STSongyao Tang

Songyao Tang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Songyao Tang has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Influence of Metal–Organic Chemical Vapor Deposition MoS2 Material Properties on Memristor Resistance State and Switching Voltage Variability

    by Dennis Braun, Jing Liu, Poonam Devi, Vasilis A. Maroufidis, Hui Bian, Lukas Völkel, Hleb Fiadziushkin, Jimin Lee, Sofía Cruces, Songyao Tang, et al.

    Two-dimensional (2D) materials are promising resistive switching materials for vertical memristors due to their ultimate thinness and low-power operation. However, high electrical variability remains a challenge, and reducing it through materials engineering remains largely unexplored. Here, we investigate how the properties of 2D multilayer molybdenum disulfide (MoS2), grown by metal–organic chemical vapor deposition (MOCVD), influence variability in memristors with metal electrodes. Two MoS2 batches were prepared under different MOCVD growth conditions, resulting in distinct surface roughness and grain sizes. Devices based on smoother, more uniform MoS2 with larger grains exhibited significantly reduced electrical variability. Based on established grain-boundary-assisted filament models, the larger crystallites provide a plausible explanation for the reduced variability, although the contributions of individual material properties cannot be separated in the present comparison. More than 60 devices per batch were tested, providing a robust statistical basis. These results show that optimizing MoS2 grain size and uniformity can improve memristor reliability and highlight the potential of MOCVD as a scalable route toward improved statistical uniformity in MoS2 films.

  • Open Access

    Direct MOCVD of WS2 monolayers on SiO2/Si substrates for transfer-free FET fabrication

    by Yingfang Ding, Ran Yao, Tobias Deußen, Songyao Tang, Yibing Wang, Michael Heuken, Holger Kalisch, Andrei Vescan


  • Open Access

    Real‐Time Monitoring of 2D TMDC MOCVD: An In Situ Spectroscopic Reflectance Approach

    by Songyao Tang, Yibing Wang, Hleb Fiadziushkin, Yingfang Ding, Amir Ghiami, Michael Heuken, Andrei Vescan, Holger Kalisch

    Metal–organic chemical vapor deposition (MOCVD) has become a well‐established technique to grow 2D transition metal dichalcogenide (TMDC) materials on large scale with high reproducibility. Despite a steady progress in understanding the microscopic growth mechanisms, the lack of a dedicated in situ monitoring technique complicates the development and optimization of MOCVD processes for 2D TMDC materials, especially regarding a robust layer number control. In this work, a novel and industrially applicable approach is presented based on in situ spectroscopic reflectance measurements that can provide valuable real‐time insights into MOCVD processes. By analyzing the dynamics of reflectance spectra (350–810 nm) during deposition processes, the lateral growth and coalescence of (WSe 2 , MoS 2 , and WS 2 ) monolayers can be clearly identified from dynamic differential reflectance colormaps. Characteristic spectroscopic features of distinct TMDC thin films (especially WSe 2 ) of various thicknesses at different temperatures are analyzed and reported in detail, which can serve as an empirical reference to flexibly control and terminate growth at a certain targeted thickness. The proposed method can be potentially engineered into a real‐time data acquisition and processing tool, which can significantly contribute to the industrial fabrication of 2D TMDC thin films and heterostructures.


  • Open Access

    Water-assisted multistep MOCVD for wafer-scale layer-by-layer growth of WSe2

    by Yibing Wang, Songyao Tang, Zhaodong Wang, Yingfang Ding, Hleb Fiadziushkin, Amir Ghiami, Susanne Hoffmann-Eifert, Michael Heuken, Andrei Vescan, Holger Kalisch

    Thin films and heterostructures of two-dimensional transition-metal dichalcogenides (TMDCs) are attractive due to their unique physical properties. However, during metal–organic chemical vapor deposition (MOCVD), the formation of parasitic bilayers (BLs) before monolayer (ML) coalescence is challenging. In this study, a novel multistep MOCVD process, including the additive H 2 O is developed. The aim is to minimize parasitic BL nucleation on WSe 2 ML domains and to grow coalesced uniform ML samples on sapphire substrates. Even after optimization, without additives, BL coverage is approximately 15 percent. We show that introducing H 2 O reduces this value to about 2 percent. H 2 O is equally effective to restrain parasitic (i.e., premature) nucleation in multilayer WSe 2 . Raman, photoluminescence, and x-ray photoelectron spectroscopy measurements neither show oxide species due to H 2 O introduction nor any compromise to the structural or optical properties. Our results provide a solid step toward the direct MOCVD of high-quality TMDC multilayers and heterostructures. Impact statement: Uniform transition-metal dichalcogenide (TMDC) films of controlled thickness (i.e., layer number), and their heterostructures, potentially integrated with other two-dimensional (2D) or three-dimensional/bulk materials, promise significant progress in a wide range of applications covering beyond-CMOS electronics, optoelectronics and even neuromorphic components for next-generation artificial intelligence systems. However, for their commercialization, an industrially mature deposition technology with proven scalability, homogeneity and reproducibility is a major prerequisite. In compound semiconductor technology, metal–organic chemical vapor deposition (MOCVD) is the leading technique satisfying all of these requirements. MOCVD is also well suited to grow TMDC films of high quality, but still, quite little is known about the underlying microscopic processes of film formation. Especially, limited migration lengths of metal adatoms cause premature secondary nucleation which manifests in, for example, parasitic bilayer formation on monolayer domains and nonplanarity in 2D-2D heterostructures. In theory, microscopic processes between initial precursor decomposition and final film formation can be tuned by additives to mitigate this problem. However, just a few publications exist, and to the authors’ knowledge, none about the introduction of H 2 O to TMDC MOCVD processes. In this study, the effects of H 2 O addition to a previously optimized WSe 2 growth process are studied, and its impact on migration length are elaborated. Graphical


  • Improved Reliability of 2D-TMDC Dry Transfer via PMMA and Target Substrate Treatments

    by Amir Ghiami, Hleb Fiadziushkin, Tianyishan Sun, Songyao Tang, Yibing Wang, Eva Mayer, Jochen M. Schneider, Agata Piacentini, Max C. Lemme, Michael Heuken, et al.


