YZYangmingyue Zhao

Yangmingyue Zhao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yangmingyue Zhao has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Atomic d‐d Orbital Coupling Drives Interfacial Spin‐Related Electronic Redistribution for Accelerated Sulfur Redox Kinetics

    by Hang Yang, Libo Li, Yangmingyue Zhao, Yonghong Zhang, Suo Li, Zhixuan Wang, Xiangrui Deng, Wenhao Xu, Wenyi Lu

    Heteronuclear Ni‐Co dual‐atom catalysts anchored on nitrogen‐doped carbon (NiCo DACs/NC) are constructed to clarify the relationship between intermetallic d‐d orbital coupling and bidirectional sulfur redox kinetics in lithium‐sulfur batteries. Combining spin‐resolved density functional theory, spin‐density mapping, and potential‐dependent magnetic measurements, we demonstrate that d‐oupling reconstructs the local 3d electronic structure, induces interfacial spin‐related electronic redistribution, and undergoes reversible dynamic evolution during sulfur reduction and Li 2 S oxidation. This regulation enhances polysulfide conversion, Li─S bond activation, and Li 2 S nucleation/deposition as well as oxidation/decomposition. Consequently, the NiCo DACs/NC‐based Li‐S battery delivers a discharge capacity of 1129.6 mAh g −1 at 1C and retains 864.6 mAh g −1 after 500 cycles (0.034% decay per cycle). Under a high sulfur loading of 9.12 mg cm −2 and lean electrolyte (3.5 µL mg −1 an areal capacity of 7.69 mAh cm −2 is achieved. A pouch cell delivers a component‐level energy density of 321.2 Wh kg −1 with 88.7% retention after 50 cycles. This work provides mechanistic insight into spin‐related electronic dynamics for designing high‐performance dual‐atom catalysts in Li‐S batteries.


  • Open Access

    Engineering robust EVA/OMMT frameworks for polymer electrolytes boosting mechanical strength and lithium-ion conductivity

    by Yangmingyue Zhao, Chunbao Wang, Fang Wu, Xilang Sun, Libo Li, Da Zhou, Yuhang Shan, Hang Yang

    Herein, we demonstrate that ethylene-vinyl acetate (EVA) serves as a molecular "expander" to significantly increase the interlayer spacing of organic-modified montmorillonite (OMMT). This structural expansion, driven by the physical binding of vinyl acetate groups within the polymer electrolyte (PE) matrix, bridges isolated conduction channels and reduces crystallinity, thereby facilitating rapid lithium-ion transport as visualized by molecular dynamics (MD) simulations. The resulting open-framework architecture triggers a three-dimensional nucleation process, promoting the formation of a robust solid electrolyte interphase (SEI) rich in LiF and Li3N. Consequently, the EVA/LOPPM composite achieves a high tensile strength of 5.56 MPa and a markedly enhanced lithium-ion transference number (tLi+) of 0.72. When paired with LiFePO4 (LFP) cathodes, the solid-state batteries deliver a high discharge capacity of 138 mAh g-1 at 5 C and maintain 106 mAh g-1 after 100 cycles at room temperature, demonstrating superior electrochemical performance and dendrite suppression.

  • Open Access

    Ethylene-vinyl acetate/organic-modified montmorillonite composite builds high-speed gliding track for lithium ions in polymer electrolytes

    by Yangmingyue Zhao, Libo Li, Da Zhou, Yuhang Shan, Xiaochuan Chen, Wenjun Cui, Hang Yang, Hao Tong, Shubo Fan

    Here, the ethylene-vinyl acetate (EVA) enhances the fluidity of lithium-ion transport and accelerates kinetics at the interface between organic-modified montmorillonite (OMMT) and EVA in electrolytes by increasing the OMMT layer spacing. The physical binding of vinyl acetate groups from EVA into polymer electrolytes (PEs) bridges the conduction channels for lithium ions in PE, resulting in reduced crystallinity that facilitates lithium-ion movement along chain segments of the PE matrix, as visualized by molecular dynamics (MD) simulation. The formation of open channels induces a three-dimensional nucleation process for lithium ions, promoting the development of a solid electrolyte interphase (SEI) film rich in LiF and Li3N. Consequently, EVA establishes a connection between the active site of OMMT and chain segments of PE to achieve significantly low crystallinity, high tensile strength (5.56 MPa), an increased number of Lewis acid centers, enhanced tLi+ value from 0.54 to 0.72, improved lithium-ion nucleation efficiency, inhibited dendrite growth, and overall enhanced electrochemical performance. The assembled Li│PE│LiFePO4 (LFP) at a current density of 5 C reaches a discharge specific capacity of up to 138 mAh g-1 while maintaining 106 mAh g-1 with a Coulombic efficiency of 96% after 100 cycles at room temperature (RT).

