HKHibarkah Kurnia

Hibarkah Kurnia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hibarkah Kurnia has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    INTEGRASI MANAJEMEN RANTAI PASOK BAHAN BAKU DAN PENGENDALIAN KUALITAS BERBASIS PDCA UNTUK MEMINIMALKAN KECACATAN PRODUK PADA UMKM KOPI JAGO

    by Oki Widhi Nugroho, Sonny Nugroho Aji, Roberta Heni Anggit, Ario Senaputra, Hibarkah Kurnia

    Industri minuman siap saji berbasis kopi di Indonesia mengalami pertumbuhan pesat yang menuntut konsistensi kualitas produk. UMKM Kopi Jago menghadapi permasalahan serius berupa tingginya tingkat kecacatan produk pada periode Juli 2024–Juni 2025 dengan rata-rata 7,15% per bulan, jauh melampaui batas toleransi maksimal perusahaan sebesar 5%. Permasalahan ini tidak hanya bersumber dari proses internal, tetapi juga dipicu oleh kelemahan manajemen rantai pasok bahan baku hulu, khususnya kondisi penyimpanan biji kopi yang kurang optimal di gudang sehingga memicu oksidasi. Kondisi ini berdampak pada kerugian finansial rata-rata Rp6.520.000 per bulan serta meningkatnya keluhan pelanggan. Penelitian ini bertujuan mengidentifikasi jenis dan faktor penyebab cacat produk serta merumuskan dan mengevaluasi rekomendasi perbaikan kualitas terintegrasi di UMKM Kopi Jago. Penelitian kuantitatif deskriptif ini menerapkan pendekatan Plan-Do-Check-Action (PDCA) yang dikombinasikan dengan P-chart, Diagram Pareto, Diagram Fishbone, dan analisis 5W+1H. Lima jenis cacat dominan teridentifikasi: rasa tidak sesuai (23,8%), isi kurang/lebih (19,8%), cup/tutup bocor (16,5%), label rusak (12,5%), dan endapan berlebih (10,7%), dengan total kontribusi 83,4%. Langkah perbaikan mencakup perbaikan manajemen logistik gudang bahan baku, preventive maintenance, penyusunan SOP/IK, dan pelatihan operator. Hasil evaluasi pasca-perbaikan menunjukkan penurunan tingkat kecacatan dari 7,15% menjadi 4,83%, peningkatan nilai kapabilitas proses (Cpu) dari -2,82 menjadi 0,26, serta efisiensi kerugian biaya menjadi Rp4.530.000 per bulan. Integrasi siklus PDCA dan manajemen rantai pasok bahan baku terbukti efektif meningkatkan konsistensi mutu serta efisiensi operasional UMKM coffee-to-go. Penelitian ini memberikan kontribusi komprehensif pada kajian manajemen kualitas berbasis rantai pasok dari hulu ke hilir).

  • Open Access

    PERCEPATAN RANTAI PASOK MELALUI INTEGRASI LEAN DAN GREEN MANUFACTURING PADA PRODUKSI PARTS OTOMOTIF UNTUK KEBERLANJUTAN ORDER PELANGGAN

