Will Hettel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Will Hettel has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
D. Carlson
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
5 shared publicationsM. Hemmer
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
5 shared publicationsD. Morrill
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
4 shared publicationsG. Golba
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
4 shared publicationsH. Kapteyn
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
4 shared publicationsM. Murnane
Department of Physics, JILA & STROBE NSF Science & Technology Center, University of Colorado & NIST, Boulder, Colorado, USA
4 shared publications
Latest Publications
- Open Access
High-Resolution Broadband Ptychography with an EUV Continuum
Ptychography implemented with coherent high-harmonic (HHG) sources enables high-resolution, high-fidelity imaging of nanostructures and biosystems. However, when driven by mid-infrared lasers to generate light at higher photon energies, HHG inherently produces a broadband quasi-continuum, which is less suited for coherent imaging compared with a single harmonic order. Consequently, experiments typically select a narrow bandwidth of ≈1%, leaving most of the HHG photons unused, increasing exposure times. In this work, we demonstrate broadband ptychography utilizing an extreme UV (EUV) continuum centered at 92 eV, with a bandwidth of up to 7.9 eV (a relative bandwidth of ~9%). By focusing the HHG beam to a sub-micrometer spot size to relax the temporal coherence constraints, and utilizing a multi-wavelength ptychographic reconstruction algorithm, we achieve a spatial resolution of 42 nm, which is near the diffraction limit of ~30 nm for our setup. To the best of our knowledge, this represents the broadest spectral bandwidth successfully employed to date for EUV ptychography, with the potential to increase the usable photon flux by up to an order of magnitude relative to previous approaches. In the future, broadband soft X-ray ptychography can be used to image hydrated samples around the carbon K-edge and magnetic textures at the L-edges of transition metals.
Open AccessHigh-Resolution Broadband Ptychography with an EUV Continuum
Ptychography implemented with coherent high-harmonic (HHG) sources enables high-resolution, high-fidelity imaging of nanostructures and biosystems. However, when driven by mid-infrared lasers to generate light at higher photon energies, HHG inherently produces a broadband quasi-continuum, which is less suited for coherent imaging compared with a single harmonic order. Consequently, experiments typically select a narrow bandwidth of ≈1%, leaving most of the HHG photons unused, increasing exposure times. In this work, we demonstrate broadband ptychography utilizing an extreme UV (EUV) continuum centered at 92 eV, with a bandwidth of up to 7.9 eV (a relative bandwidth of ~9%). By focusing the HHG beam to a sub-micrometer spot size to relax the temporal coherence constraints, and utilizing a multi-wavelength ptychographic reconstruction algorithm, we achieve a spatial resolution of 42 nm, which is near the diffraction limit of ~30 nm for our setup. To the best of our knowledge, this represents the broadest spectral bandwidth successfully employed to date for EUV ptychography, with the potential to increase the usable photon flux by up to an order of magnitude relative to previous approaches. In the future, broadband soft X-ray ptychography can be used to image hydrated samples around the carbon K-edge and magnetic textures at the L-edges of transition metals.
- Open Access
- 1 November 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (11)
Soft x-ray high-harmonic generation in an anti-resonant hollow core fiber driven by a 3 μ m ultrafast laser
High-harmonic upconversion driven by a mid-infrared femtosecond laser can generate coherent soft x-ray beams in a tabletop-scale setup. Here, we report on a compact ytterbium-pumped optical parametric chirped pulse amplifier (OPCPA) laser system seeded by an all-fiber front-end and employing periodically poled lithium niobate (PPLN) nonlinear media operated near the pulse fluence limits of current commercially available PPLN crystals. The OPCPA delivers 3 µm wavelength pulses with 775 µJ energy at 1 kHz repetition rate, with transform-limited 120 fs pulse duration, diffraction-limited beam quality, and ultrahigh 0.33% rms energy stability over >18 h. Using this laser, we generate soft x-ray high harmonics (HHG) in argon gas by focusing into a low-loss, high-pressure gas-filled anti-resonant hollow core fiber (ARHCF), generating coherent light at photon energies up to the argon L-edge (250 eV) and carbon K-edge (284 eV), with high beam quality and ∼1% rms energy stability. This work demonstrates soft x-ray HHG in a high-efficiency guided-wave phase matched geometry, overcoming the high losses inherent to mid-IR propagation in unstructured waveguides, or the short interaction lengths of gas cells or jets. The ARHCF can operate in the long term without damage and with the repetition rate, stability, and robustness required for demanding applications in spectromicroscopy and imaging. Finally, we discuss routes for further optimizing the soft x-ray HHG flux by driving He at higher laser intensities using either the signal (1.5 μm) or idler wavelengths (3 μm).
