Mehmet Ugurlu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mehmet Ugurlu has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Görkem Tekin
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Eskişehir Osmangazi University, Eskişehir, Turkey
5 shared publications - Nesrin Saruhan
Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Eskisehir Osmangazi University, Eskisehir, Turkey
5 shared publications - Gizem Çalışkan
Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Eskisehir Osmangazi University, Eskisehir, Turkey
4 shared publications - Yasin Çağlar Koşar
Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Eskisehir Osmangazi University, Eskisehir, Turkey
4 shared publications - Ömür Dereci
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Eskişehir Osmangazi University, Eskişehir, Turkey
3 shared publications - Ayşe Tuğçe Öztürk Kocak
Specialist in Oral and Maxillofacial Radiology, Antalya Oral and Dental Health Center, Antalya, Turkey
2 shared publications
Latest Publications
- Open Access
- 1 September 2026
- Published by Springer Nature in Scientific Reports
Localization of the infraorbital foramen in cleft lip and palate patients: a retrospective study
- 1 September 2026
- Published by Springer Nature in Scientific Reports
Open AccessLocalization of the infraorbital foramen in cleft lip and palate patients: a retrospective study
- Open Access
- 2 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Deep learning detection of ectopic canines and molars in mixed dentition
Ectopic eruption (EE) during the mixed dentition is a significant dental anomaly that requires early detection to prevent complications that may impact function, aesthetics, and health. Advances in artificial intelligence point to the need for automated methods to detect ectopic canines and molars. This study aimed to develop a DL model to automatically detect EE of canines and molars on panoramic radiographs. This retrospective study utilised a dataset of panoramic radiographs from pediatric patients in the mixed dentition stage. EE of canines and molars was defined using angular and positional criteria. Images were annotated by calibrated specialists and divided into training, validation, and test sets. Performance was evaluated using precision, recall, F1-score, Dice coefficient, and mean average precision (mAP). For ectopic canines, precision was 0.786, recall 0.771, F1-score 0.778, Dice coefficient 0.768, and mAP 0.793. For ectopic molars, precision was 0.812, recall 0.650, F1-score 0.722, Dice coefficient 0.757, and mAP 0.719. These results indicate more consistent detection performance for ectopic canines than for molars. DL demonstrated effective diagnostic capability for detecting EE on panoramic radiographs. This tool has potential to improve early diagnosis, support pediatric dental treatment planning, and enhance radiology education.
- 2 April 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Open AccessDeep learning detection of ectopic canines and molars in mixed dentition
Ectopic eruption (EE) during the mixed dentition is a significant dental anomaly that requires early detection to prevent complications that may impact function, aesthetics, and health. Advances in artificial intelligence point to the need for automated methods to detect ectopic canines and molars. This study aimed to develop a DL model to automatically detect EE of canines and molars on panoramic radiographs. This retrospective study utilised a dataset of panoramic radiographs from pediatric patients in the mixed dentition stage. EE of canines and molars was defined using angular and positional criteria. Images were annotated by calibrated specialists and divided into training, validation, and test sets. Performance was evaluated using precision, recall, F1-score, Dice coefficient, and mean average precision (mAP). For ectopic canines, precision was 0.786, recall 0.771, F1-score 0.778, Dice coefficient 0.768, and mAP 0.793. For ectopic molars, precision was 0.812, recall 0.650, F1-score 0.722, Dice coefficient 0.757, and mAP 0.719. These results indicate more consistent detection performance for ectopic canines than for molars. DL demonstrated effective diagnostic capability for detecting EE on panoramic radiographs. This tool has potential to improve early diagnosis, support pediatric dental treatment planning, and enhance radiology education.
