Raghav Sai Thiagarajan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Raghav Sai Thiagarajan has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Venkat R. Subramanian
The University of Texas at Austin
19 shared publications - Taylor Reed Garrick
Global Virtual Electrification and Powertrain, General Motors, Warren, Michigan 48092
10 shared publications - Lubhani Mishra
The University of Texas at Austin
9 shared publications - Akshay Subramaniam
Walker Department of Mechanical Engineering & Materials Science Engineering, University of Texas System, Department of Mech. Engineering, The University of Texas at Austin, Engineering Teaching Center II, 204 E Dean Keeton St, Austin, Texas, 78712, UNITED STATES
5 shared publications - Tushar Telmasre
The University of Texas at Austin
5 shared publications - Judith A. Jeevarajan
UL Research Institutes
4 shared publications
Latest Publications
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (28) , 1441
Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Dimensional Form for Spherical, Cylindrical, and Rectangular Coordinates
The pseudo-two-dimensional (P2D) model by Doyle et al.1 has been widely used due to its ability to accurately capture battery dynamics such as lithium diffusion, transport and reaction, which enables accurate state estimation and provides a pathway to capture degradation dynamics under nominal and edge use cases. The model solves the solid-phase lithium diffusion in active material particles using Fick’s second law, typically assuming a spherical geometry. The equation is usually solved with finite difference methods (FDM) due to the simplicity and ease of implementation. However, this technique generates numerous differential algebraic equations (DAEs) due to the high number of node points, which substantially increases the computational burden particularly while attempting to model multiple cells in a battery pack. FDM-based approaches are also susceptible to numerical challenges during dynamic or high currents, and low temperatures due to larger requirement of node points.2,3 Moreover, it has been shown that FDMs can fail to ensure mass conservation even with 150 internal points in the radial dimension.4
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (28) , 1441
Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Dimensional Form for Spherical, Cylindrical, and Rectangular Coordinates
The pseudo-two-dimensional (P2D) model by Doyle et al.1 has been widely used due to its ability to accurately capture battery dynamics such as lithium diffusion, transport and reaction, which enables accurate state estimation and provides a pathway to capture degradation dynamics under nominal and edge use cases. The model solves the solid-phase lithium diffusion in active material particles using Fick’s second law, typically assuming a spherical geometry. The equation is usually solved with finite difference methods (FDM) due to the simplicity and ease of implementation. However, this technique generates numerous differential algebraic equations (DAEs) due to the high number of node points, which substantially increases the computational burden particularly while attempting to model multiple cells in a battery pack. FDM-based approaches are also susceptible to numerical challenges during dynamic or high currents, and low temperatures due to larger requirement of node points.2,3 Moreover, it has been shown that FDMs can fail to ensure mass conservation even with 150 internal points in the radial dimension.4
- Open Access
- 25 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (10) , 100507
Efficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Lithium-Ion Battery Models Using Symmetric Polynomials: Part II. Dimensional Form for Spherical, Cylindrical, and Rectangular Coordinates
Solving the solid-state diffusion equation in a typical pseudo-two-dimensional (P2D) battery model using conventional finite difference methods (FDM) substantially increases the model complexity (in terms of number of equations) as well as the computational time. In our previous work, we approximated the solid-state diffusion in spherical particles using Galerkin weak form method based on symmetric polynomials, which significantly improved the robustness of modeling, achieving a tenfold reduction in computational time, even for non-linear diffusion problems. However, we found that the equations represented in non-dimensional form for mathematical compactness are relatively difficult to interpret and apply in P2D and other battery models. Therefore, as a follow-up to previous work, we present the weak form formulations of solid-state diffusion in dimensional form to provide better physical interpretation and easier adaptability to battery modeling and other applications. Further, considering diverse particle morphologies in modern battery materials, we extend these formulations for cylindrical and rectangular coordinates, in addition to the spherical coordinate. We also present simulations using various experimentally reported concentration-dependent diffusivities and find that the solution convergence is strongly influenced by the degree and order of non-linearity in diffusion. The study enables the proposed formulation to be widely applicable facilitating accurate and fast simulations.
- 25 May 2026
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (10) , 100507
Open AccessEfficient Reformulation of Linear and Nonlinear Solid-Phase Diffusion in Lithium-Ion Battery Models Using Symmetric Polynomials: Part II. Dimensional Form for Spherical, Cylindrical, and Rectangular Coordinates
Solving the solid-state diffusion equation in a typical pseudo-two-dimensional (P2D) battery model using conventional finite difference methods (FDM) substantially increases the model complexity (in terms of number of equations) as well as the computational time. In our previous work, we approximated the solid-state diffusion in spherical particles using Galerkin weak form method based on symmetric polynomials, which significantly improved the robustness of modeling, achieving a tenfold reduction in computational time, even for non-linear diffusion problems. However, we found that the equations represented in non-dimensional form for mathematical compactness are relatively difficult to interpret and apply in P2D and other battery models. Therefore, as a follow-up to previous work, we present the weak form formulations of solid-state diffusion in dimensional form to provide better physical interpretation and easier adaptability to battery modeling and other applications. Further, considering diverse particle morphologies in modern battery materials, we extend these formulations for cylindrical and rectangular coordinates, in addition to the spherical coordinate. We also present simulations using various experimentally reported concentration-dependent diffusivities and find that the solution convergence is strongly influenced by the degree and order of non-linearity in diffusion. The study enables the proposed formulation to be widely applicable facilitating accurate and fast simulations.
