Ankit Kumar Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ankit Kumar Gupta has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Puneet Tandon
DeLOGIC Lab, Discipline of Mechanical Engineering, PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, India
7 shared publications - Harshal Y. Shahare
DeLOGIC Lab, Mechanical Engineering Discipline, PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, Madhya Pradesh, India
3 shared publications - Alexander Pesin
Laboratory of Mechanics of Gradient Nanomaterials, Nosov Magnitogorsk State Technical University, Magnitogorsk 455000, Russia
2 shared publications - Aniket Nagargoje
DeLOGIC Lab, Mechanical Engineering Discipline, Indian Institute of Information Technology Design and Manufacturing, Jabalpur, India
2 shared publications - Denis Pustovoytov
Nosov Magnitogorsk State Technical University
2 shared publications - Gangaram Mandaloi
Department of Mechanical Engineering, Rewa Engineering College, Rewa, Madhya Pradesh, India
2 shared publications
Latest Publications
- 2 January 2026
- Published by Springer Nature
- p. 231-240
Effect of Process Parameters on Surface Quality During Incremental Forming of Thin Sheets of Inconel 625
- 2 January 2026
- Published by Springer Nature
- p. 231-240
Effect of Process Parameters on Surface Quality During Incremental Forming of Thin Sheets of Inconel 625
- 9 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 240 (9) , 1524-1536
Impact of continuous lubricating roller-ball tool on forming characteristics in incremental sheet forming with heat-assistance
Heat-assisted incremental sheet forming (Ha-ISF) enhances formability and enables the creation of intricate structures. Major challenges in incremental sheet forming (ISF) are achieving a good surface finish, maintaining geometrical accuracy, minimizing tool wear, and optimal energy consumption. The present research investigates the performance of continuous lubrication with a roller-ball tool in ISF and Ha-ISF, comparing its effectiveness with a conventional tool. The work also examines the effect on pre-heat-treated sheets at 290 °C. The primary focus was on assessing the impact of continuous lubrication on formability, surface quality, and geometrical accuracy throughout the forming process. The continuous lubricating rolling-ball tip tool (RBT) guarantees a constant flow of lubricant throughout the forming process. Numerous factors, including material flow, forming forces, and tool wear, were examined experimentally for both types of tools. The results show that the continuous lubricating roller ball tool significantly enhances material flow, minimizes surface roughness, and decreases tool wear. About 80% improvement in surface roughness and a 34% decrease in forming forces are reported with RBT in the case of Ha-ISF. Additionally, the lower thickness variation is observed for Ha-ISF with RBT. The present analysis offers valuable insights into enhancing the process capabilities of Ha-ISF, emphasizing the importance of tool design and lubrication methods in achieving superior outcomes.
- 9 October 2025
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
- Vol. 240 (9) , 1524-1536
Impact of continuous lubricating roller-ball tool on forming characteristics in incremental sheet forming with heat-assistance
Heat-assisted incremental sheet forming (Ha-ISF) enhances formability and enables the creation of intricate structures. Major challenges in incremental sheet forming (ISF) are achieving a good surface finish, maintaining geometrical accuracy, minimizing tool wear, and optimal energy consumption. The present research investigates the performance of continuous lubrication with a roller-ball tool in ISF and Ha-ISF, comparing its effectiveness with a conventional tool. The work also examines the effect on pre-heat-treated sheets at 290 °C. The primary focus was on assessing the impact of continuous lubrication on formability, surface quality, and geometrical accuracy throughout the forming process. The continuous lubricating rolling-ball tip tool (RBT) guarantees a constant flow of lubricant throughout the forming process. Numerous factors, including material flow, forming forces, and tool wear, were examined experimentally for both types of tools. The results show that the continuous lubricating roller ball tool significantly enhances material flow, minimizes surface roughness, and decreases tool wear. About 80% improvement in surface roughness and a 34% decrease in forming forces are reported with RBT in the case of Ha-ISF. Additionally, the lower thickness variation is observed for Ha-ISF with RBT. The present analysis offers valuable insights into enhancing the process capabilities of Ha-ISF, emphasizing the importance of tool design and lubrication methods in achieving superior outcomes.
- 3 January 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (17) , 19546-19556
Influence of Temperature and Strain Rate on Formability of Ti6Al4V in Warm Incremental Forming
- 3 January 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (17) , 19546-19556
Influence of Temperature and Strain Rate on Formability of Ti6Al4V in Warm Incremental Forming
- 13 October 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (11) , 1-16
Assessment of response parameters of the bending mode of deformation machining for manufacturing of impeller blades
- 13 October 2022
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 44 (11) , 1-16
Assessment of response parameters of the bending mode of deformation machining for manufacturing of impeller blades
- 28 July 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (12)
Effects of Heat Treatment on the Surface Quality and Improvement in Formability of Deformation Machined Products of Al 6061
Continuous efforts are being made to improve the technology and the process involved in part production to meet the demands of society. Advancements in machining, as well as incremental forming, resulted in the generation of a technology that is capable of manufacturing monolithic components in a single setup. Such hybrid technological development, called deformation machining (DM), has the milling process contributing to thin structure generation and single point incremental forming (SPIF) leading to the desired geometrical deformation. Machining a material block to produce thin structure results in unwanted residual stresses in the workpiece, which hinders the part’s formability during SPIF. In the current research, stress-relieve annealing of aluminum alloy (Al 6061) is done to compensate for these residual stresses. While doing so, the optimum temperature of reheating is identified, at which the strength of the selected material is not significantly compromised. For this, preliminary microstructural investigations are carried out on the machined components at different temperatures, followed by experimental investigations. The force measurement of different samples was done during the experiments for determining the effects of heat treatment. Geometrical observations suggest that heat treatment results in better forming depth and improved forming angle, however, an increase in surface roughness is observed on the heat-treated parts.