- Open Access
- 24 April 2025
- Published by Springer Nature in Head & Face Medicine
- Vol. 21 (1) , 1-9
Evaluation of the density of the midpalatal suture after maxillary expansion: a comparative observational study
This study aimed to evaluate the effects of surgically assisted rapid maxillary expansion (SARME) and rapid maxillary expansion (RME) groups on midpalatal suture (MPS). CBCT records who underwent RME and SARME between 2013 and 2024 were included in the study. CBCT axial sections taken preoperatively (T0) and after a 3-month retention period (T1) were evaluated using the MPS. Fractal Analysis (FA) method using the ImageJ program and compared between the groups. 9 patients underwent SARME (%37.5) and 15 patients underwent RME (%62.5). FA values of the SARME and RME groups at T0 were found to be 1.02 ± 1.17 and 1.46 ± 0.09, respectively. FA values of the SARME and RME groups at T1 were found to be 0.98 ± 1.08 and 1.32 ± 0.08, respectively. The difference between T1 and T0 in the SARME and RME groups was 0.02 ± 0.09 and 0.34 ± 0.08, respectively. When FA differences were compared between the groups, no statistically significant difference was found. (p > 0.05) The potential effect of increasing retention time on the clinical recovery process has been clarified. In patients who underwent RME and SARME, after 3 months of retention, MPS density decreased compared to the initial density. The findings suggest that increasing the retention time in both RME and SARME groups for increased ossification. FA provides a useful method for evaluating skeletal effects of RME and SARME.
- 24 April 2025
- Published by Springer Nature in Head & Face Medicine
- Vol. 21 (1) , 1-9
Open AccessEvaluation of the density of the midpalatal suture after maxillary expansion: a comparative observational study
This study aimed to evaluate the effects of surgically assisted rapid maxillary expansion (SARME) and rapid maxillary expansion (RME) groups on midpalatal suture (MPS). CBCT records who underwent RME and SARME between 2013 and 2024 were included in the study. CBCT axial sections taken preoperatively (T0) and after a 3-month retention period (T1) were evaluated using the MPS. Fractal Analysis (FA) method using the ImageJ program and compared between the groups. 9 patients underwent SARME (%37.5) and 15 patients underwent RME (%62.5). FA values of the SARME and RME groups at T0 were found to be 1.02 ± 1.17 and 1.46 ± 0.09, respectively. FA values of the SARME and RME groups at T1 were found to be 0.98 ± 1.08 and 1.32 ± 0.08, respectively. The difference between T1 and T0 in the SARME and RME groups was 0.02 ± 0.09 and 0.34 ± 0.08, respectively. When FA differences were compared between the groups, no statistically significant difference was found. (p > 0.05) The potential effect of increasing retention time on the clinical recovery process has been clarified. In patients who underwent RME and SARME, after 3 months of retention, MPS density decreased compared to the initial density. The findings suggest that increasing the retention time in both RME and SARME groups for increased ossification. FA provides a useful method for evaluating skeletal effects of RME and SARME.
- Open Access
- 24 June 2024
- Published by Springer Nature in BMC Oral Health
- Vol. 24 (1) , 1-9
The effect of mentoplate application on the condyle
Background: The aim of the study was to investigate the changes occurring in the mandibular condyle by using mentoplate together with rapid maxillary expansion (MP-RME) treatment in the correction of skeletal class III relationship, using fractal analysis (FA). Methods: The sample consisted of 30 individuals (8–11 years) diagnosed with skeletal Class III malocclusion who underwent MP-RME treatment. Archival records provided cone-beam computed tomography (CBCT) images taken at two intervals: before MP-RME treatment (T0) and after treatment (T1). The CBCT images were obtained using standardized settings to ensure consistency in image quality and resolution. The trabecular structures in the bilateral condyles at both T0 and T1 were analyzed using FA. The FA was performed on these condylar images using the Image J software. The region of interest (ROI) was carefully selected in the condyle to avoid overlapping with cortical bone, and the box-counting method was employed to calculate the fractal dimension (FD). Statistical analysis was conducted to compare the FD values between T0 and T1 and to evaluate gender differences. The statistical significance was determined using paired t-tests for intra-group comparisons and independent t-tests for inter-group comparisons, with a significance level set at p < 0.05. Results: The analysis revealed no statistically significant differences in the trabecular structures of the condyles between T0 and T1 (p > 0.05). However, a significant gender difference was observed in FA values, with males exhibiting higher FA values in the left condyle compared to females at both T0 and T1 (p < 0.05). Specifically, the FA values in the left condyle increased from a mean of 1.09 ± 0.09 at T0 to 1.13 ± 0.08 at T1 in males, whereas in females, the FA values remained relatively stable with a mean of 1 ± 0.09 at T0 and 1.03 ± 0.11 at T1. Conclusion: The findings indicate that MP-RME therapy does not induce significant alterations in the trabecular structure of the mandibular condyle. These results suggest the treatment’s safety concerning the structural integrity of the condyle, although the observed gender differences in FA values warrant further investigation.