- 1 November 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (11)
Open AccessSoft x-ray high-harmonic generation in an anti-resonant hollow core fiber driven by a 3 μ m ultrafast laser
High-harmonic upconversion driven by a mid-infrared femtosecond laser can generate coherent soft x-ray beams in a tabletop-scale setup. Here, we report on a compact ytterbium-pumped optical parametric chirped pulse amplifier (OPCPA) laser system seeded by an all-fiber front-end and employing periodically poled lithium niobate (PPLN) nonlinear media operated near the pulse fluence limits of current commercially available PPLN crystals. The OPCPA delivers 3 µm wavelength pulses with 775 µJ energy at 1 kHz repetition rate, with transform-limited 120 fs pulse duration, diffraction-limited beam quality, and ultrahigh 0.33% rms energy stability over >18 h. Using this laser, we generate soft x-ray high harmonics (HHG) in argon gas by focusing into a low-loss, high-pressure gas-filled anti-resonant hollow core fiber (ARHCF), generating coherent light at photon energies up to the argon L-edge (250 eV) and carbon K-edge (284 eV), with high beam quality and ∼1% rms energy stability. This work demonstrates soft x-ray HHG in a high-efficiency guided-wave phase matched geometry, overcoming the high losses inherent to mid-IR propagation in unstructured waveguides, or the short interaction lengths of gas cells or jets. The ARHCF can operate in the long term without damage and with the repetition rate, stability, and robustness required for demanding applications in spectromicroscopy and imaging. Finally, we discuss routes for further optimizing the soft x-ray HHG flux by driving He at higher laser intensities using either the signal (1.5 μm) or idler wavelengths (3 μm).
- 14 August 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (16) , 5145-5148
Few-cycle self-compression of GW mid-IR pulses in an anti-resonant fiber in ambient air
We report self-compression of mid-IR optical pulses to the few-cycle regime in an anti-resonant hollow core fiber filled with ambient air. Transform-limited 120-fs duration input optical pulses with 160 μJ energy are compressed to 29.8 fs (< 3 cycles) with a compression efficiency of 75%, resulting in 2.6 GW peak power few-cycle pulses. In addition, we show that nonlinear compression is maintained when the fiber is coiled, allowing for a compact setup. Finally, we elucidate the dynamics involved in this self-compression setup via numerical simulations and identify the critical role played by Raman shifting in molecular gases and ionization limitations.
- 14 August 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (16) , 5145-5148
Few-cycle self-compression of GW mid-IR pulses in an anti-resonant fiber in ambient air
We report self-compression of mid-IR optical pulses to the few-cycle regime in an anti-resonant hollow core fiber filled with ambient air. Transform-limited 120-fs duration input optical pulses with 160 μJ energy are compressed to 29.8 fs (< 3 cycles) with a compression efficiency of 75%, resulting in 2.6 GW peak power few-cycle pulses. In addition, we show that nonlinear compression is maintained when the fiber is coiled, allowing for a compact setup. Finally, we elucidate the dynamics involved in this self-compression setup via numerical simulations and identify the critical role played by Raman shifting in molecular gases and ionization limitations.
