Hakan Kahveci
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hakan Kahveci has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Muhammed Reşit Çorapsız
Erzurum Teknik Universitesi
4 shared publications - Furkan Muhammed Kırıkcı
Karadeniz Teknik Üniversitesi
2 shared publications - Muhammed Fatih Çorapsız
Atatürk Universitesi
2 shared publications - Okan Güngör
Department of Electrical and Electronics Engineering, Alanya Alaaddin Keykubat University, Antalya 07400, Türkiye
2 shared publications - Ömür Akyazi
Karadeniz Teknik Üniversitesi
2 shared publications H.I. Okumuş
Department of Electrical and Electronics Engineering Karadeniz Technical University Trabzon Turkey
1 shared publication
Latest Publications
- Open Access
- 15 June 2025
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 15 (2) , 843-864
Elektrikli Motosiklet İçin Fırçasız Doğru Akım ve Asenkron Motorun Karşılaştırmalı Analizi: Tasarım, Performans ve Optimizasyon
Elektrikli motosikletler, fosil yakıtlara olan bağımlılığı ortadan kaldırmada önemli bir adım olmaları nedeniyle literatürde büyük bir öneme sahiptir. Literatürde, asenkron motorlar (ASM) basit tasarımları, düşük üretim maliyetleri ve dayanıklılıklarıyla; fırçasız doğru akım motorlar (FDAM) ise yüksek verimlilik, tork yoğunluğu ve hassas hız kontrol özellikleriyle ön plana çıkmaktadır. FDA motorların, tekerlek içi (hub motor) uygulamalarda kullanılabilmesi elektrikli motosikletlerde güç aktarım organlarına duyulan ihtiyacı ortadan kaldırmaktadır. Özellikle dıştan rotorlu FDA motorlar ise yüksek tork yoğunluğu ve üstün soğutma özellikleri sayesinde literatürde popüler bir araştırma konusu olmaya devam etmektedir. Bu çalışmada, bir elektrikli motosikletin fiziksel kuvvet hesaplamalarına dayalı olarak (2.2-2.3) kW çıkış gücünü sağlayabilecek ASM ile dıştan rotorlu FDAM tasarımları, Sonlu Elemanlar Yöntemi (SEY) kullanan ANSYS Electronics-Maxwell programında gerçekleştirilmiştir. Motorların hız, verim ve tork parametreleri değerlendirilmiş, ayrıca 2D-Maxwell ortamında akı yoğunlukları incelenmiştir. Elde edilen sonuçlar (%91.14 verim; 50.5 Nm; 11.067 kg), motosiklet uygulamasında FDA motorun üstün olduğunu göstermektedir. Genetik algoritma kullanılarak yapılan optimizasyon ile FDAM’ın istenmeyen Cogging torkunda azalma gerçekleştirilmiştir. Değerlendirme, aynı nüve ve sargı malzemeleri referans alınarak yapılmıştır. Çalışmada, motor tasarım ve optimizasyon yöntemlerinin sunulması literatüre ve uluslararası yarışmalara önemli katkılar sağlamaktadır.
- 15 June 2025
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 15 (2) , 843-864
Open AccessElektrikli Motosiklet İçin Fırçasız Doğru Akım ve Asenkron Motorun Karşılaştırmalı Analizi: Tasarım, Performans ve Optimizasyon
Elektrikli motosikletler, fosil yakıtlara olan bağımlılığı ortadan kaldırmada önemli bir adım olmaları nedeniyle literatürde büyük bir öneme sahiptir. Literatürde, asenkron motorlar (ASM) basit tasarımları, düşük üretim maliyetleri ve dayanıklılıklarıyla; fırçasız doğru akım motorlar (FDAM) ise yüksek verimlilik, tork yoğunluğu ve hassas hız kontrol özellikleriyle ön plana çıkmaktadır. FDA motorların, tekerlek içi (hub motor) uygulamalarda kullanılabilmesi elektrikli motosikletlerde güç aktarım organlarına duyulan ihtiyacı ortadan kaldırmaktadır. Özellikle dıştan rotorlu FDA motorlar ise yüksek tork yoğunluğu ve üstün soğutma özellikleri sayesinde literatürde popüler bir araştırma konusu olmaya devam etmektedir. Bu çalışmada, bir elektrikli motosikletin fiziksel kuvvet hesaplamalarına dayalı olarak (2.2-2.3) kW çıkış gücünü sağlayabilecek ASM ile dıştan rotorlu FDAM tasarımları, Sonlu Elemanlar Yöntemi (SEY) kullanan ANSYS Electronics-Maxwell programında gerçekleştirilmiştir. Motorların hız, verim ve tork parametreleri değerlendirilmiş, ayrıca 2D-Maxwell ortamında akı yoğunlukları incelenmiştir. Elde edilen sonuçlar (%91.14 verim; 50.5 Nm; 11.067 kg), motosiklet uygulamasında FDA motorun üstün olduğunu göstermektedir. Genetik algoritma kullanılarak yapılan optimizasyon ile FDAM’ın istenmeyen Cogging torkunda azalma gerçekleştirilmiştir. Değerlendirme, aynı nüve ve sargı malzemeleri referans alınarak yapılmıştır. Çalışmada, motor tasarım ve optimizasyon yöntemlerinin sunulması literatüre ve uluslararası yarışmalara önemli katkılar sağlamaktadır.
