Vicente Escaño
Research Subjects
Research Interests
Vicente Escaño has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Sergio Fortes
University of Malaga
5 shared publications - Pablo Vera-Soto
University of Málaga, E.T.S. Ingeniería de Telecomunicación
4 shared publications - Raquel Barco
University of Malaga
4 shared publications - Javier Villegas
Telecommunication Research Institute (TELMA), E.T.S. Ingeniera de Telecomunicacin, Universidad de Mlaga, Mlaga, Spain
3 shared publications - Rafael Ortiz
Aerospace & Defence Systems, Aertec Solutions, Av. Juan López de Peñalver, 17, 29590 Malaga, Spain
3 shared publications - José Pulido
University of Málaga, E.T.S. Ingeniería de Telecomunicación
2 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62, 13828-13839
An Integrated Framework for Automated Validation and Verification of Avionics Networks
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 62, 13828-13839
Open AccessAn Integrated Framework for Automated Validation and Verification of Avionics Networks
- Open Access
Deployment of a Testbed for Validation of TSN Networks in Avionics
Time-Sensitive Networking (TSN) in avionics is being considered as a standard capable of providing more real-time and safety-critical capabilities than AFDX, the current standard in avionics communications. A TSN profile is therefore being developed for the aerospace domain by IEEE. Hence, this research outlines the deployment of a testbed aimed at validating TSN in avionics to ensure that this technology meets the stringent timing and latency requirements of avionics applications. To this end, a daisy chain or ring topology has been set up for the validation of the testbed, as this topology provides redundancy of paths without the need to add additional devices. This work presents latency and jitter measurements under different priority configurations and different channel saturation conditions, showing no packet loss and demonstrating the reliability of TSN for time-critical applications. A comparison with Avionics Full Duplex Ethernet (AFDX) simulations was also made, highlighting the weaknesses of AFDX. By providing a comprehensive platform for testing and validation, the testbed will contribute to the advancement of TSN technology in aerospace applications, ultimately improving the safety and efficiency of aircraft operations.
Open AccessDeployment of a Testbed for Validation of TSN Networks in Avionics
Time-Sensitive Networking (TSN) in avionics is being considered as a standard capable of providing more real-time and safety-critical capabilities than AFDX, the current standard in avionics communications. A TSN profile is therefore being developed for the aerospace domain by IEEE. Hence, this research outlines the deployment of a testbed aimed at validating TSN in avionics to ensure that this technology meets the stringent timing and latency requirements of avionics applications. To this end, a daisy chain or ring topology has been set up for the validation of the testbed, as this topology provides redundancy of paths without the need to add additional devices. This work presents latency and jitter measurements under different priority configurations and different channel saturation conditions, showing no packet loss and demonstrating the reliability of TSN for time-critical applications. A comparison with Avionics Full Duplex Ethernet (AFDX) simulations was also made, highlighting the weaknesses of AFDX. By providing a comprehensive platform for testing and validation, the testbed will contribute to the advancement of TSN technology in aerospace applications, ultimately improving the safety and efficiency of aircraft operations.
- Open Access
An Event-Driven Link-Level Simulator for the Validation of AFDX and Ethernet Avionics Networks
Aircraft are composed of many electronic systems: sensors, displays, navigation equipment, and communication elements. These elements require a reliable interconnection, which is a major challenge for communication networks since high reliability and predictability requirements must be verified for safe operation. In addition, their verification via hardware deployments is limited because these are costly and it is difficult to try different architectures and configurations, thus delaying design and development in this area. Therefore, verification at early stages in the design process is of great importance and must be supported with simulation. In this context, this work presents an event-driven link-level framework and simulator for the validation of avionics networks. The tool presented supports communication protocols commonly used in avionics, such as Avionics Full-Duplex Switched Ethernet (AFDX), as well as Ethernet, which is used with static routing. Also, the simulator provides accurate results by employing realistic models for various devices. The proposed platform was evaluated in the Clean Sky’s Disruptive Cockpit for Large Passenger Aircraft architecture scenario, showing the capabilities of the simulator. Verification speed is a key factor in its application, so the computational cost was analyzed, proving that the execution time is linearly dependent on the number of messages sent and that the increase in the number of nodes has few quadratic components.
Open AccessAn Event-Driven Link-Level Simulator for the Validation of AFDX and Ethernet Avionics Networks
Aircraft are composed of many electronic systems: sensors, displays, navigation equipment, and communication elements. These elements require a reliable interconnection, which is a major challenge for communication networks since high reliability and predictability requirements must be verified for safe operation. In addition, their verification via hardware deployments is limited because these are costly and it is difficult to try different architectures and configurations, thus delaying design and development in this area. Therefore, verification at early stages in the design process is of great importance and must be supported with simulation. In this context, this work presents an event-driven link-level framework and simulator for the validation of avionics networks. The tool presented supports communication protocols commonly used in avionics, such as Avionics Full-Duplex Switched Ethernet (AFDX), as well as Ethernet, which is used with static routing. Also, the simulator provides accurate results by employing realistic models for various devices. The proposed platform was evaluated in the Clean Sky’s Disruptive Cockpit for Large Passenger Aircraft architecture scenario, showing the capabilities of the simulator. Verification speed is a key factor in its application, so the computational cost was analyzed, proving that the execution time is linearly dependent on the number of messages sent and that the increase in the number of nodes has few quadratic components.
