Hongyang Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hongyang Zhao has a total of 208 co-authors. Here are the top co-authors by number of shared publications:
Qiuming Fu
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology 1 , 206 Guanggu 1st Road, Wuhan 430205
15 shared publicationsHong Tao
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430205, P. R. China
13 shared publicationsZhibin Ma
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials, Wuhan Institute of Technology, Wuhan, China
8 shared publications- Zhenxiang Cheng
University of Wollongong
6 shared publications - Jianxu Ding
College of Energy Storage Technology, Shandong University of Science and Technology, Qingdao 266590, China
5 shared publications Jun Weng
Hubei Key Laboratory of Plasma Chemistry and Advanced Materials Wuhan Institute of Technology No. 206 Guanggu 1st Road Wuhan 430205 China
5 shared publications
Latest Publications
- 3 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (65) , 45062-45073
Enhancing the high-temperature dielectric energy storage performance of polypropylene films through modification with organic urethane-type molecules
The HDI-OD created the deep traps and optimized crystallinity in PP film, achieving dielectric energy storage performance at 25 °C and 120 °C.
- 3 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (65) , 45062-45073
Enhancing the high-temperature dielectric energy storage performance of polypropylene films through modification with organic urethane-type molecules
The HDI-OD created the deep traps and optimized crystallinity in PP film, achieving dielectric energy storage performance at 25 °C and 120 °C.
- 5 October 2026
- Published by Elsevier in Applied Surface Science
- Vol. 755
An applicable mechanism for regulating anti-etching performance through interface doping in periodic Y2O3-BaZrO3 films
- 5 October 2026
- Published by Elsevier in Applied Surface Science
- Vol. 755
An applicable mechanism for regulating anti-etching performance through interface doping in periodic Y2O3-BaZrO3 films
- 17 September 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 103 (10) , 5956-5962
An Undergraduate Laboratory Experiment for the Fabrication of ZIF-8 SURMOF Thin Films via Layer-by-Layer Self-Assembly
Surface-mounted metal-organic framework (SURMOF) thin-films are receiving growing interest due to their unique structural characteristics and potential applications in advanced nanotechnology. A laboratory teaching experiment based on layer-by-layer (LBL) self-assembly method was developed for the fabrication of zeolitic imidazolate frameworks-8 (ZIF-8) SURMOF thin-films. The experiment integrates concepts from coordination chemistry, crystallography, materials science, and modern characterization techniques, providing students with an interdisciplinary learning experience. Through the automated LBL deposition process, students gain hands-on experience in the coordination-driven growth of SURMOF thin-films and learn the fundamental principles of SURMOF fabrication. Compared with conventional MOF synthesis experiments, this course provides a more intuitive understanding of interfacial coordination assembly and modern thin-film fabrication techniques. In addition, the teaching design emphasizes student-centered learning, scientific discussion, and literature-based problem analysis to enhance students’ critical thinking and research abilities. Assessment results demonstrated that the experiment effectively improved students’ understanding of MOF materials, characterization techniques, and thin-film growth mechanisms while simultaneously strengthening their interdisciplinary scientific reasoning and experimental skills.
- 17 September 2026
- Published by American Chemical Society (ACS) in Journal of Chemical Education
- Vol. 103 (10) , 5956-5962
An Undergraduate Laboratory Experiment for the Fabrication of ZIF-8 SURMOF Thin Films via Layer-by-Layer Self-Assembly
Surface-mounted metal-organic framework (SURMOF) thin-films are receiving growing interest due to their unique structural characteristics and potential applications in advanced nanotechnology. A laboratory teaching experiment based on layer-by-layer (LBL) self-assembly method was developed for the fabrication of zeolitic imidazolate frameworks-8 (ZIF-8) SURMOF thin-films. The experiment integrates concepts from coordination chemistry, crystallography, materials science, and modern characterization techniques, providing students with an interdisciplinary learning experience. Through the automated LBL deposition process, students gain hands-on experience in the coordination-driven growth of SURMOF thin-films and learn the fundamental principles of SURMOF fabrication. Compared with conventional MOF synthesis experiments, this course provides a more intuitive understanding of interfacial coordination assembly and modern thin-film fabrication techniques. In addition, the teaching design emphasizes student-centered learning, scientific discussion, and literature-based problem analysis to enhance students’ critical thinking and research abilities. Assessment results demonstrated that the experiment effectively improved students’ understanding of MOF materials, characterization techniques, and thin-film growth mechanisms while simultaneously strengthening their interdisciplinary scientific reasoning and experimental skills.
- Open Access
- 15 July 2026
- Published by MDPI AG in Nanoenergy Advances
- Vol. 6 (3) , 21
Enhanced Ferroelectric Performances in Optimized Sol–Gel Y-Doped HfO2 Thin Films
Y-doped HfO2 ferroelectric thin films were fabricated via the sol–gel chemical solution deposition method. The effects of Y doping concentration, film thickness, and annealing temperature on the structure, morphology, and electrical properties were systematically investigated. The results demonstrate that doping concentration, film thickness, and annealing temperature can significantly regulate the crystalline phase composition. Appropriate doping, moderate film thickness, and suitable annealing temperature effectively stabilize the ferroelectric orthorhombic phase and suppress the monoclinic phase. The optimized film is obtained under the conditions of 4 mol% Y doping, a film thickness of 59.2 nm, and rapid thermal annealing at 600 °C, which exhibits the best crystallinity, dense and flat surface, and moderate oxygen vacancy concentration. The optimized sample shows a remnant polarization of 86.9 μC/cm2, a coercive field of 1.1 MV/cm, and a leakage current density as low as 9.77 × 10−6 A/cm2, representing the best ferroelectric performance. This study provides a reliable process and experimental basis for the preparation of high-performance HfO2-based ferroelectric thin films by the sol–gel method.
