Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Faisal Mahmood has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Pyrolytic conversion of pine sawdust into dual-metal doped functional biochar for lithium–selenium batteries

    by Faisal Mahmood, Mustafa Khan, Faisal Rehman, Xing Xie, Haiping Yang, Shihong Zhang, William A. Goddard Iii, Yong Wang, Bin Li


  • Open Access

    Review of Flash Joule Heating for the Synthesis of Graphene and Other Functional Carbon Materials

    by Zhiwu Tan, Faisal Mahmood, Mengzhen Tian, Yimeng Li, Qingfa Zhang, Zhong Ma, Mingfeng Wang, Weiwei Liu, Shihong Zhang, Haiping Yang, et al.

    Flash Joule heating (FJH), as a high‐efficiency and low‐energy consumption technology for advanced materials synthesis, has shown significant potential in the synthesis of graphene and other functional carbon materials. Based on the Joule effect, the solid carbon sources can be rapidly heated to ultra‐high temperatures (> 3000 K) through instantaneous high‐energy current pulses during FJH, thus driving the rapid rearrangement and graphitization of carbon atoms. This technology demonstrates numerous advantages, such as solvent‐ and catalyst‐free features, high energy conversion efficiency, and a short process cycle. In this review, we have systematically summarized the technology principle and equipment design for FJH, as well as its raw materials selection and pretreatment strategies. The research progress in the FJH synthesis of flash graphene, carbon nanotubes, graphene fibers, and anode hard carbon, as well as its by‐products, is also presented. FJH can precisely optimize the microstructures of carbon materials (e.g., interlayer spacing of turbostratic graphene, defect concentration, and heteroatom doping) by regulating its operation parameters like flash voltage and flash time, thereby enhancing their performances in various applications, such as composite reinforcement, metal‐ion battery electrodes, supercapacitors, and electrocatalysts. However, this technology is still challenged by low process yield, macroscopic material uniformity, and green power supply system construction. More research efforts are also required to promote the transition of FJH from laboratory to industrial‐scale applications, thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.


  • Open Access

    Understanding the Synthesis of Turbostratic/Flash Graphene via Joule Heating

    by Faisal Mahmood, Christian Fabrice Magoua Mbeugang, Furqan Asghar, Xing Xie, Dan Lin, Dongjing Liu, Bin Li

    The introduction of the Joule heating (JH) method for synthesizing turbostratic graphene has attracted considerable attention from researchers due to its promising potential for commercialization compared to earlier techniques. Numerous studies have outlined the technology’s basic operation and how parameters such as electric field, operating time, and temperature influence the quality and type of graphene produced. Despite this, there is still a lack of concise and comprehensive studies that exclusively focus on the JH method with turbostratic graphene as the target product. This review article is a facile attempt to provide the scientific community with an overview of the historical development and operational principles of Joule heating. It also discusses the structural and fundamental differences between turbostratic and conventional graphene, along with methodologies for characterizing turbostratic graphene. Furthermore, the synthesis mechanisms of turbostratic graphene via JH are analyzed, and the future perspectives for advancing this method are also presented.


  • Open Access

    Influence of hydrolysis on pyrolysis products from sewage sludge

    by Mujahid Ali, Faisal Mahmood, Mbeugang Christian Fabrice Magoua, Jiazhen Tang, Bin Li

    In this research endeavor, the influence of thermal hydrolysis treatment on product distribution obtained through the pyrolysis of hydrolysis treated sludge and raw sewage sludge was investigated. Raw sewage sludge sample was received from a municipal sewage sludge treatment plant, and hydrolysis of sewage sludge was performed at a temperature of 200?C and a pressure of 0.4 MPa in a fixed-bed furnace. The pore structure of the obtained biochar and non-condensable gas collected at various temperatures was analyzed via Brunauer, Emmett, and Teller and gas chromatography techniques, respectively. The results revealed that thermal hydrolysis treatment had a significant impact on product distribution at varying temperatures (500-800?C). An increase in temperature led to a decrease in the biochar and biooil yield, while the yield of gas increased for both hydrolysis treated sludge and raw sewage sludge. It was observed that the concentration of H2, CH4, and CO from hydrolysis treated sludge was higher than raw sewage sludge. Furthermore, it was observed that by increasing the temperature, the pore volume and specific surface area of the biochar increased while the average pore width decreased. The maximum Brunauer, Emmett, and Teller surface area was measured from biochar obtained from hydrolysis treated sludge at 800?C as 50.61 m2/g. The findings suggest that thermal hydrolysis treatment is a viable method for the treatment of sewage sludge as compared to conventional methods.


