Manish Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Manish Gupta has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Abdullah M. Al‐Enizic
Department of Chemistry College of Science King Saud University Riyadh Saudi Arabia
1 shared publication Amit Chaudhary
School of Pharmacy Abhilashi University, Chail Chowk, Mandi H.P, India
1 shared publication- Anchal Sharma
Shiva College of Pharmacy, Bilaspur, Himachal Pradesh, India
1 shared publication - Ashish Shukla
Department of Civil Engineering, GLA University, Mathura 281406, India
1 shared publication - Bhupendra Singh
Abhilashi College of Pharmacy, Ner Chowk, Mandi H.P, India
1 shared publication - Bidhan Pandit
Department of Materials Imperial College London London UK
1 shared publication
Latest Publications
- Top Cited Papers
- 26 June 2023
- Published by Elsevier in Chemosphere
- Vol. 337, 139346
Characteristics estimation of natural fibre reinforced plastic composites using deep multi-layer perceptron (MLP) technique
- 26 June 2023
- Published by Elsevier in Chemosphere
- Vol. 337, 139346
Top Cited PapersCharacteristics estimation of natural fibre reinforced plastic composites using deep multi-layer perceptron (MLP) technique
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
Experimental analysis of Al-SiC-TiB2 hybrid metal matrix composite
In general, metal matrix composites are more suitable as they are well suited to applications where a combination of strength and thermal conductivity is required for damping and low density. MMCs are increasingly used in the automotive industryand in many other applications. In the automotive industry, MMC is used for the production of pistons, brake drums and cylinder blocks because of its high resistance to corrosion and wear. This work, therefore involves the analysis of a composite material consisting of Al 85 percentage and SiC 10 percentage+TiB 25 percentage. Hardness and wear tests will be carried out.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
Open AccessExperimental analysis of Al-SiC-TiB2 hybrid metal matrix composite
In general, metal matrix composites are more suitable as they are well suited to applications where a combination of strength and thermal conductivity is required for damping and low density. MMCs are increasingly used in the automotive industryand in many other applications. In the automotive industry, MMC is used for the production of pistons, brake drums and cylinder blocks because of its high resistance to corrosion and wear. This work, therefore involves the analysis of a composite material consisting of Al 85 percentage and SiC 10 percentage+TiB 25 percentage. Hardness and wear tests will be carried out.
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
A novel quality by design compliant approach for the determination of albendazole in bulk and pharmaceutical dosage form using RP-HPLC
The study conducted in this work is carried out to develop and validate a novel, simple and effective analytical method on RP-HPLC via utilization of the QbD approach. QbD approach not only confirms the robustness of the method but also helps to generate data that is reproducible and reliable. The objective of the current study is to develop and validate a simple analytical RP-HPLC method for the determination of Albendazole in Pharmaceutical formulations using the Analytical Quality by Design approach (AQbd) as per ICH Q8 guidelines. The proposed study was based on the Analytical Quality by Design approach. The chromatographic evaluation of Albendazole was carried out using Inertsil C18 (5 µm) column. The phosphate buffer & Acetonitrile pH 3.5 was used as mobile phase and driven into the column at 1.0 ml/min with an isocratic elution program. The detection wavelength for the estimation of the drug was found to be 254nm. The effect of the mobile phase composition, flow rate, and pH was studied using design expert 11 (Trial version) software. The Albendazole analysis was conducted with a run time of 20 min. The Albendazole was eluted at 17.3 min. During analytical method validation the accuracy, precision, linearity, LOD, and LOQ were determined as per ICH Q2(R1) guidelines. The calibration curve shows good linearity over 2µg/ml to 10µg/ml. The limit of detection (LOD) & Limit of Quantitation (LOQ) was found to be 2.08 µg/ml & 6.09 µg/ml. The study reveals that the Implementation of the QbD approach toward the analytical method development process leads to a more robust method in hands that is truly capable to generate consistent, reliable data of standard level and quality during the life cycle of the process thereby saving time as well as money. Potential risk analysis, technique optimization, get enhanced manifolds in an analytical method when it gets manifested to AQbD. Applying the QbD approach to an analytical method, make the process more reliable, consistent, and less time-consuming than the other RP-HPLC. The Analytical Target Profile (ATP) was to develop the simple, precise & accurate Critical Quality Attributes (CQA) being retention time.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2800 (1)
Open AccessA novel quality by design compliant approach for the determination of albendazole in bulk and pharmaceutical dosage form using RP-HPLC
The study conducted in this work is carried out to develop and validate a novel, simple and effective analytical method on RP-HPLC via utilization of the QbD approach. QbD approach not only confirms the robustness of the method but also helps to generate data that is reproducible and reliable. The objective of the current study is to develop and validate a simple analytical RP-HPLC method for the determination of Albendazole in Pharmaceutical formulations using the Analytical Quality by Design approach (AQbd) as per ICH Q8 guidelines. The proposed study was based on the Analytical Quality by Design approach. The chromatographic evaluation of Albendazole was carried out using Inertsil C18 (5 µm) column. The phosphate buffer & Acetonitrile pH 3.5 was used as mobile phase and driven into the column at 1.0 ml/min with an isocratic elution program. The detection wavelength for the estimation of the drug was found to be 254nm. The effect of the mobile phase composition, flow rate, and pH was studied using design expert 11 (Trial version) software. The Albendazole analysis was conducted with a run time of 20 min. The Albendazole was eluted at 17.3 min. During analytical method validation the accuracy, precision, linearity, LOD, and LOQ were determined as per ICH Q2(R1) guidelines. The calibration curve shows good linearity over 2µg/ml to 10µg/ml. The limit of detection (LOD) & Limit of Quantitation (LOQ) was found to be 2.08 µg/ml & 6.09 µg/ml. The study reveals that the Implementation of the QbD approach toward the analytical method development process leads to a more robust method in hands that is truly capable to generate consistent, reliable data of standard level and quality during the life cycle of the process thereby saving time as well as money. Potential risk analysis, technique optimization, get enhanced manifolds in an analytical method when it gets manifested to AQbD. Applying the QbD approach to an analytical method, make the process more reliable, consistent, and less time-consuming than the other RP-HPLC. The Analytical Target Profile (ATP) was to develop the simple, precise & accurate Critical Quality Attributes (CQA) being retention time.
