Jin Hou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jin Hou has a total of 147 co-authors. Here are the top co-authors by number of shared publications:
- Aditya D. Mohite
Department of Chemical and Biomolecular Engineering, Rice University, Houston, USA
12 shared publications - Mercouri G. Kanatzidis
Northwestern University
10 shared publications - Jacky Even
Univ Rennes, INSA Rennes, CNRS, Institut FOTON - UMR 6082, Rennes, France
9 shared publications - Claudine Katan
Univ Rennes
8 shared publications Isaac Metcalf
6 shared publications- Hao Zhang
Department of Chemical and Biomolecular Engineering, Rice University, Houston, TX 77005, USA
5 shared publications
Latest Publications
- 27 July 2026
- Published by Springer Nature in Nature
- Vol. 657 (8130) , 121-126
Phase-homogeneous mixed-halide perovskites for stable tandem photovoltaics
- 27 July 2026
- Published by Springer Nature in Nature
- Vol. 657 (8130) , 121-126
Phase-homogeneous mixed-halide perovskites for stable tandem photovoltaics
- 16 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (7) , 975-988
Synthetic routes to advancing perovskite solar cells through interface design
- 16 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (7) , 975-988
Synthetic routes to advancing perovskite solar cells through interface design
- 2 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1254-1268
Exciton diffusion beyond 2 μm enabled by maximum symmetry in two-dimensional perovskites
- 2 April 2026
- Published by Springer Nature in Nature Synthesis
- Vol. 5 (8) , 1254-1268
Exciton diffusion beyond 2 μm enabled by maximum symmetry in two-dimensional perovskites
- 6 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (6) , 3014
Correction to “Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites”
- 6 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (6) , 3014
Correction to “Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites”
- 3 December 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (24) , 9869-9885
Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites
- 3 December 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 37 (24) , 9869-9885
Polymorphism and Phase Control in Dion–Jacobson 2D 3-(Aminomethyl)piperidinium-Based Metal Iodide Perovskites
- Open Access
- 30 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1)
Multimode phonon-polaritons in lead-halide perovskites in the ultrastrong coupling regime
Phonons play a central role in fundamental solid-state phenomena, including superconductivity, Raman scattering, and symmetry-breaking phases. Harnessing phonons to control these effects and enable quantum technologies is therefore of great interest. However, most existing phonon control strategies rely on external driving fields or anharmonic interactions, limiting their applicability. Here, we realize multimode ultrastrong light–matter coupling and theoretically show the modulation of phonon emission. This regime is realized by coupling two optical phonon modes in lead halide perovskites to a nanoslot array functioning as a single-mode cavity. The small mode volume of the nanoslots enables high coupling strengths in the phonon-polariton system. We show theoretically that the nanoslot resonator mediates an effective interaction between phonon modes, leading to superthermal phonon bunching in thermal equilibrium between distinct modes. Our findings are well described by a multimodal Hopfield model. This work establishes a pathway for engineering phononic properties for light-harvesting and light-emitting technologies.
- 30 September 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1)
Open AccessMultimode phonon-polaritons in lead-halide perovskites in the ultrastrong coupling regime
Phonons play a central role in fundamental solid-state phenomena, including superconductivity, Raman scattering, and symmetry-breaking phases. Harnessing phonons to control these effects and enable quantum technologies is therefore of great interest. However, most existing phonon control strategies rely on external driving fields or anharmonic interactions, limiting their applicability. Here, we realize multimode ultrastrong light–matter coupling and theoretically show the modulation of phonon emission. This regime is realized by coupling two optical phonon modes in lead halide perovskites to a nanoslot array functioning as a single-mode cavity. The small mode volume of the nanoslots enables high coupling strengths in the phonon-polariton system. We show theoretically that the nanoslot resonator mediates an effective interaction between phonon modes, leading to superthermal phonon bunching in thermal equilibrium between distinct modes. Our findings are well described by a multimodal Hopfield model. This work establishes a pathway for engineering phononic properties for light-harvesting and light-emitting technologies.
- Open Access
- 14 August 2025
- Vol. 122 (33)
Keldysh tuning of photoluminescence in a lead halide perovskite crystal.
In 1964, Keldysh laid the groundwork for strong-field physics in atomic, molecular, and solid-state systems by delineating a ubiquitous transition from multiphoton absorption to classical field-driven electron tunneling under intense electromagnetic waves. While both processes in semiconductors can generate carriers and result in photon emission through electron-hole recombination, the low quantum yields in most materials have hindered direct observation of the Keldysh crossover. Leveraging the large quantum yields of photoluminescence in lead halide perovskites, we show that we can not only induce bright light emission from extreme subbandgap excitation but also distinguish between photon-induced and electric-field-induced processes. Our results span the transition between quantum-mechanical and classical field effects of the light and provide generalizable insights into the nonequilibrium dynamics that result from strong-field light-matter interactions. The findings also open avenues for light upconversion and subbandgap photon detection, highlighting the potential of lead halide perovskites in advanced optoelectronic applications.
