Sahaya Infant Lasalle Britto
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sahaya Infant Lasalle Britto has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
Muthu Senthil Pandian
12 shared publicationsP. Ramasamy
Department of Physics, SSN Research Centre, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, India
12 shared publications- Muthu Senthil Pandian
Department of Physics, SSN Research Centre, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkan, India
9 shared publications - Alexandar Antonysamy
Department of Physics, St. Joseph’s College (Autonomous), Tiruchirappalli 620002, Tamil Nadu, India
5 shared publications P. Karuppasamy
Department of Physics, SSN Research Centre, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, India
4 shared publicationsD. Saravanakkumar
PG and Research Department of Physics, Thiagarajar College (Autonomous) (Affiliated to Madurai Kamaraj University-Madurai), Theppakulam, India
2 shared publications
Latest Publications
- 14 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70148
Experimental Growth and Computational Insights Into 2‐aminopyridinium Hexafluorosilicate (2APHFS) Single Crystal for Advanced Material Applications
A single crystal of 2‐aminopyridinium hexafluorosilicate (2APHFS) was grown using methanol as the solvent through the slow evaporation solution growth technique (SEST). The 2APHFS crystallizes in the monoclinic system with a C2/c space group. The presence of functional groups and their vibrational characteristics were confirmed through FTIR spectroscopy. The UV–vis–NIR spectra confirm the peak at 340 nm with the lower cutoff wavelength. The optical bandgap energy value of grown 2APHFS crystal is 3.35 eV. Vickers microhardness is used to identify the mechanical property of the material. Thermal stability of the materials is concluded by Thermogravimetric differential thermal analysis (TGDTA). 1 H NMR and 13 C NMR are used to interpret the molecular structure of the material. The third‐order nonlinear susceptibility was measured by Z‐Scan analysis with a (He‐Ne) laser at a wavelength of 632.8 nm. The optimization of the molecular structure, HOMO and LUMO, NBO analysis, molecular potential, and molecular geometry are examined by Gaussian 09w software.
- 14 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70148
Experimental Growth and Computational Insights Into 2‐aminopyridinium Hexafluorosilicate (2APHFS) Single Crystal for Advanced Material Applications
A single crystal of 2‐aminopyridinium hexafluorosilicate (2APHFS) was grown using methanol as the solvent through the slow evaporation solution growth technique (SEST). The 2APHFS crystallizes in the monoclinic system with a C2/c space group. The presence of functional groups and their vibrational characteristics were confirmed through FTIR spectroscopy. The UV–vis–NIR spectra confirm the peak at 340 nm with the lower cutoff wavelength. The optical bandgap energy value of grown 2APHFS crystal is 3.35 eV. Vickers microhardness is used to identify the mechanical property of the material. Thermal stability of the materials is concluded by Thermogravimetric differential thermal analysis (TGDTA). 1 H NMR and 13 C NMR are used to interpret the molecular structure of the material. The third‐order nonlinear susceptibility was measured by Z‐Scan analysis with a (He‐Ne) laser at a wavelength of 632.8 nm. The optimization of the molecular structure, HOMO and LUMO, NBO analysis, molecular potential, and molecular geometry are examined by Gaussian 09w software.
- 11 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70153
Growth and Investigation of the Nonlinear Optical Electrical and Antibacterial Properties of Organic Single Crystal: P‐Toluidinium p‐Toluenesulfonate
Single crystals of the organic nonlinear optical (NLO) material p‐Toluidinium p‐toluenesulfonate (PTPTSA) were grown from ethanol by the slow evaporation method at room temperature. The transparent, well‐faceted crystals indicate good optical quality. Single‐crystal X‐ray diffraction revealed that PTPTSA crystallizes in the monoclinic system with non‐centrosymmetric space group P2 1 . The crystalline nature was further confirmed by powder X‐ray diffraction analysis. FTIR spectroscopy identified the functional groups present in the crystal. UV‐Vis‐NIR studies were used to determine the absorption coefficient, optical bandgap, and refractive index, while photoluminescence analysis showed an emission peak at 570 nm. Photoconductivity measurements revealed negative photoconductive behavior. Dielectric studies, including dielectric constant, dielectric loss, and AC conductivity, were carried out as a function of frequency to evaluate the electrical properties of the crystal. Electronic polarizability was estimated using Penn's model and the Clausius–Mossotti equation. Third‐order nonlinear optical parameters were determined using the Z‐scan technique. Furthermore, for the first time, the PTPTSA crystal was evaluated against human pathogenic bacteria, namely Streptococcus aureus , Streptococcus pneumoniae , Klebsiella pneumoniae , and Escherichia coli .
