LRLiliana Edith Rojas-Candelas

Liliana Edith Rojas-Candelas

*This is an algorithmically generated author record based on publicly available information.

Liliana Edith Rojas-Candelas has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Multiscale Analysis Comparison of Cellulose in Apple Cultivars: Structure, Morphology, and Properties

    by José Jorge Chanona-Pérez, Liliana Edith Rojas-Candelas, Héctor A Calderon, Juan Vicente Méndez-Méndez, Octavio Catarino-Aguilar, Josué David Hernández-Varela

    This investigation aims to extract cellulose from four distinct apple varieties—Golden Delicious, Granny Smith, Gala, and Red Delicious—and determine its structural characteristics at different scales using advanced techniques such as super-resolution microscopy and spectroscopy. The cellulose microfibrils (>1 µm diameter) consist of nanofibrils (<500 nm) containing 2D nanofibers (30–200 nm). The crystalline structure of cellulose in the four apple varieties presents a range of lattice spacing between 3.82 and 5.96 Å. This is measured by using microscopy and computational simulation to determine the corresponding crystalline structure from the d-spacings and angles between different crystalline planes in the crystalline regions of the different apple celluloses. It is shown that the triclinic phase is predominant in all cellulose types under investigation. At the same time, measurement of nanomechanical properties shows that the Young's modulus of cellulose is around 2.50–4.54 GPa. The novelty of this contribution is to demonstrate that the simulated unit cells differ from other reported types of cellulose because the unit cell depends upon the microstructural arrangement and the morphology of the different tissues, giving rise to distinct properties.

  • Obtaining CMK-3 carbon using three different carbon sources: sucrose, commercial pectin, and pectin extracted from apple wastes

    by Karla Quiroz-Estrada, Liliana Rojas-Candelas, Felipe Cervantes-Sodi, Héctor A. Calderón, Diana Guerrero-Araque, Carlos Felipe


  • Open Access

    Development of Pericarp-Based Coatings from Corn Nixtamalization Residue for Stone Fruits: Applications for Peach and Tejocote

    by Liliana Edith Rojas-Candelas, Luisa Fernanda Duque-Buitrago, Mayra Díaz-Ramírez, Marcela González-Vázquez, Benjamín Arredondo-Tamayo, Juan V. Méndez-Méndez, Minerva Rentería-Ortega, Karla Quiroz-Estrada

    This study investigated corn pericarp, a by-product of the nixtamalization process, in developing sustainable films for fruit coatings. These films were evaluated for their optical, structural, barrier, and mechanical properties. The results showed that the pericarp films were transparent, had heterogeneous surfaces, and exhibited favorable mechanical and barrier properties, suggesting their potential as fruit coatings. The pericarp films significantly extended shelf life when applied to peaches and tejocotes postharvest. The films slowed the maturation process, as evidenced by minimal changes in peel and mesocarp color for up to five days for tejocotes and even longer for peaches. Additionally, coated fruits showed slower rates of weight loss, firmness reduction, and decreases in titratable acidity, total soluble solids, and total sugar content compared to control samples. These findings demonstrate the potential of corn pericarp films as effective coatings for extending the shelf life of stone fruits.

  • Open Access

    Microstructural Analysis of Popcorn Kernel and Pericarp

    by Liliana Edith Rojas-Candelas, Minerva Rentería-Ortega, Felipe Cervantes-Sodi, Hector A Calderon, Luisa Fernanda Duque-Buitargo, Moisés Crescencio-González

    Popcorn is widely consumed as a healthy snack worldwide. In the US alone, consumption reached 315 million tons in the years 2018-2019, while in China, it amounted to approximately 276 million tons [ 1]. Popcorn is composed of starch (7%), proteins (1.4%), and lipids (1%). In addition to these components, popcorn also contains phenolic compounds and essential amino acids, which contribute to its nutritional value [ 2]. The pericarp, the layer of the popcorn kernel, likewise contains proteins, lipids, and phenolic compounds, and presents nanomechanical properties that affect the popping process [ 1, 3]. This study focuses on the application of microscopy techniques and image analysis to investigate the microstructure of both the kernel and pericarp of popcorn.

