Jerzy Karczewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jerzy Karczewski has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Andrzej Woźnica
Silesian Water Centre, Faculty of Natural Sciences, University of Silesia in Katowice, 40-007 Katowice, Poland
3 shared publications - Bartosz Łozowski
Institute of Biology, Biotechnology and Environmental Protection, Faculty of Natural Sciences, University of Silesia in Katowice, Bankowa 9 Str., 40-007 Katowice, Poland
2 shared publications - Izabela Potocka
Institute of Biology, Biotechnology, and Environmental Protection, Faculty of Natural Sciences, University of Silesia in Katowice, 40-032 Katowice, Poland
2 shared publications - Joanna Jura-Morawiec
Polish Academy of Sciences Botanical Garden - CBDC in Powsin, Warsaw, Poland
2 shared publications - Joanna Szymanowska-Pułka
Department of Biophysics and Plant Morphogenesis, University of Silesia, Katowice, Poland
2 shared publications - Agnieszka Babczyńska
Institute of Biology, Biotechnology and Environmental Protection, University of Silesia in Katowice
1 shared publication
Latest Publications
- Open Access
The Physical and Mechanical Properties of Arundo donax (L.) Reeds Affect Their Acoustic Quality
Arundo donax (L.) is a perennial monocot (Poaceae) native to Asia, which has spread throughout the Mediterranean region. Its hollow stem has been used for millennia to produce reeds, thin strips whose vibration is modulated by musical instruments such as oboes and saxophones. Significant differences in sound quality occur among reeds of different provenances, despite the extreme genetic homogeneity of A. donax, mainly due to its clonal mode of reproduction. Reed samples from three different provenances and different sound qualities were analyzed. Samples of dissected internodes of selected brands were examined to determine material density and mechanical properties along the stem radius. These characteristics vary between the brands and change with the sample thickness (along the radius of the stem) according to a power function. Next, Ashby graphs were used to compare the properties of Arundo reed samples with those of other natural materials. Using Ashby graphs potentially provides indications for producing musical reeds of the desired sound quality.
Open AccessThe Physical and Mechanical Properties of Arundo donax (L.) Reeds Affect Their Acoustic Quality
Arundo donax (L.) is a perennial monocot (Poaceae) native to Asia, which has spread throughout the Mediterranean region. Its hollow stem has been used for millennia to produce reeds, thin strips whose vibration is modulated by musical instruments such as oboes and saxophones. Significant differences in sound quality occur among reeds of different provenances, despite the extreme genetic homogeneity of A. donax, mainly due to its clonal mode of reproduction. Reed samples from three different provenances and different sound qualities were analyzed. Samples of dissected internodes of selected brands were examined to determine material density and mechanical properties along the stem radius. These characteristics vary between the brands and change with the sample thickness (along the radius of the stem) according to a power function. Next, Ashby graphs were used to compare the properties of Arundo reed samples with those of other natural materials. Using Ashby graphs potentially provides indications for producing musical reeds of the desired sound quality.
- Open Access
- 14 June 2024
- Published by Polish Botanical Society in Acta Societatis Botanicorum Poloniae
- Vol. 93, 1-15
Sensitivity and strength of maize roots facing different physical conditions of the growth medium
The morphology of a plant's root is strongly affected by the compaction of the growth medium, the size of its particles, or the presence of non-movable obstacles. However, little is known about the effect of these characteristics on root anatomy and mechanical properties of the root tissues....
- 14 June 2024
- Published by Polish Botanical Society in Acta Societatis Botanicorum Poloniae
- Vol. 93, 1-15
Open AccessSensitivity and strength of maize roots facing different physical conditions of the growth medium
The morphology of a plant's root is strongly affected by the compaction of the growth medium, the size of its particles, or the presence of non-movable obstacles. However, little is known about the effect of these characteristics on root anatomy and mechanical properties of the root tissues....