- Open Access
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 120526
Simulating Over-Discharge in Lithium-Ion Battery Packs-Cell Variability and Cycle Life Studies
Batteries are vital for enabling renewable energy use and reducing carbon emissions, with lithium-ion (Li-ion) batteries favored for their high energy density and fast charging. High-voltage battery packs use thousands of Li-ion cells in complex configurations, where extrapolation from single-cell models fails to predict overall behavior due to cell-to-cell variation, thermal gradients, and manufacturing inconsistencies. Over-discharge, an electrochemical abuse condition, can lead to irreversible damage, capacity degradation, and safety hazards. Critically, overdischarge events cannot be reliably detected at the individual cell level within a module, complicating early intervention strategies. To address this, a simulation framework using the thermal Tanks-in-Series (TiS) model for individual cells and packs has been developed and compared with the pseudo-two-dimensional (p2D) model, enabling accurate and fast prediction of pack-level performance. The model is utilized to investigate the impact of non-uniformities among the cells in the pack both at initial cycle and after long-term cycling. The impact of their spatial location within the pack is also studied. The developed framework accurately predicts the pack-level performance and is computationally efficient, facilitating improved battery design.
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 120526
Open AccessSimulating Over-Discharge in Lithium-Ion Battery Packs-Cell Variability and Cycle Life Studies
Batteries are vital for enabling renewable energy use and reducing carbon emissions, with lithium-ion (Li-ion) batteries favored for their high energy density and fast charging. High-voltage battery packs use thousands of Li-ion cells in complex configurations, where extrapolation from single-cell models fails to predict overall behavior due to cell-to-cell variation, thermal gradients, and manufacturing inconsistencies. Over-discharge, an electrochemical abuse condition, can lead to irreversible damage, capacity degradation, and safety hazards. Critically, overdischarge events cannot be reliably detected at the individual cell level within a module, complicating early intervention strategies. To address this, a simulation framework using the thermal Tanks-in-Series (TiS) model for individual cells and packs has been developed and compared with the pseudo-two-dimensional (p2D) model, enabling accurate and fast prediction of pack-level performance. The model is utilized to investigate the impact of non-uniformities among the cells in the pack both at initial cycle and after long-term cycling. The impact of their spatial location within the pack is also studied. The developed framework accurately predicts the pack-level performance and is computationally efficient, facilitating improved battery design.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (54) , 2636
Scaling Single Cells to Pack-Level Simulations Using a Physics-Based Tanks-in-Series Model: Examining Cell-to-Cell Variation, over-Discharge and Capacity Fade
Batteries as an energy storage solution will play a key role in the transition to renewable sources of energy and reducing the impact of carbon emissions on the climate. Lithium-ion (Li-ion) batteries are a prime candidate for such applications due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage. 1,2 High voltage battery systems used in the applications stated above make use of several thousand single Li-ion cells, connected in series and parallel combinations, to achieve the desired pack level characteristics. Rich literature is available on the physics-based modeling of single Li-ion cells, however simple extrapolations of these models from the cell level to the pack level cannot accurately predict pack behavior, especially during short times 3 . Cell-to-cell variations, quality of manufacturing, series-parallel connection combinations, and thermal gradients across a pack affect the behavior of each component cell in a single cycle and the overall pack behavior with cycling. 4 Li-ion batteries, where several cells are connected in series, can also experience inadvertent over-discharge due to differences between cells 5,6 . Over-discharge is a condition when the manufacturer recommended lower voltage limit is crossed while discharging, which results in various side effects such as electrolyte decomposition, capacity degradation due to copper dissolution and deposition, SEI layer breakdown, possible internal short circuit and an increase in cell temperature. These effects on a single cell level can lead to the under-utilization of cells connected in series and over-utilization of the cells connected in parallel, due to nature of current distribution in different regions of the pack dictated by the net resistance from each cell. Temperature plays a key role in the electrochemical performance of individual cells, affecting the diffusivities of ions, kinetics of reactions and rate of degradation of the battery. A physics-based modeling approach coupled with a thermal model, with appropriate voltage and current relations, can be employed to scale simulations from a cell to a pack level. This model can then enhance understanding on the effect of over-discharge on the electrochemical behavior of Li-ion batteries and provides insights into the interplay of various degradation mechanisms that cause capacity fade in battery-packs. The Thermal Tank-In-Series 7,8 (TTiS) model is a systematically volume-averaged form of the standard pseudo-2-dimensional (p2D) 9 model with energy balance equations for the current collectors, cathode, separator and anode. This reduces the number of equations in the model and improves computational speed while