NHNadira Hassan

Nadira Hassan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nadira Hassan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:

  • Nayan Ranjan Singha

    Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India

    12 shared publications
  • Deepak Chowdhury

    Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India

    11 shared publications
  • Mostafizur Rahaman

    Department of Chemistry, College of Science, King Saud University, Riyadh 11451, Saudi Arabia

    11 shared publications
  • Pijush Kanti Chattopadhyay

    Department of Leather Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India

    11 shared publications
  • Hussain Sanfui

    Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India

    10 shared publications
  • Shrestha Roy

    Advanced Polymer Laboratory, Department of Polymer Science and Technology, Government College of Engineering and Leather Technology (Post Graduate), Maulana Abul Kalam Azad University of Technology, Salt Lake City, Kolkata 700106, West Bengal, India

    10 shared publications

Latest Publications

  • Insights into Local Framework Conformations of pH‐Tunable Electro‐Optic‐Catalytic β ‐Cyclodextrin‐Synthetic Polymer System: Selective Dual‐Mode Sensing and Electrocatalysis of Amino Acids

    by Shrestha Roy, Preetam Nandy, Deepak Chowdhury, Nadira Hassan, Saikat Sarkar, Suman Kalyan Samanta, Mincheol Chang, Mostafizur Rahaman, Narendra Nath Ghosh, Pijush Kanti Chattopadhyay, et al.

    In polymeric system, local framework conformations provide an effective route to generate supramolecular architectures from identical structural units; herein, pH‐tunable realization in electro‐optic‐catalytic semisynthetic‐polymers for dual‐mode fluorogenic‐electrochemical amino acid sensing/ electrocatalysis is reported. Initially, synthetic fluorescent electroactive conducting polymers (FECPs) were synthesized using N , N ‐dimethylacrylamide and cis ‐butenedioic acid through polymerization in an aqueous medium. The optimized FECP3 was modified with β ‐cyclodextrin to rigidify the matrix and fix the orientation of ─C(═O)N/ ─C(═O)OH groups, inducing local framework conformations. Combined computational and pH‐dependent spectroscopic‐electrochemical studies confirmed two local framework conformations in all the β ‐cyclodextrin/FECP3 (LFCFECPs). In optimum LFCFECP2, coexistence of LFCFECP2‐A and LFCFECP2‐B was validated by the excitation‐dependent emission profile and cathodic peaks of C═N + →C • ─N in cyclic voltammogram of LFCFECP2‐A‐/ LFCFECP2‐B‐modified glassy‐carbon electrode (LFCFECP2‐A|GCE/ LFCFECP2‐B|GCE). LFCFECP2‐A and LFCFECP2‐B exhibited pH‐selective dual‐mode sensing, enabling fluorogenic‐electrochemical detection of Tyrosine and Tryptophan in aqueous solution/ cow milk/ soybean extract at pH 6.0 and 8.0, respectively, with rapid response, low detection limits, and high reproducibility. Compared to LFCFECP2‐A|GCE/ LFCFECP2‐B|GCE, LFCFECP2‐A/ LFCFECP2‐B film working‐electrode (WE) displayed a higher electroactive surface area. Therefore, LFCFECP2‐A and LFCFECP2‐B films (WEs) were employed for efficient electrocatalytic conversions of Tyrosine and Tryptophan to Dopaquinone and 3 a ‐hydroxyhexahydropyrrolo[2,3‐ b ]indole‐2‐carboxylic acid with 95.35 and 92.31% conversion efficiencies, respectively.

  • Exploring ICT-FRET in Aliphatic Electroactive Fluorescent Polymers and Fluorometric/Electrochemical/Impedimetric Sensing of Picric Acid in Aqueous and Organic Media

    by Hussain Sanfui, Nadira Hassan, Shrestha Roy, Deepak Chowdhury, Mostafizur Rahaman, Mincheol Chang, Narendra Nath Ghosh, Pijush Kanti Chattopadhyay, Dilip K. Maiti, Nayan Ranjan Singha