- Open Access
- 18 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (6) , 1189
Single Phase Induction Motor Driver for Water Pumping Powered by Photovoltaic System
Photovoltaic energy is increasingly used in irrigation processes, particularly in arid regions, to pump water from rivers to fields. Rising oil prices, global warming, and the limited availability of fossil fuels have increased the need for alternative energy sources. This study focuses on the design and implementation of a transformerless single-phase photovoltaic system that powers a single-phase induction motor to drive a centrifugal water pump. The methodology aims to achieve the best system performance. A DC–DC boost converter maximizes the output voltage by utilizing maximum power point tracking (MPPT) and extracting the maximum power from the photovoltaic (PV) array. A bidirectional buck-boost converter charges the battery from the DC bus and discharges the battery voltage to the DC bus for loads. The DC voltage is then converted to AC output voltage using a single-phase inverter, which supplies power to the single-phase induction motor driver (IMD). The voltage/frequency (V/f) scaler control is used for a single-phase induction motor. The system employs scalar motor control to achieve the maximum motor speed required to operate the centrifugal water pump efficiently. All results and simulations are carried out in MATLAB/Simulink R2019a version and are compared for different motor and PV parameters numerically.
- 18 March 2025
- Published by MDPI AG in Electronics
- Vol. 14 (6) , 1189
Open AccessSingle Phase Induction Motor Driver for Water Pumping Powered by Photovoltaic System
Photovoltaic energy is increasingly used in irrigation processes, particularly in arid regions, to pump water from rivers to fields. Rising oil prices, global warming, and the limited availability of fossil fuels have increased the need for alternative energy sources. This study focuses on the design and implementation of a transformerless single-phase photovoltaic system that powers a single-phase induction motor to drive a centrifugal water pump. The methodology aims to achieve the best system performance. A DC–DC boost converter maximizes the output voltage by utilizing maximum power point tracking (MPPT) and extracting the maximum power from the photovoltaic (PV) array. A bidirectional buck-boost converter charges the battery from the DC bus and discharges the battery voltage to the DC bus for loads. The DC voltage is then converted to AC output voltage using a single-phase inverter, which supplies power to the single-phase induction motor driver (IMD). The voltage/frequency (V/f) scaler control is used for a single-phase induction motor. The system employs scalar motor control to achieve the maximum motor speed required to operate the centrifugal water pump efficiently. All results and simulations are carried out in MATLAB/Simulink R2019a version and are compared for different motor and PV parameters numerically.
- Open Access
- 18 June 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (2) , 760-788
Enhanced Area Defense: Magnetic Launcher and Sensor Integration
In this article, the most appropriate design method for a field defense system that operates with magnetic field laws by taking audio and video signals as reference is described. The study is important because it eliminates the operator (soldier) factor in the battlefield. Taking into account the effect of capacitor voltage, capacitance value and accelerator winding inductance value, the main criteria for determining the power supply and armature structure of the electromagnetic launcher are proposed. This proposal is made with MATLAB/Simulink software based mathematical model and the differences are explained by comparing with ANSYS Maxwell simulation. The simulated results show that the speed difference between the models is 7%. Additionally, the design methods of the audio and video-based positioning systems that control the system are explained in the study. In this system where signal receiving microphones are positioned in triangular form, a linear algorithm using the time difference method is utilized. By comparing the theoretical mathematical model with the experimental simulation model, the accuracy of the method and the method function is proved. In this study, a deep learning-based target detection system that operates with the YOLO v2 algorithm is used to increase the system's mission execution capacity. The operator is eliminated by switching the system with the signal received from the positioning systems.