  • Open Access

    Characterization Morpho-Structure of Instant Soups Dried by Oven and Freeze-Dried

    by Minerva Rentería-Ortega, Liliana Edith Rojas-Candelas, Edith González Benigno, Juan Vicente Méndez-Méndez, María de Lourdes Colín-Álvarez

    Currently, the increase of the increase in overweight and obesity at the world level causes serious health problems that affect the life quality of people. t is attributed to the great demand on the part of consumers to purchase instant foods, which have the problem of having low nutritional content and high percentages of sodium, which leads to a long-term health risk. Hence, the market needs to offer innovative products with better nutritional aspects, which are gaining greater strength and interest in people. The food industry is constantly changing since the needs and requirements of consumers change over time; therefore, the industry develops, improves, and innovates in food products without losing sight of the nutritional needs of consumers, foreseeing new techniques for preparing and preserving food. The aim is to make an instant soup based on different flours with a high protein and fiber content and two different drying methods: oven and freeze-dried.

  • Open Access

    Revisión:aplicación de la nanotecnología como innovación en recubrimientos alimentarios

    by María de Lourdes Colín-Álvarez, Georgina Calderón-Domínguez, Liliana Edith Rojas-Candelas, Minerva Rentería-Ortega

    A lo largo de su ciclo de vida, los plásticos sintéticos están asociados a problemas ambientales, ello se ha incrementado por sus aplicaciones en todas las áreas de la industria, particularmente en la alimentaria, ya que en medida que esta crece, la demanda de material de embalaje también, por lo que en los últimos años se ha buscado la disminución y sustitución de los empaques sintéticos, en este sentido, el desarrollo de los bioplásticos forman una clase de materiales poliméricos en rápido crecimiento que se presentan comúnmente como alternativas, ejemplos de ello es el desarrollo de recubrimientos alimentarios a partir de fuentes renovables-biodegradables, apoyados de la nanotecnología, que es un nuevo campo de investigación que transforma la industria alimentaria cambiando la forma de proceso de producción, envasado y consumo, por lo cual, el objetivo de esta revisión es brindar información sobre la nanotecnología, su implementación e importancia en la generación de nanomateriales, nanocápsulas y recubrimientos aplicados en los alimentos.


  • Comparison of the SMLM technique and the MSSR algorithm in confocal microscopy for super‐resolved imaging of cellulose fibres

    by Josué David Hernández‐Varela, Susana Dianey Gallegos‐Cerda, José Jorge Chanona‐Pérez, Liliana Edith Rojas Candelas, Eduardo Martínez‐Mercado

    Nowadays, the use of super‐resolution microscopy (SRM) is increasing globally due to its potential application in several fields of life sciences. However, a detailed and comprehensive guide is necessary for understanding a single‐frame image's resolution limit. This study was performed to provide information about the structural organisation of isolated cellulose fibres from garlic and agave wastes through fluorophore‐based techniques and image analysis algorithms. Confocal microscopy provided overall information on the cellulose fibres’ microstructure, while techniques such as total internal reflection fluorescence microscopy facilitated the study of the plant fibres’ surface structures at a sub‐micrometric scale. Furthermore, SIM and single‐molecule localisation microscopy (SMLM) using the PALM reconstruction wizard can resolve the network of cellulose fibres at the nanometric level. In contrast, the mean shift super‐resolution (MSSR) algorithm successfully determined nanometric structures from confocal microscopy images. Atomic force microscopy was used as a microscopy technique for measuring the size of the fibres. Similar fibre sizes to those evaluated with SIM and SMLM were found using the MSSR algorithm and AFM. However, the MSSR algorithm must be cautiously applied because the selection of thresholding parameters still depends on human visual perception. Therefore, this contribution provides a comparative study of SRM techniques and MSSR algorithm using cellulose fibres as reference material to evaluate the performance of a mathematical algorithm for image processing of bioimages at a nanometric scale. In addition, this work could act as a simple guide for improving the lateral resolution of single‐frame fluorescence bioimages when SRM facilities are unavailable.


