Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Andrius Kriščiūnas has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Reconstructing Shallow River Bathymetry Through Sequence-Based Modeling Approach

    by Modestas Butnorius, Timas Akelis, Matas Vaitkevičius, Dominykas Matulis, Andrius Kriščiūnas, Vytautas Akstinas, Rimantas Barauskas

    Hydrological monitoring is crucial for protecting aquatic ecosystems, especially downstream of hydropower plants where water levels can change suddenly and cause the degradation of instream habitats. There are lot of traditional methods used to monitor water levels and river bathymetry, but most of them rely on in situ measurements. Drone-based remote sensing has received more attention in recent years, with the data in turn processed using CNNs. In this paper, we propose a new sequence-based method that uses multiple frames to expand the available context and compare it to already existing methods, such as Lyzenga, Stumpf, CNN, and SfM. The best performing models within this study end up being SfM and CNN, with the former being more accurate on rivers with clean riverbeds and the latter being the most consistent. The sequence-based model shows promise, and even outperforms CNN, in terms of MAE, on rivers where the same location across multiple views is mapped, achieving the most accurate results across different images. This shows that utilizing multiple views to increase the available context can improve the accuracy of riverine depth estimation based on multispectral visual information.

  • Open Access

    UAV-Based River Velocity Estimation Using Optical Flow and FEM-Supported Multiframe RAFT Extension

    by Andrius Kriščiūnas, Vytautas Akstinas, Dalia Čalnerytė, Diana Meilutytė-Lukauskienė, Karolina Gurjazkaitė, Tautvydas Fyleris, Rimantas Barauskas

    Quantifying river surface flow velocity is essential for hydrodynamic modelling, flood forecasting, and water resource management. Traditional in situ methods provide accurate point measurements but are costly and limited in spatial coverage. Unmanned aerial vehicles (UAVs) offer a flexible, non-contact alternative for high-resolution monitoring. Optical flow is a tracer-independent technique for deriving velocity fields from RGB video, making it well suited to UAV-based surveys. However, its operational use is hindered by the limited availability of annotated datasets and by instability under low-texture or noisy conditions. This study combines a Finite element method (FEM)-based physical flow model with UAV video to generate reference datasets and introduces a modified Recurrent All-Pairs Field Transforms (RAFT) architecture based on multiframe sequences. A Gated Recurrent Unit fusion module (Fuse-GRU) is incorporated prior to correlation computation, improving robustness to illumination changes and surface homogeneity while maintaining computational efficiency. The proposed model delivers stable, physically consistent velocity estimates across multiple rivers and flow conditions. Accuracy improves with higher spatial resolution and moderate temporal spacing. Compared to field measurements, the average angular difference ranged from 8 to 15°. The high error values were mainly caused by inaccuracies in the physical model and by complex river features. These findings confirm that multiframe optical flow can reproduce realistic river flow patterns with accuracy comparable to physically-based simulations, thereby supporting UAV-based hydrometric monitoring and model validation.


  • Open Access

    Suitability of UAV-Based RGB and Multispectral Photogrammetry for Riverbed Topography in Hydrodynamic Modelling

    by Vytautas Akstinas, Karolina Gurjazkaitė, Diana Meilutytė-Lukauskienė, Andrius Kriščiūnas, Dalia Čalnerytė, Rimantas Barauskas

    This study assesses the suitability of UAV aerial imagery-based photogrammetry for reconstructing underwater riverbed topography and its application in two-dimensional (2D) hydrodynamic modelling, with a particular focus on comparing RGB, multispectral, and fused RGB–multispectral imagery. Four Lithuanian rivers—Verknė, Šušvė, Jūra, and Mūša—were selected to represent a wide range of hydromorphological and hydraulic conditions, including variations in bed texture, vegetation cover, and channel complexity. High-resolution digital elevation models (DEMs) were generated from field-based surveys and UAV imagery processed using Structure-from-Motion photogrammetry. Two-dimensional hydrodynamic models were created and calibrated in HEC-RAS 6.5 using measurement-based DEMs and subsequently applied using photogrammetry-derived DEMs to isolate the influence of terrain input on model performance. The results showed that UAV-derived DEMs systematically overestimate riverbed elevation, particularly in deeper or vegetated sections, resulting in underestimated water depths. RGB imagery provided greater spatial detail but was more susceptible to local anomalies, whereas multispectral imagery produced smoother surfaces with a stronger positive elevation bias. The fusion of RGB and multispectral imagery consistently reduced spatial noise and improved hydrodynamic simulation performance across all river types. Despite moderate vertical deviations of 0.10–0.25 m, relative flow patterns and velocity distributions were reproduced with acceptable accuracy. The findings demonstrate that combined spectral UAV aerial imagery in photogrammetry is a robust and cost-effective alternative for hydrodynamic modelling in shallow lowland rivers, particularly where relative hydraulic characteristics are of primary interest.