- 24 June 2024
- Published by Springer Nature in BMC Oral Health
- Vol. 24 (1) , 1-9
Open AccessThe effect of mentoplate application on the condyle
Background: The aim of the study was to investigate the changes occurring in the mandibular condyle by using mentoplate together with rapid maxillary expansion (MP-RME) treatment in the correction of skeletal class III relationship, using fractal analysis (FA). Methods: The sample consisted of 30 individuals (8–11 years) diagnosed with skeletal Class III malocclusion who underwent MP-RME treatment. Archival records provided cone-beam computed tomography (CBCT) images taken at two intervals: before MP-RME treatment (T0) and after treatment (T1). The CBCT images were obtained using standardized settings to ensure consistency in image quality and resolution. The trabecular structures in the bilateral condyles at both T0 and T1 were analyzed using FA. The FA was performed on these condylar images using the Image J software. The region of interest (ROI) was carefully selected in the condyle to avoid overlapping with cortical bone, and the box-counting method was employed to calculate the fractal dimension (FD). Statistical analysis was conducted to compare the FD values between T0 and T1 and to evaluate gender differences. The statistical significance was determined using paired t-tests for intra-group comparisons and independent t-tests for inter-group comparisons, with a significance level set at p < 0.05. Results: The analysis revealed no statistically significant differences in the trabecular structures of the condyles between T0 and T1 (p > 0.05). However, a significant gender difference was observed in FA values, with males exhibiting higher FA values in the left condyle compared to females at both T0 and T1 (p < 0.05). Specifically, the FA values in the left condyle increased from a mean of 1.09 ± 0.09 at T0 to 1.13 ± 0.08 at T1 in males, whereas in females, the FA values remained relatively stable with a mean of 1 ± 0.09 at T0 and 1.03 ± 0.11 at T1. Conclusion: The findings indicate that MP-RME therapy does not induce significant alterations in the trabecular structure of the mandibular condyle. These results suggest the treatment’s safety concerning the structural integrity of the condyle, although the observed gender differences in FA values warrant further investigation.
