Ziguang Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ziguang Wang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Shengfang Zhang
School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China
3 shared publications - Zhihua Sha
Dalian Jiaotong University
3 shared publications - Fujian Ma
School of Mechanical Engineering, Dalian Jiaotong University, Dalian, China
2 shared publications - Yu Liu
Dalian Jiaotong University
2 shared publications - Cheng Liu
School of Traffic and Transportation Engineering, Dalian Jiaotong University, Dalian 116028, China
1 shared publication - Fujian Ma
School of Mechanical Engineering, Dalian Jiaotong University, Dalian 116028, China
1 shared publication
Latest Publications
- Open Access
Three-Dimensional Temperature Field Model for Multi-Pulse Nanosecond Laser Ablation of Polycrystalline Diamond
Polycrystalline diamond has great potential for power-device heat dissipation and precision manufacturing owing to its exceptional hardness, excellent thermal conductivity, and superior wear resistance. However, the challenges of material removal and controlling thermal damage hinder high-quality machining. In this study, a three-dimensional transient temperature field model is developed for multi-pulse nanosecond laser ablation of polycrystalline diamond. The model incorporates the Gaussian spatial distribution of laser energy, Lambert–Beer depth-dependent absorption, multi-pulse energy superposition, and three-dimensional heat conduction. The heat conduction equation is numerically solved using MATLAB, and lateral and longitudinal temperature gradients are introduced to characterize thermal accumulation and material removal behavior. The model is validated by comparing the predicted ablation depths with experimental measurements, which show consistent variation trends. The results indicate that increasing the number of scans, single-pulse energy, and pulse frequency enhances thermal accumulation, expands the microgroove width, and increases the ablation depth, whereas increasing the scanning speed weakens thermal accumulation and reduces the ablation depth. In addition, a shorter pulse width increases the instantaneous power density and strengthens near-surface thermal concentration. This study provides theoretical guidance for controlling the heat-affected region and optimizing process parameters in precision laser machining of diamond.
Open AccessThree-Dimensional Temperature Field Model for Multi-Pulse Nanosecond Laser Ablation of Polycrystalline Diamond
Polycrystalline diamond has great potential for power-device heat dissipation and precision manufacturing owing to its exceptional hardness, excellent thermal conductivity, and superior wear resistance. However, the challenges of material removal and controlling thermal damage hinder high-quality machining. In this study, a three-dimensional transient temperature field model is developed for multi-pulse nanosecond laser ablation of polycrystalline diamond. The model incorporates the Gaussian spatial distribution of laser energy, Lambert–Beer depth-dependent absorption, multi-pulse energy superposition, and three-dimensional heat conduction. The heat conduction equation is numerically solved using MATLAB, and lateral and longitudinal temperature gradients are introduced to characterize thermal accumulation and material removal behavior. The model is validated by comparing the predicted ablation depths with experimental measurements, which show consistent variation trends. The results indicate that increasing the number of scans, single-pulse energy, and pulse frequency enhances thermal accumulation, expands the microgroove width, and increases the ablation depth, whereas increasing the scanning speed weakens thermal accumulation and reduces the ablation depth. In addition, a shorter pulse width increases the instantaneous power density and strengthens near-surface thermal concentration. This study provides theoretical guidance for controlling the heat-affected region and optimizing process parameters in precision laser machining of diamond.
- Open Access
- 20 June 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (12) , 5320
Research on Fault Prediction Method for Electric Multiple Unit Gearbox Based on Gated Recurrent Unit–Hidden Markov Model
Due to the limited availability of fault samples and the expensive nature of marking fault samples in Electric Multiple Unit (EMU) gearbox monitoring data, a study was conducted to simulate the degradation process of key components in the CRH5 gearbox using rigid–flexible coupling dynamics. Vibration acceleration data from the simulation were utilized to create a six-dimensional hybrid feature domain representing the degradation process. By leveraging the capabilities of the Hidden Markov Model (HMM) for handling hidden transitive probabilities in temporal data and Gated Recurrent Unit (GRU) for addressing long-distance and high-dependence temporal data, a GRU-HMM fault prediction model was developed. This model was validated using monitoring data and the six-dimensional hybrid feature domain from the CRH5 gearbox and compared against actual maintenance records. The findings indicated that the GRU-HMM fault prediction model can effectively recognize the degradation patterns of multiple components, offering higher accuracy in fault prediction compared to traditional models. These research outcomes are expected to optimize EMU maintenance schedules based on usage conditions, enhance EMU utilization rates, and reduce operational and maintenance costs, thereby providing valuable theoretical support.
- 20 June 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (12) , 5320
Open AccessResearch on Fault Prediction Method for Electric Multiple Unit Gearbox Based on Gated Recurrent Unit–Hidden Markov Model
Due to the limited availability of fault samples and the expensive nature of marking fault samples in Electric Multiple Unit (EMU) gearbox monitoring data, a study was conducted to simulate the degradation process of key components in the CRH5 gearbox using rigid–flexible coupling dynamics. Vibration acceleration data from the simulation were utilized to create a six-dimensional hybrid feature domain representing the degradation process. By leveraging the capabilities of the Hidden Markov Model (HMM) for handling hidden transitive probabilities in temporal data and Gated Recurrent Unit (GRU) for addressing long-distance and high-dependence temporal data, a GRU-HMM fault prediction model was developed. This model was validated using monitoring data and the six-dimensional hybrid feature domain from the CRH5 gearbox and compared against actual maintenance records. The findings indicated that the GRU-HMM fault prediction model can effectively recognize the degradation patterns of multiple components, offering higher accuracy in fault prediction compared to traditional models. These research outcomes are expected to optimize EMU maintenance schedules based on usage conditions, enhance EMU utilization rates, and reduce operational and maintenance costs, thereby providing valuable theoretical support.
