EYEmily J. Yang

Emily J. Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Emily J. Yang has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Free Charge Generation in Organic Photoconversion Devices–the Impact of Electrostatic Potentials

    by Emily J. Yang, Song Yi Park, Vick Y. Qiu, Ji‐Seon Kim

    The generation of free charges in organic semiconductors is fundamentally limited by the formation of tightly bound electron‐hole pairs (excitons) arising from their low dielectric screening. Conventional donor/acceptor (D/A) heterojunctions overcome this limitation through interfacial energetic offsets at the cost of high voltage losses that limit organic photoconversion device efficiency compared to inorganic counterparts. The success of non‐fullerene acceptors (NFAs), enabling efficient charge generation at relatively small energetic offsets, challenges this picture and suggests the need to consider additional charge generation mechanisms. In this review, we highlight the critical role of molecular electrostatic potentials in free charge generation within organic semiconductors. The molecular origins of electrostatic potentials are discussed within the multipole expansion framework, with particular emphasis on quadrupole moments arising from anisotropic charge distributions within a molecule. The role of these electrostatic effects in modulating interfacial energetics, inducing band bending, and facilitating charge separation in donor/acceptor heterojunctions is examined, alongside their extension to single‐component systems. In single‐component systems, orientation‐dependent molecular packing creates functional energetic offsets without the need for distinct donor and acceptor materials. Based on these observations, key molecular and device design strategies for harnessing electrostatic effects in next‐generation organic photoconversion devices are outlined.

  • Open Access

    Breaking Crystallinity for Optimal Dark Current: Nonfullerene Acceptor Dilution as a Strategy for High‐Performance Organic Photodetectors

    by Chiara Labanti, Ying Sun, Joel Luke, Yifan Dong, Song Yi Park, Yi‐Chun Chin, Tianhao Lan, Emily J. Yang, Lei Zhang, Soranyel Gonzalez‐Carrero, et al.

    Organic photodetectors (OPDs) based on polymer donor:non‐fullerene‐acceptor (NFA) bulk heterojunction (BHJ) blends demonstrate great potential for light‐sensing applications, thanks to optoelectronic tunability and strong absorption. However, state‐of‐the‐art organic photoconversion devices lag behind silicon counterparts due to the laborious dark current, Jd, and photodetection speed optimization required in OPDs. Herein, the donor/acceptor blend ratio is controlled to optimize PM6:Y6‐based OPDs, with diluted Y6 blends (1:0.1 D/A weight ratio) strongly suppressing Jd to 6.5 × 10−9 A cm−2 (−4 V). Diluted OPDs exhibit faster photoresponse and poor short‐circuit photocurrent generation is dramatically improved under reverse bias. In‐depth photophysical and energetic analysis reveal the origin of high performance. In diluted blends, dissociation of emissive strongly bound excitonic charge‐transfer states within Y6 require electric field assistance, while the polymer matrix provides a continuous charge‐transport pathway. The generality of this strategy is tested with various NFAs, with NFA dilution being most effective for highly crystalline acceptors. It is determined that the reduction in dark current is predominantly driven by disruption of NFA crystallinity and intermolecular interactions. Polymer‐rich BHJ devices, therefore, provide an effective optimization method for reducing dark current in OPDs and are highly promising for industrial scalability due to facile processability, robust mechanical properties, and superior thermal stability.


  • Enhancing inter-domain connectivity by reducing fractal dimensions: the key to passivating deep traps in organic photovoltaics

    by Yuang Fu, Luhang Xu, Yuhao Li, Emily J. Yang, Yu Guo, Guilong Cai, Pok Fung Chan, Yubin Ke, Chun-Jen Su, U-Ser Jeng, et al.

    The detrimental impact of non-geminate recombination on high-performance organic photovoltaics has been recognised and primarily attributed to bimolecular recombination. However, the recent surge in Y-series acceptor-based systems draws attention to deep-trap-assisted monomolecular recombination. This study reveals the morphological origin of deep traps in the prototypical PM6:Y6 system, identifying isolated crystalline and amorphous Y6 domains as key contributors. The findings underscore the importance of improving inter-acceptor domain connectivity for effective trap passivation. For the first time, we have pinpointed a crucial metric for inversely quantifying the inter-acceptor domain connectivity: the crystalline domain fractal dimension (D). Due to the self-similar nature of fractal structures, the fractal dimension propagates across multi-length scales and can be controlled by tunning local intermolecular aggregation motifs. Remarkably, combining diiodide benzene (DIB) as the additive and layer-by-layer (LBL) processing effectively promotes the more extended backbone order of Y6 molecules, consequently reducing the fractal dimension and passivating deep traps. By applying this strategy to another high-performance system, D18:L8BO, a benchmark efficiency of 19.6 % was achieved, among the highest efficiencies reported for LBL OPVs.