- Open Access
- 27 May 2024
- Published by Springer Nature in BMC Oral Health
- Vol. 24 (1) , 1-7
Determination of safety margin of nasal septum osteotomy for sphenoid sinus in cleft lip and palate patients
Background: Nasal septum osteotomy is used for separating the nasal septum and maxilla during a Le Fort I osteotomy. If this osteotomy is applied too high or is tilted into the nasal cavity, the sphenoid sinus and various adjacent vital structures may be damaged, and serious bleeding, neurological complications, blindness or even death may occur. The aim of this study is to determine the safety margin of the nasal septum osteotomy for sphenoid sinus during the Le Fort I surgery in cleft lip and palate (CLP) patients. Methods: Twenty cleft lip and palate (the CLP group) and 20 healthy individuals (the control group) were included in this study. Three values (two lines and an angle) were measured by cone beam computed tomography (CBCT). The first line is the line passing through the junction of the spina nasalis anterior point and the lower point of the perpendicular lamina of the palatine bone. The undersired line is the line passing through the junction of the spina nasalis anterior point and the lower anterior border of the base of the sphenoid sinus. The osteotomy angle is the angle between these two lines. Results: In the control group; a surgical line of 44.11–61.14 mm (mean 51.91 ± 4.32), an undesired line of 52.48–69.58 mm (mean 59.14 ± 5.08) and an angle of 18.22–27.270 (mean 22.66 ± 2.55) were found, while in the CLP group, a surgical line of 34.53–51.16 mm (mean 43.38 ± 4.79), an undesired line of 46.86–61.35 mm (mean 55.02 ± 3.24) and an angle of 17.60–28.810 (mean 22.60 ± 2.81) were found. Conclusions: Although the angle to the sphenoid sinus was not significantly affected by CLP, careful planning and consideration of these anatomical differences are crucial to prevent complications and ensure the safety of Le Fort I surgery in CLP patients. Further research with larger sample sizes and subgroup analysis of unilateral and bilateral CLP cases is needed to improve our understanding of these anatomical variations and improve surgical approaches to individuals with CLP undergoing orthognathic procedures.
- 27 May 2024
- Published by Springer Nature in BMC Oral Health
- Vol. 24 (1) , 1-7
Open AccessDetermination of safety margin of nasal septum osteotomy for sphenoid sinus in cleft lip and palate patients
Background: Nasal septum osteotomy is used for separating the nasal septum and maxilla during a Le Fort I osteotomy. If this osteotomy is applied too high or is tilted into the nasal cavity, the sphenoid sinus and various adjacent vital structures may be damaged, and serious bleeding, neurological complications, blindness or even death may occur. The aim of this study is to determine the safety margin of the nasal septum osteotomy for sphenoid sinus during the Le Fort I surgery in cleft lip and palate (CLP) patients. Methods: Twenty cleft lip and palate (the CLP group) and 20 healthy individuals (the control group) were included in this study. Three values (two lines and an angle) were measured by cone beam computed tomography (CBCT). The first line is the line passing through the junction of the spina nasalis anterior point and the lower point of the perpendicular lamina of the palatine bone. The undersired line is the line passing through the junction of the spina nasalis anterior point and the lower anterior border of the base of the sphenoid sinus. The osteotomy angle is the angle between these two lines. Results: In the control group; a surgical line of 44.11–61.14 mm (mean 51.91 ± 4.32), an undesired line of 52.48–69.58 mm (mean 59.14 ± 5.08) and an angle of 18.22–27.270 (mean 22.66 ± 2.55) were found, while in the CLP group, a surgical line of 34.53–51.16 mm (mean 43.38 ± 4.79), an undesired line of 46.86–61.35 mm (mean 55.02 ± 3.24) and an angle of 17.60–28.810 (mean 22.60 ± 2.81) were found. Conclusions: Although the angle to the sphenoid sinus was not significantly affected by CLP, careful planning and consideration of these anatomical differences are crucial to prevent complications and ensure the safety of Le Fort I surgery in CLP patients. Further research with larger sample sizes and subgroup analysis of unilateral and bilateral CLP cases is needed to improve our understanding of these anatomical variations and improve surgical approaches to individuals with CLP undergoing orthognathic procedures.