  • Synthesis of Polymer Nanohybrids for Glycerol Sensing, Fluorometric Viscosity Detection, and Metal-Free Electrocatalytic Glycerol Oxidation

    by Deepak Chowdhury, Shrestha Roy, Saikat Sarkar, Nadira Hassan, Preetam Nandy, Mincheol Chang, Mostafizur Rahaman, Pijush Kanti Chattopadhyay, Dilip K. Maiti, Nayan Ranjan Singha

    This research provides a constructive approach for developing high-performance polymer nanohybrids toward enhancing optoelectronic properties, fluorogenic viscosity sensing, and metal-free electrocatalytic oxidation of glycerol to value-added organic(s). Herein, reduced graphene oxide (RGO) and mildly oxidized RGO (MRGO) are strategically combined with fluorescent electroactive polymers (FEPs) to develop a promising sustainable metal-free electrocatalytic system suitable for amplifying opto-electrochemical properties, multiplatform sensing capacity, and electrocatalytic efficiency. The optimized polymeric counterpart (FEP2) promotes dual-state emission in the supramolecular network of RGO-/MRGO-incorporated fluorescent electroactive hybrid polymers (RFEHPs/MFEHPs) through physicochemically confined atypical electron-rich -C(═O)NH-/-C(═O)O-/-SO3H fluorophores of (hydroxyethyl)methacrylate and 2-acrylamido-2-methylpropane-1-sulfonic acid monomers. The photophysical processes of the spectroscopically optimized RFEHP1 and MFEHP3 are well explored in the solid state and in solution in order to employ them in viscosity-dependent turn-on fluorogenic detection of mono-/di-/trihydric alcohol in aqueous medium. Again, redox-active O-containing functional groups of FEP2 and RGO/MRGO impart strong electroactivity and substantial electrical conductivity to RFEHPs/MFEHPs. Subsequently, electrochemically optimized RFEHP1 and MFEHP3 are applied to fabricate GCE-RFEHP1 and GCE-MFEHP3 electrodes having maximum open-circuit potentials (1.30 and 1.32 V vs Ag/AgCl) to deliver the glycerol electro-oxidation reaction (GLYOR) in water medium. In the GLYOR, peaks at 1.18 and 1.42 V vs Ag/AgCl for GCE-RFEHP1 indicated the formation of two-/three-carbon-containing glycolate/glycerate along with a significant amount of formate. However, the sole anodic response at 1.42 V vs Ag/AgCl for GCE-MFEHP3 signifies a higher-degree GLYOR producing formate as the major product. The formation of these GLYOR products is confirmed by NMR spectral analyses. Therefore, optoelectrochemically active RFEHP1 and MFEHP3 are implemented in selective and sensitive fluorogenic, voltammetric, and impedimetric sensing of glycerol with appreciably low detection limits. In addition to such multiplatform sensing, high stability and reproducibility of GCE-RFEHP1 and GCE-MFEHP3 electrodes pave way for efficient execution of the metal-free electrocatalytic GLYOR.


  • NiFe2O4/GO-Incorporated Nanohybrid Polymers for Multi-Modal Sensing and Electrocatalytic Oxidation of Phenols

    by Nadira Hassan, Hussain Sanfui, Shrestha Roy, Deepak Chowdhury, Saikat Sarkar, Mostafizur Rahaman, Mincheol Chang, Mohammad A. Hasnat, Pijush Kanti Chattopadhyay, Dilip K. Maiti, et al.


  • Sequentially Synthesized Dual-State Dual-FRET Optoelectronic Polymer-Thiolated Collagen Nanohybrids for Ultra-High S2–/ Cd(II) Relay Sensing and Electrocatalytic Nitrobenzene Reduction

    by Shrestha Roy, Preetam Nandy, Deepak Chowdhury, Nadira Hassan, Hussain Sanfui, Mincheol Chang, Mostafizur Rahaman, Pijush Kanti Chattopadhyay, Nayan Ranjan Singha, Dilip K. Maiti


  • Ultra-High Conductivity of Non-Conjugated Synthetic, Semisynthetic, and Zr(IV)-/ Zn(II)-/ Ni(II)-Coordinated Optoelectronic Polymers for High-Performance Voltammetric/ Impedimetric/ Luminometric Glucose Sensing

    by Shrestha Roy, Deepak Chowdhury, Preetam Nandy, Nadira Hassan, Hussain Sanfui, Arnab Dutta, Mostafizur Rahaman, Pijush Kanti Chattopadhyay, Dilip K. Maiti, Nayan Ranjan Singha


  • Uncovering Integrated Dual‐State ESIPT‐Conductivity, Redox‐Capacity, and Opto‐Electronic Responses Toward Hg(II)/ Cr(III) of Aliphatic Fluorescent Polymers

    by Hussain Sanfui, Nadira Hassan, Shrestha Roy, Deepak Chowdhury, Preetam Nandy, Mincheol Chang, Mostafizur Rahaman, Narendra Nath Ghosh, Swapan Majumdar, Pijush Kanti Chattopadhyay, et al.