- 1 January 2025
- Published by Optica Publishing Group
- p. PD101_6
Soft X-ray Diffraction at 6.7 nm with a Tabletop High Harmonic Source
We report the development and use of a long-term stable tabletop coherent soft X-ray source for coherent diffraction measurements at 6.7 nm wavelength. This light source can enable widespread applications in scatterometry and imaging.
- 1 January 2025
- Published by Optica Publishing Group
- p. PD101_6
Soft X-ray Diffraction at 6.7 nm with a Tabletop High Harmonic Source
We report the development and use of a long-term stable tabletop coherent soft X-ray source for coherent diffraction measurements at 6.7 nm wavelength. This light source can enable widespread applications in scatterometry and imaging.
- 1 January 2024
- Published by Optica Publishing Group
- p. FM1E.2
3 µm Driven High Harmonic Generation in an Anti-Resonant Hollow Core Fiber
We report the generation of high harmonics in an anti-resonant hollow-core fiber driven by an ultrastable ~0.3% RMS, kHz laser at 3 µm wavelength. This geometry enables lower-loss guiding of mid-IR lasers.
- 1 January 2024
- Published by Optica Publishing Group
- p. FM1E.2
3 µm Driven High Harmonic Generation in an Anti-Resonant Hollow Core Fiber
We report the generation of high harmonics in an anti-resonant hollow-core fiber driven by an ultrastable ~0.3% RMS, kHz laser at 3 µm wavelength. This geometry enables lower-loss guiding of mid-IR lasers.
- 1 January 2024
- Published by Optica Publishing Group
- p. JTu5A.6
Novel pump architecture for high average power optical parametric amplifiers at 1.5 μm wavelength
We report our progress developing a high average power ultrafast OPCPA at 1.5-μm pumped by a multi-channel Yb-fiber laser. The pump laser delivers 200-μJ, 250-fs pulses at 1-MHz repetition rate and parametric amplification was demonstrated.
- 1 January 2024
- Published by Optica Publishing Group
- p. JTu5A.6
Novel pump architecture for high average power optical parametric amplifiers at 1.5 μm wavelength
We report our progress developing a high average power ultrafast OPCPA at 1.5-μm pumped by a multi-channel Yb-fiber laser. The pump laser delivers 200-μJ, 250-fs pulses at 1-MHz repetition rate and parametric amplification was demonstrated.
- 1 January 2023
- Published by Optica Publishing Group
- p. AM6A.6
Compact Ultrastable Seed Laser for Mid-IR OPCPA
We present a fiber-based laser delivering synchronized pulses at 2 μm and 3 μm wavelengths to seed an OPCPA system. The simple architecture provides robust, stable mid-IR light for amplification to generate SXR high harmonics.
- 1 January 2023
- Published by Optica Publishing Group
- p. AM6A.6
Compact Ultrastable Seed Laser for Mid-IR OPCPA
We present a fiber-based laser delivering synchronized pulses at 2 μm and 3 μm wavelengths to seed an OPCPA system. The simple architecture provides robust, stable mid-IR light for amplification to generate SXR high harmonics.
- 1 January 2022
- Published by Optica Publishing Group
- p. MW3C.5
Dispersion Compensation in a 3 μm Wavelength OPCPA System by Shaping the 1.5 μm Signal Input
We report on phase and intensity pulse shaping of the 1.5-μm signal beam of a 3-μm wavelength OPCPA system. This shaper and associated algorithms enable in-situ optimization of nonlinear processes driven at mid-IR wavelengths.
- 1 January 2022
- Published by Optica Publishing Group
- p. MW3C.5
Dispersion Compensation in a 3 μm Wavelength OPCPA System by Shaping the 1.5 μm Signal Input
We report on phase and intensity pulse shaping of the 1.5-μm signal beam of a 3-μm wavelength OPCPA system. This shaper and associated algorithms enable in-situ optimization of nonlinear processes driven at mid-IR wavelengths.