Salvatore Privitera
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Salvatore Privitera has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Emanuele Cerruto
Department of Agriculture, Food and Environment (Di3A), Section of Mechanics and Mechanization, University of Catania, 95123 Catania, Italy
13 shared publications - Giuseppe Manetto
Department of Agriculture, Food and Environment (Di3A), Section of Mechanics and Mechanization, University of Catania, 95123 Catania, Italy
10 shared publications - Sebastian Lupica
Department of Agriculture, Food and Environment (Di3A), Section of Mechanics and Mechanization, University of Catania, 95123 Catania, Italy
8 shared publications - Beatriz Costalonga Vargas
Department of Agricultural Engineering, Federal University of Viçosa, Viçosa 36510-000, MG, Brazil
4 shared publications Giuseppe Manetto
University of Catania
4 shared publications- Marconi Ribeiro Furtado Júnior
Department of Agricultural Engineering, Federal University of Viçosa, Viçosa 36510-000, MG, Brazil
4 shared publications
Latest Publications
- Open Access
Dynamics of Droplet Spectra and Physicochemical Properties Under Different Adjuvants and Spraying Pressures
Droplet size is a key factor in minimizing spray drift. Different types of adjuvants and sprayer operating pressures can affect the droplet size distribution in various ways. This study aimed to evaluate the effects of commercial adjuvants, namely, acids and surfactant (AS), silicone surfactant (SS), organosilicone surfactant (OS), mineral oil (MO and MO2), and copolymer (CP) adjuvants, on the droplet spectra and physicochemical properties of aqueous solutions. Hydrogen potential (pH), volumetric mass (), electrical conductivity (EC), surface tension (ST), contact angle (CA), and droplet spectra were measured. The droplet spectrum variables, including volumetric diameters (, , and ), the Relative Span Factor (), and percentages of the total volume of droplets with a diameter smaller than 100 µm (V100) and larger than 500 µm (V500), were determined using a laser diffraction particle analyzer (Malvern Spraytec). Spraying tests were carried out using the AXI 11003 flat fan nozzle at pressures of (0.1, 0.2, 0.3, 0.4, and 0.5) MPa. The increase in pressure increased the V100 and the , with greater sensitivity observed for SS. Adjuvants such as AS, MO2 and OS showed a more balanced trend, with a smaller increase in fine droplets and a greater reduction in coarse droplets. The principal component analysis (PCA) revealed that the droplet spectrum variables were the ones that best explained the variation among the solutions. A negative correlation was identified between EC and other physicochemical properties, such as pH, ST, and CA. Therefore, these properties alone did not determine the atomization pattern. The study demonstrates that optimizing spray quality and minimizing drift require a combined consideration of adjuvant physicochemical properties and their interaction with operational pressure.Open AccessDynamics of Droplet Spectra and Physicochemical Properties Under Different Adjuvants and Spraying Pressures
Droplet size is a key factor in minimizing spray drift. Different types of adjuvants and sprayer operating pressures can affect the droplet size distribution in various ways. This study aimed to evaluate the effects of commercial adjuvants, namely, acids and surfactant (AS), silicone surfactant (SS), organosilicone surfactant (OS), mineral oil (MO and MO2), and copolymer (CP) adjuvants, on the droplet spectra and physicochemical properties of aqueous solutions. Hydrogen potential (pH), volumetric mass (), electrical conductivity (EC), surface tension (ST), contact angle (CA), and droplet spectra were measured. The droplet spectrum variables, including volumetric diameters (, , and ), the Relative Span Factor (), and percentages of the total volume of droplets with a diameter smaller than 100 µm (V100) and larger than 500 µm (V500), were determined using a laser diffraction particle analyzer (Malvern Spraytec). Spraying tests were carried out using the AXI 11003 flat fan nozzle at pressures of (0.1, 0.2, 0.3, 0.4, and 0.5) MPa. The increase in pressure increased the V100 and the , with greater sensitivity observed for SS. Adjuvants such as AS, MO2 and OS showed a more balanced trend, with a smaller increase in fine droplets and a greater reduction in coarse droplets. The principal component analysis (PCA) revealed that the droplet spectrum variables were the ones that best explained the variation among the solutions. A negative correlation was identified between EC and other physicochemical properties, such as pH, ST, and CA. Therefore, these properties alone did not determine the atomization pattern. The study demonstrates that optimizing spray quality and minimizing drift require a combined consideration of adjuvant physicochemical properties and their interaction with operational pressure. - Open Access