    by Hibarkah Kurnia, Asep Arwan Sulaeman, Vebina Sheila Pasha

    Keterlambatan pengiriman suku cadang otomotif menjadi fenomena serius dalam rantai pasok industri kendaraan roda empat, terutama pada komponen berbahan polipropilen (PP) yang mengalami keterlambatan hingga 26 hari dari target 18 hari, disertai overproduksi, tingkat cacat 6% per bulan, serta pencemaran udara akibat pembakaran limbah produksi. Penelitian ini bertujuan mempercepat waktu proses produksi, mengurangi pemborosan dan pencemaran lingkungan, serta menyeimbangkan stok produksi dengan pesanan pelanggan agar order tetap berkelanjutan. Metode yang digunakan adalah pendekatan campuran deskriptif-eksploratif melalui Focus Group Discussion (FGD), Current State Mapping (CSM), tindakan perbaikan Just in Time (JIT) dan e-Kanban berbasis barcode-RFID, re-layout area perakitan dan inspeksi akhir ke satu gedung, kemudian diukur kembali dengan Future State Mapping (FSM) dalam kerangka integrasi Lean dan Green Manufacturing. Hasil penelitian menunjukkan waktu proses produksi satu lot (3.656 pcs) turun dari 11,0 hari menjadi 4,5 hari (reduksi 59%), process time menyusut 60% dan lead time 40%. Produksi rata-rata meningkat dari 42.917 pcs menjadi 59.990 pcs per bulan (efisiensi 78% menjadi 90%), tingkat cacat turun dari 6% menjadi 0,6%, perputaran persediaan terkendali di bawah 30 hari, dan capaian rencana pengiriman mencapai 96% sehingga keberlanjutan order pelanggan terjamin dan pembakaran limbah dapat dieliminasi.

  • Open Access

    Optimizing the availability of high frequency precision quenching machines through the overall equipment effectiveness approach at PT XYZ

    by Arif Nuryono, Yuri Delano Regent Montororing, Andika Risky Wijaya, Hibarkah Kurnia

    One of the Automotive companies that uses a High Frequency Precision Quenching (HFPQ) machine experiences a high downtime problem of 71.27%, which causes a low availability value of 80.10%, which is still below the world-class standard of 90%. so that production targets are not achieved optimally. This study aims to analyze the effectiveness level of the HFPQ machine and identify the factors causing low availability to increase the Overall Equipment Effectiveness (OEE) value. The research method uses an analytical integration approach with the OEE method, Six Big Losses (SBL) analysis, and other methods. The results show that the HPPQ machine's availability value before improvement was 80.10%, after improvement it increased by 92.25%, meaning an increase of 12.15%. The largest losses were caused by downtime losses and setup losses, totaling 37,640 minutes over a 6-month period. This condition resulted in availability being the dominant contributor to OEE losses, with a value of approximately 71.27%. Based on the proposed improvements, the availability increased by 92.25%, meaning an increase of 12.15%, while the OEE value improved from 70.39% to 86.07% or an increase of 15.68% after implementing maintenance improvements. This research is expected to provide a basis for improving the machine maintenance system in order to enhance the effectiveness and productivity of the company.

  • Open Access

    UPAYA PENINGKATAN KUALITAS SABLON PADA UMKM KONVEKSI KAOS UNTUK KEBERLANJUTAN PESANAN PELANGGAN DI ERA DISRUPSI

    by Hibarkah Kurnia, Sunita Dasman, Asep Arwan Sulaeman, Krisna Budi Juliantoro, Rizky Hidayat

    Usaha Mikro Kecil Menengah (UMKM) konveksi kaos mengalami pasang surut dalam menjalankan produksi untuk memenuhi kepuasan pelanggan. Menurut data produksi kaos sablon selama tahun 2020-2021 mengalami penurunan yang drastis sebesar 79% dikarenakan adanya pandemi Covid-19. Di era distrupsi saat ini, produksi kaos tidak hanya terpaku pada kegiatan yang manual tetapi sudah mulai dengan inovasi teknologi baru. Pengabdian ini bertujuan untuk memberikan solusi pada peningkatan kualitas kaos sablon dan menambah strategi pemasaran dalam peningkatan jumlah penjualan. Pengabdian ini menggunakan metode penyuluhan, pengumpulan data, pelatihan dan memberikan solusi kongkrit pada UMKM konveksi kaos. Pengabdian ini menghasilkan adanya penurunan komplain terbukti dari bulan Apr-Mei 2025 hanya mendapatkan rata-rata komplain 2 kali per bulan dan sudah memenuhi target complain sebanyak 3 kali perbulan atau sebesar 300%, artinya peningkatan kualitas sablon yang sudah didapatkan oleh UMKM. Penambahan strategi pemasaran juga meningkat yang tadinya 1 ide strategi menjadi 4 ide strategi pemasaran. Hal ini berpengaruh pada peningkatan jumlah penjualan dari tahun 2024 sebesar 91.080 pcs atau rata-rata 7590 pcs perbulan naik menjadi 10.000 pcs perbualan, atau diakhir tahun 2025 harapannya dapat meningkat menjadi 113.800 pcs.

