AAAlfiya Fatykhovna Aminova

Alfiya Fatykhovna Aminova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Alfiya Fatykhovna Aminova has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • HUMAN FACTOR INFLUENCE ON MAIN PIPELINE ACCIDENT RATE

    by Alfiya F. Aminova, Airat V. Mukhamadiyarov, Ildar I. Suleymanov, Nikita A. Holkin, Alfiya F. Yakovleva

  • Fillers for polymer composite materials

    by A.K. Mazitova, I.I. Zaripov, G.K. Aminova, M.V. Ovod, N.L. Suntsova


  • Open Access

    Resource Cycling: Application of Anaerobic Utilization Methods

    by Irina N. Vikhareva, Guliya K. Aminova, Aliya K. Mazitova

    Human activity and modern production contribute to the formation of a certain amount of waste that can be recycled to obtain useful products and energy sources. Today, the higher the level of industrial development, the greater the amount of waste generated, and as a result, the more important the need for disposal. A similar pattern is typical for any human production activity; as a result of large-scale production, at least 70–80% of waste is generated in relation to the amount of raw materials used. The large-scale use of polymeric materials and the plastic waste generated after their use lead to environmental pollution. While a small part of the waste is utilized naturally due to the vital activity of soil microorganisms, and a part is purposefully processed by humans into products for various purposes, a fairly large amount of waste occupies large areas in the form of a variety of garbage. After the removal of garbage by incineration, the liberated territories cannot be transferred to agricultural land due to the high content of harmful contaminants. The harm to the environment is quite obvious. In practice, certain types of waste consist of more than 70% content of valuable substances that can find further practical application in a wide variety of industries.


  • Obtaining new additives for polyvinyl chloride compositions

    by A.R. Maskova, G.U. Yarmukhametova, R.G. Rakhmatullina, I.N. Sabitov, G.K. Aminova


  • Open Access

    Development of a Highly Efficient Environmentally Friendly Plasticizer

    by Irina N. Vikhareva, Guliya K. Aminova, Aliya K. Mazitova

    The purpose of this work is the synthesis of adipic acid ester and the study of the possibility of its use as a PVC plasticizer. The resulting butyl phenoxyethyl adipate was characterized by Fourier-transform infrared spectrometry, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The compatibility, effectiveness and plasticizing effect of butyl phenoxyethyl adipate in comparison with dioctylphthalate (DOP) were determined. The new environmentally friendly plasticizer has good compatibility with PVC and high thermal stability. The effectiveness of the plasticizing action of adipate based on the glass-transition temperature was 132.2 °C in relation to pure PVC and 7.7 °C in comparison to compounds based on DOP. An increase in the fluidity of the melt of polyvinyl chloride (PVC) compounds in the temperature range of 160–205 °C by 19–50% confirms a decrease in the energy intensity of the processes of manufacturing and the processing of polymer materials containing a new additive.


  • Open Access

    Study of the Rheological Properties of PVC Composites Plasticized with Butoxyethyl Adipates

    by Irina N. Vikhareva, Guliya K. Aminova, Aliya K. Mazitova

    Polyvinyl chloride compositions are widely used to obtain various types of products. In the composition of the PVC composite, one of the main ingredients is a plasticizer, the introduction of which makes it possible to vary the characteristics of the obtained polymeric materials and products and significantly expand the range of their application. Manufacturability in the processing of polyvinyl chloride compositions serves as an important criterion for the suitability and economic efficiency of the developed plasticizer. In the modern world, the high quality of products is directly related to their environmental safety. In this regard, the work describes the production of environmentally friendly plasticizers based on adipic acid and ethoxylated butanol. Their physicochemical indicators have been investigated. The effect of the obtained additives on the rheology of PVC composites has been studied. The values of the flow characteristics of the melts of the developed PVC compositions plasticized with butyl butoxyethyl adipate and decyl butoxyethyl adipate were estimated. It was shown that the fluidity of melts, in comparison with compounds of a similar composition containing industrial dioctyl phthalate, is characterized by even slightly higher values.


  • Open Access

    Ecotoxicity of the Adipate Plasticizers: Influence of the Structure of the Alcohol Substituent

    by Irina Nikolaevna Vikhareva, Guliya Karamovna Aminova, Aliya Karamovna Mazitova

    A significant increase in the production of plastic materials and the expansion of their areas of application contributed to the accumulation of a large amount of waste of polymeric materials. Most of the polymer composition is made up of plasticizers. Phthalate plasticizers have been recognized as potentially hazardous to humans and the environment due to the long period of their biodegradation and the formation of persistent toxic metabolites. It is known that the industrial plasticizer dioctyl adipate is characterized by reduced toxicity and a short biodegradation period. The paper describes the synthesis of a number of new asymmetric esters based on adipic acid and ethoxylated butanol by azeotropic esterification. The receipt of the products was confirmed by IR spectra. The physicochemical properties of the synthesized compounds were investigated. The glass transition temperatures of PVC composites plasticized with alkyl butoxyethyl adipates were determined using DSC analysis. The ecological safety of esters was assessed by the phytotesting method. Samples of adipates were tested for fungal resistance, and the process of their biodegradation in soil was also studied. It is shown that the synthesized esters have good plasticizing properties and are environmentally safe. When utilized under natural conditions, they can serve as a potential source of carbon for soil microorganisms and do not form stable toxic metabolites; therefore, they are not able to accumulate in nature; when the plasticizers under study are disposed of in the soil, toxic substances do not enter.