maintaining accuracy. Including variable-diffusivity in the solid phase equations 10 helps predict the overpotential changes to the cell electrodes and thermodynamics, as it is sensitive to changes in the battery’s state of charge (SOC) and cell temperature. We have developed a framework to simulate each cell in a pack using individual TTiS models, appropriately connected in parallel and series, to quantify the impact of cell-to-cell variation on pack level outputs as a function of cell capacity, internal parameter variations and cell location in the pack. A comparison of computational times will highlight the benefits of using such an approach to scale cell level models reliably, with robust initialization of the model and ensuring accuracy of predictions. References S. P. S. Badwal, S. S. Giddey, C. Munnings, A. I. Bhatt, and A. F. Hollenkamp, Frontiers in Chemistry , 2 , 28 (2014). G. Pistoia. Lithium-Ion Batteries: Advances and Applications . First ed. Elsevier, Amsterdam (2014). T.K. Telmasre, L. Mishra, R.S. Thiagarajan, A. Subramaniam, V. Ramadesigan, T.R. Garrick, V. R. Subramanian, J. Electrochem. Soc. 170 103512 (2023) T. Weaver, A. Allam and S. Onori, 2020 American Control Conference (ACC) pp. 365-372 R. Guo, L. Lu., M. Ouyang, X. Feng. Sci Rep 6 , 30248 (2016). G. Zhang, X. Wei, S. Chen, J. Zhu, G. Han, and H. Dai. J. Power Sources , 521 , 230990. (2022). Subramaniam, S. Kolluri, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc. , 167 , 113506 (2020). 8. A. Subramaniam, S. Kolluri, C. D. Parke, M. Pathak, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc. , 167 , 013534 (2020). Doyle, T. F. Fuller, and J. Newman, J. Electrochem. Soc ., 140 , 1526 (1993) S. Thiagarajan, A. Subramaniam, S. Kolluri, T. R. Garrick, Y. Preger, V. D. Angelis, J. Lim, and V. R. Subramanian, J. Electrochem. Soc. , 170 , 010528 (2023)
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (54) , 2636
Scaling Single Cells to Pack-Level Simulations Using a Physics-Based Tanks-in-Series Model: Examining Cell-to-Cell Variation, over-Discharge and Capacity Fade
Batteries as an energy storage solution will play a key role in the transition to renewable sources of energy and reducing the impact of carbon emissions on the climate. Lithium-ion (Li-ion) batteries are a prime candidate for such applications due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage. 1,2 High voltage battery systems used in the applications stated above make use of several thousand single Li-ion cells, connected in series and parallel combinations, to achieve the desired pack level characteristics. Rich literature is available on the physics-based modeling of single Li-ion cells, however simple extrapolations of these models from the cell level to the pack level cannot accurately predict pack behavior, especially during short times 3 . Cell-to-cell variations, quality of manufacturing, series-parallel connection combinations, and thermal gradients across a pack affect the behavior of each component cell in a single cycle and the overall pack behavior with cycling. 4 Li-ion batteries, where several cells are connected in series, can also experience inadvertent over-discharge due to differences between cells 5,6 . Over-discharge is a condition when the manufacturer recommended lower voltage limit is crossed while discharging, which results in various side effects such as electrolyte decomposition, capacity degradation due to copper dissolution and deposition, SEI layer breakdown, possible internal short circuit and an increase in cell temperature. These effects on a single cell level can lead to the under-utilization of cells connected in series and over-utilization of the cells connected in parallel, due to nature of current distribution in different regions of the pack dictated by the net resistance from each cell. Temperature plays a key role in the electrochemical performance of individual cells, affecting the diffusivities of ions, kinetics of reactions and rate of degradation of the battery. A physics-based modeling approach coupled with a thermal model, with appropriate voltage and current relations, can be employed to scale simulations from a cell to a pack level. This model can then enhance understanding on the effect of over-discharge on the electrochemical behavior of Li-ion batteries and provides insights into the interplay of various degradation mechanisms that cause capacity fade in battery-packs. The Thermal Tank-In-Series 7,8 (TTiS) model is a systematically volume-averaged form of the standard pseudo-2-dimensional (p2D) 9 model with energy balance equations for the current collectors, cathode, separator and anode. This reduces the number of equations in the model and improves computational speed while maintaining accuracy. Including variable-diffusivity in the solid phase equations 10 helps predict the overpotential changes to the cell electrodes and thermodynamics, as it is sensitive to changes in the battery’s state of charge (SOC) and cell temperature. We have developed a framework to simulate each cell in a pack using individual TTiS models, appropriately connected in parallel and series, to quantify the impact of cell-to-cell variation on pack level outputs as a function of cell capacity, internal parameter variations and cell location in the pack. A comparison of computational times will highlight the benefits of using such an approach to scale cell level models reliably, with robust initialization of the model and ensuring accuracy of predictions. References S. P. S. Badwal, S. S. Giddey, C. Munnings, A. I. Bhatt, and A. F. Hollenkamp, Frontiers in Chemistry , 2 , 28 (2014). G. Pistoia. Lithium-Ion Batteries: Advances and Applications . First ed. Elsevier, Amsterdam (2014). T.K. Telmasre, L. Mishra, R.S. Thiagarajan, A. Subramaniam, V. Ramadesigan, T.R. Garrick, V. R. Subramanian, J. Electrochem. Soc. 170 103512 (2023) T. Weaver, A. Allam and S. Onori, 2020 American Control Conference (ACC) pp. 365-372 R. Guo, L. Lu., M. Ouyang, X. Feng. Sci Rep 6 , 30248 (2016). G. Zhang, X. Wei, S. Chen, J. Zhu, G. Han, and H. Dai. J. Power Sources , 521 , 230990. (2022). Subramaniam, S. Kolluri, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc. , 167 , 113506 (2020). 8. A. Subramaniam, S. Kolluri, C. D. Parke, M. Pathak, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc. , 167 , 013534 (2020). Doyle, T. F. Fuller, and J. Newman, J. Electrochem. Soc ., 140 , 1526 (1993) S. Thiagarajan, A. Subramaniam, S. Kolluri, T. R. Garrick, Y. Preger, V. D. Angelis, J. Lim, and V. R. Subramanian, J. Electrochem. Soc. , 170 , 010528 (2023)
