Oluwatayo Racheal Onisuru
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oluwatayo Racheal Onisuru has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
Charles O. Oseghale
2 shared publicationsDele Peter Fapojuwo
2 shared publications- Reinout Meijboom
University of Johannesburg
2 shared publications - Christopher Nonso Chukwuati
University of Johannesburg, Auckland Park Campus, Johannesburg, 2006, South Africa
1 shared publication - Djemima Bulanga
Department of Chemical Engineering, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg 2028, South Africa
1 shared publication George Enebe
University of Johannesburg, Auckland Park Campus, Johannesburg, 2006, South Africa
1 shared publication
Latest Publications
- Open Access
Synergistic Al-MIL-53-(Mn) Bimetallic Metal–Organic Frameworks: Rational Tuning of Mn/Al Composition for Enhanced CO2 Capture
The development of bimetallic metal–organic frameworks (BMOFs) represents a promising strategy to meet critical requirements of CO2 capture in flue gas, where CO2 exists at low partial pressure (0.15 bar, 298–333 K) due to the synergistic effects of mixed-metal incorporation that can enhance stability and CO2 affinity. In this study, aluminum and manganese were coordinated on terephthalic acid to produce a series of bimetallic Al-MIL-53-(Mn) with varying Mn/Al molar ratios. These samples were synthesized via a hydrothermal approach, followed by a two-step activation, and characterized using FTIR, PXRD, SEM-EDX, TGA, and the BET method to uncover fundamental CO2 adsorption characteristics. All samples exhibited MIL-53 features, including a predominant microporous structure, the presence of hydroxyl bridging groups in the surface chemistry, a rhomboidal morphology that supports their breathing behavior, and high thermal stability. The textural properties and the crystallinity were enhanced with increased mixed-metal ratios (Mn/Al = 0.15, 0.45, 0.65), and the findings revealed structural destabilization at a high molar ratio (Mn/Al = 0.85). Besides the 77 K low-pressure N2 isotherms, CO2 isotherms measured at a screening temperature of 273 K demonstrated a maximum uptake of 3.03 mmol/g, which compares favorably with the 2.19–2.85 mmol/g reported in the literature for pristine MIL-53(Al). They revealed a consistent Type I Langmuir isotherm with a steep uptake at low partial pressure, which suggests the presence of strong preferential binding sites for CO2 on the surface of bimetallic MOFs. As this is a screening study, the bulk Mn content (ICP-OES), the CO2/N2 selectivity derived from 273 K and 298 K isotherms, the performance at flue-gas temperatures (313–333 K) and moisture tolerance remain to be established.
Open AccessSynergistic Al-MIL-53-(Mn) Bimetallic Metal–Organic Frameworks: Rational Tuning of Mn/Al Composition for Enhanced CO2 Capture
The development of bimetallic metal–organic frameworks (BMOFs) represents a promising strategy to meet critical requirements of CO2 capture in flue gas, where CO2 exists at low partial pressure (0.15 bar, 298–333 K) due to the synergistic effects of mixed-metal incorporation that can enhance stability and CO2 affinity. In this study, aluminum and manganese were coordinated on terephthalic acid to produce a series of bimetallic Al-MIL-53-(Mn) with varying Mn/Al molar ratios. These samples were synthesized via a hydrothermal approach, followed by a two-step activation, and characterized using FTIR, PXRD, SEM-EDX, TGA, and the BET method to uncover fundamental CO2 adsorption characteristics. All samples exhibited MIL-53 features, including a predominant microporous structure, the presence of hydroxyl bridging groups in the surface chemistry, a rhomboidal morphology that supports their breathing behavior, and high thermal stability. The textural properties and the crystallinity were enhanced with increased mixed-metal ratios (Mn/Al = 0.15, 0.45, 0.65), and the findings revealed structural destabilization at a high molar ratio (Mn/Al = 0.85). Besides the 77 K low-pressure N2 isotherms, CO2 isotherms measured at a screening temperature of 273 K demonstrated a maximum uptake of 3.03 mmol/g, which compares favorably with the 2.19–2.85 mmol/g reported in the literature for pristine MIL-53(Al). They revealed a consistent Type I Langmuir isotherm with a steep uptake at low partial pressure, which suggests the presence of strong preferential binding sites for CO2 on the surface of bimetallic MOFs. As this is a screening study, the bulk Mn content (ICP-OES), the CO2/N2 selectivity derived from 273 K and 298 K isotherms, the performance at flue-gas temperatures (313–333 K) and moisture tolerance remain to be established.
- Open Access
- 10 June 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 219, 259-271
Push button, automated flow synthesis of biaryls and stilbenes using palladium-catalysed cross-coupling reactions
- 10 June 2025
- Published by Elsevier in Chemical Engineering Research and Design
- Vol. 219, 259-271
Open AccessPush button, automated flow synthesis of biaryls and stilbenes using palladium-catalysed cross-coupling reactions
- Open Access
- 30 May 2024
- Published by Elsevier in Environmental Technology & Innovation
- Vol. 35, 103700
The development and application of Cu@TiO2@SAPO-34 as better photocatalyst towards degradation of various pollutants
- 30 May 2024
- Published by Elsevier in Environmental Technology & Innovation
- Vol. 35, 103700
Open AccessThe development and application of Cu@TiO2@SAPO-34 as better photocatalyst towards degradation of various pollutants
- Open Access
- 6 July 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (31) , 19890-19900
Transfer hydrogenation of ketone; an in situ approach toward an eco-friendly reduction
The use of water as a solvent in chemical reactions has recently been brought to public attention, especially in the exploration of eco-friendly procedures. It is readily available, abundantly accessible, non-toxic, non-flammable, and at a low cost. As opposed to the previous limitation of reactant solubilities associated with aqueous media, a hydrogel such as a hydroxypropyl methylcellulose (HPMC) solution can significantly improve the reactant solubility. This investigation employed water and HPMC as the reaction solvent, and the reaction medium viscosity was impressively enhanced. Silica-supported Pd particles (Pd@SiO2) were synthesized and effectively catalyzed the reduction of acetophenone in the presence of sodium borohydride (NaBH4) as the hydrogen source. The conversion of acetophenone to 1-phenyl ethanol remained at a very high value of >99.34% with 100% selectivity towards 1-phenyl ethanol.
- 6 July 2022
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 12 (31) , 19890-19900
Open AccessTransfer hydrogenation of ketone; an in situ approach toward an eco-friendly reduction
The use of water as a solvent in chemical reactions has recently been brought to public attention, especially in the exploration of eco-friendly procedures. It is readily available, abundantly accessible, non-toxic, non-flammable, and at a low cost. As opposed to the previous limitation of reactant solubilities associated with aqueous media, a hydrogel such as a hydroxypropyl methylcellulose (HPMC) solution can significantly improve the reactant solubility. This investigation employed water and HPMC as the reaction solvent, and the reaction medium viscosity was impressively enhanced. Silica-supported Pd particles (Pd@SiO2) were synthesized and effectively catalyzed the reduction of acetophenone in the presence of sodium borohydride (NaBH4) as the hydrogen source. The conversion of acetophenone to 1-phenyl ethanol remained at a very high value of >99.34% with 100% selectivity towards 1-phenyl ethanol.