Adam Wiśniewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adam Wiśniewski has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Przemysław Badurowicz
Wojskowy Instytut Techniczny Uzbrojenia
3 shared publications - Dawid Pacek
Military Institute of Armament Technology, Zielonka, Poland
2 shared publications - Krzysztof Szczurowski
Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology, 05-524 Warsaw, Poland
2 shared publications - Marcin Jasiński
Institute of Vehicles and Construction Machinery Engineering, Warsaw University of Technology, 02-524 Warsaw, Poland
2 shared publications - Norbert Tuśnio
Faculty of Safety Engineering and Civil Protection, The Main School of Fire Service, 01-629 Warsaw, Poland
1 shared publication - Piotr Dargacz
Avient Protective Materials
1 shared publication
Latest Publications
- 7 October 2025
- Published by Index Copernicus in PROBLEMY TECHNIKI UZBROJENIA
- Vol. 174 (3) , 97-110
PROTECTION CAPABILITY OF DYNEEMA HB26 SAMPLES SUBJECTED TO FIRING WITH A 20 MM FSP PROJECTILE
The paper presents a study of protection capabilities of Dyneema HB26 samples with mass area densities of 15 kg/m2 and 20 kg/m2 and dimensions of 600×800 mm subjected to firing with 20 mm FSP (Fragment Simulating Projectiles) fired with a 20×102 mm ballistic barrel, simulating the impact of a fragment according to STANAG 2920. The velocities of this projectile before impacting the sample and after piercing the sample (residual velocity) were estimated by recording the firing with the FASTCAM SA-Z 2100K high-speed camera. Complete or partial penetration of the samples was achieved, and the type of FSP deformation was shown depending on where the projectile hits the sample. The velocity of the projectile was calculated for each sample to determine the protection capability specified by the V50 parameter. The projectile impact velocity and deflection errors were deter-mined.
- 7 October 2025
- Published by Index Copernicus in PROBLEMY TECHNIKI UZBROJENIA
- Vol. 174 (3) , 97-110
PROTECTION CAPABILITY OF DYNEEMA HB26 SAMPLES SUBJECTED TO FIRING WITH A 20 MM FSP PROJECTILE
The paper presents a study of protection capabilities of Dyneema HB26 samples with mass area densities of 15 kg/m2 and 20 kg/m2 and dimensions of 600×800 mm subjected to firing with 20 mm FSP (Fragment Simulating Projectiles) fired with a 20×102 mm ballistic barrel, simulating the impact of a fragment according to STANAG 2920. The velocities of this projectile before impacting the sample and after piercing the sample (residual velocity) were estimated by recording the firing with the FASTCAM SA-Z 2100K high-speed camera. Complete or partial penetration of the samples was achieved, and the type of FSP deformation was shown depending on where the projectile hits the sample. The velocity of the projectile was calculated for each sample to determine the protection capability specified by the V50 parameter. The projectile impact velocity and deflection errors were deter-mined.
- 12 May 2023
- Published by Index Copernicus in PROBLEMY TECHNIKI UZBROJENIA
- Vol. 163 (1) , 27-38
TESTS ON IGNITION CAPABILITY OF GAS FROM A PROPANE-BUTANE CYLINDER AFTER SHOOTING IT THROUGH
The paper presents a methodology and re-search results over propane-butane (P-B) gas cylinders hit by various projectiles fired with a firearm for assessing the susceptibility on initiation a fire (ability to initiate the fire) at the shooting. Cylinders were arranged in two configurations: the cylinder alone, or the cylinder with an armour plate behind it. During the tests, the projectile flight, a gas cylinder behaviour and the temperature released during the projectile impact to the P-B gas cylinder were measured using a high-speed camera (FASTCAM SA-Z 2100K 50.400 fps) and thermal cameras (FLIR X6580sc, FLIR X6901scSLS). The mass of liquid P-B gas in a cylinder at the tests was between 0.511.0 kg.
- 12 May 2023
- Published by Index Copernicus in PROBLEMY TECHNIKI UZBROJENIA
- Vol. 163 (1) , 27-38
TESTS ON IGNITION CAPABILITY OF GAS FROM A PROPANE-BUTANE CYLINDER AFTER SHOOTING IT THROUGH
The paper presents a methodology and re-search results over propane-butane (P-B) gas cylinders hit by various projectiles fired with a firearm for assessing the susceptibility on initiation a fire (ability to initiate the fire) at the shooting. Cylinders were arranged in two configurations: the cylinder alone, or the cylinder with an armour plate behind it. During the tests, the projectile flight, a gas cylinder behaviour and the temperature released during the projectile impact to the P-B gas cylinder were measured using a high-speed camera (FASTCAM SA-Z 2100K 50.400 fps) and thermal cameras (FLIR X6580sc, FLIR X6901scSLS). The mass of liquid P-B gas in a cylinder at the tests was between 0.511.0 kg.