- Open Access
- 5 August 2022
- Published by Taylor & Francis in The European Zoological Journal
- Vol. 89 (1) , 1002-1017
The spatial structure (3D) and mechanical properties of the sponge Spongilla lacustris L. (Porifera: Spongillida) skeleton as a potential tensegral architecture
Complex biological systems often provide ready solutions for contemporary engineering. One such organism might be sponges, primitive, tissueless animals whose evolution over 600 million years has allowed them to become highly specialized. An example of such an organism is the freshwater sponge Spongilla lacustris L., an organism that filters water. This study aimed to investigate the 3D structure of the aforementioned sponge using a broad spectrum of techniques such as Microcomputed Tomography (µCT), Scanning Electron Microscopy (SEM), Confocal Laser Scanning Microscopy (CLSM), and Light Microscopy. Additionally, these techniques have been used to correlate sponge architecture with mechanical properties using the concept of tensegrity, i.e., the feature of architectural structures that self-stabilize by balancing multidirectional, often opposing, tensile and compressive forces. A more detailed look at the structure of the sponge skeleton reveals that it is based on two elements: rigid siliceous spicules, chitin in in fibres with cementing collagen-type spongin material. The coexistence of these elements in the sponge structure determines the mechanical properties and, consequently, the sponge skeleton’s postulated tensegrity. Our observations indicate that the integrity of loose megascleres is realized by sponging material surrounding the bundles of spicules. Our distinction of skeletal elements was determined by the number of spicules in the bundle, the direction of spicule position relative to the main body axis, and the way the elements were connected. The arrangement of the bundles described above has important implications for the mechanical properties of the sponge skeleton and, consequently, for the tensegrity hypothesis.
- 5 August 2022
- Published by Taylor & Francis in The European Zoological Journal
- Vol. 89 (1) , 1002-1017
Open AccessThe spatial structure (3D) and mechanical properties of the sponge Spongilla lacustris L. (Porifera: Spongillida) skeleton as a potential tensegral architecture
Complex biological systems often provide ready solutions for contemporary engineering. One such organism might be sponges, primitive, tissueless animals whose evolution over 600 million years has allowed them to become highly specialized. An example of such an organism is the freshwater sponge Spongilla lacustris L., an organism that filters water. This study aimed to investigate the 3D structure of the aforementioned sponge using a broad spectrum of techniques such as Microcomputed Tomography (µCT), Scanning Electron Microscopy (SEM), Confocal Laser Scanning Microscopy (CLSM), and Light Microscopy. Additionally, these techniques have been used to correlate sponge architecture with mechanical properties using the concept of tensegrity, i.e., the feature of architectural structures that self-stabilize by balancing multidirectional, often opposing, tensile and compressive forces. A more detailed look at the structure of the sponge skeleton reveals that it is based on two elements: rigid siliceous spicules, chitin in in fibres with cementing collagen-type spongin material. The coexistence of these elements in the sponge structure determines the mechanical properties and, consequently, the sponge skeleton’s postulated tensegrity. Our observations indicate that the integrity of loose megascleres is realized by sponging material surrounding the bundles of spicules. Our distinction of skeletal elements was determined by the number of spicules in the bundle, the direction of spicule position relative to the main body axis, and the way the elements were connected. The arrangement of the bundles described above has important implications for the mechanical properties of the sponge skeleton and, consequently, for the tensegrity hypothesis.
- Open Access
Modeling of Nitrification Kinetics in a Respirometric Biosensor under Suboptimal Conditions
Sensitive detection with cell biosensors requires optimization of their working conditions and standardization of the response in variable physicochemical conditions. The introduction of an analyte to a sensor, which contributes to this variability, may account for the modeling of microbial metabolism. We constructed a multiparameter model of a water toxicity sensor of Automatic Biodetector for Water Toxicity (ABTOW), developed by our group and based on nitrifying bacteria. The model describes the kinetics of nitrification as a function of four orthogonal parameters: temperature, pH, oxygen and ammonium concentration. Furthermore, we characterized the signal-to-noise ratio (SNR) of the ABTOW readout as a function of these parameters. Thus, a region of parameter space corresponding to optimal ABTOW operation is identified and its sensitivity quantified. We applied the model to describe the ABTOW performance in non-equilibrium conditions produced by rapid changes in pH and temperature. In sum, the model based on four physicochemical parameters describes changes in the biosensor’s activity, the biological element of which are nitrifying bacteria characterized by simple chemolithoautotrophic metabolism. The description of reaction kinetics through multiparameter modeling in combination with stability analysis can find application in process control in biotechnology, biodetection and environmental research.