- Open Access
- 1 May 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (5) , 050534
Modeling the Effect of Over-discharge Cycling on Li-ion Batteries
Off-nominal circumstances inducing cell over-discharge in a battery are of concern due to electrolyte decomposition and prolonged degradation effects. Copper dissolution and its subsequent deposition could lead to high cell temperatures and, in some cases, catastrophic failures during the battery’s operational lifetime. Extending physics-based lithium-ion battery models for the purpose of simulating over-discharge conditions require key considerations in model parameters, constitutive equations, and the state of charge window of operation. This paper reports a reduced-order model for over-discharge and simulating its effect under various scenarios using a thermal tanks-in-series (TTiS) approach. The model was used to compare voltage-time behavior and capacity fade during cycling for different over-discharge cycling protocols. The efficacy of cycling simulations was validated with experimental data, and the TTiS model demonstrates reasonable agreement with the voltage, temperature, and capacity fade trends under the given experimental cycling regimes.
- 1 May 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (5) , 050534
Open AccessModeling the Effect of Over-discharge Cycling on Li-ion Batteries
Off-nominal circumstances inducing cell over-discharge in a battery are of concern due to electrolyte decomposition and prolonged degradation effects. Copper dissolution and its subsequent deposition could lead to high cell temperatures and, in some cases, catastrophic failures during the battery’s operational lifetime. Extending physics-based lithium-ion battery models for the purpose of simulating over-discharge conditions require key considerations in model parameters, constitutive equations, and the state of charge window of operation. This paper reports a reduced-order model for over-discharge and simulating its effect under various scenarios using a thermal tanks-in-series (TTiS) approach. The model was used to compare voltage-time behavior and capacity fade during cycling for different over-discharge cycling protocols. The efficacy of cycling simulations was validated with experimental data, and the TTiS model demonstrates reasonable agreement with the voltage, temperature, and capacity fade trends under the given experimental cycling regimes.
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (1) , 67
Efficient Reformulation of Lithium-Ion Battery Models Using Symmetric Polynomials: Extending to Phase Field Models
Energy storage will play a crucial role in the transition to clean and renewable sources of energy production to meet future consumption demands. Lithium-ion (Li-ion) batteries are widely adopted due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage. Lithium-ion batteries are typically modeled using porous electrode theory coupled with various transport and reaction mechanisms, along with suitable discretization or approximations for the solid-phase diffusion equation.The solid-phase diffusion equation represents the main computational burden for typical pseudo-2-dimensional (p2D) models since these equations in the pseudo r-dimension must be solved at each point in the computational grid. This substantially increases the complexity of the model as well as the computational time. Traditional approaches towards simplifying solid-phase diffusion possess certain significant limitations, especially in modeling emerging electrode materials which involve phase changes and variable diffusivities. A computationally efficient representation for solid-phase diffusion was shown in a previous paper1 based on symmetric polynomials using Orthogonal Collocation and Galerkin formulation (weak form). This approach increases the accuracy of the approximation (p form in finite element methods) to enable efficient simulation with a minimal number of semi-discretized equations, ensuring mass conservation even for non-linear diffusion problems involving variable diffusivities. These methods will be reviewed for the full p2D model, illustrating their advantages in simulating high C-rates and short-time dynamic operation and extended to newer systems containing phase field models to analyze the robustness of the approximations. References R.S. Thiagarajan, A. Subramaniam, S. Kolluri, T. R. Garrick, Y. Preger, 729 V. De Angelis, J.-h. Lim, V. R. Subramanian et al2023 J. Electrochem. Soc. 170 010528
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (1) , 67
Efficient Reformulation of Lithium-Ion Battery Models Using Symmetric Polynomials: Extending to Phase Field Models