  • Open Access

    A Framework for Autonomous UAV Navigation Based on Monocular Depth Estimation

    by Jonas Gaigalas, Linas Perkauskas, Henrikas Gricius, Tomas Kanapickas, Andrius Kriščiūnas

    UAVs are vastly used in practical applications such as reconnaissance and search and rescue or other missions which typically require experienced operators. Autonomous drone navigation could aid in situations where the environment is unknown, GPS or radio signals are unavailable, and there are no existing 3D models to preplan a trajectory. Traditional navigation methods employ multiple sensors: LiDAR, sonar, inertial measurement units (IMUs), and cameras. This increases the weight and cost of such drones. This work focuses on autonomous drone navigation from point A to point B using visual information obtained from a monocular camera in a simulator. The solution utilizes a depth image estimation model to create an occupancy grid map of the surrounding area and uses an A* path planning algorithm to find optimal paths to end goals while navigating around the obstacles. The simulation is conducted using AirSim in Unreal Engine. With this work, we propose a framework and scenarios in three different open-source virtual environments, varying in complexity, to test and compare autonomous UAV navigation methods based on vision. In this study, fine-tuned models using synthetic RGB and depth image data were used for each environment, demonstrating a noticeable improvement in depth estimation accuracy, with reductions in Mean Absolute Percentage Error (MAPE) from 120.45% to 33.41% in AirSimNH, from 70.09% to 8.04% in Blocks, and from 121.94% to 32.86% in MSBuild2018. While the proposed UAV autonomous navigation framework utilizing depth images directly from AirSim achieves 38.89%, 87.78%, and 13.33% success rates of reaching goals in AirSimNH, Blocks, and MSBuild2018 environments, respectively, the method with pre-trained depth estimation models fails to reach any end points of the scenarios. The fine-tuned depth estimation models enhance performance, increasing the number of reached goals by 3.33% for AirSimNH and 72.22% for Blocks. These findings highlight the benefits of adapting vision-based models to specific environments, improving UAV autonomy in visually guided navigation tasks.


  • Open Access

    Continuous Satellite Image Generation from Standard Layer Maps Using Conditional Generative Adversarial Networks

    by Arminas Šidlauskas, Andrius Kriščiūnas, Dalia Čalnerytė

    Satellite image generation has a wide range of applications. For example, parts of images must be restored in areas obscured by clouds or cloud shadows or areas that must be anonymized. The need to cover a large area with the generated images faces the challenge that separately generated images must maintain the structural and color continuity between the adjacent generated images as well as the actual ones. This study presents a modified architecture of the generative adversarial network (GAN) pix2pix that ensures the integrity of the generated remote sensing images. The pix2pix model comprises a U-Net generator and a PatchGAN discriminator. The generator was modified by expanding the input set with images representing the known parts of ground truth and the respective mask. Data used for the generative model consist of Sentinel-2 (S2) RGB satellite imagery as the target data and OpenStreetMap mapping data as the input. Since forested areas and fields dominate in images, a Kneedle clusterization method was applied to create datasets that better represent the other classes, such as buildings and roads. The original and updated models were trained on different datasets and their results were evaluated using gradient magnitude (GM), Fréchet inception distance (FID), structural similarity index measure (SSIM), and multiscale structural similarity index measure (MS-SSIM) metrics. The models with the updated architecture show improvement in gradient magnitude, SSIM, and MS-SSIM values for all datasets. The average GMs of the junction region and the full image are similar (do not exceed 7%) for the images generated using the modified architecture whereas it is more than 13% higher in the junction area for the images generated using the original architecture. The importance of class balancing is demonstrated by the fact that, for both architectures, models trained on the dataset with a higher ratio of classes representing buildings and roads compared to the models trained on the dataset without clusterization have more than 10% lower FID (162.673 to 190.036 for pix2pix and 173.408 to 195.621 for the modified architecture) and more than 5% higher SSIM (0.3532 to 0.3284 for pix2pix and 0.3575 to 0.3345 for the modified architecture) and MS-SSIM (0.3532 to 0.3284 for pix2pix and 0.3575 to 0.3345 for the modified architecture) values.


