Inger Graves
Research Subjects
Inger Graves has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Harald Tholo
Aanderaa-Xylem, 5225 Nesttun, Norway
2 shared publications - Lars Robert Hole
Norwegian Meteorological Institute, 5007 Bergen, Norway
2 shared publications - Lionel Camus
Akvaplan-Niva, 0579 Oslo, Norway
2 shared publications - Nellie Wullenweber
Plentzia Marine Station (PiE-UPV/EHU), University of the Basque Country, 48620 Plentzia, Spain
2 shared publications - Peygham Ghaffari
Akvaplan-niva, Department of Arctic R&D
2 shared publications - Astrid Marie Skålvik
NORCE Research AS, Bergen, Norway, Norway
1 shared publication
Latest Publications
- Open Access
A Modular Smart Ocean Observatory for Development of Sensors, Underwater Communication and Surveillance of Environmental Parameters
The rapid growth of marine industries has emphasized the focus on environmental impacts for all industries, as well as the influence of key environmental parameters on, for instance, offshore wind or aquaculture performance, animal welfare and structural integrity of different constructions. Development of automatized sensors together with efficient communication and information systems will enhance surveillance and monitoring of environmental processes and impact. We have developed a modular Smart Ocean observatory, in this case connected to a large-scale marine aquaculture research facility. The first sensor rigs have been operational since May 2022, transmitting environmental data in near real-time. Key components are Acoustic Doppler Current Profilers (ADCPs) for measuring directional wave and current parameters, and CTDs for redundant measurement of depth, temperature, conductivity and oxygen. Communication is through 4G network or cable. However, a key purpose of the observatory is also to facilitate experiments with acoustic wireless underwater communication, which are ongoing. The aim is to expand the system(s) with demersal independent sensor nodes communicating through an “Internet of Underwater Things (IoUT)”, covering larger areas in the coastal zone, as well as open waters, of benefit to all ocean industries. The observatory also hosts experiments for sensor development, biofouling control and strategies for sensor self-validation and diagnostics. The close interactions between the experiments and the infrastructure development allow a holistic approach towards environmental monitoring across sectors and industries, plus to reduce the carbon footprint of ocean observation. This work is intended to lay a basis for sophisticated use of smart sensors with communication systems in long-term autonomous operation in remote as well as nearshore locations.
Open AccessA Modular Smart Ocean Observatory for Development of Sensors, Underwater Communication and Surveillance of Environmental Parameters
The rapid growth of marine industries has emphasized the focus on environmental impacts for all industries, as well as the influence of key environmental parameters on, for instance, offshore wind or aquaculture performance, animal welfare and structural integrity of different constructions. Development of automatized sensors together with efficient communication and information systems will enhance surveillance and monitoring of environmental processes and impact. We have developed a modular Smart Ocean observatory, in this case connected to a large-scale marine aquaculture research facility. The first sensor rigs have been operational since May 2022, transmitting environmental data in near real-time. Key components are Acoustic Doppler Current Profilers (ADCPs) for measuring directional wave and current parameters, and CTDs for redundant measurement of depth, temperature, conductivity and oxygen. Communication is through 4G network or cable. However, a key purpose of the observatory is also to facilitate experiments with acoustic wireless underwater communication, which are ongoing. The aim is to expand the system(s) with demersal independent sensor nodes communicating through an “Internet of Underwater Things (IoUT)”, covering larger areas in the coastal zone, as well as open waters, of benefit to all ocean industries. The observatory also hosts experiments for sensor development, biofouling control and strategies for sensor self-validation and diagnostics. The close interactions between the experiments and the infrastructure development allow a holistic approach towards environmental monitoring across sectors and industries, plus to reduce the carbon footprint of ocean observation. This work is intended to lay a basis for sophisticated use of smart sensors with communication systems in long-term autonomous operation in remote as well as nearshore locations.