  • Open Access

    How to Increase Machine Efficiency in the Diaper Production Process Using a Lean Manufacturing Approach

    by Hibarkah Kurnia, Adriana Anteng Anggorowati, Arif Nuryono, Nur Ain Jaelani

    In today's manufacturing world, competition is increasingly fierce; therefore, every company is trying its best to increase productivity as one of the strategies to be able to compete in the market. PT. XYZ is currently facing problems related to the effectiveness of machine or equipment operations. The problem currently being faced is the length of the diaper change production process, which takes up to 8100 seconds/135 minutes, causing a decrease in machine efficiency by 25%. This study aims to reduce the time of the diaper change production process, which takes a long time. The research method employs the Lean Manufacturing (LM) approach, utilising Value Stream Mapping (VSM) and Single Minute Exchange of Dies (SMED) methods to reduce the production time of diaper item changes, thereby increasing machine efficiency. The results of this study showed a diaper change production process time of 135 minutes, and the time after using LM was reduced to 105 minutes. By presenting a diaper change production process time efficiency of 20%, these results indicate that the VSM and SMED methods can be used to reduce waste and speed up the diaper change production process time.

  • Open Access

    Peran Total Quality Management Terhadap kegagalan produk dan Cacat Produk (Studi Kasus pada IKM Fabrikasi Manufaktur di Kota Bekasi)

    by Muhammad Ifdol, Arya Putra Utama, Rizal Deokosta, Abdul Mujid, Hibarkah Kurnia

    Industri Kecil Menengah (IKM) merupakan penyumbang pendapatan negara terbesar di Indonesia, namun pada kenyataannya mutu produk IKM fabrikasi manufaktur memiliki tren negatif. Hal ini dikarenakan produk IKM fabrikasi manufaktur memiliki tingkat kecacatan yang cukup signifikan. Tujuan penelitian ini adalah (1) menganalisis tingkat cacat produk, (2) menganalisis tingkat penerapan Total Quality Management (TQM) (3) menganalisis faktor-faktor yang signifikan mengurangi cacat. Klaster IKM fabrikasi manufaktur yang terletak di kelurahan bantargebang,sumur batu dan cikiwul terletak di Kecamatan bantargebang, kota bekasi. Penelitian ini menggunakan 109 responden melalui kuesioner, data diolah dengan regresi linear berganda. Hasil TQM berdampak signifikan untuk mengurangi cacat produk, maka IKM jenis ini perlu menerapkan TQM secara konsisten.

  • Open Access

    Implementation of the Six Sigma-DMAIC Method in Improving Quality Product Scanning Units in the Electronics Industry

    by Dimas Azib Saputra, Hibarkah Kurnia, Syarah Rizkia Feriaty

    The current era of globalization demands that all sectors of the manufacturing industry can improve the quality of service to customers. The electronics industry sector in Indonesia still has several defective products received by distributors. One electronic product that still has defects in the product is the scanner unit product. This research aims to identify defects that occur in the scanner unit assembly process and improve product quality by controlling the process. This research method uses the Six Sigma method at the Define, Measure, Analyze, Improve, Control (DMAIC) stages. This research has found that there are dominant foreign material defects of 221 pcs (35.42%) of the total defects of 624 pcs from January to February 2024. The causal factor is that the man consisting of WI (Work Instruction) is not carried out properly and the operator is not careful. at the check point, the method consists of installing the glass label in the glass box, there is no process of checking the glass box before reuse, the material consists of burrs on the lower housing material, the presence of dust and stains on the carriage cis components, and the machine consists of the vacuum device does not inhale optimally, and the air pressure in the blowing machine is not optimal. The results of this research show an improvement in total defects from 624 pcs in Jan - Feb 2024 to 229 pcs and in April - May 2024, with a percentage of 1.662% decreasing to 0.571%. Meanwhile, the sigma level percentage results increased by 0.33 from 4.39 to 4.72 sigma level.