  • Open Access

    Small components play a big role - fillers in composite solid-state electrolytes for lithium metal batteries

    by Zhixuan Wang, Hang Yang, Suo Li, Hao Tong, Wenhao Xu, Yangmingyue Zhao, Libo Li

    Lithium metal batteries (LMBs), the energy conversion and storage technologies that have been thoroughly investigated, are utilized in various areas. Most current commercial LMBs use liquid electrolytes, but their safety cannot be guaranteed. In contrast, all-solid-state LMBs with solid-state electrolytes (SSEs) are regarded as next-generation energy storage systems owing to their enhanced safety. In the examination of SSEs, the benefits of composite SSEs (CSSEs) are particularly prominent. CSSEs relying on multiphase composites have better flexibility to tailor electrolyte performance based on demand and, thus, the design of components. Based on existing research presentations, we herein review the development of CSSEs. Firstly, the essential components of CSSEs are introduced, focusing on explaining the transport channel of Li ions within the polymer matrix and the impact of various fillers on this channel. The key performance parameters of CSSEs are described in detail. Subsequently, the fillers in CSSEs are meticulously classified; the critical roles played by different fillers in the polymer matrix are clarified, and the hotspots of current research are summarized. Furthermore, the prevalent structural design methodologies in CSSEs are examined, and the impact of various structures on battery performance is elucidated. Finally, the current problems of CSSEs and the future development prospects are summarized. This review is significant because it provides ideas for the design of CSSEs and contributes to the development of all-solid-state LMBs to realize their wide application.


  • Opening and Constructing Stable Lithium‐ion Channels within Polymer Electrolytes

    by Yangmingyue Zhao, Libo Li, Da Zhou, Yue Ma, Yonghong Zhang, Hang Yang, Shubo Fan, Hao Tong, Suo Li, Wenhua Qu

    Lithium‐ion batteries play an integral role in various aspects of daily life, yet there is a pressing need to enhance their safety and cycling stability. In this study, we have successfully developed a highly secure and flexible solid‐state polymer electrolyte (SPE) through the in situ polymerization of allyl acetoacetate (AAA) monomers. This SPE constructed an efficient Li+ transport channel inside and effectively improved the solid‐solid interface contact of solid‐state batteries to reduce interfacial impedance. Furthermore, it exhibited excellent thermal stability, an ionic conductivity of 3.82×10−4 S cm−1 at room temperature (RT), and a Li+ transport number (tLi+) of 0.66. The numerous oxygen vacancies on layered inorganic SiO2 created an excellent environment for TFSI− immobilization. Free Li+ migrated rapidly at the C=O equivalence site with the poly(allyl acetoacetate) (PAAA) matrix. Consequently, when cycled at 0.5C and RT, it displayed an initial discharge specific capacity of 140.6 mAh g−1 with a discharge specific capacity retention rate of 70 % even after 500 cycles. Similarly, when cycled at a higher rate of 5C, it demonstrated an initial discharge specific capacity of 132.3 mAh g−1 while maintaining excellent cycling stability.


  • Opening and Constructing Stable Lithium‐ion Channels within Polymer Electrolytes

    by Yangmingyue Zhao, Libo Li, Da Zhou, Yue Ma, Yonghong Zhang, Hang Yang, Shubo Fan, Hao Tong, Suo Li, Wenhua Qu

    Lithium‐ion batteries play an integral role in various aspects of daily life, yet there is a pressing need to enhance their safety and cycling stability. In this study, we have successfully developed a highly secure and flexible solid‐state polymer electrolyte (SPE) through the in situ polymerization of allyl acetoacetate (AAA) monomers. This SPE constructed an efficient Li+ transport channel inside and effectively improved the solid‐solid interface contact of solid‐state batteries to reduce interfacial impedance. Furthermore, it exhibited excellent thermal stability, an ionic conductivity of 3.82×10−4 S cm−1 at room temperature (RT), and a Li+ transport number (tLi+) of 0.66. The numerous oxygen vacancies on layered inorganic SiO2 created an excellent environment for TFSI− immobilization. Free Li+ migrated rapidly at the C=O equivalence site with the poly(allyl acetoacetate) (PAAA) matrix. Consequently, when cycled at 0.5C and RT, it displayed an initial discharge specific capacity of 140.6 mAh g−1 with a discharge specific capacity retention rate of 70 % even after 500 cycles. Similarly, when cycled at a higher rate of 5C, it demonstrated an initial discharge specific capacity of 132.3 mAh g−1 while maintaining excellent cycling stability.