- 28 February 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (5) , 557
Bibliometric and Scientometric Analysis of the Application of Agricultural Pesticides at Variable Rates
The application of plant protection products (PPPs) at variable rates has gained prominence as a key strategy in precision agriculture (PA), promoting the rational use of inputs (water, fertilizers, pesticides) while improving crop yields and mitigating the environmental impacts (e.g., drift, evaporation, run-off). Despite the rapid growth of variable-rate application (VRA) systems, large-scale adoption remains fragmented, with strong emphasis on technological development and limited integration of economic, operational, and environmental assessment. To critically assess how research on VRA of PPPs has evolved and where significant knowledge gaps persist, this study conducted a bibliometric and scientometric analysis of the relevant literature aimed at mapping the scientific evolution, identifying trends and analyzing the gaps that limit the consolidation of the VRA domain. By identifying these imbalances, this study provides a critical reference framework to drive future research toward more robust, comparable, and globally relevant VRA solutions in PPP applications. Scopus and Web of Science (WoS) databases were used, encompassing English-language scientific articles published between 2005 and 2025. The search strategy combined two sets of terms related to PPP application and variable-rate systems. The VOSviewer software was utilized for quantitative analysis. The bibliometric analysis assessed the temporal and geographical distribution of publications and identified the most productive authors, while the scientometric analysis visualized keyword co-occurrence networks and citation patterns among authors and countries. The results indicated that research activity culminated in a significant peak during the 2020–2024 period, with an upward trajectory for partial data of 2025. The United States and China emerged as leading contributors to scientific output. The most frequent keywords revealed the advancement of technologies such as pulse width modulation (PWM) technology, sensors, and automation. Although this research area is rapidly expanding, its consolidation still requires greater geographical participation and deeper technical exploration across various research fronts.
- 28 February 2026
- Published by MDPI AG in Agriculture
- Vol. 16 (5) , 557
Open AccessBibliometric and Scientometric Analysis of the Application of Agricultural Pesticides at Variable Rates
The application of plant protection products (PPPs) at variable rates has gained prominence as a key strategy in precision agriculture (PA), promoting the rational use of inputs (water, fertilizers, pesticides) while improving crop yields and mitigating the environmental impacts (e.g., drift, evaporation, run-off). Despite the rapid growth of variable-rate application (VRA) systems, large-scale adoption remains fragmented, with strong emphasis on technological development and limited integration of economic, operational, and environmental assessment. To critically assess how research on VRA of PPPs has evolved and where significant knowledge gaps persist, this study conducted a bibliometric and scientometric analysis of the relevant literature aimed at mapping the scientific evolution, identifying trends and analyzing the gaps that limit the consolidation of the VRA domain. By identifying these imbalances, this study provides a critical reference framework to drive future research toward more robust, comparable, and globally relevant VRA solutions in PPP applications. Scopus and Web of Science (WoS) databases were used, encompassing English-language scientific articles published between 2005 and 2025. The search strategy combined two sets of terms related to PPP application and variable-rate systems. The VOSviewer software was utilized for quantitative analysis. The bibliometric analysis assessed the temporal and geographical distribution of publications and identified the most productive authors, while the scientometric analysis visualized keyword co-occurrence networks and citation patterns among authors and countries. The results indicated that research activity culminated in a significant peak during the 2020–2024 period, with an upward trajectory for partial data of 2025. The United States and China emerged as leading contributors to scientific output. The most frequent keywords revealed the advancement of technologies such as pulse width modulation (PWM) technology, sensors, and automation. Although this research area is rapidly expanding, its consolidation still requires greater geographical participation and deeper technical exploration across various research fronts.
