AGAli Gharieh

Ali Gharieh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ali Gharieh has a total of 9 co-authors. Here are the top co-authors by number of shared publications:

  • Ako Sharifian

    Department of Polymer Chemistry, Faculty of Chemistry University of Isfahan Isfahan Iran

    2 shared publications
  • Shakiba Dadkhah

    Department of Polymer Chemistry, Faculty of Chemistry University of Isfahan Isfahan Iran

    2 shared publications
  • Akbar Omidvar

    Department of Polymer Chemistry, Faculty of Chemistry, University of Isfahan, 81746-73441 Isfahan, Iran

    1 shared publication
  • Amin Abdollahi

    Polymer Research Laboratory, Department of Chemistry Institute for Advanced Studies in Basic Science (IASBS) Zanjan Iran

    1 shared publication
  • Farzaneh Alipour

    Department of Polymer Chemistry, Faculty of Chemistry, University of Isfahan, 81746-73441 Isfahan, Iran

    1 shared publication
  • Laleh Sohrabi

    Department of Polymer Chemistry, Faculty of Chemistry University of Isfahan Isfahan Iran

    1 shared publication

Latest Publications

  • Self‐Healing Anticorrosive Coating Enabled by 8‐Hydroxyquinoline‐5‐Sulfonic Acid‐Doped Polyaniline: Synthesis and Applications

    by Ali Gharieh, Shakiba Dadkhah, Ako Sharifian

    The uncontrolled leaching of corrosion inhibitors from coatings into the environment, even when corrosion does not occur, causes environmental pollution and diminishes anticorrosion performance. To address these challenges, we developed an anticorrosive nanoscale additive based on 8‐hydroxyquinoline‐5‐sulfonic acid‐doped polyaniline (HQPA). The synthesized HQPA possesses synergistic anticorrosive properties due to the presence of PA, which provides anodic protection and creates a protective layer, and 8‐hydroxyquinoline‐5‐sulfonic acid, which not only enhances compatibility between HQPA and the polymer matrix but also, as an organic corrosion inhibitor, further improves corrosion protection through cathodic protection. Electrochemical analysis substantiated that the HQPA anticorrosive pigment could provide significant corrosion protection to submerged bare steel in an aqueous saline solution by forming a passive layer and mixed cathodic/anodic protection. Additionally, it was revealed that steel coated with an epoxy coating containing only 1 wt% HQPA exhibits a corrosion rate approximately 10 times lower than that of coatings containing non‐conjugated inhibitors. Furthermore, this coating possesses significant self‐healing attributes, with a healing rate of 97.5%. This strategic approach paves the way for the development and commercialization of materials offering robust corrosion protection and self‐healing features.


  • Open Access

    Enhanced long-term corrosion resistance and self-healing of epoxy coating with HQ-Zn-PA nanocomposite

    by Ali Gharieh, Ako Sharifian, Shakiba Dadkhah

    This study developed a self-healing, anti-corrosive coating based on a novel nanocomposite formulation of 8-hydroxyquinoline-5-sulfonic acid-zinc doped polyaniline (HQZn-PA) incorporated into an epoxy matrix. The chemical composition and surface morphology of the synthesized nanocomposite were thoroughly characterized using Fourier transform infrared spectroscopy, X-ray diffraction, nuclear magnetic resonance, and scanning electron microscopy. Electrochemical impedance spectroscopy and potentiodynamic polarization tests confirmed the outstanding corrosion resistance and self-healing efficiency of the coating. The synthesized HQZn-PA demonstrates enhanced anticorrosive properties through the synergistic effects of its constituents. Polyaniline (PA) contributes anodic protection and forms a barrier layer, while the chelation of zinc by 8-hydroxyquinoline-5-sulfonic acid (HQZn) improves PA compatibility within the polymer matrix and functions as an organic corrosion inhibitor. This dual action strengthens corrosion resistance through both anodic and cathodic protection mechanisms. The HQZn-PA nanocomposite reduced the corrosion rate of epoxy coating by 450× compared and maintained an impedance modulus of 1.03 × 1010 Ω cm2 after 40 days in a saline environment. The nanocomposite also demonstrated a self-healing efficiency of 99.28% in scratched coatings. These results highlight the potential of HQZn-PA as a highly effective corrosion inhibitor and self-healing agent for long-term metal protection in harsh environments.


  • Eco-Friendly AMPS-Doped Polyaniline/Urethane-Methacrylate Coating as a Corrosion Protection Coating: Electrochemical, Surface, Theoretical, and Thermodynamic Studies

