Huai Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Huai Wang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Fanli Meng
College of Information Science and Engineering, Northeastern University, Shenyang, 110819, China; Hebei Key Laboratory of Micro-Nano Precision Optical Sensing and Measurement Technology, Qinhuangdao, 066004, China; National Frontiers Science Center for Industrial Intelligence and Systems Optimization, Northeastern University, Shenyang, 110819, China; Key Laboratory of Data Analytics and Optimization for Smart Industry (Northeastern University), Ministry of Education, China
9 shared publications - Renze Zhang
College of Information Science and Engineering, Northeastern University, Shenyang, China
5 shared publications Zhenyu Yuan
5 shared publications- Zhenyu Yuan
Northeastern University
5 shared publications Hanyang Ji
3 shared publicationsHongmin Zhu
2 shared publications
Latest Publications
- 5 January 2026
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 451
Mixed-phase 1 T@2H-MoS2/Ce2(MoO4)3 hetero-nanoflowers enabling room-temperature 2-butanone detection
- 5 January 2026
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 451
Mixed-phase 1 T@2H-MoS2/Ce2(MoO4)3 hetero-nanoflowers enabling room-temperature 2-butanone detection
- 13 December 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 451
In-doped SmFeO3 nanoblocks-assembled microsphere composited on graphene gas sensor for ppb-level aniline gas detection
- 13 December 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 451
In-doped SmFeO3 nanoblocks-assembled microsphere composited on graphene gas sensor for ppb-level aniline gas detection
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 546-555
Low-Temperature and High-Performance Acetone Sensor Based on ZIF-67 Derived Co 3 O 4 Modified by Functionalized Graphene
The increasing demand for gas sensors with rapid response, high selectivity, and pronounced sensitivity to trace levels of acetone is evident in both industrial processes and the clinical diagnosis of diabetes. In this study, FGO/Co3O4 sensors were synthesized using graphene chemically functionalized with hydroquinone molecules (FGO) and complexed with ZIF-67 derived Co3O4. The resultant sensors were evaluated for sensing capabilities, which revealed that the optimally formulated 1%FGO/Co3O4 sensor exhibited several advantageous traits when detecting acetone, including low operational temperature, elevated response value, and exceptionally low detection limit. Specifically, the 1%FGO/Co3O4 sensor achieved a response value of 180 to 100 ppm acetone at 100 °C and reached a detection limit of 100 ppb. The improved gas-sensitive performances are primarily contributed to the surface defects on composites, the distinctive three-dimensional structure of Co3O4, and the synergistic effect between FGO/Co3O4 after the formation of heterojunction. With excellent gas sensing properties and low power consumption levels, the FGO/Co3O4 sensor has significant potential for real-time monitoring of acetone in industrial environments and medical diagnostics.
- 3 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nanotechnology
- Vol. 24 (1536125X) , 546-555
Low-Temperature and High-Performance Acetone Sensor Based on ZIF-67 Derived Co 3 O 4 Modified by Functionalized Graphene
The increasing demand for gas sensors with rapid response, high selectivity, and pronounced sensitivity to trace levels of acetone is evident in both industrial processes and the clinical diagnosis of diabetes. In this study, FGO/Co3O4 sensors were synthesized using graphene chemically functionalized with hydroquinone molecules (FGO) and complexed with ZIF-67 derived Co3O4. The resultant sensors were evaluated for sensing capabilities, which revealed that the optimally formulated 1%FGO/Co3O4 sensor exhibited several advantageous traits when detecting acetone, including low operational temperature, elevated response value, and exceptionally low detection limit. Specifically, the 1%FGO/Co3O4 sensor achieved a response value of 180 to 100 ppm acetone at 100 °C and reached a detection limit of 100 ppb. The improved gas-sensitive performances are primarily contributed to the surface defects on composites, the distinctive three-dimensional structure of Co3O4, and the synergistic effect between FGO/Co3O4 after the formation of heterojunction. With excellent gas sensing properties and low power consumption levels, the FGO/Co3O4 sensor has significant potential for real-time monitoring of acetone in industrial environments and medical diagnostics.
