, Baotou 014030, China
1 shared publication - Erhu Zhang
School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, China
1 shared publication Hui Xi
Key Laboratory of Education Ministry for Modern Design and Rotor-Bearing System, Xi’an Jiaotong University, Xi’an, China
1 shared publication
Latest Publications
- Open Access
Dynamic Service Mechanism of Double-Row Spherical Roller Bearings Due to Self-Aligning Behavior
Spherical roller bearings (SRBs) are widely used under self-aligning operating conditions, such as rotor bending or an angular misalignment between inner and outer rings due to their self-aligning function. However, the characterization of SRBs’ self-aligning function is often ignored in the present models. The reason for this is that the self-aligning condition is essentially a fault condition, and many scholars have assumed SRBs are in an ideal operating condition. Although there is nothing wrong with this analysis theoretically, it is incapable of characterizing SRBs’ service behavior comprehensively. In this work, the Lagrange equation was introduced to model the relationship among the rollers and the inner and outer rings. The contact region in particular was characterized in detail in order to solve the problems of undetermined contact status (UCS) and the varying law of the self-aligning contact angle (SAC angle). For the experiment, a novel SRBs pedestal with a self-aligning operating condition was designed, and the relevant self-aligning function testing was carried out. A good agreement was shown between the theoretical and experimental results. The results pointed out that, if taking no account of the self-aligning function, SRBs can be regarded as angular contact ball bearings or cylinder roller bearings. The amplitude of the inner-ring motion orbit is determined by the external load, but the shape is influenced by the direction and magnitude of the SAC angle. In the example of this paper, the values of the main frequency equal 136.8 Hz. Some additional frequencies are clearly aroused under the self-aligning operating condition, whose value is approximately equal to 8.3 Hz or its integer multiples. The dynamic performance of SRBs will be substantially improved by a light axial load plus an anticlockwise self-aligning contact angle rather than a large axial preload.
Open AccessDynamic Service Mechanism of Double-Row Spherical Roller Bearings Due to Self-Aligning Behavior
Spherical roller bearings (SRBs) are widely used under self-aligning operating conditions, such as rotor bending or an angular misalignment between inner and outer rings due to their self-aligning function. However, the characterization of SRBs’ self-aligning function is often ignored in the present models. The reason for this is that the self-aligning condition is essentially a fault condition, and many scholars have assumed SRBs are in an ideal operating condition. Although there is nothing wrong with this analysis theoretically, it is incapable of characterizing SRBs’ service behavior comprehensively. In this work, the Lagrange equation was introduced to model the relationship among the rollers and the inner and outer rings. The contact region in particular was characterized in detail in order to solve the problems of undetermined contact status (UCS) and the varying law of the self-aligning contact angle (SAC angle). For the experiment, a novel SRBs pedestal with a self-aligning operating condition was designed, and the relevant self-aligning function testing was carried out. A good agreement was shown between the theoretical and experimental results. The results pointed out that, if taking no account of the self-aligning function, SRBs can be regarded as angular contact ball bearings or cylinder roller bearings. The amplitude of the inner-ring motion orbit is determined by the external load, but the shape is influenced by the direction and magnitude of the SAC angle. In the example of this paper, the values of the main frequency equal 136.8 Hz. Some additional frequencies are clearly aroused under the self-aligning operating condition, whose value is approximately equal to 8.3 Hz or its integer multiples. The dynamic performance of SRBs will be substantially improved by a light axial load plus an anticlockwise self-aligning contact angle rather than a large axial preload.
- Open Access
Mechanical Deformation Analysis of a Flexible Finger in Terms of an Improved ANCF Plate Element
In recent years, flexible continuum robots have been substantially developed. Absolute nodal coordinates formulation (ANCF) gives a feasible path for simulating the behavior of flexible robots. However, the model of finger-shaped robots is often regarded as a cylinder and characterized by a beam element. Obviously, this is short of characterizing the geometrical feature of fingers in detail, especially under bending conditions. Additionally, for the lower-order plate element, it is hard to characterize the bending behavior of the flexible finger due to fewer nodes; a higher-order plate element often requires an extremely long computing time. In this work, an improved ANCF lower-order plate element is used to increase the accuracy of the Yeoh model and characterize the geometrical structure of silicone rubber fingers, taking into particular consideration the effect of volume locks and multi-body system constraints. Since it is a kind of lower-order plate element, essentially, the computing time is nearly the same as that of conventional lower-order plate elements. The validity of this model was verified by comparing it with the results of the published reference. The flexible finger, manufactured using silicone rubber, is characterized by the novel ANCF lower-order plate element, whereby its mechanical deformation and bending behavior are simulated both efficiently and accurately. Compared to the ANCF beam element, conventional lower-order plate element, and higher-order plate element, the novel plate element in this paper characterizes the external contour of the finger better, reflects bending behavior more realistically, and converges in less computing time.
