SBSuraj Bhan

Suraj Bhan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Suraj Bhan has a total of 20 co-authors. Here are the top co-authors by number of shared publications:

  • Prem Shankar Yadav

    Department of Mechanical Engineering and Design Madan Mohan Malaviya University of Technology Gorakhpur India

    3 shared publications
  • Pushpendra Singh

    Department of Mechanical Engineering Delhi Technological University Delhi India

    3 shared publications
  • Raghvendra Gautam

    Department of Mechanical Engineering Delhi Technological University Delhi India

    3 shared publications
  • Ragvendra Gautam

    Department of Mechanical Engineering Delhi Technological University Delhi India

    3 shared publications
  • Sumit Mahajan

    Department of Mechanical Engineering & Design Jaypee Institute of Information Technology Noida UP India

    3 shared publications
  • Girish Dutt Gautam

    Department of Mechanical Engineering IIMT College of Engineering Greater Noida India

    2 shared publications

Latest Publications

  • Optimization of performance and emission characteristics of a CRDI VCR engine fueled with cerium‐oxide‐enriched waste‐cooking biodiesel

    by Suraj Bhan, Sumit Mahajan, Prem Shanker Yadav, Sugandha Singh, Pankaj Kumar Sharma

    The present study examines the impact of adding cerium oxide nanoparticles to waste cooking oil biodiesel on the performance and emission characteristics of a diesel engine under varying operating conditions. Response surface methodology was used to optimize the engine responses based on the following input parameters: fuel mixture ratio, injection pressure, compression ratio, and engine load. The multi‐objective nonlinear optimization aims to maximize brake thermal efficiency and minimize specific fuel consumption and exhaust emissions of carbon monoxide, unburned hydrocarbons, and nitrogen oxides. The developed quadratic models showed very strong statistical significance, confirming the robustness and predictive reliability of the RSM approach. The optimal operating conditions of the engine are identified as a nanoparticle‐enriched biodiesel blend ratio of −0.38 (coded value), an injection pressure of 0.28 (coded value), a compression ratio of 1.00, and an engine load of 9.0 kg. On these optimized conditions, the engine achieved a BTE of 33.17% and an SFC of 214.54 g/kWh, along with substantial emission reductions of CO (0.037%), HC (8.32 ppm), and NO x (1260.94 ppm). The close agreement between experimental and predicted results further validated the accuracy of the developed models. Consequently, the integration of cerium oxide nanoparticle‐enhanced waste cooking biodiesel with RSM‐based optimization explores a promising strategy for improving diesel engine performance while significantly mitigating harmful exhaust emissions.

  • Nano‐catalyst‐assisted biodiesel production: Advances, emerging technologies, and future perspectives for sustainable energy

    by Jugendra Singh, Sumit Mahajan, Suraj Bhan

    Biodiesel has emerged as a sustainable alternative to conventional fossil fuels due to increasing concerns regarding energy security and environmental pollution. Catalysts have a significant role in improving the conversion efficiency and economic viability of biodiesel production. This review presents a comprehensive analysis of recent advances in catalytic technologies for biodiesel production, with particular emphasis on nano‐catalysts and emerging nano‐catalytic strategies. The characteristics of homogeneous, heterogeneous, enzymatic, and nano‐catalysts are critically compared in terms of catalytic activity, reusability, feedstock compatibility, and environmental impact. Special attention is given to nano‐catalysts because of their high surface‐to‐volume ratio, enhanced catalytic activity, and improved reaction kinetics. Various types of nano‐catalysts, including magnetic, metal‐based, carbon‐based, hybrid, enzyme‐immobilized, and bimetallic systems, are systematically discussed with respect to their catalytic performance in biodiesel production. Furthermore, next‐generation catalytic strategies such as artificial intelligence and machine learning‐assisted catalyst design, single‐atom catalysts, plasma‐assisted catalytic systems, microreactor‐based processes, photo‐electrocatalytic systems, and smart self‐healing nano‐catalysts are highlighted as emerging approaches for improving biodiesel production efficiency. In addition, synthesis methods, advanced characterization techniques, and techno‐economic considerations are discussed to establish the relationship between catalyst structure and catalytic performance. Key challenges related to catalyst stability, environmental sustainability, scalability, and industrial implementation are also critically analyzed. The objective of this review is to systematically evaluate recent advancements in nano‐catalyst technologies for biodiesel production, assess their catalytic performance, and identify key challenges and future research directions for developing sustainable and scalable catalytic systems.