- 11 September 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 446
Highly sensitive formic acid detection at low temperatures using Co-doped CuO cocklebur-like nanostructures
- 11 September 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 446
Highly sensitive formic acid detection at low temperatures using Co-doped CuO cocklebur-like nanostructures
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Application of MXene-Based Molecular Sieves in Improving Selectivity of Semiconductor Hydrogen Sensors
The poor gas selectivity of semiconductor resistive gas sensors has been limiting their practical applications. Since semiconductor sensor devices are in direct contact with gases, filtering the gases during gas transmission to isolate the interfering gases and prevent the sensor devices from meeting them is an effective method to improve the selectivity of the sensors. In this paper, a molecular sieve film is reported for semiconductor sensor filters, which can substantially isolate other interfering gases except hydrogen and still retain a high throughput rate for hydrogen. The molecular sieve film is synthesized from the 2D material MXene, which has strong adhesion and flexibility properties, and can be perfectly integrated with the metal filters, which greatly improves the value of the molecular sieve film for practical applications. After systematic testing, it is found that the sensor equipped with molecular sieve compared to no molecular sieve sensor for methane, ammonia and carbon monoxide has about 90% reduction in sensitivity, exciting is still retained 91% of the sensitivity of hydrogen, which is due to the molecular sieve membrane in the nanoscale pores (0.35 nm) in the molecular sieve membrane, which selectively isolates large molecular gases other than hydrogen. This work provides a new approach to improve the selectivity of semiconductor-based hydrogen sensors.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74 (00189456) , 1-10
Application of MXene-Based Molecular Sieves in Improving Selectivity of Semiconductor Hydrogen Sensors
The poor gas selectivity of semiconductor resistive gas sensors has been limiting their practical applications. Since semiconductor sensor devices are in direct contact with gases, filtering the gases during gas transmission to isolate the interfering gases and prevent the sensor devices from meeting them is an effective method to improve the selectivity of the sensors. In this paper, a molecular sieve film is reported for semiconductor sensor filters, which can substantially isolate other interfering gases except hydrogen and still retain a high throughput rate for hydrogen. The molecular sieve film is synthesized from the 2D material MXene, which has strong adhesion and flexibility properties, and can be perfectly integrated with the metal filters, which greatly improves the value of the molecular sieve film for practical applications. After systematic testing, it is found that the sensor equipped with molecular sieve compared to no molecular sieve sensor for methane, ammonia and carbon monoxide has about 90% reduction in sensitivity, exciting is still retained 91% of the sensitivity of hydrogen, which is due to the molecular sieve membrane in the nanoscale pores (0.35 nm) in the molecular sieve membrane, which selectively isolates large molecular gases other than hydrogen. This work provides a new approach to improve the selectivity of semiconductor-based hydrogen sensors.
- 22 April 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 439
Fast-response xylene gas sensor based on Pt-modified Fe2(MoO4)3 nano-hollow spheres compounded on rGO
- 22 April 2025
- Published by Elsevier in Sensors and Actuators B: Chemical
- Vol. 439
Fast-response xylene gas sensor based on Pt-modified Fe2(MoO4)3 nano-hollow spheres compounded on rGO
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-9
Ppb-Level N-Propanol Gas Sensor Based on Ce-Doped Flower-Like In2O3 Compounded on rGO Nanosheets
N-propanol gas inhaled by human body can cause vomiting, headache and other symptoms, causing serious harm to health. Therefore, it is indispensable to research a highly sensitive and efficient n-propanol gas sensor. However, conventional gas sensors cannot detect ppb-level n-propanol gas. In this paper, combining the excellent properties of rare earth element Ce and reduced graphene oxide (rGO), 4%rGO-In 2 O 3 -4%Ce ternary composite was prepared by one step hydrothermal method. The micromorphology and elemental composition of 4%rGO-In 2 O 3 -4%Ce were characterized by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS), respectively. The microstructure of rare earth element Ce doped flower-like In 2 O 3 composited on rGO had been successfully prepared. Then the gas sensitivity of 4%rGO-In 2 O 3 -4%Ce nanocomposite material was tested. The experimental indicated that compared with pure In 2 O 3 , 4%Ce-In 2 O 3 and 4%rGO-In 2 O 3 , 4%rGO-In 2 O 3 -4%Ce to n-propanol gas has the better the gas sensitivity, and the optimal operating temperature of 4%rGOIn 2 O 3 -4%Ce was 200 °C. Furthermore, the 4%rGO-In 2 O 3 -4%Ce gas sensor could detect 1 ppb n-propanol gas. Moreover, the gassensitive mechanism of 4%rGO-In 2 O 3 -4%Ce to n-propanol gas was explained.