- 28 July 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (12)
Effects of Heat Treatment on the Surface Quality and Improvement in Formability of Deformation Machined Products of Al 6061
Continuous efforts are being made to improve the technology and the process involved in part production to meet the demands of society. Advancements in machining, as well as incremental forming, resulted in the generation of a technology that is capable of manufacturing monolithic components in a single setup. Such hybrid technological development, called deformation machining (DM), has the milling process contributing to thin structure generation and single point incremental forming (SPIF) leading to the desired geometrical deformation. Machining a material block to produce thin structure results in unwanted residual stresses in the workpiece, which hinders the part’s formability during SPIF. In the current research, stress-relieve annealing of aluminum alloy (Al 6061) is done to compensate for these residual stresses. While doing so, the optimum temperature of reheating is identified, at which the strength of the selected material is not significantly compromised. For this, preliminary microstructural investigations are carried out on the machined components at different temperatures, followed by experimental investigations. The force measurement of different samples was done during the experiments for determining the effects of heat treatment. Geometrical observations suggest that heat treatment results in better forming depth and improved forming angle, however, an increase in surface roughness is observed on the heat-treated parts.
- 28 June 2022
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 9 (1) , 297-314
Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode
Deformation machining (DM), a hybrid manufacturing process, involves subtractive manufacturing and the incremental forming process. This hybridisation of manufacturing technologies produces monolithic components having complex profiles and reduces raw material wastage. In this work, the influence of different toolpath methods, approaches, and design of the tool on the geometrical features and surface quality of the fin formed through the bending mode of the DM process was investigated for aluminium alloy Al-6061 T6. Different combinations of straight and curved fin toolpath techniques with top-to-bottom and bottom-to-top approaches were investigated to bend the machined fin in the desired shape. Thereafter, different tool profiles were explored with the bottom-to-top approach and curved toolpath strategy. The fabricated fin was 3D scanned to evaluate the geometrical features, and the surface roughness was also measured. The better quality of the formed components in terms of geometrical features and surface roughness was identified with the optimal combination of the tool profile and toolpath strategy, i.e. tool profile T3 has a circular sector and nose radius of 0.5 mm, curved toolpath method, and bottom-to-top approach. This optimal combination was further utilised to analyse the forming forces during the bending mode of the DM process.
- 28 June 2022
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 9 (1) , 297-314
Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode
Deformation machining (DM), a hybrid manufacturing process, involves subtractive manufacturing and the incremental forming process. This hybridisation of manufacturing technologies produces monolithic components having complex profiles and reduces raw material wastage. In this work, the influence of different toolpath methods, approaches, and design of the tool on the geometrical features and surface quality of the fin formed through the bending mode of the DM process was investigated for aluminium alloy Al-6061 T6. Different combinations of straight and curved fin toolpath techniques with top-to-bottom and bottom-to-top approaches were investigated to bend the machined fin in the desired shape. Thereafter, different tool profiles were explored with the bottom-to-top approach and curved toolpath strategy. The fabricated fin was 3D scanned to evaluate the geometrical features, and the surface roughness was also measured. The better quality of the formed components in terms of geometrical features and surface roughness was identified with the optimal combination of the tool profile and toolpath strategy, i.e. tool profile T3 has a circular sector and nose radius of 0.5 mm, curved toolpath method, and bottom-to-top approach. This optimal combination was further utilised to analyse the forming forces during the bending mode of the DM process.
- Open Access
- 22 June 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (11)
A Comprehensive Review on Experimental Conditions, Strategies, Performance, and Applications of Incremental Forming for Deformation Machining
The demand for product customization and flexible manufacturing techniques is growing day by day to meet the rapid changes in customer requirements. The current review presents the developments in the domains of incremental sheet forming (ISF) and deformation machining (DM) strategies to obtain thin monolithic geometries. The study focuses on the literature on room temperature single point incremental forming that can be applied to the DM. Thin structural parts are challenging to produce by machining because they have inadequate static and dynamic stiffness and low thermal stability. Significant research work on the evolution of diverse theories that emerged to address the fundamental mechanisms of ISF and DM processes has been reported in the literature. This paper presents an outline of the significant process and response parameters, experimental strategies, deformation mechanics and fracture behavior, toolpath generation techniques, and processes’ applications. The paper reports the motivation, research directions, existing gaps, and expansion in the domains of DM processes. The paper also outlines the evolution of incremental forming for deformation machining in the context of future critical applications in the domains of biomedical, aerospace, and automotive engineering.
- 22 June 2022
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 144 (11)
Open AccessA Comprehensive Review on Experimental Conditions, Strategies, Performance, and Applications of Incremental Forming for Deformation Machining
The demand for product customization and flexible manufacturing techniques is growing day by day to meet the rapid changes in customer requirements. The current review presents the developments in the domains of incremental sheet forming (ISF) and deformation machining (DM) strategies to obtain thin monolithic geometries. The study focuses on the literature on room temperature single point incremental forming that can be applied to the DM. Thin structural parts are challenging to produce by machining because they have inadequate static and dynamic stiffness and low thermal stability. Significant research work on the evolution of diverse theories that emerged to address the fundamental mechanisms of ISF and DM processes has been reported in the literature. This paper presents an outline of the significant process and response parameters, experimental strategies, deformation mechanics and fracture behavior, toolpath generation techniques, and processes’ applications. The paper reports the motivation, research directions, existing gaps, and expansion in the domains of DM processes. The paper also outlines the evolution of incremental forming for deformation machining in the context of future critical applications in the domains of biomedical, aerospace, and automotive engineering.