  • Open Access

    Designing of Green Plasticizers and Assessment of the Effectiveness of Their Use

    by Aliya K. Mazitova, Guliya K. Aminova, Irina N. Vikhareva

    The growing anthropogenic load on the lithosphere is currently characterized by the alienation of huge areas for solid domestic waste. One of the most common pollutants is traditional plastics with a degradation period of over 100 years. In connection with the increasing environmental requirements, polymer materials, along with a high set of technological and operational parameters, must be environmentally friendly and biodegradable. The development of polymer composite materials that undergo accelerated physicochemical and biological changes in the natural environment due to the introduction of biodegradable additives is one of the potential methods for processing synthetic materials and ensures the release of significant areas of fertile soils and lands from the steadily increasing amount of polymer waste. The use of adipic acid esters as PVC plasticizers contributes to the production of biodegradable composites. The article describes a method for obtaining new esters of adipic acid, presents the results of studying their properties for practical use in PVC composites, and assesses the economic efficiency of preventing damage to the environment when using them.


  • Open Access

    Application of Zinc Oxide to Obtain and Modify Properties of Adipate Plasticizer of Polyvinyl Chloride

    by Aliya K. Mazitova, Irina N. Vikhareva, Guliya K Aminova, Juliya N. Savicheva

    Heterogeneous catalysts are widely used in basic research and in the petrochemical industry due to their effectiveness. In modern times, interest in this type of catalyst and, in particular, in mineral oxides is associated with the technological design of the process, namely: The absence of waste emissions, and the possibility of regeneration and reuse of the catalyst, which meets the criteria of green chemistry. For this reason, the preparation of non-toxic adipate plasticizers is expediently carried out under conditions of heterogeneous catalysis. Zinc oxide was chosen for this purpose, and as initial reagents: Adipic acid, butoxyethanol, and phenoxyethanol. For synthesized butoxyethylphenoxyethyl adipate by thermogravimetry on a TGA-DSC-combined thermal analysis instrument and differential scanning calorimetry on a DSC-1 instrument («Mettler Toledo»), the following properties were studied: Thermal stability, melting and crystallization temperatures, polymer compatibility. An analysis of the data in comparison with di-2-ethylhexylphthalate confirmed the possibility of using it as a plasticizing additive in PVC compositions. The zinc compound obtained in situ as part of the developed plasticizing composition contributes to increasing the color and thermal stability of the obtained PVC compositions.


  • Oxidative method of wastewater treatment of woodworking industry enterprises

    by A.K. Mazitova, I.A. Sukhareva, A.F. Aminova, G.G. Yagafarova, R.I. Khangildin, E.G. Mukhametzyanova

    Sewage disposal of enterprises of wood-based industries contain toxic phenolic compounds in concentrations that exceed the admissible limit values. There is small data on the methods of their destruction in the literature, consequently, an oxidative method of purification of sewage disposal from the Ufa plywood slab plant using ozone was investigated. The optimum conditions of ozonation were determined by the kinetic curves of phenol decompounding. The highest, purification rate is achieved at pH = 11.5, temperature 23 degrees C and an ozone dose of 5 g/dm(3) at the initial concentration of phenol 0.263 mg/dm(3). It was found that the initial concentration of phenol in sewage disposal substantially affects the oxidation processes. Three samples of wastewater were taken for the study: initial sewage disposal, water purified by the coagulant Al-2(SO4)(3) and water scrubbed by the above mentioned coagulant and flocculant-cationic polyacrylamide of REF FC line. The phenol concentration decreases from 0.263 to 0.034 mg/dm(3) in 40 minutes at the time of ozonizing the initial drain water. The concentration of phenol in the explored sewage disposal after cleaning with a coagulant and ozonization decreases during 30 minutes from 0.09 to 0.031 mg/drn(3). Ozonizing the drain water after cleaning with coagulation and flocculation allows to achieve the required effect in 20 minutes. The concentration of phenol varies from 0.05 to 0.01 mg/dm(3) and chemical oxygen demand (COL)) is reduced by 70%. There was investigated ozonization with the use of catalysts: homogeneous (Fe2+) and heterogeneous (Fe2O3) as well. The best results of phenol disintegration are obtained in homogeneous catalysis, however, the disadvantage of the process is the need to remove the ferric form compounds and keeping up an acidic environment. The effect of COD purification by catalytic drain water ozonation increased by 15% and reached 75% (after the physico-chemical method of cleaning with a coagulant and flocculant). There are given physico-chemical indicators of the quality of the initial sewage disposal and after its purification in the study. The purification method studied allows to reduce the phenol level to the quality target. Provisinal ozonation of sewage increases the efficiency of further biological treatment.