- 16 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-9
Ppb-Level N-Propanol Gas Sensor Based on Ce-Doped Flower-Like In2O3 Compounded on rGO Nanosheets
N-propanol gas inhaled by human body can cause vomiting, headache and other symptoms, causing serious harm to health. Therefore, it is indispensable to research a highly sensitive and efficient n-propanol gas sensor. However, conventional gas sensors cannot detect ppb-level n-propanol gas. In this paper, combining the excellent properties of rare earth element Ce and reduced graphene oxide (rGO), 4%rGO-In 2 O 3 -4%Ce ternary composite was prepared by one step hydrothermal method. The micromorphology and elemental composition of 4%rGO-In 2 O 3 -4%Ce were characterized by scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS), respectively. The microstructure of rare earth element Ce doped flower-like In 2 O 3 composited on rGO had been successfully prepared. Then the gas sensitivity of 4%rGO-In 2 O 3 -4%Ce nanocomposite material was tested. The experimental indicated that compared with pure In 2 O 3 , 4%Ce-In 2 O 3 and 4%rGO-In 2 O 3 , 4%rGO-In 2 O 3 -4%Ce to n-propanol gas has the better the gas sensitivity, and the optimal operating temperature of 4%rGOIn 2 O 3 -4%Ce was 200 °C. Furthermore, the 4%rGO-In 2 O 3 -4%Ce gas sensor could detect 1 ppb n-propanol gas. Moreover, the gassensitive mechanism of 4%rGO-In 2 O 3 -4%Ce to n-propanol gas was explained.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-12
High-Performance Conductometric Acetone Gas Sensor Based on Co3O4/ZnO Nanorods With Abundant Oxygen Vacancies
Acetone exhibits flammability, explosiveness, and toxicity, rendering it a multifaceted hazard. Moreover, acetone serves as a vital biomarker for diabetes. Consequently, the demand for low-concentration acetone gas detection sensors is increasingly pressing in numerous sectors, including industrial processes and medical applications. In this study, we report a novel sensor based on Co 3 O 4 /ZnO Nanorods and investigate the influence of Co doping induced oxygen vacancies and the presence of Co 3 O 4 on the sensing properties. The sensor was prepared through a simple one-step hydrothermal method and named Co/ZnONRs. The morphology, composition, and oxygen vacancy defects of the Co/ZnONRs were characterized using various techniques including SEM, TEM, EDS, XRD, XPS, and EPR. Characterization and gas sensing test results have demonstrated that the 1-Co/ZnONRs sensor outperformed previously reported designs, exhibiting high response values, short response times, good selectivity, and low detection limits towards acetone. Specifically, at 250 °C, the sensor demonstrated a response value of 833.33 towards 100 ppm acetone, which is an increase of 10 times compared to the response value of ZnONRs, while the optimal operating temperature decreased by 50 °C, and the detection limit was as low as 100 ppb. The improved sensor performance is attributed to several factors such as changes in resistance caused by active sites generated by Co doping ZnO to form oxygen vacancies, the Co 3 O 4 /ZnO heterojunction, the high specific surface area of Co/ZnONRs, and the unique catalytic activity of Co 3 O 4 . These findings demonstrate the potential of our innovative design to significantly improve the accuracy and efficiency of gas sensors used in industrial processes and medical diagnoses.