- Open Access
An event-driven link-level simulator for validation of AFDX and Ethernet avionics networks
Aircraft are composed of many electronic systems: sensors, displays, navigation equipment and communication elements. These elements require a reliable interconnection, which is a major challenge for communication networks as high reliability and predictability requirements must be verified for safe operation. In addition, their verification via hardware deployments is limited because these are costly and make difficult to try different architectures and configurations, thus delaying the design and development in this area. Therefore, verification at early stages in the design process is of great importance and must be supported by simulation. In this context, this work presents an event-driven link level framework and simulator for the validation of avionics networks. The presented tool supports communication protocols such as Avionics Full-Duplex Switched Ethernet (AFDX), which is a common protocol in avionics, as well as Ethernet, used with static routing. Alsa, accurate results are facilitated by the simulator through the utilization of realistic models for the different devices. The proposed platform is evaluated in Clean Sky's Disruptive Cockpit for Large Passenger Aircraft architecture scenario showing capabilities of the simulator. The speed of the verification is a key factor in its application, so the computational cost is analysed, proving that the execution time is linearly dependent on the number of messages sent.
Open AccessAn event-driven link-level simulator for validation of AFDX and Ethernet avionics networks
Aircraft are composed of many electronic systems: sensors, displays, navigation equipment and communication elements. These elements require a reliable interconnection, which is a major challenge for communication networks as high reliability and predictability requirements must be verified for safe operation. In addition, their verification via hardware deployments is limited because these are costly and make difficult to try different architectures and configurations, thus delaying the design and development in this area. Therefore, verification at early stages in the design process is of great importance and must be supported by simulation. In this context, this work presents an event-driven link level framework and simulator for the validation of avionics networks. The presented tool supports communication protocols such as Avionics Full-Duplex Switched Ethernet (AFDX), which is a common protocol in avionics, as well as Ethernet, used with static routing. Alsa, accurate results are facilitated by the simulator through the utilization of realistic models for the different devices. The proposed platform is evaluated in Clean Sky's Disruptive Cockpit for Large Passenger Aircraft architecture scenario showing capabilities of the simulator. The speed of the verification is a key factor in its application, so the computational cost is analysed, proving that the execution time is linearly dependent on the number of messages sent.
- Open Access
- 22 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 66743-66756
Verification and Validation Framework for AFDX Avionics Networks
Aircrafts fully rely in a wide variety of electronic systems: sensors, navigation equipment, representation screens and communication elements. The interconnection of these avionics implies a huge challenge for the aircraft communication networks. Extremely stringent requirements in terms of reliability and predictability have to be provided for a safe operation. There are also important limitations to recreate those networks in a prototype form, due to the costs of the related equipment and the interest of testing different architectures and possible configurations dynamically. Moreover, performance estimation approaches based solely on network calculus provide limits for worst-case scenarios, without generating a detailed feedback under different circumstances and configurations of the network and different data sources. In this context, the present work proposes and develops an evaluation framework for avionics networks in order to support the verification and validation (V&V) procedures of the communication system before applying for certification. The proposed framework implements an event-based simulator in Simulink for Avionics Full-Duplex Switched Ethernet (AFDX), one of the most extended data protocols for avionics. This is evaluated in comparison with network calculus and bibliography performance estimation approaches, demonstrating its accuracy and capabilities.
- 22 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 66743-66756
Open AccessVerification and Validation Framework for AFDX Avionics Networks
Aircrafts fully rely in a wide variety of electronic systems: sensors, navigation equipment, representation screens and communication elements. The interconnection of these avionics implies a huge challenge for the aircraft communication networks. Extremely stringent requirements in terms of reliability and predictability have to be provided for a safe operation. There are also important limitations to recreate those networks in a prototype form, due to the costs of the related equipment and the interest of testing different architectures and possible configurations dynamically. Moreover, performance estimation approaches based solely on network calculus provide limits for worst-case scenarios, without generating a detailed feedback under different circumstances and configurations of the network and different data sources. In this context, the present work proposes and develops an evaluation framework for avionics networks in order to support the verification and validation (V&V) procedures of the communication system before applying for certification. The proposed framework implements an event-based simulator in Simulink for Avionics Full-Duplex Switched Ethernet (AFDX), one of the most extended data protocols for avionics. This is evaluated in comparison with network calculus and bibliography performance estimation approaches, demonstrating its accuracy and capabilities.