- Open Access
Machining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing
Titanium alloys are widely used in aerospace, the military industry, electronics, automotive fields, etc., due to their excellent properties such as low density, high strength, high-temperature resistance, and corrosion resistance. Many components need to be finished precisely after being cut in these applications. In order to achieve high-quality and high-efficiency finishing of titanium alloys, ultrasonic-assisted magnetic abrasive finishing (UAMAF) was introduced in this research. The machining performance for UAMAF of a titanium alloy was studied by experimentally comparing UAMAF and magnetic abrasive finishing (MAF). The results show that the cutting force of UAMAF can reach 2 to 4 times that of MAF, and it decreases rapidly with the increase in the machining gap due to the energy loss of ultrasonic impact in the transmission between magnetic abrasives. The surface roughness of UAMAF can reach about Ra 0.075 μm, which is reduced by about 59% compared with MAF. The main wear type of the magnetic abrasive is that the diamond grits fell off the magnetic abrasive in both UAMAF and MAF. The uniform wear of the magnetic abrasive is realized, and the utilization ratio of the magnetic abrasive is obviously improved in UAMAF.
Open AccessMachining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing
Titanium alloys are widely used in aerospace, the military industry, electronics, automotive fields, etc., due to their excellent properties such as low density, high strength, high-temperature resistance, and corrosion resistance. Many components need to be finished precisely after being cut in these applications. In order to achieve high-quality and high-efficiency finishing of titanium alloys, ultrasonic-assisted magnetic abrasive finishing (UAMAF) was introduced in this research. The machining performance for UAMAF of a titanium alloy was studied by experimentally comparing UAMAF and magnetic abrasive finishing (MAF). The results show that the cutting force of UAMAF can reach 2 to 4 times that of MAF, and it decreases rapidly with the increase in the machining gap due to the energy loss of ultrasonic impact in the transmission between magnetic abrasives. The surface roughness of UAMAF can reach about Ra 0.075 μm, which is reduced by about 59% compared with MAF. The main wear type of the magnetic abrasive is that the diamond grits fell off the magnetic abrasive in both UAMAF and MAF. The uniform wear of the magnetic abrasive is realized, and the utilization ratio of the magnetic abrasive is obviously improved in UAMAF.
- Open Access
Influence of Contact Interface Friction on Plastic Deformation of Stretch-Bend Forming
The contact interface friction between the specimen and the mold during the stretch-bend is a complex interactive process. Friction causes the uneven distribution of tensile stress on the specimen, which affects the plastic flow of the forming material and the spring-back after forming. In this paper, the analytical model of frictional shear stress and tensile stress distribution in the contact mold segment of the stretch and bend synchronous loading stage was established. The influence law of friction coefficient and contact mold angle on the stress–strain distribution of the specimen contact mold segment was discussed. The effect of key factors affecting the friction state of the contact interface (mold surface roughness and contact mold angle) on the shrinkage deformation of the cross-section and the tensile deformation gradient of the specimen was analyzed by equivalent stretch-bend forming experiments. The results showed that the smaller the surface roughness of the mold was, the better the friction state of the contact interface was, the plastic deformation of the specimen was more uniform, and the difference between the section shrinkage and elongation of the contact mold segment and the suspension segment was smaller. Reducing the contact mold angle of the stretch-bend can bring down the tensile stress difference at both ends of the contact mold segment of the specimen so that the section shrinkage and tensile elongation of the contact mold segment and the suspension segment tend to be consistent.
Open AccessInfluence of Contact Interface Friction on Plastic Deformation of Stretch-Bend Forming
The contact interface friction between the specimen and the mold during the stretch-bend is a complex interactive process. Friction causes the uneven distribution of tensile stress on the specimen, which affects the plastic flow of the forming material and the spring-back after forming. In this paper, the analytical model of frictional shear stress and tensile stress distribution in the contact mold segment of the stretch and bend synchronous loading stage was established. The influence law of friction coefficient and contact mold angle on the stress–strain distribution of the specimen contact mold segment was discussed. The effect of key factors affecting the friction state of the contact interface (mold surface roughness and contact mold angle) on the shrinkage deformation of the cross-section and the tensile deformation gradient of the specimen was analyzed by equivalent stretch-bend forming experiments. The results showed that the smaller the surface roughness of the mold was, the better the friction state of the contact interface was, the plastic deformation of the specimen was more uniform, and the difference between the section shrinkage and elongation of the contact mold segment and the suspension segment was smaller. Reducing the contact mold angle of the stretch-bend can bring down the tensile stress difference at both ends of the contact mold segment of the specimen so that the section shrinkage and tensile elongation of the contact mold segment and the suspension segment tend to be consistent.