  • Open Access

    Development of Biodegradable Films Produced from Residues of Nixtamalization of Popcorn

    by Liliana Edith Rojas-Candelas, Mayra Díaz-Ramírez, Adolfo Armando Rayas-Amor, Rosy Gabriela Cruz-Monterrosa, Juan Vicente Méndez-Méndez, Ma. de la Paz Salgado-Cruz, Georgina Calderón-Domínguez, Alejandro de Jesús Cortés-Sánchez, Marcela González-Vázquez

    Nejayote and pericarp derived from nixtamalization are an environmental problem. Therefore, there is research interest in using these residues as new compostable and environmentally friendly materials. This work aimed to create, characterize (color, thickness, water solubility, water adsorption capacity, microstructure, and degradability), and apply biodegradable films using residues of nejayote and pericarp of nixtamalized popcorn. Three types of films were compared, pericarp (P), nejayote–pericarp (NP), and nejayote (N), and were applied to avocado stored at room temperature. Results showed that the P film was the best because it was significantly (p < 0.05) more transparent (L = 94.75 ± 2.21) and thicker (0.27 ± 0.02 mm). It had higher water adsorption capacity (162.60 ± 14.05%) and higher elastic modulus and toughness (0.004 ± 0.001 MPa, 2.25 ± 0.25 J/m3) values than the N and NP films; in addition, its microstructure showed a roughness value (Ra) of 6.59 ± 0.57 nm that was intermediate compared to other films. Moreover, the P coating slowed down the maturing process of avocado and showed a visual effect against fungal infection. All films were generally soft and had a degradation time between 11 and 12 days. The novelty of this study is to provide the alternative of using nejayote and pericarp in a film that is compostable and maintains the lifespan of avocados.


  • Open Access

    Nanomechanical, Structural and Antioxidant Characterization of Nixtamalized Popcorn Pericarp

    by Liliana Edith Rojas-Candelas, Mayra Díaz-Ramírez, Adolfo Armando Rayas-Amor, Rosy Gabriela Cruz-Monterrosa, Juan Vicente Méndez-Méndez, Adriana Villanueva-Carvajal, Alejandro de Jesús Cortés-Sánchez

    Expanded popcorn grain is widely consumed as a healthy snack all around the world; however, the study of the behavior of its components by processes such as nixtamalization is scarce. Therefore, the aim of this work was to characterize the nanomechanical, structural, and antioxidant properties of nixtamalized popcorn grain pericarp. FT-IR results showed that the secondary structure of proteins of the nixtamalized pericarp was α-helix with 42.10%, the turn was 21.5% and 36.33% β-sheet, and proteins of the pericarp did not present the random coil structure. Pericarp showed antioxidant activity, as their values were 550.1 ± 2.9 and 44.2 ± 1.6 (TE)/mL for ABTS and DPPH, respectively; total phenols content was 0.21 ± 0.008 (TE)/mL; reducing power values were around 29 to 31%; hydroxyl radical scavenging ranged from 36 to 55% and iron chelation around 115 to 140% compared to the standard acids. Thickness values of the nixtamalized pericarp by SEM image analysis were 0.15 ± 0.1 mm near the pedicel inferior tip, 0.07 ± 0.01 mm at middle, and 0.03 ± 0.02 mm at upper of the grain. Young’s modulus value was 261.72 ± 23.58 MPa with a Gaussian function fitting at the distribution of all values. This research provides novel and valuable information for understanding the nanomechanical and protein arrangement, as well as and the antioxidant activity of nixtamalized popcorn grain pericarp in order to promote other processes and uses for this kind of pericarp maize.


  • Open Access

    Molecular structure characterization of extracted cellulose from different apple cultivars by transmission electron microscopy.

    by Liliana Edith Rojas Candelas, José Chanona-Pérez, Josué Hernández-Varela, Christian Kisielowski, Hector Calderon

    Molecular structure characterization of extracted cellulose from different apple cultivars by transmission electron microscopy. - Volume 27 Issue S1