  • Open Access

    Influence of Thermal and Chemical Treatment on Biosorbent from Rice Husk and Its Application in Removal of Resorcinol from Industrial Wastewater

    by Salaha Saeed, Muhammad Yousaf Arshad, Ahsan Raza, Faisal Mahmood, Agnieszka Urbanowska, Anam Suhail Ahmed, Lukasz Niedzwiecki

    The removal of phenolic compounds is of great importance because of their toxic nature and potentially harmful effects on the environment and human health. This study examines the use of rice husk as a biosorbent for eliminating phenolic compounds, particularly resorcinol, from industrial wastewater. Three types of rice husk, namely raw rice husk (RRH), chemically treated rice husk (CTRH), and thermally treated rice husk (TTRH), are utilized after grinding and methanol treatment. Characterization techniques including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and optical microscopy are used to analyze the rice husk-based adsorbents. The microscopic analysis reveals the presence of nano-pores in TTRH and the existence of carbonyl and hydroxyl groups in all sorbent samples. XRD analysis confirms the presence of silica in biosorbents. This study also examines the influence of dosage and initial concentration on resorcinol sorption. Optimized dosages of 0.5 g (RRH), 0.5 g (CTRH), and 1.5 g (TTRH) result in sorption capacities of 14 mg/g (RRH), 11 mg/g (CTRH), and 5 mg/g (TTRH). Isotherm analysis indicates that the Langmuir isotherm best describes the sorption behavior of TTRH, while the Freundlich isotherm is observed for CTRH, and both RRH and CTRH follow the Temkin isotherm.


  • Open Access

    Metal(II) triazole complexes: Synthesis, biological evaluation, and analytical characterization using machine learning-based validation

    by Muhammad Yousaf Arshad, Aqsa Rashid, Faisal Mahmood, Salaha Saeed, Anam Suhail Ahmed

    The synthesis of many transition metal complexes containing 3,5-diamino-1,2,4-triazole (Hdatrz) as a ligand with different counter anions Br⎺, Cl⎺, ClO4⎺ and SO42- has been studied extensively, but the chemistry of transition metal nitrate and acetate compounds and their reactivity are relatively unexplored. In this research work, two new series of metal(II) complexes (M = Ni, Co, and Zn) {[Ni3(Hdatrz)6(H2O)6](NO3)6 (1), [Co3(Hdatrz)6(H2O)6](NO3)6 (2), [Zn3(Hdatrz)6(H2O)6](NO3)6 (3), [Ni3(Hdatrz)6(H2O)6](OAc)6 (4), [Co3(Hdatrz)6(H2O)6] (OAc)6 (5) and [Zn3(Hdatrz)6(H2O)6](OAc)6 (6)} have been synthesized. These synthesized complexes were characterized by various physicochemical techniques such as UV-vis spectroscopy, Fourier transform infrared spectroscopy, and magnetic susceptibility measurements. All six complexes were found to be trinuclear and bridged through the Hdatrz ligand. Spectral data suggested a distorted octahedral environment around the central metal ions in these complexes. It also revealed that the NH and OH groups are involved in hydrogen bonding. These complexes were tested against the fungal strains Colletotrichum gloeosporioides and Aspergillus niger. These synthesized complexes have not been observed to have antifungal activities. The machine learning K-nearest neighbours evaluates the analytical characteristics and solubility behavior of the metal complexes. Machine learning models provide results with 75% precision.


