Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Guangming Lv has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-resolution topology-preserving instance segmentation network for vision-based measurement system of dense welding material stubs

    by Xinyu Chen, Yuchao Chen, Yan Ren, Guangming Lv, Meng Zhang, Yuan Wang

    Accurate counting and morphological analysis of welding electrodes and wire stubs are essential for warehouse data management in welding factories. However, the visual recognition of welding material stubs in real-world industrial applications is frequently hindered by issues such as missed detections, false detections, and imprecise boundary localization. To address these metrological and visual perception challenges, this paper proposes a novel High-resolution Topology-Preserving Instance Segmentation Network (HTP-Net). The proposed end-to-end architecture seamlessly integrates three core designs to realize precise decoupling and robust counting of dense targets. Specifically, a Wavelet-Driven Edge-Preserving module is designed to retain subtle physical boundaries without loss during feature downsampling. Concurrently, a long-range topology representation Block mitigates topological disconnections resulting from extreme target slenderness by global context modeling. Finally, an Orientation-Driven Instance Segmentation Head leverages rotational geometric priors to fundamentally resolve excessive Non-Maximum Suppression and overlapping mask artifacts. Notably, across both our custom and public datasets of dense slender materials, HTP-Net achieves substantial performance gains over existing methods, improving m A P 50 scores by at least 1.2% and up to 55.3%. Furthermore, we developed an intelligent counting system for welding materials powered by the proposed model, which has been deployed and validated in a real-world factory environment. Extensive experiments demonstrate that the integrated system achieves average recognition accuracies of 99% and 94% for electrode and wire stubs, respectively.

  • Mechanical performance and failure mechanisms of double-flush riveted composite joints via stress regulation

    by Guangming Lv, Chang Liu, Peng Li, Ligang Qu, Yongqi Ji

    To address stress concentration around the hole caused by the coupled effect of upsetting expansion and axial load in countersunk riveting of composite wing structures, and building on previous work that validated the effectiveness of a novel sleeve-type rivet in reducing contact stresses, this study further investigates the mechanical performance and failure mechanisms of double-flush riveted composite joints using this novel rivet. Through riveting simulations and quasi-static tests, the pull-out strength, shear strength, and fatigue life were systematically evaluated, along with failure mode evolution and fatigue-critical zone distribution. Results show that the sleeve-type rivet reduces the average stress around the countersunk hole by 18% and significantly narrows the high-stress region. The pull-out and shear strengths are improved by 30% and 47.5%, respectively. The failure mode transitions from upsetting-head plastic contraction in conventional joints to shank necking fracture. The fatigue-critical zone shifts from a concentrated distribution along the head-interface line to a dispersed axial pattern, and fatigue life is extended by approximately one order of magnitude. This study provides a mechanical performance basis for engineering application of the novel rivet and offers technical support for achieving low-stress, high-reliability countersunk composite joints.

  • Open Access

    Study on the Damage Evolution and Suppression of a CFRP Wedge-Structure Countersunk Rivet

    by Guangming Lv, Xian Luo, Ligang Qu, Jing Li, Chang Liu, Xuan Zhang

    During the hammer riveting of aircraft composite wing trailing edges, issues such as unclear damage mechanisms resulting from the continuous impact loading of composite materials, difficulty ensuring connection strength, and issues with damage control remain unresolved. This study investigates the dynamic impact load transfer mechanism during hammer riveting, establishes a model which maps the correlation between impact loads and rivet plastic flow, and develops a composite material VUMAT subroutine (a user-defined material subroutine in Abaqus/Explicit) based on the 3D Hashin failure criterion. A progressive damage simulation model for composite materials subjected to multiple hammer riveting operations is constructed. Based on mechanical analysis, a double-sided countersunk rivet with a support structure is proposed to suppress damage during composite hammer riveting. Simulation and experimental analysis demonstrate that, compared to conventional rivets, the new rivet effectively reduces contact stress (by up to 32.29%). Damage zones are concentrated at the straight hole and at the junction between the straight and countersunk holes. Furthermore, damage modes are simplified to matrix compression and tensile stress, with their respective proportions decreasing by 16.7% and 25.9%.