- 20 January 2024
- Published by Springer Nature in Surgical and Radiologic Anatomy
- Vol. 46 (2) , 159-166
Determining the safety margin of mandibular lingula in sagittal split ramus osteotomy
Purpose The anatomical position of the lingula is clinically very important to prevent injuries during sagittal split ramus osteotomy. Our study aims to evaluate the localisation of the lingula by cone beam computed tomography (CBCT) and to compare the localisation of the lingula between malocclusion, gender, and lingula types. Methods A retrospective study was conducted to evaluate the shape and location of the lingula using CBCT. A total of 250 CBCT images were included in this study. The lingula was classified as nodular, assimilated, truncated, or triangular type. Six defined distances from the top of the lingula were measured: anterior border of the ramus (L-A), posterior border of the ramus (L-P), internal oblique ridge (L-IOR), mandibular notch (L-N), and distal surface of the mandibular second molar (L-M2) and occlusal plane (L-OP). The measured distances were compared between gender, malocclusion, and lingula types. Results The most common type of lingula was nodular (32.4%). The L-N, L-P, L-M2, and L-OP distances between genders were statistically higher in male patients than in female patients. The L-IOR, L-M2, and L-OP distances exhibited statistically significant differences found between malocclusions. No statistically significant difference was found when the distances of the lingula to the anatomical points were compared between the lingula types. Conclusion These variations in positioning of the lingula depending on the dysmorphoses are developing towards a systematic 3D examination before any mandibular osteotomy to precisely visualize the position and shape of the lingula.
- 20 January 2024
- Published by Springer Nature in Surgical and Radiologic Anatomy
- Vol. 46 (2) , 159-166
Determining the safety margin of mandibular lingula in sagittal split ramus osteotomy
Purpose The anatomical position of the lingula is clinically very important to prevent injuries during sagittal split ramus osteotomy. Our study aims to evaluate the localisation of the lingula by cone beam computed tomography (CBCT) and to compare the localisation of the lingula between malocclusion, gender, and lingula types. Methods A retrospective study was conducted to evaluate the shape and location of the lingula using CBCT. A total of 250 CBCT images were included in this study. The lingula was classified as nodular, assimilated, truncated, or triangular type. Six defined distances from the top of the lingula were measured: anterior border of the ramus (L-A), posterior border of the ramus (L-P), internal oblique ridge (L-IOR), mandibular notch (L-N), and distal surface of the mandibular second molar (L-M2) and occlusal plane (L-OP). The measured distances were compared between gender, malocclusion, and lingula types. Results The most common type of lingula was nodular (32.4%). The L-N, L-P, L-M2, and L-OP distances between genders were statistically higher in male patients than in female patients. The L-IOR, L-M2, and L-OP distances exhibited statistically significant differences found between malocclusions. No statistically significant difference was found when the distances of the lingula to the anatomical points were compared between the lingula types. Conclusion These variations in positioning of the lingula depending on the dysmorphoses are developing towards a systematic 3D examination before any mandibular osteotomy to precisely visualize the position and shape of the lingula.
- 1 June 2022
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 35 (2) , 94-100
Performance of a Convolutional Neural Network- Based Artificial Intelligence Algorithm for Automatic Cephalometric Landmark Detection