  • Add an Extra Layer to Bring Lithium‐Ions Out of Disorder for Longevity of the Solid Full Batteries

    by Yangmingyue Zhao, Libo Li, Da Zhou, Hang Yang, Shubo Fan, Suo Li, Hao Tong, Wenhua Qu

    In the current era of rapid development in the new energy vehicle industry, graphite (Gr) has gained significant attention as the primary anode material for commercial lithium‐ion batteries due to its exceptional reversibility in lithium‐ion insertion/extraction and abundant availability. In this study, a multifunctional ferroelectric Bi12TiO20@C (BIT@C) modified interlayer between Gr and polymer electrolyte (PE) is fabricated. This approach established a channel and homogeneous ion‐conducting network that facilitated lithium‐ion intercalation into Gr at the interface while suppressing erratic lithium precipitation, thereby stabilizing the structure of Gr. The uniform electric field generated by BIT intercalation enabled homogeneous intercalation/deintercalation of lithium ions, effectively preventing the structural collapse of the Gr anode. Assembled LIBs exhibited reduced polarization and enhanced electrochemical properties attributed to facile charge transfer at the interface. The results revealed that Gr│carbon‐BIT@C‐lithium bistrifluoromethane sulfonimide (LiTFSI)/silicon dioxide (SiO2)/poly allyl acetoacetate (PAAA)/poly(vinylidene fluoride‐hexafluoropropylene) (P(VDF‐HFP))/polyvinylidene fluoride (PVDF)│LiFePO4 (LFP) batteries achieved an initial discharge specific capacity of 120.4 mAh g−1 with stable performance over 1200 cycles at 2 C and room temperature (RT), maintaining a Coulombic efficiency of 99.5% after 1200 cycles. The ferroelectric‐modified interface addressed challenges associated with ion transport at the electrode‐electrolyte interface.


  • In Situ Construction Channels of Lithium‐Ion Fast Transport and Uniform Deposition to Ensure Safe High‐Performance Solid Batteries

    by Yangmingyue Zhao, Libo Li, Yuhang Shan, Da Zhou, Xiaochuan Chen, Wenjun Cui, Heng Wang

    Solid‐state lithium‐ion batteries (SLIBs) are the promising development direction for future power sources because of their high energy density and reliable safety. To optimize the ionic conductivity at room temperature (RT) and charge/discharge performance to obtain reusable polymer electrolytes (PEs), polyvinylidene fluoride (PVDF), and poly(vinylidene fluoride‐hexafluoro propylene) (P(VDF‐HFP)) copolymer combined with polymerized methyl methacrylate (MMA) monomers are used as substrates to prepare PE (LiTFSI/OMMT/PVDF/P(VDF‐HFP)/PMMA [LOPPM]). LOPPM has interconnected lithium‐ion 3D network channels. The organic‐modified montmorillonite (OMMT) is rich in the Lewis acid centers, which promoted lithium salt dissociation. LOPPM PE possessed high ionic conductivity of 1.1 × 10−3 S cm−1 and a lithium‐ion transference number of 0.54. The capacity retention of the battery remained 100% after 100 cycles at RT and 0.5 C. The initial capacity of one with the second‐recycled LOPPM PE is 123.9 mAh g−1. This work offered a feasible pathway for developing high‐performance and reusable LIBs.


  • A Charge Equalizer in Accordion—MXene‐Modified Layer Leading to Spherical Lithium Deposition

    by Yangmingyue Zhao, Libo Li, Da Zhou, Yuhang Shan, Xiaochuan Chen, Wenjun Cui

    Lithium‐ion batteries with polymer electrolytes (PEs) are promising candidates for high safety performance batteries. However, conventional PEs suffer from poor compatibility and high impedance of electrolyte–electrode interfaces. Herein, we present a method of the interfacial modification for PEs to inhibit lithium dendrites based on the solution to the interfacial compatibility. Our strategy is to improve the interfacial properties and inhibit the dendrite generation by coating a modified layer on PEs of the anode side with acetylene black (AB) and MXene. The mixed conductive layer (MCL) can promote the generation of Li3N and LiF with a uniform arrangement of electrons to form a dense solid electrolyte interphase layer and the even lithium‐ion deposition for improving the performance and stability of the battery during cycling. After adding the MCL, the discharge capacity of solid lithium‐ion batteries (SLIBs) with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)/organic modified montmorillonite (OMMT)/soybean isolate protein (SPI)/poly(vinylidene fluoride) (PVDF) (LOSP) PE from 74.2 mAh g−1 up to 111.1 mAh g−1 (AB‐LiTFSI/OMMT/SPI/PVDF (AB‐LOSP)) and 111.6 mAh g−1 (AB/MXene‐LiTFSI/OMMT/SPI/PVDF (AB/MXene‐LOSP)). The polarization voltage dropped by 0.06 and 0.12 V, respectively. This work represents a milestone in the dendrite‐free SLIBs with good performances.