- 18 June 2024
- Published by Karadeniz Fen Bilimleri Dergisi in Karadeniz Fen Bilimleri Dergisi
- Vol. 14 (2) , 760-788
Open AccessEnhanced Area Defense: Magnetic Launcher and Sensor Integration
In this article, the most appropriate design method for a field defense system that operates with magnetic field laws by taking audio and video signals as reference is described. The study is important because it eliminates the operator (soldier) factor in the battlefield. Taking into account the effect of capacitor voltage, capacitance value and accelerator winding inductance value, the main criteria for determining the power supply and armature structure of the electromagnetic launcher are proposed. This proposal is made with MATLAB/Simulink software based mathematical model and the differences are explained by comparing with ANSYS Maxwell simulation. The simulated results show that the speed difference between the models is 7%. Additionally, the design methods of the audio and video-based positioning systems that control the system are explained in the study. In this system where signal receiving microphones are positioned in triangular form, a linear algorithm using the time difference method is utilized. By comparing the theoretical mathematical model with the experimental simulation model, the accuracy of the method and the method function is proved. In this study, a deep learning-based target detection system that operates with the YOLO v2 algorithm is used to increase the system's mission execution capacity. The operator is eliminated by switching the system with the signal received from the positioning systems.
- 26 July 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 48 (11) , 15445-15461
Novel PV Array Reconfiguration and Integration with a Maximum Power Point Tracking Algorithm: RMPPT
- 26 July 2023
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 48 (11) , 15445-15461
Novel PV Array Reconfiguration and Integration with a Maximum Power Point Tracking Algorithm: RMPPT
- 13 December 2022
- Published by Wiley in Energy Storage
- Vol. 5 (6)
An overview of frequency‐based power split strategies in electric vehicles with battery/supercapacitor hybrid energy storage system
Energy management in hybrid energy storage systems (HESSs) consisting of battery and supercapacitor packages has an essential role in the efficient and safe use of energy storage devices. In the mentioned HESSs, with frequency separation‐based energy management, the source with slow dynamics (eg, batteries) is supported by other sources with fast dynamics (eg, supercapacitors). To realize power sharing in the battery/supercapacitor HESS, the load current is divided into low‐ and high‐frequency components and supplied/allocated from energy storage devices. This review touches on the historical development of electric vehicles and includes extensive information about the battery and supercapacitor. It also comprehensively analyzes frequency separation‐based power allocation strategies for battery/supercapacitors HESS. These strategies were investigated in detail regarding their features, advantages, and restrictions. In addition, interconnection circuit topologies and control techniques used in frequency‐based power allocation were explained comprehensively. As a result, this study will serve as a guide on frequency‐based power separation principles in HESS.
- 13 December 2022
- Published by Wiley in Energy Storage
- Vol. 5 (6)
An overview of frequency‐based power split strategies in electric vehicles with battery/supercapacitor hybrid energy storage system
Energy management in hybrid energy storage systems (HESSs) consisting of battery and supercapacitor packages has an essential role in the efficient and safe use of energy storage devices. In the mentioned HESSs, with frequency separation‐based energy management, the source with slow dynamics (eg, batteries) is supported by other sources with fast dynamics (eg, supercapacitors). To realize power sharing in the battery/supercapacitor HESS, the load current is divided into low‐ and high‐frequency components and supplied/allocated from energy storage devices. This review touches on the historical development of electric vehicles and includes extensive information about the battery and supercapacitor. It also comprehensively analyzes frequency separation‐based power allocation strategies for battery/supercapacitors HESS. These strategies were investigated in detail regarding their features, advantages, and restrictions. In addition, interconnection circuit topologies and control techniques used in frequency‐based power allocation were explained comprehensively. As a result, this study will serve as a guide on frequency‐based power separation principles in HESS.