  • Open Access

    A CAD-Based Method for 3D Scanning Path Planning and Pose Control

    by Jing Li, Pengfei Su, Ligang Qu, Guangming Lv, Wenhui Qian

    To address the technical bottlenecks of low path planning efficiency and insufficient point cloud coverage in the automated 3D scanning of complex structural components, this study proposes an offline method for the generation and optimization of scanning paths based on CAD models. Discrete sampling of the model’s surface is achieved through the construction of an oriented bounding box (OBB) and a linear object–triangular mesh intersection algorithm, thereby obtaining a discrete point set of the model. Incorporating a standard vector analysis of the discrete points and the kinematic constraints of the scanning system, a scanner pose parameter calculation model is established. An improved nearest neighbor search algorithm is employed to generate a globally optimized scanning path, and an adaptive B-spline interpolation algorithm is applied to path smoothing. A joint MATLAB (R2023b)—RobotStudio (6.08) simulation platform is developed to facilitate the entire process, from model pre-processing and path planning to path verification. The experimental results demonstrate that compared with the traditional manual teaching methods, the proposed approach achieves a 25.4% improvement in scanning efficiency and an 18.6% increase in point cloud coverage when measuring typical complex structural components. This study offers an intelligent solution for the efficient and accurate measurement of large-scale complex parts and holds significant potential for broad engineering applications.


  • Open Access

    Dynamic Positioning and Optimization of Magnetic Target Based on Binocular Vision

    by Jing Li, Yang Wang, Ligang Qu, Guangming Lv, Zhenyu Cao

    Aiming at the problems of visual occlusion, reduced positioning accuracy and pose loss in the dynamic scanning process of aviation large components, this paper proposes a binocular vision dynamic positioning method based on magnetic target. This method detects the spatial coordinates of the magnetic target in real time through the binocular camera, extracts the target center to construct a unified reference system of the measurement platform, and uses MATLAB simulation to analyze the influence of different target layouts on the scanning stability and positioning accuracy. On this basis, a dual-objective optimization model with the objectives of ‘minimizing the number of targets’ and ‘spatial distribution uniformity’ is established, and Monte Carlo simulation is used to evaluate the robustness under Gaussian noise and random frame loss interference. The experimental results on the C-Track optical tracking platform show that the optimized magnetic target layout reduces the rotation error of the dynamic scanning from 0.055° to 0.035°, the translation error from 0.31 mm to 0.162 mm, and the scanning efficiency is increased by 33%, which significantly improves the positioning accuracy and tracking stability of the system under complex working conditions. This method provides an effective solution for high-precision dynamic measurement of aviation large components.


  • Open Access

    Mechanism of Friction Reduction in Surface Micro-Textured Mandrels During Hole Cold Expansion

    by Guangming Lv, Zhiyuan Wang, Ligang Qu, Jing Li, Chang Liu

    Aiming at the engineering problems of the severe wear and limited service life of mandrels during the hole extrusion strengthening of critical aerospace components, this study proposes a surface modification strategy for mandrels based on the anti-friction mechanism of micro-textures. Based on the Lame stress equation and the Mises yield criterion, a plastic strengthening stress distribution model of the hole wall was developed. Integrating Bowden’s adhesive friction theory, a parameterized numerical model was constructed to investigate the influence of micro-texture morphology on interfacial friction and wear behavior. An elastic–plastic contact model for micro-textured mandrels during hole extrusion strengthening was established using ANSYS. The effects of key parameters such as the micro-texture depth and area ratio on the contact pressure field, friction stress distribution, and strengthening performance were quantitatively analyzed. The results show that a circular micro-texture with a depth of 50 μm and an area ratio of 20% can reduce the fluctuation and peak value of the contact pressure by 41.0% and 29.7%, respectively, and decrease the average friction stress by 8.1%. The interfacial wear resistance and the uniformity of the residual compressive stress distribution on the hole wall are significantly enhanced, providing tribological insight and surface optimization guidance for improving the anti-wear performance and extending the service life of mandrels.


  • Open Access

    Study on Dynamic Scanning Trajectory of Large Aerospace Parts Based on 3D Scanning

    by Jing Li, Yang Wang, Ligang Qu, Minghai Wang, Guangming Lv, Pengfei Su

    The aim of manufacturing large aerospace parts for the three-dimensional scanning field demands high precision and efficiency. However, it may be more challenging to meet the full coverage of the measurement problems for large aerospace parts with the scanning range of traditional three-dimensional scanning methods. This paper establishes a dynamic posturing scanning measurement system for large aerospace parts with a six-degree-of-freedom posturing platform and a six-degree-of-freedom industrial robot linkage. It establishes a mathematical model of dynamic three-dimensional scanning posturing. It proposes a platform attitude adjustment strategy based on the field of view angle of a 3D scanner during the adjustment of a six-degree-of-freedom platform. The dynamic scanning path planning is carried out using the three-dimensional spatial decomposition method, and the vector coordinates of the critical points at the edges of the missing areas of the scan are used to re-scan the missing areas to establish the dynamic scanning paths of large aerospace parts. It is experimentally verified that the system can realize the dynamic scanning of complex curved large aerospace parts. The experimental results show that the measurement efficiency is improved by more than 75%, and the point cloud coverage of the scanning reconstruction is improved by 18% for large aerospace components with complex surfaces.