  • Open Access

    Machine Learning-Based Relative Performance Analysis of Monocrystalline and Polycrystalline Grid-Tied PV Systems

    by Asfand Yar, Muhammad Yousaf Arshad, Faran Asghar, Waseem Amjad, Furqan Asghar, Muhammad Imtiaz Hussain, Gwi Hyun Lee, Faisal Mahmood

    In this research study, the design and performance evaluation of grid-tied photovoltaic systems has been carried out through experimentation, HelioScope simulation, and black-box machine learning methods for data-driven artificial intelligence system performance assessment and validation. The proposed systems are based on 15 kWp of monoperk and polyperk, which are separately installed in the industrial sector of Faisalabad, Pakistan. The experimental evaluation of the installed PV modules was performed from November 2020 to August 2021. The performance of the PV modules was evaluated by determining the annual average daily final yield (If), performance ratio (PR), and capacity factor (CF). The study showed that the annual average of daily final yield, performance ratio, and capacity factor for 15 kW polyperk was estimated to be 61.94 kWh, 84.17%, and 19.12, respectively. The annual average of daily final yield, performance ratio, and capacity factor for 15 kW monoperk was estimated to be 58.32 kWh, 81.42%, and 18.13, respectively. A comparison of final yield is obtained from simulation and real-time systems obtained from polyperk PV and monoperk. A significant mean error exists between the experimentation and simulation results which lie within the range of 1250 to 1470 kWh and 1600 to 1950 kWh, respectively. Substantial differences between both aforementioned results were initially tested and highlighted by statistical values; i.e., the standard error lies in-between 5 and 45% in polyperk crystalline and 5 and 25% in monocrystalline PV grid-connected module. Machine learning logistical regression evaluated that monoperk crystalline grid-connected system, experimental work was found to be more reliable with error difference reduces in off-peak months as compared to corresponding simulation study and vice versa for polyperk crystalline grid-connected system. Model accuracy after training and testing produced resulted up to 99.5% accuracy for either grid-connected experimentation or simulation outcomes with validation.


  • Open Access

    An Efficient Fault Detection Method for Induction Motors Using Thermal Imaging and Machine Vision

    by Muhammad Rameez Javed, Zain Shabbir, Furqan Asghar, Waseem Amjad, Faisal Mahmood, Muhammad Omer Khan, Umar Siddique Virk, Aashir Waleed, Zunaib Maqsood Haider

    Induction motors (IMs) are the backbone of industry, and play a vital role in daily life as well. However, induction motors face various faults during their operation, which may cause overheating, energy losses, and failure in the motors. Keeping in mind the severity of the issues associated with fault occurrence, this paper proposes a novel method of fault detection in induction motors by using “Machine Vision (MV)” along with “Infrared Thermography (IRT)”. It is worth mentioning that the timely prevention of faults in the IM ensures the motor’s safety from failures, and provides longer service life. In this work, a dataset of thermal images of an induction motor under different conditions (i.e., normal operation, overloaded, and fault) was developed using an infrared camera without disturbing the working condition of the motor. Then, the extracted thermal images were effectively used for the feature extraction and training by local octa pattern (LOP) and support-vector machine (SVM) classifiers, respectively. In order to enhance the quality of feature extraction from images, the LOP was implemented along with a genetic algorithm (GA). Finally, the proposed methodology was implemented and validated by detecting the faults introduced in an induction motor in real time. In addition to that, a comparative study of the suggested methodology with existing methods also verified the supremacy and effectiveness of the proposed method in comparison to the previous techniques.


  • Open Access

    Pakistan indoor air pollution: Investigation of thermal properties of cooking stove

    by Faisal Mahmood

    For low-income homes in developing nations, an improved cooking burner is the most practical solution to minimize indoor air pollution. This research was carried out in a rural region of Khipro City in Pakistan's Sindh province. The thermal efficiency and water boiling tests were carried out on the upgraded cooking stove that was designed. The results of the experiment are equivalent to those of published research. The enhanced cooking stove is made of mud and has design parameters of 10-inch height, 16-inch width, and 32-inch length. A twin mouth cooking burner with a chimney to extrude the generated gases is the design. The designed ICS was tested using a water boiling test (WBT) and found to have a fuel consumption of 293 g with 30% efficiency, which is comparable to the claimed efficiency of ICSs. The use of comparable stoves can considerably reduce the quantity of gases produced by cooking, resulting in a healthier lifestyle.