Chen Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chen Yang has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Juan Du
Digital Twin Research Center, Institute of Engineering Thermophysics, Chinese Academy of Sciences 1 , Beijing 100190
3 shared publications Chaoqun Nie
Advanced Gas Turbine Laboratory, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China
1 shared publication- Dun Ba
University of Chinese Academy of Sciences Advanced Gas Turbine Laboratory, Institute of Engineering Thermophysics, Chinese Academy of Sciences No. 11, Beisihuanxi Road, Beijing 100190
1 shared publication Hongwu Zhang
Advanced Gas Turbine Laboratory, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing, China
1 shared publication- Hongwu Zhang
Advanced Gas Turbine Laboratory, Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China
1 shared publication - Hu Wu
School of Power and Energy, Northwestern Polytechnical University, Xi’an 710129, China
1 shared publication
Latest Publications
- 29 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (5) , 1-68
Integrated Design of Axial Slot Casing Treatment and Blades in a Low-Speed Single Stage Axial Compressor
Casing treatment has been used to enhance the stability of axial-flow compressor by extending the stall margin; it also induces strong interaction with compressor blades, as demonstrated in the open literature. Revealing the mechanism of this interaction is a key to fully exploit the potential of the stability-enhancing capability of casing treatment without efficiency penalty. For this purpose, an integrated optimization design of rotor and axial slot casing treatment is implemented for a low-speed axial-flow compressor, and the stall margin is increased by 10.89% without penalty on the peak efficiency. Through detailed analysis, two important driving factors for the improvement of stall margin are illustrated: the suction effect that decreases the axial momentum of tip leakage flow, and the injection effect that increases the axial momentum of main flow. Meanwhile, it is found that the combination of forward-deflection axial slot casing treatment and forward-sweep rotor can maximize the enhancement of the momentum exchange, thereby adequately reducing the blockage region induced by tip leakage flow. More specially, the stator is then redesigned based on the matching mechanism between the stator and rotor with axial slot casing treatment in a stage. This redesign can considerably reduce entropy generation and flow separation in the passage and achieve an improvement of 0.87% in efficiency. The results hence demonstrate the superiority of integrated design of axial slot casing treatment and blades in improving both stall margin and efficiency.
- 29 January 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 146 (5) , 1-68
Integrated Design of Axial Slot Casing Treatment and Blades in a Low-Speed Single Stage Axial Compressor
Casing treatment has been used to enhance the stability of axial-flow compressor by extending the stall margin; it also induces strong interaction with compressor blades, as demonstrated in the open literature. Revealing the mechanism of this interaction is a key to fully exploit the potential of the stability-enhancing capability of casing treatment without efficiency penalty. For this purpose, an integrated optimization design of rotor and axial slot casing treatment is implemented for a low-speed axial-flow compressor, and the stall margin is increased by 10.89% without penalty on the peak efficiency. Through detailed analysis, two important driving factors for the improvement of stall margin are illustrated: the suction effect that decreases the axial momentum of tip leakage flow, and the injection effect that increases the axial momentum of main flow. Meanwhile, it is found that the combination of forward-deflection axial slot casing treatment and forward-sweep rotor can maximize the enhancement of the momentum exchange, thereby adequately reducing the blockage region induced by tip leakage flow. More specially, the stator is then redesigned based on the matching mechanism between the stator and rotor with axial slot casing treatment in a stage. This redesign can considerably reduce entropy generation and flow separation in the passage and achieve an improvement of 0.87% in efficiency. The results hence demonstrate the superiority of integrated design of axial slot casing treatment and blades in improving both stall margin and efficiency.
- 6 February 2023
- Published by Springer Nature in Journal of Thermal Science
- Vol. 32 (2) , 770-785
Hybrid Slot-Groove Casing Treatment for Stall Margin Improvement on an Axial Flow Compressor with Circumferential Total Pressure Distortion
- 6 February 2023
- Published by Springer Nature in Journal of Thermal Science
- Vol. 32 (2) , 770-785
Hybrid Slot-Groove Casing Treatment for Stall Margin Improvement on an Axial Flow Compressor with Circumferential Total Pressure Distortion
- Open Access
- 29 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (13) , 6576
Time-Marching Throughflow Analysis of Centrifugal Compressors with Boundary Conditions Based on Newton’s Method
The meridional distribution of the flow parameters inside the centrifugal compressor is of great importance to its overall performance, as well as its matching performance under a thermal cycle. A time-marching throughflow method for the off-design performance analysis of the centrifugal compressor is described. The method is based on the strictly conservative throughflow-governing equations, and an improved method of boundary-condition enforcement is developed based on Newton’s method to achieve a robust and fast throughflow simulation. An inviscid blade force model was adopted to obtain the flow deflection inside the blade passage. Empirical loss models were integrated into the throughflow model to simulate the viscous force effects in the real three-dimensional flow. Two test cases are presented to validate the throughflow method by comparisons with the experimental data or CFD results, including the NASA low-speed centrifugal compressor (LSCC) and the Allison high-performance centrifugal compressor (HPCC). The simulation indicated that the developed enforcement method for the inlet and outlet boundary conditions significantly improves the computational robustness. For both the LSCC and HPCC cases, reasonable flow-parameter distribution was obtained and accurate overall characteristics were also predicted under the off-design conditions. The results indicated that the developed time-marching throughflow method is effective and efficient for the performance analysis of centrifugal compressors.
- 29 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (13) , 6576
Open AccessTime-Marching Throughflow Analysis of Centrifugal Compressors with Boundary Conditions Based on Newton’s Method
The meridional distribution of the flow parameters inside the centrifugal compressor is of great importance to its overall performance, as well as its matching performance under a thermal cycle. A time-marching throughflow method for the off-design performance analysis of the centrifugal compressor is described. The method is based on the strictly conservative throughflow-governing equations, and an improved method of boundary-condition enforcement is developed based on Newton’s method to achieve a robust and fast throughflow simulation. An inviscid blade force model was adopted to obtain the flow deflection inside the blade passage. Empirical loss models were integrated into the throughflow model to simulate the viscous force effects in the real three-dimensional flow. Two test cases are presented to validate the throughflow method by comparisons with the experimental data or CFD results, including the NASA low-speed centrifugal compressor (LSCC) and the Allison high-performance centrifugal compressor (HPCC). The simulation indicated that the developed enforcement method for the inlet and outlet boundary conditions significantly improves the computational robustness. For both the LSCC and HPCC cases, reasonable flow-parameter distribution was obtained and accurate overall characteristics were also predicted under the off-design conditions. The results indicated that the developed time-marching throughflow method is effective and efficient for the performance analysis of centrifugal compressors.