  • Open Access

    Rivet Structural Design and Process Optimization for the Double-Sided Countersunk Riveting of Composite Wedge Structures

    by Ligang Qu, Peng Li, Guangming Lv, Jing Li, Xian Luo

    Within the double-sided countersunk riveting process of aircraft wings with a composite wedge structure, riveting consistency is poor, and composite damage is severe, which seriously affects the performance and reliability of the aircraft structure. This paper used the principal stress method to establish a stress model of countersunk riveting, and, based on the analysis of the stress on the structure during the pressure-riveting process, a composite structure rivet was designed. A finite element simulation model of the double-sided countersunk riveting of composite wedge structures’ composite rivets was established. The influences of the structure and the matching parameters of composite rivets on both the plastic flow of pressure riveting and the compressive stress of the structure during the pressure-riveting process were analyzed. The structural parameters and riveting process of composite rivets were optimized. The results show that the composite rivet structure could significantly reduce the contact-compressive stress at the riveting joint by more than 20%, thereby reducing the damage caused by the riveting to the composite material. For 4 mm rivets, an aperture of 4.04~4.06 mm can achieve precise relative interference riveting at 0.6% to 1.0%. Employing a 2.6 mm rivet elongation can exactly fill the countersunk hole of the wedge.


  • Open Access

    Research on Three-Dimensional Scanning Path Planning of Casing Parts Based on Industrial Robot

    by Jing Li, Minghai Wang, Ligang Qu, Guangming Lv

    According to the requirements for the rapid scanning and measurement of the geometric shape during the process of chemical milling of an aviation engine casing, the scanning path of the casing is planned and studied. This paper introduces the principle and method of the tracking scanner and automatic measuring system and analyzes the scanning area range, approach distance, and wide angle of the field. The casing process is modeled by applying part of the machine, obtaining a series of scanning path point and synthesizing the scanning trajectory. On this basis, the entire scanning process is divided into two alternating actions: scanning measurement and posture adjustment, and the mathematical model of the annular scanning path on the outer surface of the casing part is obtained. Adjusting the scan height was used to solve the repeated scan area problem, and the results show that the adjustment method effectively shortened the scan path’s length and time. The simulation method verifies the planned finite ring-scanning path, which verifies the correctness and feasibility of the mathematical model. Through the automatic scanning reconstruction process test, the reconstruction rate of the ring scanning trajectory reaches 85%, which is 80% higher than the manual detection efficiency.


  • Open Access

    Influence of Contact Interface Friction on Plastic Deformation of Stretch-Bend Forming

    by Shengfang Zhang, Guangming Lv, Fujian Ma, Ziguang Wang, Yu Liu

    The contact interface friction between the specimen and the mold during the stretch-bend is a complex interactive process. Friction causes the uneven distribution of tensile stress on the specimen, which affects the plastic flow of the forming material and the spring-back after forming. In this paper, the analytical model of frictional shear stress and tensile stress distribution in the contact mold segment of the stretch and bend synchronous loading stage was established. The influence law of friction coefficient and contact mold angle on the stress–strain distribution of the specimen contact mold segment was discussed. The effect of key factors affecting the friction state of the contact interface (mold surface roughness and contact mold angle) on the shrinkage deformation of the cross-section and the tensile deformation gradient of the specimen was analyzed by equivalent stretch-bend forming experiments. The results showed that the smaller the surface roughness of the mold was, the better the friction state of the contact interface was, the plastic deformation of the specimen was more uniform, and the difference between the section shrinkage and elongation of the contact mold segment and the suspension segment was smaller. Reducing the contact mold angle of the stretch-bend can bring down the tensile stress difference at both ends of the contact mold segment of the specimen so that the section shrinkage and tensile elongation of the contact mold segment and the suspension segment tend to be consistent.