Energy storage will play a crucial role in the transition to clean and renewable sources of energy production to meet future consumption demands. Lithium-ion (Li-ion) batteries are widely adopted due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage. Lithium-ion batteries are typically modeled using porous electrode theory coupled with various transport and reaction mechanisms, along with suitable discretization or approximations for the solid-phase diffusion equation.The solid-phase diffusion equation represents the main computational burden for typical pseudo-2-dimensional (p2D) models since these equations in the pseudo r-dimension must be solved at each point in the computational grid. This substantially increases the complexity of the model as well as the computational time. Traditional approaches towards simplifying solid-phase diffusion possess certain significant limitations, especially in modeling emerging electrode materials which involve phase changes and variable diffusivities. A computationally efficient representation for solid-phase diffusion was shown in a previous paper1 based on symmetric polynomials using Orthogonal Collocation and Galerkin formulation (weak form). This approach increases the accuracy of the approximation (p form in finite element methods) to enable efficient simulation with a minimal number of semi-discretized equations, ensuring mass conservation even for non-linear diffusion problems involving variable diffusivities. These methods will be reviewed for the full p2D model, illustrating their advantages in simulating high C-rates and short-time dynamic operation and extended to newer systems containing phase field models to analyze the robustness of the approximations. References R.S. Thiagarajan, A. Subramaniam, S. Kolluri, T. R. Garrick, Y. Preger, 729 V. De Angelis, J.-h. Lim, V. R. Subramanian et al2023 J. Electrochem. Soc. 170 010528
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (1) , 71
Moving Next-Generation Phase-Field Models to BMS Applications - a Case Study That Confirms Professor Uzi Landau's Foresight
Physics-based electrochemical models play an important role in the model-based analysis, virtual engineering, estimation, control, and Battery Management Systems (BMS) of lithium-ion batteries.1 The diffusion process within the cell electrodes has typically been modeled using Fick's laws of diffusion.2 Recently, the intercalation of lithium ions in the electrode particle was posed as a phase change problem, where the area intercalated with lithium undergoes a phase change compared to the pristine material. Researchers have approached this phase change problem in terms of evolving core-shell problems3,4 and, more recently, using phase field models5,6 that may hold certain advantages over the traditional Fickian diffusion models. In this paper, we briefly discuss the relevance and rich physics of phase-field models and show how proper numerical analysis and schemes can help with implementing these models in BMS applications. Further, an investigation of phase-field model-based optimization framework predicts an impulse-like control profile and was designed to reduce capacity degradation. This work was partially inspired by the pulse-charging protocol proposed by Professor Landau in his 2006 work7. An open-source framework is developed and will be shared for predicting the (im)pulse protocol reported in this. References: Ramadesigan, V. et al. Modeling and simulation of lithium-ion batteries from a systems engineering perspective. J Electrochem Soc 159, R31–R45 (2012). Doyle, M., Fuller, T. F. & Newman, J. Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell. J Electrochem Soc 140, 1526–1533 (1993). Srinivasan, V. & Newman, J. Discharge Model for the Lithium Iron-Phosphate Electrode. J Electrochem Soc 151, A1517 (2004). Dargaville, S. & Farrell, T. W. Predicting Active Material Utilization in LiFePO Electrodes Using a Multiscale Mathematical Model. J Electrochem Soc 157, A830 (2010). Zeng, Y. & Bazant, M. Z. Phase Separation Dynamics in Isotropic Ion-Intercalation Particles. SIAM J Appl Math 74, 980–1004 (2014). Singh, G. K., Ceder, G. & Bazant, M. Z. Intercalation dynamics in rechargeable battery materials: General theory and phase-transformation waves in LiFePO4. Electrochim Acta 53, 7599–7613 (2008). Purushothaman, B. K. & Landau, U. Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents. J Electrochem Soc 153, A533 (2006). Figure 1
- 22 November 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-02 (1) , 71
Moving Next-Generation Phase-Field Models to BMS Applications - a Case Study That Confirms Professor Uzi Landau's Foresight
Physics-based electrochemical models play an important role in the model-based analysis, virtual engineering, estimation, control, and Battery Management Systems (BMS) of lithium-ion batteries.1 The diffusion process within the cell electrodes has typically been modeled using Fick's laws of diffusion.2 Recently, the intercalation of lithium ions in the electrode particle was posed as a phase change problem, where the area intercalated with lithium undergoes a phase change compared to the pristine material. Researchers have approached this phase change problem in terms of evolving core-shell problems3,4 and, more recently, using phase field models5,6 that may hold certain advantages over the traditional Fickian diffusion models. In this paper, we briefly discuss the relevance and rich physics of phase-field models and show how proper numerical analysis and schemes can help with implementing these models in BMS applications. Further, an investigation of phase-field model-based optimization framework predicts an impulse-like control profile and was designed to reduce capacity degradation. This work was partially inspired by the pulse-charging protocol proposed by Professor Landau in his 2006 work7. An open-source framework is developed and will be shared for predicting the (im)pulse protocol reported in this. References: Ramadesigan, V. et al. Modeling and simulation of lithium-ion batteries from a systems engineering perspective. J Electrochem Soc 159, R31–R45 (2012). Doyle, M., Fuller, T. F. & Newman, J. Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell. J Electrochem Soc 140, 1526–1533 (1993). Srinivasan, V. & Newman, J. Discharge Model for the Lithium Iron-Phosphate Electrode. J Electrochem Soc 151, A1517 (2004). Dargaville, S. & Farrell, T. W. Predicting Active Material Utilization in LiFePO Electrodes Using a Multiscale Mathematical Model. J Electrochem Soc 157, A830 (2010). Zeng, Y. & Bazant, M. Z. Phase Separation Dynamics in Isotropic Ion-Intercalation Particles. SIAM J Appl Math 74, 980–1004 (2014). Singh, G. K., Ceder, G. & Bazant, M. Z. Intercalation dynamics in rechargeable battery materials: General theory and phase-transformation waves in LiFePO4. Electrochim Acta 53, 7599–7613 (2008). Purushothaman, B. K. & Landau, U. Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents. J Electrochem Soc 153, A533 (2006). Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (2) , 516