Anatomic landmark,lateral cephalometric radiograph,deep learning,artificial intelligence
- 1 June 2022
- Published by Galenos Yayinevi in Turkish Journal of Orthodontics
- Vol. 35 (2) , 94-100
Performance of a Convolutional Neural Network- Based Artificial Intelligence Algorithm for Automatic Cephalometric Landmark Detection
Anatomic landmark,lateral cephalometric radiograph,deep learning,artificial intelligence
- Open Access
- 30 April 2022
- Published by Mersin Universitesi Saglik Bilimleri Dergisi in Mersin Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 15 (1) , 8-15
Farklı iskeletsel patern’e sahip hastalarda TME morfolojisinin değerlendirilmesi: Bir retrospektif pilot çalışma
Amaç: Bu çalışmada konik ışınlı bilgisayarlı tomografi kullanılarak farklı iskeletsel paterne sahip hastalarda eklem morfolojisinin değerlendirilmesi amaçlanmıştır. Yöntem: Çalışma kapsamında temporomandibular eklem’in görüntülenebildiği ve iskeletsel ölçümlerin yapılabildiği konik ışınlı bilgisayarlı tomografi görüntüleri üzerinde kondil şekli (yuvarlak, düz, konveks, açılı), kondil genişlik ve uzunlukları, glenoid fossa taban kalınlığı ölçümleri yapıldı. 3 farklı iskeletsel paterne ve cinsiyetlere göre kondil şekillerinin görülme sıklıkları ve elde edilen ölçümler arası farklılıklar istatistiksel olarak değerlendirildi. Bulgular: Hasta grubunda konveks, açılı, flat ve yuvarlak tip kondillerin görülme sıklığı sırasıyla %39.8, %9.9, %38.1, %12.2’ydi. Hem tüm çalışma grubunda hem de Sınıf 1 ve 3 hastalarda en sık konveks tip görülürken, Sınıf 2 hastalarda flat tip kondilin görülme sıklığı anlamlı derecede Sınıf 3 hastalardan fazlaydı. Ölçüm değerleri arasında sadece kondil yüksekliği Sınıf 3 hastalarda Sınıf 2 hastalara göre anlamlı derecede yüksek bulundu. Sonuç: Bu çalışmada temporomandibular eklem morfolojisi ile iskeletsel paternlerin ilişkili olduğu tespit edilmiştir. Ortodontik tedavi ve takiplerinde sık karşılaşılabilecek eklem anatomisinin bilinmesi yapılan ortodontik tedaviye bağlı meydana gelen değişikliklerin tespit edilmesinde fayda sağlayacak, eklem öncelikli tedavilerin planlanmasının önünü açacaktır.
- 30 April 2022
- Published by Mersin Universitesi Saglik Bilimleri Dergisi in Mersin Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 15 (1) , 8-15
Open AccessFarklı iskeletsel patern’e sahip hastalarda TME morfolojisinin değerlendirilmesi: Bir retrospektif pilot çalışma
Amaç: Bu çalışmada konik ışınlı bilgisayarlı tomografi kullanılarak farklı iskeletsel paterne sahip hastalarda eklem morfolojisinin değerlendirilmesi amaçlanmıştır. Yöntem: Çalışma kapsamında temporomandibular eklem’in görüntülenebildiği ve iskeletsel ölçümlerin yapılabildiği konik ışınlı bilgisayarlı tomografi görüntüleri üzerinde kondil şekli (yuvarlak, düz, konveks, açılı), kondil genişlik ve uzunlukları, glenoid fossa taban kalınlığı ölçümleri yapıldı. 3 farklı iskeletsel paterne ve cinsiyetlere göre kondil şekillerinin görülme sıklıkları ve elde edilen ölçümler arası farklılıklar istatistiksel olarak değerlendirildi. Bulgular: Hasta grubunda konveks, açılı, flat ve yuvarlak tip kondillerin görülme sıklığı sırasıyla %39.8, %9.9, %38.1, %12.2’ydi. Hem tüm çalışma grubunda hem de Sınıf 1 ve 3 hastalarda en sık konveks tip görülürken, Sınıf 2 hastalarda flat tip kondilin görülme sıklığı anlamlı derecede Sınıf 3 hastalardan fazlaydı. Ölçüm değerleri arasında sadece kondil yüksekliği Sınıf 3 hastalarda Sınıf 2 hastalara göre anlamlı derecede yüksek bulundu. Sonuç: Bu çalışmada temporomandibular eklem morfolojisi ile iskeletsel paternlerin ilişkili olduğu tespit edilmiştir. Ortodontik tedavi ve takiplerinde sık karşılaşılabilecek eklem anatomisinin bilinmesi yapılan ortodontik tedaviye bağlı meydana gelen değişikliklerin tespit edilmesinde fayda sağlayacak, eklem öncelikli tedavilerin planlanmasının önünü açacaktır.