- Open Access
Effects of Various Pseudomonas Bacteria Concentrations on the Strength and Durability Characteristics of Concrete
The goal of this study is to improve concrete’s efficiency by using a microbiologically produced specific growth/filler. One such way of thinking has resulted in the invention of a highly unusual concrete known as microbial concrete, which uses bacteria to cure flaws in the concrete. Investigators working with various microorganisms suggested several microbial concretes. The bacterium “Pseudomonas” was used in this experiment. Pseudomonas bacteria, which can make calcite precipitates on a proper medium supplied with a calcium supply, is a typical science lab bacterium for calcite generation. Two different concentrations (106 cfu/mL and 107 cfu/mL) of bacteria were added to cement concrete and it was observed that the bacterial concrete with two different concentrations gives results as compared with normal concrete. According to the findings of this investigation, the inclusion of bacteria resulted in a considerable increase in compressive strength when the dilution factor was 106 cells per ml of mixed water. With the incorporation of the microorganisms, it was discovered that holes were partly filled up by material growth, as shown by scanning electron micrography inspection of the sample. Concrete cubes without and with the inclusion of bacteria were molded, and it was discovered that the compressive strength of the cubes with the injection of microorganisms increased significantly. In this study, concrete cylinders without and with the inclusion of microorganisms were molded, and it was discovered that the split tensile strength of the cylinders with the injection of microorganisms increased significantly above the control. When compared with regular concrete, the results showed a maximum increase of 16 percent in compressive strength and a maximum increase of 12 percent in split tensile strength. It was discovered via durability testing that bacterial concrete had less weight loss and stronger tensile strength than conventional concrete when treated with 5 percent H2SO4 or 5 percent MgSO4 compared with control concrete.
Open AccessEffects of Various Pseudomonas Bacteria Concentrations on the Strength and Durability Characteristics of Concrete
The goal of this study is to improve concrete’s efficiency by using a microbiologically produced specific growth/filler. One such way of thinking has resulted in the invention of a highly unusual concrete known as microbial concrete, which uses bacteria to cure flaws in the concrete. Investigators working with various microorganisms suggested several microbial concretes. The bacterium “Pseudomonas” was used in this experiment. Pseudomonas bacteria, which can make calcite precipitates on a proper medium supplied with a calcium supply, is a typical science lab bacterium for calcite generation. Two different concentrations (106 cfu/mL and 107 cfu/mL) of bacteria were added to cement concrete and it was observed that the bacterial concrete with two different concentrations gives results as compared with normal concrete. According to the findings of this investigation, the inclusion of bacteria resulted in a considerable increase in compressive strength when the dilution factor was 106 cells per ml of mixed water. With the incorporation of the microorganisms, it was discovered that holes were partly filled up by material growth, as shown by scanning electron micrography inspection of the sample. Concrete cubes without and with the inclusion of bacteria were molded, and it was discovered that the compressive strength of the cubes with the injection of microorganisms increased significantly. In this study, concrete cylinders without and with the inclusion of microorganisms were molded, and it was discovered that the split tensile strength of the cylinders with the injection of microorganisms increased significantly above the control. When compared with regular concrete, the results showed a maximum increase of 16 percent in compressive strength and a maximum increase of 12 percent in split tensile strength. It was discovered via durability testing that bacterial concrete had less weight loss and stronger tensile strength than conventional concrete when treated with 5 percent H2SO4 or 5 percent MgSO4 compared with control concrete.