    Excited‐state intramolecular proton transfer (ESIPT)‐associated dual‐state emissive aliphatic dual‐light emitting conducting polymers (DLECPs) having oxidation‐reduction capacities are prepared polymerizing 2‐acrylamido‐2‐methylpropane‐1‐sulfonic acid, methacrylic acid, and 2‐methyl‐3‐(N‐(2‐methyl‐1‐sulfopropan‐2‐yl)acrylamido)propanoic acid monomers. Of as‐synthesized DLECPs, nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopies, fluorescent enhancements (I/I0), and computational investigation indicate intriguing photophysical features in DLECP3 (optimum composition). In DLECP3, ─CONH─, ─CON<, and ─COOH subluminophores are recognized by density‐functional theory (DFT)/time‐dependent‐DFT calculations and experimental investigations. ESIPT‐associated dual‐state emission/conductivity, aggregation‐enhanced emissions, selective opto‐electronic responses toward Hg(II)/Cr(III) at 437/574 nm, and redox properties of DLECP3 are supported by solid‐state/solution spectroscopies, time‐correlated single photon counting (TCSPC) measurements, dual‐state excitation dependent emissions, microscopic images, electrochemical measurements, and DFT calculations. Here, preferential interaction of Hg(II)/Cr(III) with DLECP3 (amide)/DLECP3 (imidol) and reduction/oxidation of Hg(II)/Cr(III) to Hg(I)/Cr(VI) are substantiated by UV–vis, FTIR, and X‐ray photoelectron spectroscopies; TCSPC measurements; NMR‐titration; electrochemical studies; alongside computational calculations. The proton‐electrical conductivities of DLECP3, Hg(II/I)‐DLECP3, and Cr(III/VI)‐DLECP3 in solids/solutions are 15.27 × 10−5/6.16 × 10−5, 19.60 × 10−5/25.52 × 10−5, and 26.69 × 10−5/27.60 × 10−5 S cm−1, respectively.


  • Exploring Through-Space Charge Transfer-Mediated Optoelectrochemical Properties of Dual-State Luminescent Aliphatic Polymers and Optoelectronic Responses toward Metal Ions

    by Deepak Chowdhury, Nadira Hassan, Shrestha Roy, Hussain Sanfui, Preetam Nandy, Mincheol Chang, Mostafizur Rahaman, Narendra Nath Ghosh, Mohammad A. Hasnat, Pijush Kanti Chattopadhyay, et al.

    Herein, natural-synthetic hybrid dual-state luminescent conducting polymers (DLCPs/DLCP1-DLCP8) possessing significant optoelectrochemical properties are strategically developed by the polymerization of prop-2-enamide, cis-butenedioic acid, 2-acrylamido-2-methylpropane-1-sulfonic acid, and in situ-generated 2-(3-acrylamidopropanamido)-2-methylpropane-1-sulfonic acid alongside the grafting of gum tragacanth. The spectroscopic data of aliphatic DLCPs affirm DLCP7 as the most stable supramolecular assembly endowing optoelectronic properties. Computational calculations identified -C(═O)NH-, -C(═O)OH, -OH, and -SO3H as subluminophores. The absorption spectra, excitation wavelength-/solvent-polarity-/concentration-dependent luminescence, solid state luminescence, aggregation-induced enhanced luminescence, and time-correlated single photon count (TCSPC) studies confirm the occurrence of aggregation-mediated intramolecular through-space charge transfer (ITSCT) in the excited state of DLCP7. Mulliken charge, natural bond orbital, dipole moments, and electronic potential surface analyses confirm the charge donor-acceptor system in DLCP7. Furthermore, the selective optoelectronic response of DLCP7 toward Ca2+/Cu(II) at 438/574 nm is explored using ultraviolet-visible spectra, TCSPC analyses, a dynamic light scattering study, and computational investigations. The chelation-enhanced luminescence and ITSCT inhibition are responsible for turn-on and turn-off detections of Ca2+ and Cu(II), respectively. Cu(II) → Cu(I) reduction in a DLCP7 solution is inferred from electrochemical and spectroscopic analyses. The conductivities of 9.65 × 10-5 S cm-1 (solid state) and 44.35 × 10-5 S cm-1 (solution) in DLCP7 are validated by current-voltage and electrochemical impedance measurements. Again, strong electronic conductivities of 43.89 × 10-5 S cm-1 (solid state)/53.34 × 10-5 S cm-1 (solution) and 45.42 × 10-5 S cm-1 (solid state)/64.81 × 10-5 S cm-1 (solution) are observed in Ca2+-DLCP7 and Cu(II)-DLCP7, respectively.