- Open Access
- 14 October 2018
- Published by Ataturk Universitesi in Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
- Vol. 4 (28) , 457-461
PUBERTAL BÜYÜME ATILIMI EVRELERİNİN BELİRLENMESİNDE SERVİKAL VERTEBRA MATURASYONLARININ DEĞERLENDİRİLMESİ
Amaç: Bu çalışmanın amacı, lateral sefalometrik rad- yografiler üzerinden belirlenen servikal vertebraların maturasyonel safhaları ile bireylerin kronolojik yaşları arasındaki ilişkinin incelenmesidir. Gereç ve Yöntem: Çalışmamıza kronolojik yaşları 9-16 aralığında olan 45 kız ve 45 erkek toplam 90 sağlıklı birey dahil edilmiştir. Lateral sefalometrik radyogra- filerin alındığı gün esas alınarak bireylerin ay cinsinden yaşları hesaplanmıştır. Lateral sefalometrik radyogra- filerde servikal vertebral büyüme atılımının değerlendi- rilmesinde Hassel-Farman yöntemi kullanılmıştır. Elde edilen verilerin istatistiksel analizleri SPSS 20.0 prog- ramı ile Spearman Rank Korelasyon Analizi, Kolmogorov-Smirnov testi kullanılarak yapılmıştır. Bulgular: Bireylerin Hassel-Farman yöntemi ile belir- lenen pubertal büyüme atılımı evreleri ile ay cinsinden kronolojik yaşları arasındaki ilişki değerlendirilmiş ve kız bireyler açısından bu değer (ρ=0,661) “orta dere- celi korelasyon” gösterirken erkek bireyler açısından ise bu değer (ρ=0,559) yine “orta dereceli korelasyon” göstermiştir. Sonuç: Servikal vertebraların maturasyonel aşama- larının değerlendirilmesi ile belirlenen pubertal atılım evreleri ile kronolojik yaş arasında hem kızlarda hem de erkeklerde orta derecede korelasyon olduğu belir- lenmiş ve sonuç olarak bu metodun ortodontik açıdan iskeletsel maturasyonun değerlendirilmesinde el-bilek radyografisi elde edilemeyen durumlarda alternatif bir metot olabileceği düşünülmüştür. Anahtar Kelimeler: Pubertal büyüme atılımı, kronolojik yaş, servikal vertebra, Grave-Brown ve Hassel-Farman yöntemleri ASSESSMENT OF CERVICAL VERTEBRA MATURATION IN THE DETERMINATION OF PUBERTAL GROWTH SPURT PHASES ABSTRACT Aim : The aim of this study is to examine the relationship between the maturational phases of cervical vertebrae determined by lateral cephalometric radiographs and chronological ages of the individuals. Materials and Methods : This study comprised a total of 90 healthy individuals, 45 girls and 45 boys, with chronological ages ranging between 9-16. The age of the each individual were calculated in months at the time when the lateral cephalometric radiographs were taken. The Hassel-Farman method was used for the evaluation of pubertal growth spurt utlizing cervical vertebrae images in lateral cephalometric radiographs. Statistical analyzes of the data were performed using Spearman rank correlation analysis, Kolmogorov-Smirnov test with SPSS 20.0 program. Results: The relation between the phases of the pubertal growth spurt in the individuals determined by Hassel-Farman method and their chronological ages by months is evaluated and it was found that they were moderately correlated in both females and males with the value of (p=0,661) and (p=0,559) consecutively. Conclusion : It has been determined that there is a moderate correlation between chronological age and the developmental growth stages determined cervical vertebrae maturation both in females and males. Therefore this method may considered to be a suitable method that can be used in the identification and evulation of the growth and developmental stage in terms of orthodontics. * Serbest Diş Hekimi ** Atatürk Üniversitesi, Diş Hekimliği Fakültesi, Ortodonti AD, Erzurum Keywords: Pubertal growth spurt, chronological age, cervical vertebra, Grave-Brown and Hassel-Farman methods