- 14 August 2025
- Vol. 122 (33)
Open AccessKeldysh tuning of photoluminescence in a lead halide perovskite crystal.
In 1964, Keldysh laid the groundwork for strong-field physics in atomic, molecular, and solid-state systems by delineating a ubiquitous transition from multiphoton absorption to classical field-driven electron tunneling under intense electromagnetic waves. While both processes in semiconductors can generate carriers and result in photon emission through electron-hole recombination, the low quantum yields in most materials have hindered direct observation of the Keldysh crossover. Leveraging the large quantum yields of photoluminescence in lead halide perovskites, we show that we can not only induce bright light emission from extreme subbandgap excitation but also distinguish between photon-induced and electric-field-induced processes. Our results span the transition between quantum-mechanical and classical field effects of the light and provide generalizable insights into the nonequilibrium dynamics that result from strong-field light-matter interactions. The findings also open avenues for light upconversion and subbandgap photon detection, highlighting the potential of lead halide perovskites in advanced optoelectronic applications.
- Open Access
- 21 May 2025
- Published by Springer Nature in Research Square
Two-dimensional perovskites with maximum symmetry enable exciton diffusion length exceeding 2 micrometers
Realizing semiconductors with high symmetry of their crystallographic structures has been a virtue of inorganic materials and has resulted in novel physical behaviors. In contrast, hybrid (organic and inorganic) crystals such as two-dimensional metal halide perovskites exhibit much lower crystal symmetry due to in-plane or out-of-plane octahedral distortions. Despite their amazing ability for photoinduced light emission at room temperature, the Achilles' heel of this attractive class of 2D materials for optoelectronics remains the poor control and lack of performance for charge carrier transport. Inspired by the tremendous charge carrier properties of the 3D cubic perovskite phase (α) of FAPbI₃ and combining the use of the appropriate cage cation, the spacer molecule and the temperature and rate of crystallization, we report a new series of FA-based layered two-dimensional perovskites that exhibits the highest theoretically predicted symmetry with a tetragonal P4/mmm space group, resulting in no octahedral distortion in both in-plane and out-of-plane directions. These 2D perovskites present the shortest interlayer distances (4 Å), which results in systematically lower bandgaps (1.7 to 1.8 eV). Finally, the absence of octahedral distortions, results in an exciton diffusion length of 2.5 µm, and a diffusivity of 4.4 cm2s-1, both of which are an order of magnitude larger compared to previously reported 2D perovskites and on par with monolayer transition metal dichalcogenides.
- 21 May 2025
- Published by Springer Nature in Research Square
Open AccessTwo-dimensional perovskites with maximum symmetry enable exciton diffusion length exceeding 2 micrometers
Realizing semiconductors with high symmetry of their crystallographic structures has been a virtue of inorganic materials and has resulted in novel physical behaviors. In contrast, hybrid (organic and inorganic) crystals such as two-dimensional metal halide perovskites exhibit much lower crystal symmetry due to in-plane or out-of-plane octahedral distortions. Despite their amazing ability for photoinduced light emission at room temperature, the Achilles' heel of this attractive class of 2D materials for optoelectronics remains the poor control and lack of performance for charge carrier transport. Inspired by the tremendous charge carrier properties of the 3D cubic perovskite phase (α) of FAPbI₃ and combining the use of the appropriate cage cation, the spacer molecule and the temperature and rate of crystallization, we report a new series of FA-based layered two-dimensional perovskites that exhibits the highest theoretically predicted symmetry with a tetragonal P4/mmm space group, resulting in no octahedral distortion in both in-plane and out-of-plane directions. These 2D perovskites present the shortest interlayer distances (4 Å), which results in systematically lower bandgaps (1.7 to 1.8 eV). Finally, the absence of octahedral distortions, results in an exciton diffusion length of 2.5 µm, and a diffusivity of 4.4 cm2s-1, both of which are an order of magnitude larger compared to previously reported 2D perovskites and on par with monolayer transition metal dichalcogenides.