- Open Access
Shutter Speed Influences the Capability of a Low-Cost Multispectral Sensor to Estimate Turfgrass (Cynodon dactylon L.—Poaceae) Vegetation Vigor Under Different Solar Radiation Conditions
Radiometric calibration of multispectral imagery plays a critical role in the determination of vegetation-related features. This radiometric calibration strongly depends on a proper sensor configuration when acquiring images, the shutter speed being a critical parameter. The objective of the present study was to appraise the influence of shutter speed on the reflectance in the visible and near-infrared (NIR) spectral regions registered by a low-cost multispectral sensor (MAPIR Survey3) on a homogeneous field of turfgrass (Cynodon dactylon L.—Poaceae) and on the vegetation index (VI) values calculated from them, under different solar radiation conditions. For this purpose, 10 shutter speed configurations were tested in field campaigns with variable solar radiation values. The main results demonstrated that the reflectance in the green spectral region was more sensitive to shutter speed than that of the red and NIR spectral regions, particularly under high solar radiation conditions. Moreover, VIs calculated using the green band were more sensitive to slow shutter speeds, thus presenting a higher probability of providing meaningless artifact values. In conclusion, this study provides shutter speed recommendations under different illumination conditions to optimize the reflectance and the VI sensitivity within the image, which can be applied as a simple method to optimize image acquisition from unmanned aerial vehicles under varying solar radiation conditions.
Open AccessShutter Speed Influences the Capability of a Low-Cost Multispectral Sensor to Estimate Turfgrass (Cynodon dactylon L.—Poaceae) Vegetation Vigor Under Different Solar Radiation Conditions
Radiometric calibration of multispectral imagery plays a critical role in the determination of vegetation-related features. This radiometric calibration strongly depends on a proper sensor configuration when acquiring images, the shutter speed being a critical parameter. The objective of the present study was to appraise the influence of shutter speed on the reflectance in the visible and near-infrared (NIR) spectral regions registered by a low-cost multispectral sensor (MAPIR Survey3) on a homogeneous field of turfgrass (Cynodon dactylon L.—Poaceae) and on the vegetation index (VI) values calculated from them, under different solar radiation conditions. For this purpose, 10 shutter speed configurations were tested in field campaigns with variable solar radiation values. The main results demonstrated that the reflectance in the green spectral region was more sensitive to shutter speed than that of the red and NIR spectral regions, particularly under high solar radiation conditions. Moreover, VIs calculated using the green band were more sensitive to slow shutter speeds, thus presenting a higher probability of providing meaningless artifact values. In conclusion, this study provides shutter speed recommendations under different illumination conditions to optimize the reflectance and the VI sensitivity within the image, which can be applied as a simple method to optimize image acquisition from unmanned aerial vehicles under varying solar radiation conditions.
- Open Access
- 12 October 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (10) , 346
Toward Modern Pesticide Use Reduction Strategies in Advancing Precision Agriculture: A Bibliometric Review
Precision agriculture technologies (PATs) are revolutionizing the agricultural sector by minimizing the reliance on plant protection products (PPPs) in crop management. This approach integrates a broad range of advanced solutions employed to help farmers in optimizing PPP application, while minimizing input and maintaining effective crop protection. These technologies include sensors, drones, robotics, variable rate systems, and artificial intelligence (AI) tools that support site-specific pesticide applications. The objective of this review was to perform a bibliometric analysis to identify scientific trends and gaps in this field. The analysis was conducted using Scopus and Web of Science databases for the period of 2015–2024, by applying a data filtering process to ensure a clean and reliable dataset. The methodology involved citation, co-authorship, co-citation, and co-occurrence analysis. VOSviewer software (version 1.6.20) was used to generate maps and assess global research developments. Results identified AI, sensor, and data processing categories as the most central and interconnected scientific topics, emphasizing their vital role in the evolution of precision spraying technology. Bibliometric analysis highlighted that China, the United States, and India were the most productive countries, with strong collaborations within Europe. The co-occurrence and co-citation analyses revealed increasing interdisciplinarity and the integration of AI tools across various technologies. These findings help identify key experts and research leaders in the precision agriculture domain, thus underscoring the shift toward a more sustainable, data-driven, and synergistic approach in crop protection.