- 15 July 2026
- Published by MDPI AG in Nanoenergy Advances
- Vol. 6 (3) , 21
Open AccessEnhanced Ferroelectric Performances in Optimized Sol–Gel Y-Doped HfO2 Thin Films
Y-doped HfO2 ferroelectric thin films were fabricated via the sol–gel chemical solution deposition method. The effects of Y doping concentration, film thickness, and annealing temperature on the structure, morphology, and electrical properties were systematically investigated. The results demonstrate that doping concentration, film thickness, and annealing temperature can significantly regulate the crystalline phase composition. Appropriate doping, moderate film thickness, and suitable annealing temperature effectively stabilize the ferroelectric orthorhombic phase and suppress the monoclinic phase. The optimized film is obtained under the conditions of 4 mol% Y doping, a film thickness of 59.2 nm, and rapid thermal annealing at 600 °C, which exhibits the best crystallinity, dense and flat surface, and moderate oxygen vacancy concentration. The optimized sample shows a remnant polarization of 86.9 μC/cm2, a coercive field of 1.1 MV/cm, and a leakage current density as low as 9.77 × 10−6 A/cm2, representing the best ferroelectric performance. This study provides a reliable process and experimental basis for the preparation of high-performance HfO2-based ferroelectric thin films by the sol–gel method.
- 22 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (16)
An anisotropic α-HgS single crystal with giant second-harmonic generation
The exploration of in-plane anisotropic properties is of great significance for fundamental studies and further development of polarization-sensitive optoelectronics. In this study, the synthesis of the chiral material α-HgS via a temperature-oscillation chemical vapor transport process is reported. The (001) plane orientation is well demonstrated by x-ray diffraction. Angle-resolved polarized Raman spectroscopy reveals that α-HgS exhibits strong in-plane anisotropic phonon vibrations. Furthermore, it is demonstrated that the second-harmonic generation (SHG) intensity of α-HgS is highly dependent on both excitation wavelengths and crystallographic orientation, especially with the giant SHG efficiency (134 times that of MoS2). These anisotropic properties make α-HgS an interesting platform for novel polarization-sensitive optoelectronic applications.
- 22 April 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (16)
An anisotropic α-HgS single crystal with giant second-harmonic generation
The exploration of in-plane anisotropic properties is of great significance for fundamental studies and further development of polarization-sensitive optoelectronics. In this study, the synthesis of the chiral material α-HgS via a temperature-oscillation chemical vapor transport process is reported. The (001) plane orientation is well demonstrated by x-ray diffraction. Angle-resolved polarized Raman spectroscopy reveals that α-HgS exhibits strong in-plane anisotropic phonon vibrations. Furthermore, it is demonstrated that the second-harmonic generation (SHG) intensity of α-HgS is highly dependent on both excitation wavelengths and crystallographic orientation, especially with the giant SHG efficiency (134 times that of MoS2). These anisotropic properties make α-HgS an interesting platform for novel polarization-sensitive optoelectronic applications.
- 20 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (16) , 30486-30494
Upconversion temperature sensing effect of Er3+/Yb3+ co-doped La2O3-Nb2O5-ZrO2-Ga2O3-BaO
- 20 April 2026
- Published by Elsevier in Ceramics International
- Vol. 52 (16) , 30486-30494
Upconversion temperature sensing effect of Er3+/Yb3+ co-doped La2O3-Nb2O5-ZrO2-Ga2O3-BaO
- 24 February 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 28 (13) , 2075-2082
N 2 plasma-assisted surface modification of g-C 3 N 4 nanosheets for enhanced photocatalytic H 2 O 2 production
Microwave plasma treatment using N 2 as the carrier gas introduces oxygen-containing functional groups and carbon vacancies into g-C 3 N 4 nanosheets, thereby significantly enhancing the photocatalytic activity for H 2 O 2 evolution.
- 24 February 2026
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 28 (13) , 2075-2082
N 2 plasma-assisted surface modification of g-C 3 N 4 nanosheets for enhanced photocatalytic H 2 O 2 production
Microwave plasma treatment using N 2 as the carrier gas introduces oxygen-containing functional groups and carbon vacancies into g-C 3 N 4 nanosheets, thereby significantly enhancing the photocatalytic activity for H 2 O 2 evolution.
- 25 December 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (6) , 2613-2657
Radioluminescent glass and fibers for neutron detection
Modern advances establish neutrons as vital scientific probes, enabling breakthroughs spanning high-energy physics, industrial manufacturing, materials innovation, heritage conservation, medical diagnostics, and geological prospecting.
- 25 December 2025
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (6) , 2613-2657
Radioluminescent glass and fibers for neutron detection
Modern advances establish neutrons as vital scientific probes, enabling breakthroughs spanning high-energy physics, industrial manufacturing, materials innovation, heritage conservation, medical diagnostics, and geological prospecting.