- 27 September 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (6) , 15128-15144
The effect of various industrial dust particles on the performance of photovoltaic panels in Turkey
The accumulation of dust is one of the main causes of power loss in photovoltaic (PV) farms, and the effect of dust particles’ size and chemistry on system performance is often overlooked. This study has focused on a comprehensive analysis of the effect of different dust particles collected from common industrial production facilities in Turkey on the performance of PV panels in the indoor laboratory environment. The collected dust samples were analyzed to determine the dust sample particles’ chemical properties, size, character, and topography. The data for dust samples at different weights with changes in maximum power point (MPP) of PV panel has been collected using the artificial solar irradiation source system. Thus, the mathematical correlations (R2≥0.965) between the PV panel Thevenin resistance (RTH), fill factor (FF), MPP, and pollution rate were obtained using these collected data and particle swarm optimization (PSO). According to the results of the obtained mathematical correlations, marble dust is 2.3, 3.4, and 4.2 times less polluting than cement, fly ash, and silica fume, respectively. Additionally, it was observed that smaller dust particles block more light than larger ones of the same weight and reduce MPP, FF while increasing the RTH.
- 27 September 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 30 (6) , 15128-15144
The effect of various industrial dust particles on the performance of photovoltaic panels in Turkey
The accumulation of dust is one of the main causes of power loss in photovoltaic (PV) farms, and the effect of dust particles’ size and chemistry on system performance is often overlooked. This study has focused on a comprehensive analysis of the effect of different dust particles collected from common industrial production facilities in Turkey on the performance of PV panels in the indoor laboratory environment. The collected dust samples were analyzed to determine the dust sample particles’ chemical properties, size, character, and topography. The data for dust samples at different weights with changes in maximum power point (MPP) of PV panel has been collected using the artificial solar irradiation source system. Thus, the mathematical correlations (R2≥0.965) between the PV panel Thevenin resistance (RTH), fill factor (FF), MPP, and pollution rate were obtained using these collected data and particle swarm optimization (PSO). According to the results of the obtained mathematical correlations, marble dust is 2.3, 3.4, and 4.2 times less polluting than cement, fly ash, and silica fume, respectively. Additionally, it was observed that smaller dust particles block more light than larger ones of the same weight and reduce MPP, FF while increasing the RTH.
- 14 August 2022
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (13) , 18819-18838
Double adaptive power allocation strategy in electric vehicles with battery/supercapacitor hybrid energy storage system
- 14 August 2022
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (13) , 18819-18838
Double adaptive power allocation strategy in electric vehicles with battery/supercapacitor hybrid energy storage system
- 11 July 2022
- Published by Wiley in Energy Storage
- Vol. 5 (1)
A study on Li‐ion battery and supercapacitor design for hybrid energy storage systems
This paper discusses a generic design of lithium‐ion (Li‐ion) batteries and supercapacitors, which are important sources for energy storage systems (ESS). The main contribution of this study is to compare the available and experimental models for batteries and supercapacitors operating under continuous charge or discharge conditions. Even though the available models show similar behavior to the experimental ones in short‐term or pulsed discharge conditions, this situation may be different in continuous discharge conditions. For this purpose, the optimal electrical equivalent circuits of energy storage devices were constituted and modeled in the MATLAB/Simulink environment. Then, the electrical equivalent circuit parameters were approximately calculated with the help of dynamic equations. Finally, the model parameters were estimated using Nonlinear Least Squares Method (NLSM) and Trust Region Reflective Algorithm (TRRA). When the obtained results were evaluated together, it has been observed that the electrical equivalent circuit models (EECM) more accurately reveal the transient and steady states of energy storage devices compared to the available models, especially under continuous discharge conditions.
- 11 July 2022
- Published by Wiley in Energy Storage
- Vol. 5 (1)
A study on Li‐ion battery and supercapacitor design for hybrid energy storage systems
This paper discusses a generic design of lithium‐ion (Li‐ion) batteries and supercapacitors, which are important sources for energy storage systems (ESS). The main contribution of this study is to compare the available and experimental models for batteries and supercapacitors operating under continuous charge or discharge conditions. Even though the available models show similar behavior to the experimental ones in short‐term or pulsed discharge conditions, this situation may be different in continuous discharge conditions. For this purpose, the optimal electrical equivalent circuits of energy storage devices were constituted and modeled in the MATLAB/Simulink environment. Then, the electrical equivalent circuit parameters were approximately calculated with the help of dynamic equations. Finally, the model parameters were estimated using Nonlinear Least Squares Method (NLSM) and Trust Region Reflective Algorithm (TRRA). When the obtained results were evaluated together, it has been observed that the electrical equivalent circuit models (EECM) more accurately reveal the transient and steady states of energy storage devices compared to the available models, especially under continuous discharge conditions.