  • Open Access

    Unraveling the Impact of Solution Filtration on Organic Solar Cell Stability

    by Emily J. Yang, Joel Luke, Yuang Fu, Zhuoran Qiao, Matthew Bidwell, Adam V. Marsh, Martin Heeney, Nicola Gasparini, Ji‐Seon Kim

    Despite major advances in efficiency, the operational stability of organic photovoltaic (OPV) devices remains poor. Therefore, understanding the degradation mechanisms and identifying potential solutions to improve device stability is critical to enabling the widespread commercialization of OPVs. Herein, simple filtration of the PBDB‐T:ITIC photoactive layer (PAL) solution prior to film deposition is demonstrated to enhance OPV device operational stability without compromising initial device performance. The effect of filtration, a commonly used but poorly understood OPV fabrication step, is investigated using a range of chemical, structural, and optoelectronic methods, on solutions and films. Filtration is found to remove large aggregates from solution without disrupting nanoscale preaggregation, resulting in enhanced acceptor ordering in PBDB‐T:ITIC thin films, significantly improving morphological stability and photostability. This simple and facile method is confirmed to be a general strategy that also works for other PBDB‐T‐containing OPV blends, including Y6‐based systems, and highlights how subtle changes in morphology can result in dramatic differences in operational stability.


  • Open Access

    Octupole moment driven free charge generation in partially chlorinated subphthalocyanine for planar heterojunction organic photodetectors

    by Aniket Rana, Song Yi Park, Chiara Labanti, Feifei Fang, Sungyoung Yun, Yifan Dong, Emily J. Yang, Davide Nodari, Nicola Gasparini, Jeong–Il Park, et al.

    In this study, high-performance organic photodetectors are presented which utilize a pristine chlorinated subphthalocyanine photoactive layer. Optical and optoelectronic analyses indicate that the device photocurrent is primarily generated through direct charge generation within the chlorinated subphthalocyanine layer, rather than exciton separation at layer interfaces. Molecular modelling suggests that this direct charge generation is facilitated by chlorinated subphthalocyanine high octupole moment (−80 DÅ2), which generates a 200 meV shift in molecular energetics. Increasing the thickness of chlorinated subphthalocyanine leads to faster response time, correlated with a decrease in trap density. Notably, photodetectors with a 50 nm thick chlorinated subphthalocyanine photoactive layer exhibit detectivities approaching 1013 Jones, with a dark current below 10−7 A cm−2 up to −5 V. Based on these findings, we conclude that high octupole moment molecular semiconductors are promising materials for high-performance organic photodetectors employing single-component photoactive layer.


  • Key molecular perspectives for high stability in organic photovoltaics

    by Joel Luke, Emily J. Yang, Chiara Labanti, Song Yi Park, Ji-Seon Kim


  • Open Access

    Strong Intermolecular Interactions Induced by High Quadrupole Moments Enable Excellent Photostability of Non‐Fullerene Acceptors for Organic Photovoltaics

    by Joel Luke, Emily J. Yang, Yi‐Chun Chin, Yuxuan Che, Lisa Winkler, Darius Whatling, Chiara Labanti, Song Yi Park, Ji‐Seon Kim

    Understanding degradation mechanisms of organic photovoltaics (OPVs) is a critical prerequisite for improving device stability. Herein, the effect of molecular structure on the photostability of non‐fullerene acceptors (NFAs) is studied by changing end‐group substitution of ITIC derivatives: ITIC, ITIC‐2F, and ITIC‐DM. Using an assay of in situ spectroscopy techniques and molecular simulations, the photodegradation product of ITIC and the rate of product formation are identified, which correlates excellently to reported device stability, with ITIC‐2F being the most stable and ITIC‐DM the least. The choice of acceptor is found to affect both the donor polymer (PBDB‐T) photostability and the morphological stability of the bulk heterojunction blend. Molecular simulations reveal that NFA end‐group substitution strongly modulates the electron distribution within the molecule and thus its quadrupole moment. Compared to unsubstituted‐ITIC, end‐group fluorination results in a stronger, and demethylation a weaker, molecular quadrupole moment. This influences the intermolecular interactions between NFAs and between the NFA and the polymer, which in turn affects the photostability and morphological stability. This hypothesis is further tested on two other high quadrupole acceptors, Y6 and IEICO‐4F, which both show impressive photostability. The strong correlation observed between NFA quadrupole moment and photostability opens a new synthetic direction for photostable organic photovoltaic materials.