  • Open Access

    Reduction of changeover time and solvent cleaning cost in tank cleaning process in paint manufacturing industry in Indonesia

    by Krisna Budi Juliantoro, Hibarkah Kurnia, Syarah Rizkia Feriaty

    In the era of globalization, competition in the manufacturing industry is increasing, especially regarding product quality and customer service. One of the paint manufacturing companies in Indonesia has experienced an increase in production volume in line with increasing market demand, as reflected in annual sales growth of 25-29%. As a market leader in the field of marine coatings and protective coatings with a market share of more than 29%. These challenges impact the tank cleaning process, which directly affects the duration of change over time with each product changeover. Based on company standards, the ideal changeover time is 30 minutes for each product changeover during tank cleaning. This research aims to reduce the duration of changes over time and reduce wasted costs in purchasing cleaning solvents (solvents) needed in the tank cleaning process at each batch change. The method of this research is a combination of A3 Problem Solving and Single-Minute Exchange of Dies (SMED), which is designed to compile documentation solutions in a consistent, clear, and structured manner. Research findings reveal that the duration of the initial change required reaches 95 minutes with a monthly solvent purchase cost of IDR 10,500,000. By converting several internal activities into external activities, the duration of the change to be completed was reduced to 30 minutes, and the completion cost was IDR 3,500,000 per month. Overall, this research shows an over-time change efficiency of 68% and operational cost savings of up to 66% in the tank cleaning process.


  • Open Access

    Sigma level choice examination in executing incline Lean Six Sigma (LSS) within the material and item material industry

    by Hibarkah Kurnia, Tri Ngudi Wiyatno, Bayu Hari Nugroho, Arif Nuryono

    Many manufacturing industries in the world use the Lean Six Sigma (LSS) approach in analyzing and improving waste activities and reducing production defects. The Textile and Product Textile (TPT) industry can also be easily implemented because this industry is a labor-intensive industry. However, in its development, no one has analyzed the sigma level in the TPT industry by reviewing studies. The sigma level obtained from various sources and various types of TPT industries cannot yet be concluded about the sigma level value for each type of industry. This research points to look at writing articles related to LSS, particularly within the TPT industry. This inquire about employments the clustering strategy, specifically a refinement research strategy taken within the TPT industry within the writing review. This ask around found dispersions of 55 articles that were effectively studied inside the composing with the Six Sigma technique being the preeminent broadly utilized and more explore objects based on the tall quality of 41 articles. Gathering by industry section is the piece of clothing industry with 14 articles that reinforce the LSS. In the interim, based on nation groupings, the biggest number is Indonesia with 19 articles. It is trusted that this inquire about commitment can ended up a reference for anybody who will utilize LSS within the fabricating industry.


  • Open Access

    Decision Analysis of Work Discipline and Employee Performance Variables Influenced by Motivation and Self-Efficacy Using the Path Analysis Method

    by Didin Sjarifudin, Jumawan Jumawan, Hibarkah Kurnia

    An organization that has a top-down type of command line wants its business to run smoothly, but sometimes there are obstacles due to differences in employee characteristics. Every organization has problems in improving the performance of its employees which are often affected by indiscipline at work. Work discipline is also problematic due to decreased employee confidence and work motivation. This research was conducted to create a research hypothesis regarding can work discipline and employee performance be influenced by motivation and self-efficacy. This research method uses a path analysis method whose data source is the results of questionnaire data collection involving several respondents from the West Java region of Indonesia. This research has found that the variables of self-efficacy and individual motivation do not partially influence discipline. However, these two variables have a significant influence on the discipline variable simultaneously at 39.4 percent. These two variables also influence employee performance. Then the combination of exogenous variables simultaneously has a significant influence on the performance variable of 67.9 percent. The contribution of this research is that every organization pays attention to employee character, self-efficacy, and motivation because it influences employee discipline and can improve employee performance in terms of productivity.