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (35) , 46560-46569
Vapor Growth of All-Inorganic 2D Ruddlesden–Popper Lead- and Tin-Based Perovskites
The 2D Ruddlesden-Popper (RP) perovskites Cs2PbI2Cl2 (Pb-based, n = 1) and Cs2SnI2Cl2 (Sn-based, n = 1) stand out as unique and rare instances of entirely inorganic constituents within the more expansive category of organic/inorganic 2D perovskites. These materials have recently garnered significant attention for their strong UV-light responsiveness, exceptional thermal stability, and theoretically predicted ultrahigh carrier mobility. In this study, we synthesized Pb and Sn-based n = 1 2D RP perovskite films covering millimeter-scale areas for the first time, utilizing a one-step chemical vapor deposition (CVD) method under atmospheric conditions. These films feature perovskite layers oriented horizontally relative to the substrate. Multilayered Cs3Pb2I3Cl4 (Pb-based, n = 2) and Cs3Sn2I3Cl4 (Sn-based, n = 2) films were also obtained for the first time, and their crystallographic structures were refined by combining X-ray diffraction (XRD) and density functional theory (DFT) calculations. DFT calculations and experimental optical spectroscopy support band-gap energy shifts related to the perovskite layer thickness. We demonstrate bias-free photodetectors using the Sn-based, n = 1 perovskite with reproducible photocurrent and a fast 84 ms response time. The present work not only demonstrates the growth of high-quality all-inorganic multilayered 2D perovskites via the CVD method but also suggests their potential as promising candidates for future optoelectronic applications.
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (35) , 46560-46569
Vapor Growth of All-Inorganic 2D Ruddlesden–Popper Lead- and Tin-Based Perovskites
The 2D Ruddlesden-Popper (RP) perovskites Cs2PbI2Cl2 (Pb-based, n = 1) and Cs2SnI2Cl2 (Sn-based, n = 1) stand out as unique and rare instances of entirely inorganic constituents within the more expansive category of organic/inorganic 2D perovskites. These materials have recently garnered significant attention for their strong UV-light responsiveness, exceptional thermal stability, and theoretically predicted ultrahigh carrier mobility. In this study, we synthesized Pb and Sn-based n = 1 2D RP perovskite films covering millimeter-scale areas for the first time, utilizing a one-step chemical vapor deposition (CVD) method under atmospheric conditions. These films feature perovskite layers oriented horizontally relative to the substrate. Multilayered Cs3Pb2I3Cl4 (Pb-based, n = 2) and Cs3Sn2I3Cl4 (Sn-based, n = 2) films were also obtained for the first time, and their crystallographic structures were refined by combining X-ray diffraction (XRD) and density functional theory (DFT) calculations. DFT calculations and experimental optical spectroscopy support band-gap energy shifts related to the perovskite layer thickness. We demonstrate bias-free photodetectors using the Sn-based, n = 1 perovskite with reproducible photocurrent and a fast 84 ms response time. The present work not only demonstrates the growth of high-quality all-inorganic multilayered 2D perovskites via the CVD method but also suggests their potential as promising candidates for future optoelectronic applications.
- Top Cited Papers
- 14 June 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 384 (6701) , 1227-1235
Two-dimensional perovskite templates for durable, efficient formamidinium perovskite solar cells
We present a design strategy for fabricating ultrastable phase-pure films of formamidinium lead iodide (FAPbI 3 ) by lattice templating using specific two-dimensional (2D) perovskites with FA as the cage cation. When a pure FAPbI 3 precursor solution is brought in contact with the 2D perovskite, the black phase forms preferentially at 100°C, much lower than the standard FAPbI 3 annealing temperature of 150°C. X-ray diffraction and optical spectroscopy suggest that the resulting FAPbI 3 film compresses slightly to acquire the (011) interplanar distances of the 2D perovskite seed. The 2D-templated bulk FAPbI 3 films exhibited an efficiency of 24.1% in a p-i-n architecture with 0.5–square centimeter active area and an exceptional durability, retaining 97% of their initial efficiency after 1000 hours under 85°C and maximum power point tracking.
- 14 June 2024
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 384 (6701) , 1227-1235
Top Cited PapersTwo-dimensional perovskite templates for durable, efficient formamidinium perovskite solar cells
We present a design strategy for fabricating ultrastable phase-pure films of formamidinium lead iodide (FAPbI 3 ) by lattice templating using specific two-dimensional (2D) perovskites with FA as the cage cation. When a pure FAPbI 3 precursor solution is brought in contact with the 2D perovskite, the black phase forms preferentially at 100°C, much lower than the standard FAPbI 3 annealing temperature of 150°C. X-ray diffraction and optical spectroscopy suggest that the resulting FAPbI 3 film compresses slightly to acquire the (011) interplanar distances of the 2D perovskite seed. The 2D-templated bulk FAPbI 3 films exhibited an efficiency of 24.1% in a p-i-n architecture with 0.5–square centimeter active area and an exceptional durability, retaining 97% of their initial efficiency after 1000 hours under 85°C and maximum power point tracking.