Initial Value and Initial Current Discrepancy in Simulating Lithium-Ion Battery Packs - Resolution from Dr. Ralph White’s Analytical Approach
Battery models are useful tools that provide insight into electrochemical processes within an electrochemical device those can typically not be measured, either due to a lack of experimental methods or due to the transient nature of the phenomena in question. Irrespective of the complexity of the models involved, a general view is that a good model, once established for a single cell in terms of complexity of the physics, choice of simulation algorithm, value for the parameters, and mechanisms for fade, can be easily extended for pack simulations.1–3 This type of extension is critical to the virtual engineering efforts currently underway at OEMs which rely on accurate and representative battery models. In this work, pitfalls during scaling up approximate and detailed physics-based models developed for single-cell to pack-level simulations are highlighted using representative examples. Interesting mathematical nuances were found depending on the numerical simulation approach used. A discrepancy at initial times (t = 0) during the pack-level simulations was highlighted and resolved using the Laplace transform approach to get an analytical solution for the simplest model. A few thoughts on numerical challenges and the index of differential-algebraic equations (DAEs)4,5 while using the strong form and the weak form formulation of DAEs are also provided in the paper.6 References: M. Dubarry, N. Vuillaume, and B. Y. Liaw, J. Power Sources, 186, 500–507 (2009). T. Tranter et al., J. Open Source Softw., 7, 4051 (2022). J. M. Reniers and D. A. Howey, Appl. Energy, 336, 120774 (2023) https://doi.org/10.1016/j.apenergy.2023.120774. E. Hairer and G. Wanner, Solving Ordinary Differential Equations II, 2nd ed., p. 15–37, Springer Berlin, Heidelberg, Berlin, (1996). L. Petzold, SIAM J. Sci. Stat. Comput., 3, 367–384 (1982). T. K. Telmasre et al., J. Electrochem. Soc., 170, 103512 (2023). Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (2) , 516
Initial Value and Initial Current Discrepancy in Simulating Lithium-Ion Battery Packs - Resolution from Dr. Ralph White’s Analytical Approach
Battery models are useful tools that provide insight into electrochemical processes within an electrochemical device those can typically not be measured, either due to a lack of experimental methods or due to the transient nature of the phenomena in question. Irrespective of the complexity of the models involved, a general view is that a good model, once established for a single cell in terms of complexity of the physics, choice of simulation algorithm, value for the parameters, and mechanisms for fade, can be easily extended for pack simulations.1–3 This type of extension is critical to the virtual engineering efforts currently underway at OEMs which rely on accurate and representative battery models. In this work, pitfalls during scaling up approximate and detailed physics-based models developed for single-cell to pack-level simulations are highlighted using representative examples. Interesting mathematical nuances were found depending on the numerical simulation approach used. A discrepancy at initial times (t = 0) during the pack-level simulations was highlighted and resolved using the Laplace transform approach to get an analytical solution for the simplest model. A few thoughts on numerical challenges and the index of differential-algebraic equations (DAEs)4,5 while using the strong form and the weak form formulation of DAEs are also provided in the paper.6 References: M. Dubarry, N. Vuillaume, and B. Y. Liaw, J. Power Sources, 186, 500–507 (2009). T. Tranter et al., J. Open Source Softw., 7, 4051 (2022). J. M. Reniers and D. A. Howey, Appl. Energy, 336, 120774 (2023) https://doi.org/10.1016/j.apenergy.2023.120774. E. Hairer and G. Wanner, Solving Ordinary Differential Equations II, 2nd ed., p. 15–37, Springer Berlin, Heidelberg, Berlin, (1996). L. Petzold, SIAM J. Sci. Stat. Comput., 3, 367–384 (1982). T. K. Telmasre et al., J. Electrochem. Soc., 170, 103512 (2023). Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (2) , 248
A Thermal Tanks-in-Series Model for Simulating over-Discharge Cycling in Lithium-Ion Batteries