    by Farzaneh Alipour, Ali Gharieh, Morteza Behzadnasab, Akbar Omidvar

    In this study, 2-acrylamido-2-methylpropanesulfonic acid (AMPS)-doped polyaniline (PANI) fibers were used as polymerizable smart anticorrosive agents to prepare eco-friendly UV-curable anticorrosive coatings. For this purpose, AMPS-doped PANI fibers were synthesized through chemical oxidative interfacial polymerization. The size and chemical structure of the prepared conducting fibers were characterized by scanning electron microscopy, 1H NMR, and Fourier transform infrared (FTIR) analyses. As a binder for the prepared conducting fibers, an eco-friendly fluorinated urethane-methacrylate dispersion was synthesized and fully characterized using FTIR analysis. Subsequently, various amounts of the synthesized fibers were mixed with the fluorinated binder to prepare UV-curable anticorrosive coatings. The physicochemical interactions between the PANI fibers and UV-curable binder were studied thoroughly using differential scanning calorimetry and thermogravimetric analyses and measurement of the gel contents and adhesion strength of the prepared composite coatings. The corrosion resistance performance of the prepared coatings was evaluated using electrochemical impedance spectroscopy analysis, and the obtained results revealed that the presence of 2 wt % of the AMPS-doped PANI fibers significantly enhanced the corrosion resistance of the obtained coating. In addition, the corrosion layers of the coatings were analyzed using X-ray photoelectron spectroscopy, which indicated that the AMPS-doped PANI fibers changed the composition of the corrosion product layer. To expand these attempts, this study also explores the interaction of AMPS-doped PANI fibers with the Fe(100) surface using density functional theory as well as atom in molecule calculations. All of the obtained results proved that the outstanding corrosion protection performance of the prepared composite coatings originated from exceptional chemical interactions between the unsaturated doping agents of the prepared PANI fibers and the UV-cured polymer.


  • Acrylic‐urethane/modified Rhodamine‐B eco‐friendly UV‐curable anticounterfeiting ink

    by Ali Gharieh, Amin Abdollahi, Laleh Sohrabi

    Counterfeiting is an ever‐growing global problem challenging companies, governments, and customers. In recent decades, as a potential remedy, anticounterfeiting technology and information security have gained a great deal of attention from academia and industry. In this work and for the first time, Rhodamine B (RhB), an efficient and enticing fluorescent material, was modified and used as a reactive stimuli‐responsive component in the formulation of an eco‐friendly ink. Additionally, a UV‐curable polyurethane dispersion (UCPUD) with zero volatile organic compound was synthesized and employed as the matrix for the fluorescent ink. The modified RhB and UCPUD were thoroughly characterized using Fourier‐transform infrared and proton nuclear magnetic resonance analyses. Exploiting the fluorescent monomer in the ink formulations could enhance the absorption intensity (λmax = 552 nm) of the prepared ink up to 7 with respect to its solution (λmax = 519 nm). The printed pattern was immediately illuminated with brilliant red‐pink fluorescence emission upon UV irradiation. It has been shown that the prepared fluorescent ink has potential applications in the encryption, security marking, and optical authentication of confidential cellulose substrates.


  • Eco‐friendly UV‐curable polyurethane‐silica superhydrophobic coating with superb mechanical durability

    by Ali Gharieh, Mohammadreza Pourghasem

    Herein, a facile, scalable, and cost‐effective method was used to fabricate eco‐friendly superhydrophobic UV‐curable polyurethane‐silica nanocomposite coating with promising physicomechanical properties. Fluorinated UV‐curable polyurethane dispersion was synthesized and used as the binder of the superhydrophobic coating along with hydrophobically modified silica nanoparticles as textured topography. The chemical structures of the employed silica nanoparticles, prepared UV‐curable polymer, and superhydrophobic coating were thoroughly studied by FTIR analysis. It has been revealed that the prepared SH coating possesses well‐defined micro/nano‐scale roughness, high contact angle (159°), and low sliding angle (1.5°), which can be applied onto various substrates. Also, the exceptional durability of the fabricated coating against sandpaper abrasion (over 80 m) without losing its superhydrophobicity revealed the high capability of the prepared waterborne coating to be used in harsh practical applications. Additionally, due to the highly cross‐linked structure of the prepared SH coating, the applied coating could maintain its integrity even after 30 days of immersion in different organic solvents. Moreover, the prepared coatings showed substantial potential for use in self‐cleaning and oil/water separation fields (> 98% efficiency after 15 cycles of oil/water separations). We are convinced that the prepared hybrid coating could offer a practical approach for fabricating of superhydrophobic materials as promising nominates for disparate fields.


  • Open Access

    A systematic study on the synergistic effects of MWCNTs and core–shell particles on the physicomechanical properties of epoxy resin

    by Ali Gharieh, Mir Saeed Seyed Dorraji

    Here, core–shell impact modifier particles (CSIMPs) and multiwalled carbon nanotubes (MWCNs) were used as reinforcing agents for improving the toughness and tensile properties of epoxy resin. For this purpose, emulsion polymerization technique was exploited to fabricate poly(butyl acrylate-allyl methacrylate) core-poly(methyl methacrylate-glycidyl methacrylate) shell impact modifier particles with an average particle size of 407 nm. It was revealed that using a combination of the prepared CSIMPs and MWCNTs could significantly enhance the toughness and tensile properties of the epoxy resin. Also, it was observed that the dominant factors for improving the fracture toughness of the ternary composites are crack deflection/arresting as well as enlarged plastic deformation around the growing crack tip induced by the combination of rigid and soft particles. The Response Surface Methodology (RSM) with central composite design (CCD) was utilized to study the effects of the amounts of CSIMPs and MWCNTs on the physicomechanical properties of the epoxy resin. The proposed quadratic models were in accordance with the experimental results with correlation coefficient more than 98%. The optimum condition for maximum toughness, elastic modulus, and tensile strength was 3 wt% MWCNT and 1.03 wt% CSIMPs. The sample fabricated in the optimal condition indicated toughness, elastic modulus, and tensile strength equal to 2.2 MPa m1/2, 3014.5 MPa, and 40.6 MPa, respectively.