XGXiyu Gu

Xiyu Gu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiyu Gu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-Sensitivity Solidly Mounted Resonator Load Sensor Based on AlN/AlScN Heterostructure

    by Wanqing Zuo, Xiyu Gu, Tingting Yang, Qinwen Xu, Haiyang Li, Yao Cai, Chengliang Sun

    Bulk acoustic wave (BAW) resonators, with their exceptional high-frequency performance and excellent quality factor, have become a key driver of advances in sensing technology. This study reports the fabrication and characterization of a force sensor based on a solid mounted resonator (SMR) structure. This SMR device utilizes a high resonance frequency of 2.257 GHz as its core sensing element. The operational mechanism involves the application of an external load inducing localized downward mechanical deformation in the SMR film at the pin contact region, thereby generating significant in-plane compressive stress within the piezoelectric layer. The applied strain modifies the intrinsic elastic and piezoelectric constants of the film, thereby changing both the acoustic phase velocity and the electromechanical coupling coefficient (Kt2), which ultimately leads to a measurable shift in the resonance frequency. The experimental results reveal a deterministic and robust correlation between the resonance frequency shift and the applied load, which forms a precise function relationship enabling the device to achieve a high sensitivity of 37.79 MHz/N. This indicates that it may possess good application and development potential in various complex industrial fields.


  • Open Access

    Design and Fabrication of a Film Bulk Acoustic Wave Filter for 3.0 GHz–3.2 GHz S-Band

    by Chao Gao, Yupeng Zheng, Haiyang Li, Yuqi Ren, Xiyu Gu, Xiaoming Huang, Yaxin Wang, Yuanhang Qu, Yan Liu, Yao Cai, et al.

    Film bulk acoustic-wave resonators (FBARs) are widely utilized in the field of radio frequency (RF) filters due to their excellent performance, such as high operation frequency and high quality. In this paper, we present the design, fabrication, and characterization of an FBAR filter for the 3.0 GHz–3.2 GHz S-band. Using a scandium-doped aluminum nitride (Sc0.2Al0.8N) film, the filter is designed through a combined acoustic–electromagnetic simulation method, and the FBAR and filter are fabricated using an eight-step lithographic process. The measured FBAR presents an effective electromechanical coupling coefficient (keff2) value up to 13.3%, and the measured filter demonstrates a −3 dB bandwidth of 115 MHz (from 3.013 GHz to 3.128 GHz), a low insertion loss of −2.4 dB, and good out-of-band rejection of −30 dB. The measured 1 dB compression point of the fabricated filter is 30.5 dBm, and the first series resonator burns out first as the input power increases. This work paves the way for research on high-power RF filters in mobile communication.


  • Open Access

    Development of Temperature Sensor Based on AlN/ScAlN SAW Resonators

    by Min Wei, Yan Liu, Yuanhang Qu, Xiyu Gu, Yilin Wang, Wenjuan Liu, Yao Cai, Shishang Guo, Chengliang Sun

    Temperature monitoring in extreme environments presents new challenges for MEMS sensors. Since aluminum nitride (AlN)/scandium aluminum nitride (ScAlN)-based surface acoustic wave (SAW) devices have a high Q-value, good temperature drift characteristics, and the ability to be compatible with CMOS, they have become some of the preferred devices for wireless passive temperature measurement. This paper presents the development of AlN/ScAlN SAW-based temperature sensors. Three methods were used to characterize the temperature characteristics of a thin-film SAW resonator, including direct measurement by GSG probe station, and indirect measurement by oscillation circuit and antenna. The temperature characteristics of the three methods in the range of 30–100 °C were studied. The experimental results show that the sensitivities obtained with the three schemes were −28.9 ppm/K, −33.6 ppm/K, and −29.3 ppm/K. The temperature sensor using the direct measurement method had the best linearity, with a value of 0.0019%, and highest accuracy at ±0.70 °C. Although there were differences in performance, the characteristics of the three SAW temperature sensors make them suitable for sensing in various complex environments.


  • Open Access

    Preparation, Characterization, and Application of AlN/ScAlN Composite Thin Films

    by Laixia Nian, Yuanhang Qu, Xiyu Gu, Tiancheng Luo, Ying Xie, Min Wei, Yao Cai, Yan Liu, Chengliang Sun

    Piezoelectric aluminum nitride (AlN) thin film, as a commonly used material for high-frequency acoustic resonators, has been a research hotspot in the RF field. Doping Sc elements in AlN is one of most effective methods to improve the piezoelectricity of the material. In this work, the first principal calculation and Mori–Tanaka model are used to obtain the piezoelectric constants of AlN, ScAlN, and AlN/ScAlN composites. Then, five types of AlN/ScAlN thin films are prepared on 8 inch silicon substrates. The crystal quality, roughness, and stress distribution are measured to characterize the film quality. The results show that composite film can effectively solve the problem of abnormal grains and reduce the roughness. Finally, a lamb wave resonator with an AlN/Sc0.2Al0.8N composite working at 2.33 GHz is fabricated. The effective electromechanical coupling coefficient Keff2 is calculated to be 6.19%, which has the potential to design high-frequency broadband filters.


  • Open Access

    Aluminum Nitride-Based Adjustable Effective Electromechanical Coupling Coefficient Film Bulk Acoustic Resonator

    by Yuanhang Qu, Tiancheng Luo, Zhiwei Wen, Min Wei, Xiyu Gu, Xiang Chen, Yang Zou, Yao Cai, Yan Liu, Chengliang Sun

    The arrival of the 5G era has promoted the need for filters of different bandwidths. Thin-film bulk acoustic resonators have become the mainstream product for applications due to their excellent performance. The Keff2 of the FBAR greatly influences the bandwidth of the filter. In this paper, we designed an AlN-based adjustable Keff2 FBAR by designing parallel capacitors around the active area of the resonator. The parallel capacitance is introduced through the support column structure, which is compatible with conventional FBAR processes. The effects of different support column widths on Keff2 were verified by finite element simulation and experimental fabrication. The measured results show that the designed FBAR with support columns can achieve a Keff2 value that is 25.9% adjustable.


  • Open Access

    Effects of Electric Bias on Different Sc-Doped AlN-Based Film Bulk Acoustic Resonators

    by Yaxin Wang, Yang Zou, Chao Gao, Xiyu Gu, Ye Ma, Yan Liu, Wenjuan Liu, Jeffrey Bo Woon Soon, Yao Cai, Chengliang Sun

    Film bulk acoustic resonators (FBARs) based on aluminum nitride (AlN) and scandium-doped aluminum nitride (AlScN) exhibit tremendous application aspects in the radio frequency front-end due to achievable high-frequency characteristics, superior thermal performances and compatibility with harsh environments. Delicately controlling the resonant frequency (fs) of FBAR is essential for integrating filters or modules. In this work, we provide a practical feasibility in adjusting fs of AlN and AlScN FBAR using external direct current electric bias (EDC). When applying a negative EDC (the direction along the reversed c-axis), fs shifts to a lower frequency, whereas a positive EDC brings a higher fs. In order to extract the equivalent values of the stiffness coefficient (c33), piezoelectric coefficient (e33) and dielectric constant (εzz) of AlN and AlScN piezoelectric materials, we adopted the electromechanical equivalent Mason model. The results show that the equivalent values of c33 increase with the change of EDC from negative to positive, and, on the other hand, those of e33 and εzz decrease. Our work provides a systematic investigation on the electric field-influenced stiffening effect of AlN and AlScN piezoelectric films and opens a feasibility for frequency-tunable resonators.