- 14 October 2018
- Published by Ataturk Universitesi in Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi
- Vol. 4 (28) , 457-461
Open AccessPUBERTAL BÜYÜME ATILIMI EVRELERİNİN BELİRLENMESİNDE SERVİKAL VERTEBRA MATURASYONLARININ DEĞERLENDİRİLMESİ
Amaç: Bu çalışmanın amacı, lateral sefalometrik rad- yografiler üzerinden belirlenen servikal vertebraların maturasyonel safhaları ile bireylerin kronolojik yaşları arasındaki ilişkinin incelenmesidir. Gereç ve Yöntem: Çalışmamıza kronolojik yaşları 9-16 aralığında olan 45 kız ve 45 erkek toplam 90 sağlıklı birey dahil edilmiştir. Lateral sefalometrik radyogra- filerin alındığı gün esas alınarak bireylerin ay cinsinden yaşları hesaplanmıştır. Lateral sefalometrik radyogra- filerde servikal vertebral büyüme atılımının değerlendi- rilmesinde Hassel-Farman yöntemi kullanılmıştır. Elde edilen verilerin istatistiksel analizleri SPSS 20.0 prog- ramı ile Spearman Rank Korelasyon Analizi, Kolmogorov-Smirnov testi kullanılarak yapılmıştır. Bulgular: Bireylerin Hassel-Farman yöntemi ile belir- lenen pubertal büyüme atılımı evreleri ile ay cinsinden kronolojik yaşları arasındaki ilişki değerlendirilmiş ve kız bireyler açısından bu değer (ρ=0,661) “orta dere- celi korelasyon” gösterirken erkek bireyler açısından ise bu değer (ρ=0,559) yine “orta dereceli korelasyon” göstermiştir. Sonuç: Servikal vertebraların maturasyonel aşama- larının değerlendirilmesi ile belirlenen pubertal atılım evreleri ile kronolojik yaş arasında hem kızlarda hem de erkeklerde orta derecede korelasyon olduğu belir- lenmiş ve sonuç olarak bu metodun ortodontik açıdan iskeletsel maturasyonun değerlendirilmesinde el-bilek radyografisi elde edilemeyen durumlarda alternatif bir metot olabileceği düşünülmüştür. Anahtar Kelimeler: Pubertal büyüme atılımı, kronolojik yaş, servikal vertebra, Grave-Brown ve Hassel-Farman yöntemleri ASSESSMENT OF CERVICAL VERTEBRA MATURATION IN THE DETERMINATION OF PUBERTAL GROWTH SPURT PHASES ABSTRACT Aim : The aim of this study is to examine the relationship between the maturational phases of cervical vertebrae determined by lateral cephalometric radiographs and chronological ages of the individuals. Materials and Methods : This study comprised a total of 90 healthy individuals, 45 girls and 45 boys, with chronological ages ranging between 9-16. The age of the each individual were calculated in months at the time when the lateral cephalometric radiographs were taken. The Hassel-Farman method was used for the evaluation of pubertal growth spurt utlizing cervical vertebrae images in lateral cephalometric radiographs. Statistical analyzes of the data were performed using Spearman rank correlation analysis, Kolmogorov-Smirnov test with SPSS 20.0 program. Results: The relation between the phases of the pubertal growth spurt in the individuals determined by Hassel-Farman method and their chronological ages by months is evaluated and it was found that they were moderately correlated in both females and males with the value of (p=0,661) and (p=0,559) consecutively. Conclusion : It has been determined that there is a moderate correlation between chronological age and the developmental growth stages determined cervical vertebrae maturation both in females and males. Therefore this method may considered to be a suitable method that can be used in the identification and evulation of the growth and developmental stage in terms of orthodontics. * Serbest Diş Hekimi ** Atatürk Üniversitesi, Diş Hekimliği Fakültesi, Ortodonti AD, Erzurum Keywords: Pubertal growth spurt, chronological age, cervical vertebra, Grave-Brown and Hassel-Farman methods