Open AccessModeling of Nitrification Kinetics in a Respirometric Biosensor under Suboptimal Conditions
Sensitive detection with cell biosensors requires optimization of their working conditions and standardization of the response in variable physicochemical conditions. The introduction of an analyte to a sensor, which contributes to this variability, may account for the modeling of microbial metabolism. We constructed a multiparameter model of a water toxicity sensor of Automatic Biodetector for Water Toxicity (ABTOW), developed by our group and based on nitrifying bacteria. The model describes the kinetics of nitrification as a function of four orthogonal parameters: temperature, pH, oxygen and ammonium concentration. Furthermore, we characterized the signal-to-noise ratio (SNR) of the ABTOW readout as a function of these parameters. Thus, a region of parameter space corresponding to optimal ABTOW operation is identified and its sensitivity quantified. We applied the model to describe the ABTOW performance in non-equilibrium conditions produced by rapid changes in pH and temperature. In sum, the model based on four physicochemical parameters describes changes in the biosensor’s activity, the biological element of which are nitrifying bacteria characterized by simple chemolithoautotrophic metabolism. The description of reaction kinetics through multiparameter modeling in combination with stability analysis can find application in process control in biotechnology, biodetection and environmental research.
- Open Access
Morphological Characteristics and Allometric Relationships of Shoot in Two Undergrowth Plants: Polygonatum odoratum and Polygonatum multiflorum
The main purpose of this investigation was to describe the spatial arrangement of shoot tissues, as seen in transverse section, and allometric relationships in two contrasting species of Polygonatum i.e., Polygonatum odoratum which commonly grows in mixed pine-oak forest with shoots rectangular in shape, and Polygonatum multiflorum found in oak-hornbeam forest with cylindrical shoots. The mass and length of the aerial shoots of each individual plant were measured. The shoot regions of each plant were then categorized as basal (b), central (c) or apical (a). Transverse sections of these shoot regions were subsequently cut, and the following parameters were measured: (1) Diameter of shoots, (2) thickness of the outer and inner zones of parenchyma and (3) thickness of the sclerenchyma zone. Additional allometric relationships between the various measurements were computed and determined as Pearson’s correlation coefficients (r). Both species of Polygonatum differed significantly with respect to the length, diameter and thickness of the outer zone of parenchyma. Shoots of P. multiflorum were taller but narrower than those of P. odoratum, which had a significantly wider zone of outer parenchyma. Allometric relationships were stronger for P. multiflorum, and for both species, they were generally stronger in the basal part of the shoot. We conclude that in P. multiflorum, the strong correlation between the diameter and length of the shoot seems to be important to the growth in shaded environments.
Open AccessMorphological Characteristics and Allometric Relationships of Shoot in Two Undergrowth Plants: Polygonatum odoratum and Polygonatum multiflorum
The main purpose of this investigation was to describe the spatial arrangement of shoot tissues, as seen in transverse section, and allometric relationships in two contrasting species of Polygonatum i.e., Polygonatum odoratum which commonly grows in mixed pine-oak forest with shoots rectangular in shape, and Polygonatum multiflorum found in oak-hornbeam forest with cylindrical shoots. The mass and length of the aerial shoots of each individual plant were measured. The shoot regions of each plant were then categorized as basal (b), central (c) or apical (a). Transverse sections of these shoot regions were subsequently cut, and the following parameters were measured: (1) Diameter of shoots, (2) thickness of the outer and inner zones of parenchyma and (3) thickness of the sclerenchyma zone. Additional allometric relationships between the various measurements were computed and determined as Pearson’s correlation coefficients (r). Both species of Polygonatum differed significantly with respect to the length, diameter and thickness of the outer zone of parenchyma. Shoots of P. multiflorum were taller but narrower than those of P. odoratum, which had a significantly wider zone of outer parenchyma. Allometric relationships were stronger for P. multiflorum, and for both species, they were generally stronger in the basal part of the shoot. We conclude that in P. multiflorum, the strong correlation between the diameter and length of the shoot seems to be important to the growth in shaded environments.