  • Open Access

    Optimization of Layer Transfer and Photolithography for Device Integration of 2D-TMDC

    by Amir Ghiami, Tianyishan Sun, Hleb Fiadziushkin, Songyao Tang, Annika Grundmann, Michael Heuken, Holger Kalisch, Andrei Vescan

    Extensive research into two-dimensional transition metal dichalcogenides (2D-TMDCs) over the past decade has paved the way for the development of (opto)electronic devices with enhanced performance and novel capabilities. To realize devices based on 2D-TMDC layers, compatible and optimized technologies such as layer transfer and photolithography are required. Challenges arise due to the ultrathin, surface-only nature of 2D layers with weak van der Waals adhesion to their substrate. This might potentially compromise their integrity during transfer and photolithography processes, in which prolonged exposure at usually high temperature to reactive chemicals and strong solvents are conventionally used. In this paper, we show that employing a dry-transfer technique based on thermal release tape (TRT) as an alternative to wet processes based on KOH solution better preserves layer quality. In the succeeding device fabrication process, an optimized photolithography as a cost-effective and widely available method for device patterning is utilized. The introduced photolithography protocol presents a near-perfect yield and reproducibility. To validate our optimized techniques, we fabricated field-effect transistors (FETs) using 2D-MoS2 layers from metal–organic chemical vapor deposition (MOCVD), wet- and dry-transferred onto SiO2/Si substrates. Our findings mark a significant stride towards the efficient and industry-compatible utilization of 2D van der Waals materials in device fabrication.


  • Open Access

    Impact of Carbon Impurities on Air Stability of MOCVD 2D-MoS2

    by Amir Ghiami, Annika Grundmann, Songyao Tang, Hleb Fiadziushkin, Zhaodong Wang, Stephan Aussen, Susanne Hoffmann-Eifert, Michael Heuken, Holger Kalisch, Andrei Vescan

    Metal–organic chemical vapor deposition (MOCVD) is a key method for scalable synthesis of two-dimensional transition metal dichalcogenide (2D-TMDC) layers. However, it faces several challenges, such as the unintentional co-deposition of carbon impurities resulting from the pyrolysis of metal–organic precursors. This study investigates the chemical features of carbon and its impact on the photoluminescence property and air stability of 2D-MoS2. Using X-ray photoemission spectroscopy (XPS), it was found that the carbon impurities show characteristics similar to those of sp2-bonded graphitic carbon. Upon prolonged (20–40 weeks) exposure to the atmosphere, the incorporated carbon appears to react with 2D-MoS2, forming a MoS2−xCx solid solution. At the same time, a gradual decrease in the S/Mo ratio implies the formation of sulfur vacancies was also observed. These two processes lead to crystal degradation over time, as evidenced by the gradual quenching of the Raman and photoluminescence (PL) peaks. More detailed PL analyses suggest a charge transfer mechanism between sp2-carbon/2D-MoS2 and 2D-MoS2/air-adsorbates, which, in the short term, could alter PL emissions and appear to further intensify the degradation of 2D-MoS2 in the long-term. The findings highlight the strong impact of unintentionally co-deposited carbon on the optical properties and air stability of MOCVD 2D-MoS2 layers.


  • Open Access

    Nucleation and coalescence of tungsten disulfide layers grown by metalorganic chemical vapor deposition

    by Haonan Tang, Sergej Pasko, Simonas Krotkus, Thorsten Anders, Cornelia Wockel, Jan Mischke, Xiaochen Wang, Ben Conran, Clifford McAleese, Ken Teo, et al.


  • Open Access

    Migration-Enhanced Metal–Organic Chemical Vapor Deposition of Wafer-Scale Fully Coalesced WS2 and WSe2 Monolayers

    by Songyao Tang, Annika Grundmann, Hleb Fiadziushkin, Zhaodong Wang, Susanne Hoffmann-Eifert, Amir Ghiami, Arne Debald, Michael Heuken, Andrei Vescan, Holger Kalisch


  • Open Access

    Detailed study on MOCVD of wafer-scale MoS2 monolayers: From nucleation to coalescence

    by Songyao Tang, Annika Grundmann, Hleb Fiadziushkin, Amir Ghiami, Michael Heuken, Andrei Vescan, Holger Kalisch

    Metal–organic chemical vapour deposition (MOCVD) has become one of the most promising techniques for the large-scale fabrication of 2D transition metal dichalcogenide (TMDC) materials. Despite efforts devoted to the development of MOCVD for TMDC monolayers, the whole picture of the growth process has not been fully unveiled yet. In this work, we employ a commercial AIXTRON CCS MOCVD tool for the deposition of MoS2 on sapphire using standard precursors and H2 as carrier gas. Adsorption and diffusion of Mo adatoms on the substrate are found to be decisive for nucleation. By lowering temperature from 650 to 450 °C, a uniform distribution of nuclei on sapphire terraces is achieved. Full coalescence of MoS2 monolayers with limited bilayer formation (~ 15%) is then realized at 700 °C. This study highlights the importance of understanding the details of film formation mechanisms and developing multi-stage MOCVD processes for 2D TMDC films. Graphical abstract