- 12 October 2025
- Published by MDPI AG in Agriengineering
- Vol. 7 (10) , 346
Open AccessToward Modern Pesticide Use Reduction Strategies in Advancing Precision Agriculture: A Bibliometric Review
Precision agriculture technologies (PATs) are revolutionizing the agricultural sector by minimizing the reliance on plant protection products (PPPs) in crop management. This approach integrates a broad range of advanced solutions employed to help farmers in optimizing PPP application, while minimizing input and maintaining effective crop protection. These technologies include sensors, drones, robotics, variable rate systems, and artificial intelligence (AI) tools that support site-specific pesticide applications. The objective of this review was to perform a bibliometric analysis to identify scientific trends and gaps in this field. The analysis was conducted using Scopus and Web of Science databases for the period of 2015–2024, by applying a data filtering process to ensure a clean and reliable dataset. The methodology involved citation, co-authorship, co-citation, and co-occurrence analysis. VOSviewer software (version 1.6.20) was used to generate maps and assess global research developments. Results identified AI, sensor, and data processing categories as the most central and interconnected scientific topics, emphasizing their vital role in the evolution of precision spraying technology. Bibliometric analysis highlighted that China, the United States, and India were the most productive countries, with strong collaborations within Europe. The co-occurrence and co-citation analyses revealed increasing interdisciplinarity and the integration of AI tools across various technologies. These findings help identify key experts and research leaders in the precision agriculture domain, thus underscoring the shift toward a more sustainable, data-driven, and synergistic approach in crop protection.
- 13 April 2025
- Published by Springer Nature
- p. 688-696
Drop Stain Analysis on Water Sensitive Papers
- Open Access
- 6 March 2025
- Published by Elsevier in Smart Agricultural Technology
- Vol. 11
Shape descriptor analysis of droplet stains on water sensitive papers
- 6 March 2025
- Published by Elsevier in Smart Agricultural Technology
- Vol. 11
Open AccessShape descriptor analysis of droplet stains on water sensitive papers
- Open Access
- 11 December 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (12)
Effect of Adjuvants on Physical–Chemical Properties, Droplet Size, and Drift Reduction Potential
Adjuvants alter the physical–chemical properties of pesticide formulations, influencing either the droplet size or drift phenomenon. Selecting the appropriate adjuvant and understanding its characteristics can contribute to the efficiency of Plant Protection Product (PPP) application. This reduces drift losses and promotes better deposition on the crop. The objective of this study was to evaluate the effects of four commercial adjuvants based on mineral oil (Agefix and Assist), vegetable oil (Aureo), and polymer (BREAK-THRU) on the physical–chemical properties (surface tension, contact angle, volumetric mass, electrical conductivity, and pH), droplet size, and drift, using pure water as the control treatment (no adjuvant). Surface tension and contact angle were measured with a DSA30 droplet shape analyzer, while droplet size measurements were determined through a laser diffraction particle analyzer (Malvern Spraytec), using a single flat fan spray nozzle (AXI 110 03) operating at 0.3 MPa. Drift reduction potential was evaluated inside a wind tunnel with an air speed of 2 m s−1. All adjuvants reduced surface tension and contact angle compared to water. volumetric median diameter (VMD) increased for Aureo, Assist, and Agefix, generating coarse, medium, and medium droplets, respectively, while BREAK-THRU formed fine droplets, similar to those generated by water. Aureo had the greatest reduction in Relative Span Factor (RSF), with a reduction of 30.3%. Overall, Aureo, Assist, and Agefix adjuvants significantly reduced the percentage of droplets 500 µm. Drift reduction potential was achieved for all adjuvants, with Aureo showing the highest reduction of 59.35%. The study confirms that selecting the appropriate adjuvant can improve PPP application and promote environmental sustainability in agricultural practices.
- 11 December 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (12)
Open AccessEffect of Adjuvants on Physical–Chemical Properties, Droplet Size, and Drift Reduction Potential
Adjuvants alter the physical–chemical properties of pesticide formulations, influencing either the droplet size or drift phenomenon. Selecting the appropriate adjuvant and understanding its characteristics can contribute to the efficiency of Plant Protection Product (PPP) application. This reduces drift losses and promotes better deposition on the crop. The objective of this study was to evaluate the effects of four commercial adjuvants based on mineral oil (Agefix and Assist), vegetable oil (Aureo), and polymer (BREAK-THRU) on the physical–chemical properties (surface tension, contact angle, volumetric mass, electrical conductivity, and pH), droplet size, and drift, using pure water as the control treatment (no adjuvant). Surface tension and contact angle were measured with a DSA30 droplet shape analyzer, while droplet size measurements were determined through a laser diffraction particle analyzer (Malvern Spraytec), using a single flat fan spray nozzle (AXI 110 03) operating at 0.3 MPa. Drift reduction potential was evaluated inside a wind tunnel with an air speed of 2 m s−1. All adjuvants reduced surface tension and contact angle compared to water. volumetric median diameter (VMD) increased for Aureo, Assist, and Agefix, generating coarse, medium, and medium droplets, respectively, while BREAK-THRU formed fine droplets, similar to those generated by water. Aureo had the greatest reduction in Relative Span Factor (RSF), with a reduction of 30.3%. Overall, Aureo, Assist, and Agefix adjuvants significantly reduced the percentage of droplets 500 µm. Drift reduction potential was achieved for all adjuvants, with Aureo showing the highest reduction of 59.35%. The study confirms that selecting the appropriate adjuvant can improve PPP application and promote environmental sustainability in agricultural practices.