- 11 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70153
Growth and Investigation of the Nonlinear Optical Electrical and Antibacterial Properties of Organic Single Crystal: P‐Toluidinium p‐Toluenesulfonate
Single crystals of the organic nonlinear optical (NLO) material p‐Toluidinium p‐toluenesulfonate (PTPTSA) were grown from ethanol by the slow evaporation method at room temperature. The transparent, well‐faceted crystals indicate good optical quality. Single‐crystal X‐ray diffraction revealed that PTPTSA crystallizes in the monoclinic system with non‐centrosymmetric space group P2 1 . The crystalline nature was further confirmed by powder X‐ray diffraction analysis. FTIR spectroscopy identified the functional groups present in the crystal. UV‐Vis‐NIR studies were used to determine the absorption coefficient, optical bandgap, and refractive index, while photoluminescence analysis showed an emission peak at 570 nm. Photoconductivity measurements revealed negative photoconductive behavior. Dielectric studies, including dielectric constant, dielectric loss, and AC conductivity, were carried out as a function of frequency to evaluate the electrical properties of the crystal. Electronic polarizability was estimated using Penn's model and the Clausius–Mossotti equation. Third‐order nonlinear optical parameters were determined using the Z‐scan technique. Furthermore, for the first time, the PTPTSA crystal was evaluated against human pathogenic bacteria, namely Streptococcus aureus , Streptococcus pneumoniae , Klebsiella pneumoniae , and Escherichia coli .
- 7 August 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (9) , 849
Multifunctional 1,2,3-benzotriazolium dihydrogen phosphate single crystal: a potential candidate for nonlinear optical and biomedical applications
- 7 August 2026
- Published by Springer Nature in Applied Physics A
- Vol. 132 (9) , 849
Multifunctional 1,2,3-benzotriazolium dihydrogen phosphate single crystal: a potential candidate for nonlinear optical and biomedical applications
- 5 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70137
Design and Growth of Piperazine‐1,4‐diium Bis (Salicylate) Crystals Toward Efficient Third‐Order Nonlinear Optical Applications
Single crystals of Piperazine‐1,4‐diium bis (salicylate) (PSA) were grown successfully at room temperature using the slow evaporation solution method, with methanol as the solvent. The crystal structural parameters (unit cell and space group) were determined by single‐crystal XRD. Hirshfeld surface analysis was then employed to visualize and to understand the types and strengths of intermolecular interactions present in the crystal lattice. Optical properties were studied through UV–Vis NIR absorption measurements, which revealed that the crystal exhibits strong transparency in the 410–1100 nm wavelength range, and this is an important factor for optical applications. The presence of various functional groups in the PSA crystal was confirmed using Fourier‐transform infrared (FTIR) spectroscopy. Photoluminescence analysis revealed distinct emission peaks corresponding to ultraviolet (UV) light, indicating strong UV luminescence behavior. The electrical properties of the PSA crystal showed a low density of defects and a low value of dielectric loss found from the dielectric studies. Additionally, the mechanical stability of the crystal was examined using Vickers microhardness testing. The antibacterial activity of the PSA material was evaluated to explore its potential biomedical applications. To explore its potential in laser applications, the laser damage threshold (LDT) was measured using a single‐shot Nd: YAG laser at 532 nm. Moreover, third‐order nonlinear optical (NLO) parameters such as the nonlinear refractive index (n 2 ), nonlinear absorption coefficient (β), and third‐order susceptibility (χ ( 3 ) ) were examined using the Z‐scan method with a continuous‐wave (CW) solid‐state laser operating at a wavelength of 632.8 nm. These findings suggest that the PSA crystals could serve as promising materials for use in photonics and nonlinear optical devices.
- 5 August 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (8) , e70137
Design and Growth of Piperazine‐1,4‐diium Bis (Salicylate) Crystals Toward Efficient Third‐Order Nonlinear Optical Applications
Single crystals of Piperazine‐1,4‐diium bis (salicylate) (PSA) were grown successfully at room temperature using the slow evaporation solution method, with methanol as the solvent. The crystal structural parameters (unit cell and space group) were determined by single‐crystal XRD. Hirshfeld surface analysis was then employed to visualize and to understand the types and strengths of intermolecular interactions present in the crystal lattice. Optical properties were studied through UV–Vis NIR absorption measurements, which revealed that the crystal exhibits strong transparency in the 410–1100 nm wavelength range, and this is an important factor for optical applications. The presence of various functional groups in the PSA crystal was confirmed using Fourier‐transform infrared (FTIR) spectroscopy. Photoluminescence analysis revealed distinct emission peaks corresponding to ultraviolet (UV) light, indicating strong UV luminescence behavior. The electrical properties of the PSA crystal showed a low density of defects and a low value of dielectric loss found from the dielectric studies. Additionally, the mechanical stability of the crystal was examined using Vickers microhardness testing. The antibacterial activity of the PSA material was evaluated to explore its potential biomedical applications. To explore its potential in laser applications, the laser damage threshold (LDT) was measured using a single‐shot Nd: YAG laser at 532 nm. Moreover, third‐order nonlinear optical (NLO) parameters such as the nonlinear refractive index (n 2 ), nonlinear absorption coefficient (β), and third‐order susceptibility (χ ( 3 ) ) were examined using the Z‐scan method with a continuous‐wave (CW) solid‐state laser operating at a wavelength of 632.8 nm. These findings suggest that the PSA crystals could serve as promising materials for use in photonics and nonlinear optical devices.