- Open Access
SailBuoy Ocean Currents: Low-Cost Upper-Layer Ocean Current Measurements
This study introduces an alternative to the existing methods for measuring ocean currents based on a recently developed technology. The SailBuoy is an unmanned surface vehicle powered by wind and solar panels that can navigate autonomously to predefined waypoints and record velocity profiles using an integrated downward-looking acoustic Doppler current profiler (ADCP). Data collected on two validation campaigns show a satisfactory correlation between the SailBuoy current records and traditional observation techniques such as bottom-mounted and moored current profilers and moored single-point current meter. While the highest correlations were found in tidal signals, strong current, and calm weather conditions, low current speeds and varying high wave and wind conditions reduced correlation considerably. Filtering out some events with the high sea surface roughness associated with high wind and wave conditions may increase the SailBuoy ADCP listening quality and lead to better correlations. Not yet resolved is a systematic offset between the measurements obtained by the SailBuoy and the reference instruments of ±0.03 m/s. Possible reasons are discussed to be the differences between instruments (various products) as well as changes in background noise levels due to environmental conditions.
Open AccessSailBuoy Ocean Currents: Low-Cost Upper-Layer Ocean Current Measurements
This study introduces an alternative to the existing methods for measuring ocean currents based on a recently developed technology. The SailBuoy is an unmanned surface vehicle powered by wind and solar panels that can navigate autonomously to predefined waypoints and record velocity profiles using an integrated downward-looking acoustic Doppler current profiler (ADCP). Data collected on two validation campaigns show a satisfactory correlation between the SailBuoy current records and traditional observation techniques such as bottom-mounted and moored current profilers and moored single-point current meter. While the highest correlations were found in tidal signals, strong current, and calm weather conditions, low current speeds and varying high wave and wind conditions reduced correlation considerably. Filtering out some events with the high sea surface roughness associated with high wind and wave conditions may increase the SailBuoy ADCP listening quality and lead to better correlations. Not yet resolved is a systematic offset between the measurements obtained by the SailBuoy and the reference instruments of ±0.03 m/s. Possible reasons are discussed to be the differences between instruments (various products) as well as changes in background noise levels due to environmental conditions.
- Open Access
- 21 June 2022
- Published by MDPI AG in Preprints.org
SailBuoy Ocean Currents:Low Cost Upper Layer Ocean Current Measurements
This study introduces an alternative to the existing methods for measuring ocean currents based on a recently developed technology. The SailBuoy is an unmanned surface vehicle powered by wind and solar panels that can navigate autonomously to predefined way-points and record velocity profiles using an integrated downward-looking Acoustic Doppler Profiler (ADCP). Data, collected on two validation campaigns, shows a satisfactory correlation between the SailBuoy current records and traditional observation techniques such as bottom mounted and moored current profilers and moored single-point current meter. While the highest correlations were found in tidal signals, strong current, and calm weather conditions, low current speeds and varying high wave and wind conditions reduced correlation considerably. Filtering out some events with high sea surface roughness associated with high wind and wave conditions may increase the SailBuoy ADCP listening quality and lead to better correlations. Not yet resolved is a systematic offset between the measurements obtained by the SailBuoy and the reference instruments of ± 0.03 m/s. Possible reasons are discussed to be the differences between instruments (various products) as well as changes in background noise levels due to environmental conditions.
- 21 June 2022
- Published by MDPI AG in Preprints.org
Open AccessSailBuoy Ocean Currents:Low Cost Upper Layer Ocean Current Measurements
This study introduces an alternative to the existing methods for measuring ocean currents based on a recently developed technology. The SailBuoy is an unmanned surface vehicle powered by wind and solar panels that can navigate autonomously to predefined way-points and record velocity profiles using an integrated downward-looking Acoustic Doppler Profiler (ADCP). Data, collected on two validation campaigns, shows a satisfactory correlation between the SailBuoy current records and traditional observation techniques such as bottom mounted and moored current profilers and moored single-point current meter. While the highest correlations were found in tidal signals, strong current, and calm weather conditions, low current speeds and varying high wave and wind conditions reduced correlation considerably. Filtering out some events with high sea surface roughness associated with high wind and wave conditions may increase the SailBuoy ADCP listening quality and lead to better correlations. Not yet resolved is a systematic offset between the measurements obtained by the SailBuoy and the reference instruments of ± 0.03 m/s. Possible reasons are discussed to be the differences between instruments (various products) as well as changes in background noise levels due to environmental conditions.