- Open Access
Thermal Energy Analysis of Projectiles during Ricochetting Using a Thermal Camera
This paper presents the results of a study of the hazards of ground ignition and/or explosion when various small-calibre projectiles struck various solid materials placed on a test stand in environments at risk of ignition (fire) or explosion (ricochets and projectile penetration of obstacles). For projectile ricochetting tests, the following were used: an armour plate, concrete, sidewalk and granite slabs, etc., and various small-calibre projectiles: 7.62 × 51 mm SWISS PAP, 7.62 × 51T, 7.62 × 51 mm M80, 7.62 × 54R B-32, 7.62 × 54R LPS and .308 Win. Norma Ecostrike. Projectiles impacts were recorded with a high-speed camera (50,400 fps) and thermal cameras (660 fps) and (2615 fps). The ignition capability of solid flammable materials during projectile ricochetting was studied, and the temperatures and surface areas of isotherms were measured as a function of time. From the spherical distribution of thermal energy radiation in space, their volumes, masses of air occupying the studied area, masses of projectile disintegrating into fragments (after impact), thermal energies during projectile ricochetting, histograms of area temperatures and temperatures were calculated. This energy was compared with the minimum ignition energy of the selected gases and liquid vapours, and the ignition temperature were determined. The probabilities of some of the selected gases and liquid vapours which can ignite or cause an explosion were determined. The thermal energies of the 7.62 × 54R B-32 (3400–9500 J) and 7.62 × 51T (2000–3700 J) projectiles ricochetting on the Armox 600 plate was sufficient to ignite (explode) propane−butane gas. The thermal energy of 7.62 × 54R B-32 projectiles ricochets on the non-metallic components (800–1200 J) was several times lower than that of projectiles ricochets on an Armox 600 plate (3400–9500 J). This is due to the transfer of much of the kinetic energy to the crushing of these elements.
Open AccessThermal Energy Analysis of Projectiles during Ricochetting Using a Thermal Camera
This paper presents the results of a study of the hazards of ground ignition and/or explosion when various small-calibre projectiles struck various solid materials placed on a test stand in environments at risk of ignition (fire) or explosion (ricochets and projectile penetration of obstacles). For projectile ricochetting tests, the following were used: an armour plate, concrete, sidewalk and granite slabs, etc., and various small-calibre projectiles: 7.62 × 51 mm SWISS PAP, 7.62 × 51T, 7.62 × 51 mm M80, 7.62 × 54R B-32, 7.62 × 54R LPS and .308 Win. Norma Ecostrike. Projectiles impacts were recorded with a high-speed camera (50,400 fps) and thermal cameras (660 fps) and (2615 fps). The ignition capability of solid flammable materials during projectile ricochetting was studied, and the temperatures and surface areas of isotherms were measured as a function of time. From the spherical distribution of thermal energy radiation in space, their volumes, masses of air occupying the studied area, masses of projectile disintegrating into fragments (after impact), thermal energies during projectile ricochetting, histograms of area temperatures and temperatures were calculated. This energy was compared with the minimum ignition energy of the selected gases and liquid vapours, and the ignition temperature were determined. The probabilities of some of the selected gases and liquid vapours which can ignite or cause an explosion were determined. The thermal energies of the 7.62 × 54R B-32 (3400–9500 J) and 7.62 × 51T (2000–3700 J) projectiles ricochetting on the Armox 600 plate was sufficient to ignite (explode) propane−butane gas. The thermal energy of 7.62 × 54R B-32 projectiles ricochets on the non-metallic components (800–1200 J) was several times lower than that of projectiles ricochets on an Armox 600 plate (3400–9500 J). This is due to the transfer of much of the kinetic energy to the crushing of these elements.
- Open Access
- 30 September 2016
- Published by Index Copernicus in Problems of Mechatronics Armament Aviation Safety Engineering
- Vol. 7 (3) , 21-34
Possibility of the Use of Different Types of Materials in Passive Ventilation Systems of Munitions
- 30 September 2016
- Published by Index Copernicus in Problems of Mechatronics Armament Aviation Safety Engineering
- Vol. 7 (3) , 21-34
Open AccessPossibility of the Use of Different Types of Materials in Passive Ventilation Systems of Munitions
- Open Access
- 30 June 2015
- Published by Index Copernicus in Problems of Mechatronics Armament Aviation Safety Engineering
- Vol. 6 (2) , 21-40
Flexible Modular Armour for Protection Against the 5.56 45 mm SS109 Projectiles
- 30 June 2015
- Published by Index Copernicus in Problems of Mechatronics Armament Aviation Safety Engineering
- Vol. 6 (2) , 21-40
Open AccessFlexible Modular Armour for Protection Against the 5.56 45 mm SS109 Projectiles