  • Synthesis of Semisynthetic Dual-State Fluorescent Polymers and Roles of Starch/Pectin on AIET-Assisted Dual-Emission, Conductivity, and Metal-Ion Sensing

    by Hussain Sanfui, Deepak Chowdhury, Nadira Hassan, Arnab Dutta, Mostafizur Rahaman, Mincheol Chang, Swapan Majumdar, Pijush Kanti Chattopadhyay, Nayan Ranjan Singha


  • Synthesis of Intrinsically‐Fluorescent Aliphatic Tautomeric Polymers for Proton‐Conductivity, Dual‐State Emission, and Sensing/Oxidation‐Reduction of Metal Ions

    by Nadira Hassan, Hussain Sanfui, Deepak Chowdhury, Shrestha Roy, Narendra Nath Ghosh, Mostafizur Rahaman, Mincheol Chang, Mohammad A. Hasnat, Pijush Kanti Chattopadhyay, Nayan Ranjan Singha

    Herein, fluorescent conducting tautomeric polymers (FCTPs) are developed by polymerizing 2‐methylprop‐2‐enoic acid (MPEA), methyl‐2‐methylpropenoate (MMP), N‐(propan‐2‐yl)prop‐2‐enamide (PPE), and in situ‐anchored 3‐(N‐(propan‐2‐yl)prop‐2‐enamido)‐2‐methylpropanoic acid (PPEMPA). Among as‐synthesized FCTPs, the most promising characteristics in FCTP3 are confirmed by NMR and Fourier transform infrared (FTIR) spectroscopies, luminescence enhancements, and computational studies. In FCTP3, ─C(═O)NH─, −C(═O)N<, ─C(═O)OH, and ─C(═O)OCH3 subluminophores are identified by theoretical calculations and experimental analyses. These subluminophores facilitate redox characteristics, solid state emissions, aggregation‐enhanced emissions (AEEs), excited‐state intramolecular proton transfer (ESIPT), and conductivities in FCTP3. The ESIPT‐associated dual emission/AEEs of FCTP3 are elucidated by time correlated single photon counting (TCSPC) investigation, solvent polarity effects, concentration‐dependent emissions, dynamic light scattering (DLS) measurements, field emission scanning electron microscopy images, and computational calculations. The cyclic voltammetry measurements of FCTP3 indicate cumulative redox efficacy of ─C(═O)OH, ─C(═O)NH─/−C(═O)N<, ─C(─O─)═NH+─/─C(─O─)═N+, and ─C(═N)OH functionalities. In FCTP3, ESIPT‐associated dual‐emission enable in the selective detection of Cr(III)/Cu(II) at λem1/λem2 with the limit of detection of 0.0343/0.079 ppb. The preferential interaction of Cr(III)/Cu(II) with FCTP3 (amide)/FCTP3 (imidol) and oxidation/reduction of Cr(III)/Cu(II) to Cr(VI)/Cu(I) are further supported by NMR‐titration; FTIR and X‐ray photoelectron spectroscopy analyses; TCSPC/electrochemical/DLS measurement; alongside theoretical calculations. The proton conductivity of FCTP3 is explored by electrochemical impedance spectroscopy and I–V measurements.