Cen Zeng

This paper investigates the stability issues of the Unmanned Surface Vehicle (USV)–Unmanned Underwater Vehicle (ROV) system induced by cable loads under real marine conditions and high-speed operation. This study focuses on the dynamic coupling characteristics of cable forces affecting the unmanned platform and outlines the variation patterns of these forces under different operational scenarios. By developing the dynamic models of the USV, UC, and UUV, a comprehensive system model for the unmanned marine platform is constructed. The accuracy of the cable model is validated through experimental results, and the coupling interference effects of the cable during collaborative operations are systematically analyzed from multiple perspectives. Additionally, the cable tension and force behaviors under high-speed cruising conditions are thoroughly examined. The results provide a solid foundation for the development of cable load prediction models for collaborative marine unmanned platforms, and offer both theoretical and numerical insights for dynamic control strategies based on cable force adjustments.

The aim of local path planning for unmanned surface vehicles (USVs) is to avoid unknown dynamic or static obstacles. However, current relative studies have not fully considered the impact of ocean environmental factors which significantly increase the control difficulty and collision risk of USVs. Therefore, this work studies two ocean environmental factors, namely, wave and current, given that they both have a significant impact on USVs. Furthermore, we redesign a kinematic model of an USV and the evaluation function of a classical and practical local path planning method based on the dynamic window approach (DWA). As shown by the results of the simulations, the path length was impacted mainly by the intensity of the environmental load and slightly by the direction of the environmental load, but the navigation time was significantly influenced by both. Taking the situation in still water as a benchmark in terms of the intensity and direction of the environmental factors, the maximum change rates of the path length were 8.6% and 0.6%, respectively, but the maximum change rates of the navigating time were 17.9% and 25.6%, separately. In addition, the average calculation time of each cycle was only 0.0418 s, and the longest time did not exceed the simulation time corresponding to a single cycle of 0.1 s. This method has proven to be a good candidate for real-time local path planning of USVs since it systematically considers the impact of waves and currents on the navigation of USVs, and thus ensures that USVs can adjust to the planned path in time and avoid obstacles when navigating in the real ocean environment.