Energy storage will play a crucial role in the transition to clean and renewable sources of energy production to meet future consumption demands.1 Lithium-ion (Li-ion) batteries are widely adopted due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage.2 Li-ion batteries for high voltage operations, where several cells are connected in series, can experience inadvertent over-discharge due to differences between cells3,4. These differences can arise due to many reasons including changes in internal resistance and deviation in electrochemical degradation that can cause divergence of cell open circuit potentials. Over-discharge is a condition when the manufacturer recommended lower voltage limit is crossed while discharging4, which results in various side effects such as electrolyte decomposition, capacity degradation, cathode morphology change and possible internal short circuit3,5. Increase in anode potential during over-discharge leads to copper dissolution from the anode current collector and subsequent plating within cell components. The Solid Electrolyte Interface (SEI) can decompose during excessive deintercalation and reform during charging, reducing the lithium inventory. Excessive heat generation during cycle life testing after occurrences of over-discharges has been found in some cases to lead to temperatures >150 °C6,7. Temperature plays a key role in the electrochemical performance of individual cells, affecting the diffusivities of ions, kinetics of reactions and rate of degradation of the battery. A physics-based modeling approach coupled with a thermal model can be employed to understand the effect of over-discharge on the electrochemical behavior of Li-ion batteries and provides insights into the interplay of various degradation mechanisms that cause capacity fade. The Thermal Tank-In-Series9,10(TTiS) model is a systematically volume-averaged form of the standard pseudo-2-dimensional (p2D)11 model with energy balance equations for the current collectors, cathode, separator and anode. This reduces the number of equations in the model and improves computational speed while maintaining accuracy, as it is sensitive to changes in the battery’s state of charge (SOC) and cell temperature, which helps predict the overpotential changes to the cell electrodes and thermodynamics. We use the TTiS model to identify the dominant fade mechanisms in 3 sets of experimental cycling and temperature data for the: i) normal operating window (2.5V – 4.2V), ii) 5 initial cycles of over-discharge (1.5V – 4.2V) followed by normal operation until 20% capacity fade and iii) 5 cycles of periodic over-discharge every 20 cycles, until 20% capacity fade. Analysis on the effect of C-rate, ambient temperature and voltage window of operation will facilitate understanding the temperature behavior and overpotentials in a cell sandwich. Key considerations required in extending a model to simulate over-discharge will also be examined. References S.P. S. Badwal, S. S. Giddey, C. Munnings, A. I. Bhatt, and A. F. Hollenkamp, Frontiers in Chemistry, 2, 28 (2014). G. Pistoia. Lithium-Ion Batteries: Advances and Applications. First ed. Elsevier, Amsterdam (2014). R. Guo, L. Lu., M. Ouyang, X. Feng. Sci Rep 6, 30248 (2016). G.Zhang, X. Wei, S. Chen, J. Zhu, G. Han, and H. Dai. J. Power Sources, 521, 230990. (2022). C. Fear, D. Juarez-Robles, J. A. Jeevarajan, and P. P. Mukherjee, J. Electrochem. Soc., 165, A1639–A1647 (2018). D. Juarez-Robles, Purdue Univ. Ph.D. Thesis (2019). H. Maleki and J. N. Howard, J. Power Sources, 160, 1395–1402 (2006). H. Liu, Z. Wei, W. He, and J. Zhao, Energy Convers. Manag., 150, 304–330 (2017). A. Subramaniam, S. Kolluri, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc., 167, 113506 (2020). A. Subramaniam, S. Kolluri, C. D. Parke, M. Pathak, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc., 167, 013534 (2020). M. Doyle, T. F. Fuller, and J. Newman, J. Electrochem. Soc., 140, 1526 (1993)
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (2) , 248
A Thermal Tanks-in-Series Model for Simulating over-Discharge Cycling in Lithium-Ion Batteries
Energy storage will play a crucial role in the transition to clean and renewable sources of energy production to meet future consumption demands.1 Lithium-ion (Li-ion) batteries are widely adopted due to their high energy density, low self-discharge rate and fast charging capabilities for applications like electric vehicles and grid storage.2 Li-ion batteries for high voltage operations, where several cells are connected in series, can experience inadvertent over-discharge due to differences between cells3,4. These differences can arise due to many reasons including changes in internal resistance and deviation in electrochemical degradation that can cause divergence of cell open circuit potentials. Over-discharge is a condition when the manufacturer recommended lower voltage limit is crossed while discharging4, which results in various side effects such as electrolyte decomposition, capacity degradation, cathode morphology change and possible internal short circuit3,5. Increase in anode potential during over-discharge leads to copper dissolution from the anode current collector and subsequent plating within cell components. The Solid Electrolyte Interface (SEI) can decompose during excessive deintercalation and reform during charging, reducing the lithium inventory. Excessive heat generation during cycle life testing after occurrences of over-discharges has been found in some cases to lead to temperatures >150 °C6,7. Temperature plays a key role in the electrochemical performance of individual cells, affecting the diffusivities of ions, kinetics of reactions and rate of degradation of the battery. A physics-based modeling approach coupled with a thermal model can be employed to understand the effect of over-discharge on the electrochemical behavior of Li-ion batteries and provides insights into the interplay of various degradation mechanisms that cause capacity fade. The Thermal Tank-In-Series9,10(TTiS) model is a systematically volume-averaged form of the standard pseudo-2-dimensional (p2D)11 model with energy balance equations for the current collectors, cathode, separator and anode. This reduces the number of equations in the model and improves computational speed while maintaining accuracy, as it is sensitive to changes in the battery’s state of charge (SOC) and cell temperature, which helps predict the overpotential changes to the cell electrodes and thermodynamics. We use the TTiS model to identify the dominant fade mechanisms in 3 sets of experimental cycling and temperature data for the: i) normal