  • Optimization of biodiesel properties using Free Fatty Acid ‐based blending, Artificial and Machine Learning modelling, and advanced production technologies: A comprehensive review

    by Suraj Bhan, Prem Shankar Yadav, Vimal Bibhu, Girish Dutt Gautam, Ragvendra Gautam

    This study presents a novel approach for optimizing biodiesel properties through the strategic blending of feedstocks with different free fatty acid profiles and the application of advanced production techniques. The unique contribution lies in the integration of AI and machine learning models with FFA‐based blending strategies to develop predictive frameworks for tailoring biodiesel blends to specific engine and climatic requirements. Strategic blending of biodiesels from feedstocks rich in specific FFAs enhances key physicochemical properties: saturated fatty acids such as palmitic (C16:0), stearic (C18:0), and lauric (C12:0) improve oxidative stability, flash point, and cetane number, while unsaturated fatty acids like oleic (C18:1) and linoleic (C18:2) reduce viscosity and enhance cold flow characteristics. AI/ML techniques, including SVM, ANN, XGBoost, CatBoost, and deep neural networks, enable high‐precision prediction of FFA profiles and physicochemical properties such as cetane number, viscosity, density, cold flow behavior, and oxidative stability. In parallel, advanced production methods such as ultrasound‐assisted transesterification, supercritical fluid processing, and nano‐biocatalysts improve the biodiesel yield and physicochemical properties of the feedstock. The synergistic integration of predictive AI/ML models with innovative blending and catalytic techniques provides a comprehensive, data‐driven framework for producing high‐quality biodiesel that meets global fuel standards and promotes sustainable adoption in the transportation sector.


  • Optimization of SI engine responses fueled with hydrogen‐enriched G30 fuel: Experimental and statistical approach

    by Suraj Bhan, Prem Shankar Yadav, Sumit Mahajan, Vimal Bibhu, Shashank Awasthi, Abhishek Sharma, Ragvendra Gautam, Saket Kumar

    Conventional gasoline engines face challenges in achieving high thermal efficiency and low emissions due to the inherent thermodynamic and environmental constraints of fossil fuels. Blending gasoline with higher alcohols such as butanol enhances combustion and reduces emissions, but partial substitution often results in suboptimal performance. Hydrogen, with its superior combustion characteristics and carbon‐free nature, offers a promising route to overcome these limitations. In this study, a hydrogen‐enriched G30 blend (70% gasoline + 30% butanol) was tested in a spark‐ignition engine to optimize performance and emission characteristics by varying fuel composition, injection timing, and engine speed. Response surface methodology (RSM) was applied to develop second‐order regression models for brake thermal efficiency (BTE), specific fuel consumption (SFC), and emissions (CO, UHC, NOₓ). The models demonstrated strong predictive accuracy with R 2 values of 0.9681 (SFC), 0.9643 (BTE), 0.9410 (CO), 0.9994 (UHC), and 0.9997 (NOₓ). Multi‐response optimization identified optimal conditions at hydrogen enrichment (+1.00), injection timing (−1.00), and engine speed (−1.00), achieving an SFC of 0.2613 kg/kWh, BTE of 30.28%, CO of 0.0191%, UHC of 27.70 ppm, and NOₓ of 84.50 ppm with an overall desirability of 83%. Experimental validation confirmed close agreement between predicted and observed results. The findings highlight that hydrogen enrichment enhances combustion efficiency and reduces incomplete combustion products, while the oxygenated nature of butanol aids in moderating NOₓ formation. Thus, hydrogen‐enriched G30 blends optimized via RSM present a viable pathway toward cleaner and more efficient spark‐ignition engine operation.


  • Innovative catalytic approaches for optimizing biodiesel production: A review of homogeneous, heterogeneous, enzymatic, and nanostructured catalysts

    by Suraj Bhan, Saket Kumar, Raghvendra Gautam, Prem Shankar Yadav, Girish Dutt Gautam, Sumit Mahajan

    This review examines the advancements in catalysts for biodiesel production, highlighting the benefits of innovative approaches such as homogeneous and heterogeneous catalysts, enzyme catalysis, and nanoparticles. It uniquely synthesizes insights into catalytic methods, evaluating their effectiveness and challenges, particularly in the context of high free fatty acid feedstocks. Alkaline catalysts, while efficient, face limitations due to saponification; however, recent developments in catalyst doping with metal oxides have significantly improved reactivity and mitigated side reactions. Homogeneous acid catalysts are effective for high FFA feedstocks but present challenges such as corrosiveness and high alcohol consumption. In contrast, heterogeneous catalysts, including solid materials like zeolites and metal oxides, offer enhanced separation, stability, and reusability. This review also highlights the role of enzyme catalysts, particularly lipases, emphasizing immobilization techniques and enzyme engineering for improved stability and reusability. A distinctive aspect of this work is its in‐depth exploration of nanocatalysts, such as nanoparticles and Metal–Organic Frameworks, which enhance catalytic efficiency and stability due to their high surface area to volume properties. Additionally, the review critically assesses various preparation methods, including sol–gel and impregnation techniques, providing guidelines for future work. By identifying research gaps and future directions, this study contributes to the advancement of sustainable biodiesel production technologies.