- 1 September 2024
- Published by Springer Nature
- p. 494-504
Preliminary Results on the Correlation Between Drop Size, Foliar Deposition and Surface Coverage to Reduce Plant Protection Product Use
- 1 September 2024
- Published by Springer Nature
- p. 494-504
Preliminary Results on the Correlation Between Drop Size, Foliar Deposition and Surface Coverage to Reduce Plant Protection Product Use
- Open Access
- 19 July 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (7) , 1191
Comparison between Liquid Immersion, Laser Diffraction, PDPA, and Shadowgraphy in Assessing Droplet Size from Agricultural Nozzles
Spray droplet diameters play a key role in the field of liquid plant protection product (PPP) application technology. However, the availability of various measurement techniques, each with its unique operating principles for evaluating droplet size spectra, can lead to different interpretations of spray characteristics. Therefore, in this study, four measurement techniques—Liquid Immersion (LI), Laser Diffraction (LD), Phase Doppler Particle Analysis (PDPA), and Shadowgraphy (SG)—were utilized to evaluate the droplet size distribution of agricultural spray nozzles. Additionally, PDPA and SG were used to assess the average velocity of spray droplets. Experiments were conducted in three different laboratories with the main aim of comparing results obtained with various types of equipment utilized under ordinary practical conditions. Spraying tests were carried out using three flat fan nozzles and an air-induction flat fan nozzle. As a general trend, the lowest values for droplet diameters were measured using the Laser Diffraction technique, followed by Shadowgraphy. The PDPA technique provided the highest values for mean diameters (D10, D20, and D30) and the numeric median diameter (Dn0.5), whereas the Liquid Immersion method yielded the highest values for the Sauter mean diameter (D32) and volumetric diameters (Dv0.1, Dv0.5, and Dv0.9). Importantly, all measurement techniques were able to discriminate the four nozzles based on their Dv0.5 diameter. Average droplet velocities showed a similar pattern across the four nozzles with the PDPA and the SG measurement techniques. The differences in diameter values observed with the four measurement techniques underline the necessity of always including reference nozzles in spray quality assessments to base classifications on relative rather than absolute values.
- 19 July 2024
- Published by MDPI AG in Agriculture
- Vol. 14 (7) , 1191
Open AccessComparison between Liquid Immersion, Laser Diffraction, PDPA, and Shadowgraphy in Assessing Droplet Size from Agricultural Nozzles
Spray droplet diameters play a key role in the field of liquid plant protection product (PPP) application technology. However, the availability of various measurement techniques, each with its unique operating principles for evaluating droplet size spectra, can lead to different interpretations of spray characteristics. Therefore, in this study, four measurement techniques—Liquid Immersion (LI), Laser Diffraction (LD), Phase Doppler Particle Analysis (PDPA), and Shadowgraphy (SG)—were utilized to evaluate the droplet size distribution of agricultural spray nozzles. Additionally, PDPA and SG were used to assess the average velocity of spray droplets. Experiments were conducted in three different laboratories with the main aim of comparing results obtained with various types of equipment utilized under ordinary practical conditions. Spraying tests were carried out using three flat fan nozzles and an air-induction flat fan nozzle. As a general trend, the lowest values for droplet diameters were measured using the Laser Diffraction technique, followed by Shadowgraphy. The PDPA technique provided the highest values for mean diameters (D10, D20, and D30) and the numeric median diameter (Dn0.5), whereas the Liquid Immersion method yielded the highest values for the Sauter mean diameter (D32) and volumetric diameters (Dv0.1, Dv0.5, and Dv0.9). Importantly, all measurement techniques were able to discriminate the four nozzles based on their Dv0.5 diameter. Average droplet velocities showed a similar pattern across the four nozzles with the PDPA and the SG measurement techniques. The differences in diameter values observed with the four measurement techniques underline the necessity of always including reference nozzles in spray quality assessments to base classifications on relative rather than absolute values.