- 28 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-12
High-Performance Conductometric Acetone Gas Sensor Based on Co3O4/ZnO Nanorods With Abundant Oxygen Vacancies
Acetone exhibits flammability, explosiveness, and toxicity, rendering it a multifaceted hazard. Moreover, acetone serves as a vital biomarker for diabetes. Consequently, the demand for low-concentration acetone gas detection sensors is increasingly pressing in numerous sectors, including industrial processes and medical applications. In this study, we report a novel sensor based on Co 3 O 4 /ZnO Nanorods and investigate the influence of Co doping induced oxygen vacancies and the presence of Co 3 O 4 on the sensing properties. The sensor was prepared through a simple one-step hydrothermal method and named Co/ZnONRs. The morphology, composition, and oxygen vacancy defects of the Co/ZnONRs were characterized using various techniques including SEM, TEM, EDS, XRD, XPS, and EPR. Characterization and gas sensing test results have demonstrated that the 1-Co/ZnONRs sensor outperformed previously reported designs, exhibiting high response values, short response times, good selectivity, and low detection limits towards acetone. Specifically, at 250 °C, the sensor demonstrated a response value of 833.33 towards 100 ppm acetone, which is an increase of 10 times compared to the response value of ZnONRs, while the optimal operating temperature decreased by 50 °C, and the detection limit was as low as 100 ppb. The improved sensor performance is attributed to several factors such as changes in resistance caused by active sites generated by Co doping ZnO to form oxygen vacancies, the Co 3 O 4 /ZnO heterojunction, the high specific surface area of Co/ZnONRs, and the unique catalytic activity of Co 3 O 4 . These findings demonstrate the potential of our innovative design to significantly improve the accuracy and efficiency of gas sensors used in industrial processes and medical diagnoses.
- 11 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-9
Ppb-Level Triethylamine Gas Sensors Based on Palladium Nanoparticles Modified Flower-Like In2O3 Grown on rGO Nanosheets Operating at Low Temperature
Triethylamine is a toxic gas that strongly stimulates the respiratory tract, resulting in even death after inhalation. However, conventional gas sensors can not detect the ppb levels of triethylamine gas and can not achieve the purpose of environmental detection in life. Therefore, developing ppb-level triethylamine gas sensors is indispensable. In this article, rGO/In 2 O 3 /Pd nanocomposites were prepared by the one-step hydrothermal method. The morphology and structure were fully characterized by transmission electron microscopy etc., which demonstrated that the microstructure of palladium nanoparticles modified flower-like In 2 O 3 grown on rGO nanosheets was successfully synthesized. The gas sensor based on rGO/In 2 O 3 /Pd nanocomposites was then tested for its gas sensitivity. According to the experimental data, the sensitivity of rGO/In 2 O 3 /Pd to triethylamine gas was better than that of pure In 2 O 3 , In 2 O 3 /Pd, and rGO/In 2 O 3 , and the optimal working temperature of rGO/In 2 O 3 /Pd to triethylamine was 175. Besides, the gas sensor based on rGO/In 2 O 3 /Pd could detect 1 ppb triethylamine. The response value of rGO/In 2 O 3 /Pd to 1 ppb triethylamine at the optimal working temperature can reach 1.27. Finally, the gas sensitivity mechanism of the rGO/In 2 O 3 /Pd composite was analyzed.
- 11 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 71 (00189456) , 1-9
Ppb-Level Triethylamine Gas Sensors Based on Palladium Nanoparticles Modified Flower-Like In2O3 Grown on rGO Nanosheets Operating at Low Temperature
Triethylamine is a toxic gas that strongly stimulates the respiratory tract, resulting in even death after inhalation. However, conventional gas sensors can not detect the ppb levels of triethylamine gas and can not achieve the purpose of environmental detection in life. Therefore, developing ppb-level triethylamine gas sensors is indispensable. In this article, rGO/In 2 O 3 /Pd nanocomposites were prepared by the one-step hydrothermal method. The morphology and structure were fully characterized by transmission electron microscopy etc., which demonstrated that the microstructure of palladium nanoparticles modified flower-like In 2 O 3 grown on rGO nanosheets was successfully synthesized. The gas sensor based on rGO/In 2 O 3 /Pd nanocomposites was then tested for its gas sensitivity. According to the experimental data, the sensitivity of rGO/In 2 O 3 /Pd to triethylamine gas was better than that of pure In 2 O 3 , In 2 O 3 /Pd, and rGO/In 2 O 3 , and the optimal working temperature of rGO/In 2 O 3 /Pd to triethylamine was 175. Besides, the gas sensor based on rGO/In 2 O 3 /Pd could detect 1 ppb triethylamine. The response value of rGO/In 2 O 3 /Pd to 1 ppb triethylamine at the optimal working temperature can reach 1.27. Finally, the gas sensitivity mechanism of the rGO/In 2 O 3 /Pd composite was analyzed.