- 21 June 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1375
Growth and Characterization of 2,4,6-Triaminopyrimidinium 2- Hydroxybenzoate Single Crystal (TPS) for NLO Applications
- 21 June 2026
- Published by Elsevier in Journal of Molecular Structure
- Vol. 1375
Growth and Characterization of 2,4,6-Triaminopyrimidinium 2- Hydroxybenzoate Single Crystal (TPS) for NLO Applications
- 31 March 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (4)
Structural, Optical, and Electrical Studies of Maleic Acid Single Crystals for Nonlinear Optical Applications
Single crystals of maleic acid (MA) were synthesized and thoroughly characterized to evaluate their structural and various technical characterizations. The nucleation and growth behavior were monitored and recorded via optical microscopy for a better understanding of the crystallization process. PXRD established the crystalline phase and purity of the material, while FTIR spectrographic analysis revealed the existence of functional assemblies, offering insight into molecular interactions within the crystal lattice. UV–vis NIR spectral examination demonstrated good optical transparency, suggesting the crystal's potential for optoelectronic applications. Dielectric measurements provided information on the dielectric constant and loss, which are important for its integration into electronic devices. The photoconductivity study revealed a photo‐responsive electrical behavior, and impedance spectroscopy offered valuable data on the charge transport dynamics. Additionally, electrochemical analysis was performed to examine the crystal's stability and reactivity. Importantly, Z‐scan measurements confirmed the presence of significant third‐order NLO behavior, underscoring its use in advanced photonic and laser‐based systems. Overall, these comprehensive characterizations highlight the versatility of maleic acid single crystals for a wide range of NLO and functional device applications.
- 31 March 2026
- Published by Wiley in Crystal Research and Technology
- Vol. 61 (4)
Structural, Optical, and Electrical Studies of Maleic Acid Single Crystals for Nonlinear Optical Applications
Single crystals of maleic acid (MA) were synthesized and thoroughly characterized to evaluate their structural and various technical characterizations. The nucleation and growth behavior were monitored and recorded via optical microscopy for a better understanding of the crystallization process. PXRD established the crystalline phase and purity of the material, while FTIR spectrographic analysis revealed the existence of functional assemblies, offering insight into molecular interactions within the crystal lattice. UV–vis NIR spectral examination demonstrated good optical transparency, suggesting the crystal's potential for optoelectronic applications. Dielectric measurements provided information on the dielectric constant and loss, which are important for its integration into electronic devices. The photoconductivity study revealed a photo‐responsive electrical behavior, and impedance spectroscopy offered valuable data on the charge transport dynamics. Additionally, electrochemical analysis was performed to examine the crystal's stability and reactivity. Importantly, Z‐scan measurements confirmed the presence of significant third‐order NLO behavior, underscoring its use in advanced photonic and laser‐based systems. Overall, these comprehensive characterizations highlight the versatility of maleic acid single crystals for a wide range of NLO and functional device applications.
- 2 December 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (31)
Growth and optical limiting properties of oxalic acid dihydrate crystals for photonic applications
The oxalic acid dihydrate (OAD) single crystal has been successfully grown by the slow evaporation solution technique (SEST) by water as a solvent. Crystals reaching a maximum size of [ ] were obtained, with their nucleation and growth processes visually documented. Using powder XRD analysis, Miller index and (h k l) planes were identified. The FTIR analysis was conducted on the OAD crystal to find out the OAD functional groups. UV–Vis–NIR studies showed high transparency in the 300–1100[ ]nm range, with an optical band gap of 5.2[ ]eV. Photoluminescence (PL) studies indicated the potential suitability of the material for LED applications. Dielectric measurements were performed to analyze the frequency dependence of the dielectric constant and loss. Negative photoconductivity was also observed, highlighting its relevance for optoelectronic devices. Surface morphology was examined using chemical etching and scanning electron microscopy (SEM). Furthermore, Z-scan analysis confirmed the presence of two-photon absorption and effective optical limiting behavior, supporting the application of OAD crystals in laser safety and nonlinear optical devices.
- 2 December 2025
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 39 (31)
Growth and optical limiting properties of oxalic acid dihydrate crystals for photonic applications
The oxalic acid dihydrate (OAD) single crystal has been successfully grown by the slow evaporation solution technique (SEST) by water as a solvent. Crystals reaching a maximum size of [ ] were obtained, with their nucleation and growth processes visually documented. Using powder XRD analysis, Miller index and (h k l) planes were identified. The FTIR analysis was conducted on the OAD crystal to find out the OAD functional groups. UV–Vis–NIR studies showed high transparency in the 300–1100[ ]nm range, with an optical band gap of 5.2[ ]eV. Photoluminescence (PL) studies indicated the potential suitability of the material for LED applications. Dielectric measurements were performed to analyze the frequency dependence of the dielectric constant and loss. Negative photoconductivity was also observed, highlighting its relevance for optoelectronic devices. Surface morphology was examined using chemical etching and scanning electron microscopy (SEM). Furthermore, Z-scan analysis confirmed the presence of two-photon absorption and effective optical limiting behavior, supporting the application of OAD crystals in laser safety and nonlinear optical devices.