  • Open Access

    Convolutional Neural Network-Based Approximation of Coverage Path Planning Results for Parking Lots

    by Andrius Kriščiūnas, Dalia Čalnerytė, Tautvydas Fyleris, Tadas Jurgutis, Dalius Makackas, Rimantas Barauskas

    Parking lots have wide variety of shapes because of surrounding environment and the objects inside the parking lot, such as trees, manholes, etc. In the case of paving the parking lot, as much area as possible should be covered by the construction vehicle to reduce the need for manual workforce. Thus, the coverage path planning (CPP) problem is formulated. The CPP of the parking lots is a complex problem with constraints regarding various issues, such as dimensions of the construction vehicle and data processing time and resources. A strategy based on convolutional neural networks (CNNs) for the fast estimation of the CPP’s average track length, standard deviation of track lengths, and number of tracks was suggested in this article. Two datasets of different complexity were generated to analyze the suggested approach. The first case represented a simple case with a working polygon constructed out of several rectangles with applied shear and rotation transformations. The second case represented a complex geometry generated out of rectangles and ellipses, narrow construction area, and obstacles. The results were compared with the linear regression models, with the area of the working polygon as an input. For both generated datasets, the strategy to use an approximator to estimate outcomes led to more accurate results compared to the respective linear regression models. The suggested approach enables us to have rough estimates of a large number of geometries in a short period of time and organize the working process, for example, planning construction time and price, choosing the best decomposition of the working polygon, etc.


  • Open Access

    Application of Information-Sharing for Resilient and Sustainable Food Delivery in Last-Mile Logistics

    by Valentas Gruzauskas, Aurelija Burinskiene, Andrius Krisciunas

    The growing food demand, the tendency for organic food, and the adaptation of the e-commerce business model require new food supply chain management approaches. On the one hand, 30% of the world’s produced food is wasted, and CO2 emissions are rapidly growing due to transport. On the other hand, the increasingly complex and dynamic environment is decreasing the effectiveness of food supply chains. Because of these trends, sustainability and resilience are becoming more relevant to food supply chains. Therefore, the objective of this paper is to propose a strategy based on information exchange to improve food quality and decrease the level of CO2 emission in last-mile deliveries of food products. To achieve this goal, an agent-based model of last-mile deliveries was developed. The model simulated traffic flow and traffic accidents as disturbances in the system while measuring the level of CO2 emission and food quality of the network. The simulation compares information sharing between all vehicles in the urban area and without information sharing in four scenarios of the food industry. In practice, information sharing is achieved by using connected vehicle technology. The use of information sharing between vehicles in last-mile delivery processes allows the development of a self-organizing system, which would adapt to disturbances and lead to the development of sustainability in the long run.


  • Open Access

    Determination of River Hydromorphological Features in Low-Land Rivers from Aerial Imagery and Direct Measurements Using Machine Learning Algorithms

    by Vytautas Akstinas, Andrius Kriščiūnas, Arminas Šidlauskas, Dalia Čalnerytė, Diana Meilutytė-Lukauskienė, Darius Jakimavičius, Tautvydas Fyleris, Serhii Nazarenko, Rimantas Barauskas

    Hydromorphology of rivers assessed through direct measurements is a time-consuming and relatively expensive procedure. The rapid development of unmanned aerial vehicles and machine learning (ML) technologies enables the usage of aerial images to determine hydromorphological units (HMUs) automatically. The application of various direct and indirect data sources and their combinations for the determination of river HMUs from aerial images was the main aim of this research. Aerial images with and without the Sobel filter, a layer of boulders identified using Yolov5x6, and a layer of direct measurements of depth and streamflow velocity were used as data sources. Three ML models were constructed for the cases if one, two, or three data sources were used. The ML models for HMU segmentation were constructed of MobileNetV2 pre-trained on ImageNet data for the feature extraction part and U-net for the segmentation part. The stratified K-fold cross-validation with five folds was carried out to evaluate the performance of the model due to the limited dataset. The analysis of the ML results showed that the measured metrics of segmentation using direct measurements were close to the ones of the model trained only on the combination of boulder layer and aerial images with the Sobel filter. The obtained results demonstrated the potential of the applied approach for the determination of HMUs only from the aerial images, and provided a basis for further development to increase its accuracy.