- 28 June 2020
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 7 (1) , 306-318
An Experimental Study to Determine the Relationship Between Power Factor and Harmonic Distortion in Single-Phase AC Voltage Controller
This paper deals with the determination of the relationship between the power factor and the harmonic distortion in a single-phase AC (SPAC) voltage controller. The aim of this study is to investigate the change of power factor (PF) and total harmonic distortion (THD) during different phase triggering angles (PTA). Firstly, the advantages of using thyristor instead of triac in single-phase AC voltage controllers operating at high frequencies are mentioned. Secondly, the power factor and total harmonic distortions for single-phase AC voltage controllers are theoretically examined. Finally, the relationship between power factor and total harmonic distortion are demonstrated by both simulation and experimental studies. However, it is monitored that, at lower output voltages, the power factor (PF) is pretty much reduced and total harmonic distortion (THD) is significantly increased.
- 28 June 2020
- Published by Bilecik Seyh Edebali Universitesi Fen Bilimleri Dergisi in Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi
- Vol. 7 (1) , 306-318
An Experimental Study to Determine the Relationship Between Power Factor and Harmonic Distortion in Single-Phase AC Voltage Controller
This paper deals with the determination of the relationship between the power factor and the harmonic distortion in a single-phase AC (SPAC) voltage controller. The aim of this study is to investigate the change of power factor (PF) and total harmonic distortion (THD) during different phase triggering angles (PTA). Firstly, the advantages of using thyristor instead of triac in single-phase AC voltage controllers operating at high frequencies are mentioned. Secondly, the power factor and total harmonic distortions for single-phase AC voltage controllers are theoretically examined. Finally, the relationship between power factor and total harmonic distortion are demonstrated by both simulation and experimental studies. However, it is monitored that, at lower output voltages, the power factor (PF) is pretty much reduced and total harmonic distortion (THD) is significantly increased.
- Open Access
- 30 July 2019
- Published by Balkan Journal of Electrical & Computer Engineering (BAJECE) in Balkan Journal of Electrical and Computer Engineering
- Vol. 7 (3) , 300-310
Analysis and Suppressing Speed Fluctuations in Brushless DC Motors
The fluctuations in both speed and torque magnitudes during operation are among the major disadvantages of brushless DC motors. These fluctuations occur due to both the commutation of the inverter switches and the phase winding inductances. This case can lead to major problems, especially in applications which are required constant speed and constant torque. In this work, it was aimed to reduce speed fluctuations that occur in brushless DC motors. Firstly, the Matlab/SIMULINK model was created by using the dynamic equations of the brushless DC motor. Secondly, a region selective circuit was designed for use in commutation times. Finally, the commutation signals were generated from the magnitude of the torque produced by the motor. Consequently, the proposed technique was controlled under different speed conditions and was shown that the speed fluctuations can be reduced without the difficult calculations of the commutation time. According to the results obtained, it was observed that the speed fluctuations were significantly reduced.
- 30 July 2019
- Published by Balkan Journal of Electrical & Computer Engineering (BAJECE) in Balkan Journal of Electrical and Computer Engineering
- Vol. 7 (3) , 300-310
Open AccessAnalysis and Suppressing Speed Fluctuations in Brushless DC Motors
The fluctuations in both speed and torque magnitudes during operation are among the major disadvantages of brushless DC motors. These fluctuations occur due to both the commutation of the inverter switches and the phase winding inductances. This case can lead to major problems, especially in applications which are required constant speed and constant torque. In this work, it was aimed to reduce speed fluctuations that occur in brushless DC motors. Firstly, the Matlab/SIMULINK model was created by using the dynamic equations of the brushless DC motor. Secondly, a region selective circuit was designed for use in commutation times. Finally, the commutation signals were generated from the magnitude of the torque produced by the motor. Consequently, the proposed technique was controlled under different speed conditions and was shown that the speed fluctuations can be reduced without the difficult calculations of the commutation time. According to the results obtained, it was observed that the speed fluctuations were significantly reduced.