operating window (2.5V – 4.2V), ii) 5 initial cycles of over-discharge (1.5V – 4.2V) followed by normal operation until 20% capacity fade and iii) 5 cycles of periodic over-discharge every 20 cycles, until 20% capacity fade. Analysis on the effect of C-rate, ambient temperature and voltage window of operation will facilitate understanding the temperature behavior and overpotentials in a cell sandwich. Key considerations required in extending a model to simulate over-discharge will also be examined. References S.P. S. Badwal, S. S. Giddey, C. Munnings, A. I. Bhatt, and A. F. Hollenkamp, Frontiers in Chemistry, 2, 28 (2014). G. Pistoia. Lithium-Ion Batteries: Advances and Applications. First ed. Elsevier, Amsterdam (2014). R. Guo, L. Lu., M. Ouyang, X. Feng. Sci Rep 6, 30248 (2016). G.Zhang, X. Wei, S. Chen, J. Zhu, G. Han, and H. Dai. J. Power Sources, 521, 230990. (2022). C. Fear, D. Juarez-Robles, J. A. Jeevarajan, and P. P. Mukherjee, J. Electrochem. Soc., 165, A1639–A1647 (2018). D. Juarez-Robles, Purdue Univ. Ph.D. Thesis (2019). H. Maleki and J. N. Howard, J. Power Sources, 160, 1395–1402 (2006). H. Liu, Z. Wei, W. He, and J. Zhao, Energy Convers. Manag., 150, 304–330 (2017). A. Subramaniam, S. Kolluri, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc., 167, 113506 (2020). A. Subramaniam, S. Kolluri, C. D. Parke, M. Pathak, S. Santhanagopalan, and V. R. Subramanian, J. Electrochem. Soc., 167, 013534 (2020). M. Doyle, T. F. Fuller, and J. Newman, J. Electrochem. Soc., 140, 1526 (1993)
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (38) , 2282
Modeling Water Transport in Polymer Electrolyte Membrane Electrolyzers Using a One-Dimensional Transport Model
In this work, we present a water transport model to quantify the movement of water across Nafion® membranes in a proton exchange membrane electrolyzer as a function of varying operating conditions and membrane parameters. This physics-based model is based on the three main water transport mechanisms: diffusion, electro-osmotic drag, and pressure-driven flow. Three sets of equations are obtained to model the movement of water on the cathode side – I. Material balances for hydrogen and water in the flow channel (z-direction), II. Water movement across the membrane in the x-direction, and III. Expressions for variable membrane properties to serve as model inputs. The condensation of water at the cathode is also modeled to understand the respective transport contributions from the vapor and liquid phases. The coupled equation sets are solved numerically with appropriate boundary conditions. An analytical solution is also obtained for the governing differential equation for the mole fraction of water in the vapor phase. This study is perhaps the first effort for a detailed physics-based transport model to predict the water transport in the electrolyzer in one dimension using the actual measured values for the physical parameters of the system. The model results are compared with the experimental data available for water transport, and a good agreement is observed over the wide range of current, temperature and pressure differentials. Further, with the help of this simple transport model, the numerical analysis is performed to delineate the effect of electrolyzer operating conditions on the net water transport across the membrane, water condensation at the cathode, individual contribution of the transport fluxes, and electrolyzer design. Finally, the model is exercised to simulate the dependence of water transport as a function of membrane thickness. This confirms the validity of the current approach of using thin reinforced membranes by electrolyzer fabricators. Figure 1
- 9 August 2024
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2024-01 (38) , 2282
Modeling Water Transport in Polymer Electrolyte Membrane Electrolyzers Using a One-Dimensional Transport Model
In this work, we present a water transport model to quantify the movement of water across Nafion® membranes in a proton exchange membrane electrolyzer as a function of varying operating conditions and membrane parameters. This physics-based model is based on the three main water transport mechanisms: diffusion, electro-osmotic drag, and pressure-driven flow. Three sets of equations are obtained to model the movement of water on the cathode side – I. Material balances for hydrogen and water in the flow channel (z-direction), II. Water movement across the membrane in the x-direction, and III. Expressions for variable membrane properties to serve as model inputs. The condensation of water at the cathode is also modeled to understand the respective transport contributions from the vapor and liquid phases. The coupled equation sets are solved numerically with appropriate boundary conditions. An analytical solution is also obtained for the governing differential equation for the mole fraction of water in the vapor phase. This study is perhaps the first effort for a detailed physics-based transport model to predict the water transport in the electrolyzer in one dimension using the actual measured values for the physical parameters of the system. The model results are compared with the experimental data available for water transport, and a good agreement is observed over the wide range of current, temperature and pressure differentials. Further, with the help of this simple transport model, the numerical analysis is performed to delineate the effect of electrolyzer operating conditions on the net water transport across the membrane, water condensation at the cathode, individual contribution of the transport fluxes, and electrolyzer design. Finally, the model is exercised to simulate the dependence of water transport as a function of membrane thickness. This confirms the validity of the current approach of using thin reinforced membranes by electrolyzer fabricators. Figure 1