  • Optimization of performance and emissions of a diesel engine using acetylene-enriched waste cooking biodiesel

    by Suraj Bhan, Prem Shanker Yadav, Girish Gautam, Ragvendra Gautam, Saket Kumar, Manish Kumar


  • Application of response surface approach to optimize CI engine parameters fuelled by newly developed waste cooking biodiesel infused with Al2O3 nanoparticle

    by Suraj Bhan, Raghvendra Gautam, Pushpendra Singh

    In the present study, newly developed waste cooking biodiesel (B20) with nanoparticles (Al2O3) was tested to optimize the response of a CRDI single‐cylinder four‐stroke VCR engine at various input parameters. A response surface methodology (RSM) was used to investigate the impact of various input parameters, such as injection pressure (IP), load, compression ratio (CR), and nanoparticle concentration as fuel additives on engine responses, including brake thermal efficiency (BTE), specific fuel consumption (SFC), carbon dioxide (CO), hydrocarbon (HC), and oxide of nitrogen (NOX) emissions. The RSM found the best suitable value of all input parameters at which the engine produced maximum performance and minimum emissions. Accordingly, the optimal setting of all input parameters was identified as a nano biofuel blend ratio of 1.10, IP of 656 bar, CR of 18.50, and a load of 7.10 kg. At this combination of input parameters, the optimal BTE, SFC, CO, HC, and NOx are 23.6%, 0.3461 kg/kWh, 0.0281%, 25.3756 ppm, and 536.41 ppm respectively. The predicted optimum value from RSM is compared with the experimental value for validity and found a fair agreement.


  • Analyzing the impact of adding aluminum oxide and cerium oxide nanoparticles to waste cooking biodiesel on engine performance, combustion and emissions characteristics

    by Suraj Bhan, Raghvendra Gautam, Pushpendra Singh

    The purpose of this research is to analyze the emission, combustion, and performance parameters of a CRDI diesel engine fueled by waste cooking oil (WCO) biodiesel (B20%), diesel (80%), and their blend with two distinct metal-based nanoparticles cerium oxide (CeO2) and aluminum oxide (Al2O3). Transesterification was used to produce biodiesel from waste cooking oil (WCO). An ultrasonication procedure was used to gradually mingle the nanoparticles with a B20-diesel fuel blend in mass fractions of 50 and 100 ppm. The developed nanoparticle fuel samples were designated as (B20 + 50 Al2O3, B20 + 100 Al2O3, B20 + 50 CeO2, B20 + 100 CeO2). The CRDI engine was run at a constant speed with four different engine loads: 3 kg, 6 kg, 9 kg, and 12 kg. The result showed that the presence of Al2O3 in the blended fuel improved the BTE by 11.39%, reduced the SFC by 13.74%, and increased the cylinder pressure and heat release rate (HRR) by 16.77% and 21.48% respectively compared to B20 fuel at peak load condition. Regarding harmful emissions, CO emissions decreased by 15.06% for B20 + 50 Al2O3 than B20 and HC emissions decreased by 50% for B20 + 50 CeO2 than diesel at peak load. Further, NOx is reduced by 18.29% for B20 + 50 CeO2 than B20 at peak loads. Graphical Abstract


  • An Experimental Assessment of Combustion, Emissions, and Performance Behavior of Diesel Engine Fuelled With New Developed Biofuel Blend of Two Distinct Waste Cooking Oils and Metallic Nano-particle (Al2O3)

    by Suraj Bhan, Raghvendra Gautam, Pushpendra Singh

    In the experimental study, biofuel is extracted from two distinct waste cooking oil of palm and sunflower oil through a transesterification process. A suitable blend B20 (WCPME 10% + WCSME 10% + Diesel 80%) is prepared by mixing diesel in biofuel. After that, using an ultrasonicator, Al2O3 was mixed in B20 at the distinct proportions of 25, 50, and 100 ppm, respectively, and new ternary blends are developed: B20 + 25Al2O3, B20 + 50Al2O3, and B20 + 100Al2O3. The experiment test was performed on a CRDI engine fuelled by Diesel, B20, B20 + 25Al2O3, B20+50Al2O3, and B20 +100Al2O3 samples at a steady speed of 1500 rpm and different engine loads to evaluate engine performance, combustion, and emission characteristics. The test result depicts that BTE extensively improved by 13.53% and SFC reduced by 20.93% for B20 +100 Al2O3 than B20 at full load. The emission characteristics, for example, CO, and HC were altogether decreased with the mixing of nanoparticles in the correlation of B20 and D100 yet there is a slight increment in NOx emissions than B20 and D100. Higher peak points in CPmax and HRRmax reached for B20 +100Al2O3 because of reduced ignition delay than that of B20 and D100.