Open AccessMechanical Deformation Analysis of a Flexible Finger in Terms of an Improved ANCF Plate Element
In recent years, flexible continuum robots have been substantially developed. Absolute nodal coordinates formulation (ANCF) gives a feasible path for simulating the behavior of flexible robots. However, the model of finger-shaped robots is often regarded as a cylinder and characterized by a beam element. Obviously, this is short of characterizing the geometrical feature of fingers in detail, especially under bending conditions. Additionally, for the lower-order plate element, it is hard to characterize the bending behavior of the flexible finger due to fewer nodes; a higher-order plate element often requires an extremely long computing time. In this work, an improved ANCF lower-order plate element is used to increase the accuracy of the Yeoh model and characterize the geometrical structure of silicone rubber fingers, taking into particular consideration the effect of volume locks and multi-body system constraints. Since it is a kind of lower-order plate element, essentially, the computing time is nearly the same as that of conventional lower-order plate elements. The validity of this model was verified by comparing it with the results of the published reference. The flexible finger, manufactured using silicone rubber, is characterized by the novel ANCF lower-order plate element, whereby its mechanical deformation and bending behavior are simulated both efficiently and accurately. Compared to the ANCF beam element, conventional lower-order plate element, and higher-order plate element, the novel plate element in this paper characterizes the external contour of the finger better, reflects bending behavior more realistically, and converges in less computing time.
- 13 December 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 232 (4) , 639-656
Mechanical analysis of spherical roller bearings due to surface waviness
This work presents a theoretical model to research the vibration due to surface waviness of spherical roller bearings (SRBs), taking account of the self-aligning feature and the external axial load. The surface waviness is described by cosinoidal functions. The self-aligning features, including the variation law of the self-aligning contact angle and the interaction with the external loads, are introduced into the non-Hertzian contact model. The nonlinear equations are solved by Runge–Kutta method and the proposed model is validated by comparing with the results of the published references. The results show more characteristic frequencies will be excited under the self-aligning operating condition, whereby the improved equations proposed in this paper are recommended to instead of the previous ones to predict characteristic frequencies of the waviness vibration in an SRB. In addition, these characteristic vibrations caused by waviness are obviously influenced by the magnitude and the direction of the self-aligning contact angle. A proper pretightening load should be chosen according to the self-aligning feature or else it will lead to hidden dangers. The radial clearance and the waviness amplitude can both highlight the effect of waviness. And the vibration caused by a larger radial clearance may be fiercer than the vibration due to waviness.
- 13 December 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 232 (4) , 639-656
Mechanical analysis of spherical roller bearings due to surface waviness
This work presents a theoretical model to research the vibration due to surface waviness of spherical roller bearings (SRBs), taking account of the self-aligning feature and the external axial load. The surface waviness is described by cosinoidal functions. The self-aligning features, including the variation law of the self-aligning contact angle and the interaction with the external loads, are introduced into the non-Hertzian contact model. The nonlinear equations are solved by Runge–Kutta method and the proposed model is validated by comparing with the results of the published references. The results show more characteristic frequencies will be excited under the self-aligning operating condition, whereby the improved equations proposed in this paper are recommended to instead of the previous ones to predict characteristic frequencies of the waviness vibration in an SRB. In addition, these characteristic vibrations caused by waviness are obviously influenced by the magnitude and the direction of the self-aligning contact angle. A proper pretightening load should be chosen according to the self-aligning feature or else it will lead to hidden dangers. The radial clearance and the waviness amplitude can both highlight the effect of waviness. And the vibration caused by a larger radial clearance may be fiercer than the vibration due to waviness.
- 4 April 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 231 (17) , 3250-3262
Mechanical analysis of spherical roller bearings due to misalignments between inner and outer rings
This research presents a theoretical model to analyze the mechanical performance of spherical roller bearings, taking account of the angular and centroidal misalignments between the inner and outer rings. The angular misalignment can be improved by spherical roller bearings self-aligning feature to a certain degree. The interpolation method is used to determine the self-aligning contact angles of the different rollers. The centroidal misalignment is described by the angular and distance deviations. Non-Hertzian contact theory is applied to model and calculate the rollers load-distribution and total contact angles as well as the displacement of the inner ring. The loads of the rollers with the misalignments features and the external loads are included in the equilibrium equations, which is solved by Newton-Raphson method. This research shows spherical roller bearings self-aligning ability can balance the additional bending moment caused by the angular misalignment, which is at the cost of reducing its carrying capacity. But this carrying capacity will be improved to a certain degree by a proper axial load. It also illustrates that any kinds of centroidal misalignments are harmful for the service life of bearings. But the location of the misalignments can be roughly inferred by the external loads and the displacement of the inner ring, which is helpful for spherical roller bearings fault diagnose and elimination.
- 4 April 2016
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 231 (17) , 3250-3262
Mechanical analysis of spherical roller bearings due to misalignments between inner and outer rings
This research presents a theoretical model to analyze the mechanical performance of spherical roller bearings, taking account of the angular and centroidal misalignments between the inner and outer rings. The angular misalignment can be improved by spherical roller bearings self-aligning feature to a certain degree. The interpolation method is used to determine the self-aligning contact angles of the different rollers. The centroidal misalignment is described by the angular and distance deviations. Non-Hertzian contact theory is applied to model and calculate the rollers load-distribution and total contact angles as well as the displacement of the inner ring. The loads of the rollers with the misalignments features and the external loads are included in the equilibrium equations, which is solved by Newton-Raphson method. This research shows spherical roller bearings self-aligning ability can balance the additional bending moment caused by the angular misalignment, which is at the cost of reducing its carrying capacity. But this carrying capacity will be improved to a certain degree by a proper axial load. It also illustrates that any kinds of centroidal misalignments are harmful for the service life of bearings. But the location of the misalignments can be roughly inferred by the external loads and the displacement of the inner ring, which is helpful for spherical roller bearings fault diagnose and elimination.