- Open Access
- 1 January 2013
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 12 (1) , 60
Mobile sailing robot for automatic estimation of fish density and monitoring water quality
The paper presents the methodology and the algorithm developed to analyze sonar images focused on fish detection in small water bodies and measurement of their parameters: volume, depth and the GPS location. The final results are stored in a table and can be exported to any numerical environment for further analysis. The measurement method for estimating the number of fish using the automatic robot is based on a sequential calculation of the number of occurrences of fish on the set trajectory. The data analysis from the sonar concerned automatic recognition of fish using the methods of image analysis and processing. Image analysis algorithm, a mobile robot together with its control in the 2.4 GHz band and full cryptographic communication with the data archiving station was developed as part of this study. For the three model fish ponds where verification of fish catches was carried out (548, 171 and 226 individuals), the measurement error for the described method was not exceeded 8%. Created robot together with the developed software has features for remote work also in the variety of harsh weather and environmental conditions, is fully automated and can be remotely controlled using Internet. Designed system enables fish spatial location (GPS coordinates and the depth). The purpose of the robot is a non-invasive measurement of the number of fish in water reservoirs and a measurement of the quality of drinking water consumed by humans, especially in situations where local sources of pollution could have a significant impact on the quality of water collected for water treatment for people and when getting to these places is difficult. The systematically used robot equipped with the appropriate sensors, can be part of early warning system against the pollution of water used by humans (drinking water, natural swimming pools) which can be dangerous for their health.
- 1 January 2013
- Published by Springer Nature in BioMedical Engineering OnLine
- Vol. 12 (1) , 60
Open AccessMobile sailing robot for automatic estimation of fish density and monitoring water quality
The paper presents the methodology and the algorithm developed to analyze sonar images focused on fish detection in small water bodies and measurement of their parameters: volume, depth and the GPS location. The final results are stored in a table and can be exported to any numerical environment for further analysis. The measurement method for estimating the number of fish using the automatic robot is based on a sequential calculation of the number of occurrences of fish on the set trajectory. The data analysis from the sonar concerned automatic recognition of fish using the methods of image analysis and processing. Image analysis algorithm, a mobile robot together with its control in the 2.4 GHz band and full cryptographic communication with the data archiving station was developed as part of this study. For the three model fish ponds where verification of fish catches was carried out (548, 171 and 226 individuals), the measurement error for the described method was not exceeded 8%. Created robot together with the developed software has features for remote work also in the variety of harsh weather and environmental conditions, is fully automated and can be remotely controlled using Internet. Designed system enables fish spatial location (GPS coordinates and the depth). The purpose of the robot is a non-invasive measurement of the number of fish in water reservoirs and a measurement of the quality of drinking water consumed by humans, especially in situations where local sources of pollution could have a significant impact on the quality of water collected for water treatment for people and when getting to these places is difficult. The systematically used robot equipped with the appropriate sensors, can be part of early warning system against the pollution of water used by humans (drinking water, natural swimming pools) which can be dangerous for their health.
- 29 January 2009
- Published by Springer Nature in Acta Biotheoretica
- Vol. 57 (3) , 331-348
Mathematical Modeling of Intrusive Growth of Fusiform Initials in Relation to Radial Growth and Expanding Cambial Circumference in Pinus sylvestris L.
This study on the cambium of Pinus sylvestris L. examines the intrusive growth of fusiform cambial initials and its possible contribution to the tangential and radial expansions of the cambial cylinder. The location and extent of intrusive growth of the fusiform initials were determined by microscopic observations and by mathematical modeling. In order to meet the required circumferential expansion of the cambial cylinder, the fusiform initials grow in groups by means of a symplastic rather than intrusive growth, leaving no room for the assumption that intrusive growth of the initials takes place between radial walls and has a direct role in the increase of the cambial circumference. Therefore, it is postulated that the fusiform initials grow intrusively between the tangential walls of the neighboring initials and their immediate derivatives and not between the radial walls of the adjacent initials as per common belief.
- 29 January 2009
- Published by Springer Nature in Acta Biotheoretica
- Vol. 57 (3) , 331-348
Mathematical Modeling of Intrusive Growth of Fusiform Initials in Relation to Radial Growth and Expanding Cambial Circumference in Pinus sylvestris L.
This study on the cambium of Pinus sylvestris L. examines the intrusive growth of fusiform cambial initials and its possible contribution to the tangential and radial expansions of the cambial cylinder. The location and extent of intrusive growth of the fusiform initials were determined by microscopic observations and by mathematical modeling. In order to meet the required circumferential expansion of the cambial cylinder, the fusiform initials grow in groups by means of a symplastic rather than intrusive growth, leaving no room for the assumption that intrusive growth of the initials takes place between radial walls and has a direct role in the increase of the cambial circumference. Therefore, it is postulated that the fusiform initials grow intrusively between the tangential walls of the neighboring initials and their immediate derivatives and not between the radial walls of the adjacent initials as per common belief.