JPJan Przybysz

Jan Przybysz

*This is an algorithmically generated author record based on publicly available information.

Jan Przybysz has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Integrated FT-IR and SPME-GC-MS Evaluation of Toxic Fire Effluents from Plastics Containing Brominated Flame Retardants

    by Monika Borucka, Kamila Mizera, Jan Przybysz, Agnieszka Gajek

    Despite their high effectiveness in reducing material flammability, modern brominated flame retardants (BFRs) remain poorly understood with respect to the toxic substances they generate during combustion. BFRs such as 1,2-bis(pentabromodiphenyl)ethane (DBDPE) and tetrabromophthalate diol (PHT4-DIOL) have been introduced following the limitations on legacy brominated additives. However, their thermal decomposition pathways and toxic product emission profiles under real fire conditions remain poorly characterized. Exposure to elevated temperatures may promote the formation of halogenated toxicants and environmentally persistent compounds, raising concerns that extend beyond conventional fire-safety performance. The combustion behavior of DBDPE-, PHT4-DIOL-, and BFR-containing epoxy resins was investigated using a steady-state tube furnace designed to reproduce realistic fire scenarios. Controlled temperature and ventilation conditions were applied to simulate representative stages of fire. Combustion emissions were comprehensively characterized using Fourier transform infrared spectroscopy (FT-IR) to analyze asphyxiant and irritant gases and solid-phase microextraction gas chromatography–mass spectrometry (SPME-GC-MS) for volatile and semi-volatile organic compounds. The results presented that the incorporation of BFRs substantially altered combustion emission profiles, promoting the formation of brominated and mixed-halogenated species alongside toxic gaseous products. Significant differences in the composition and distribution of combustion byproducts were observed between non-modified and BFR-containing materials, indicating that the environmental and toxicological consequences of these additives cannot be adequately assessed solely through flammability-reduction metrics. These conclusions provide new knowledge of the environmental impacts of brominated flame retardants and highlight the importance of integrated fire-safety assessment strategies that simultaneously consider flame-inhibition efficiency, combustion toxicity, and environmental persistence.


  • Open Access

    Assessing fire hazards of herbicides: Identifying toxic emissions from pesticide combustion

    by Jan Przybysz, Monika Borucka, Agnieszka Gajek, Kamila Mizera


  • Analysis of the Thermal Decomposition and Flammability of Polyurethane Materials Used in Building Insulation and in the Automotive Industry

    by Kamila Mizera, Kamila Sałasińska, Monika Borucka, Jan Przybysz, Agnieszka Gajek

    The development of technology and newer requirements for materials leads to an increase in their production and storage. In the past, serious fires have occurred in public buildings, residential buildings, industrial halls, and warehouses where plastics were used or produced, resulting in disastrous consequences for the environment and human health. For this reason, it is important to examine the risks to people and the environment that arise during a fire in places where these materials are located and stored. Polyurethane foams (PUF) used in building insulation and the automotive industry have been analyzed to determine their flammability and smoke emission during combustion. The thermal stability of PUFs was assessed using simultaneous thermal analysis (STA). Released gases were identified using STA combined with FT‐IR (STA/FT‐IR). Fire resistance and smoke emission during combustion were evaluated using cone calorimetry and a smoke chamber. Differences in thermal decomposition and combustion characteristics, including smoke release, were observed. The combustion of semi‐rigid foam was accompanied by the lowest total smoke release and the lowest total heat release. However, the combustion of flexible foam was characterized by the highest amount of smoke and a high rate of heat release, despite only a 5% weight loss at the highest temperature. In the case of rigid foam, a large residue in the form of a carbonized layer was observed.


  • Właściwości wybuchowe grzybobójczych środków ochrony roślin w formie pyłu

    by Jan Przybysz, Monika Borucka, Kamila Mizera, Agnieszka Gajek

    Trzy dostępne na rynku środki grzybobójcze wpostaci pyłu, zawierające kaptan lub dodynę jako substancję czynną, zbadano pod kątem maksymalnego ciśnienia wybuchu, wskaźnika deflagracji, dolnej granicy wybuchowości i granicznego stężenia tlenu. W wyniku badań w kuli o pojemności 20 L uzyskano kompleksowe dane dotyczące wybuchowości mieszaniny pyłowo-powietrznej powstałej wwyniku rozproszenia środka grzybobójczego w powietrzu. Największe wartości badanych parametrów uzyskano dla produktu zawierającego dodynę. Zawartość substancji aktywnej w badanych środkach ochrony roślin nie wynosi 100%, dlatego wprzypadku czystych substancji parametry mogłyby być znacznie wyższe. Przeprowadzone badania pokazały, że w przypadku powstania pyłowej atmosfery wybuchowej pojawia się poważne zagrożenie spowodowane jej zapłonem. Skutki takiego wybuchu mogą być znacznie większe niż te obserwowane podczas wybuchu pyłów drewna.

  • Zagrożenia stwarzane podczas pożaru z udziałem środków ochrony roślin

    by Monika Borucka, Centralny Instytut Ochrony Pracy – Państwowy Instytut Badawczy, Kamila Mizera, Jan Przybysz, Agnieszka Gajek

  • Zagrożenie pożarem i wybuchem stwarzane przez pozostałości z obróbki drewna

    by Jan Przybysz, Maciej Celiński, Kamila Mizera, Monika Borucka, Agnieszka Gajek

    Przetwarzanie coraz większych ilości drewna powoduje powstawanie coraz większych ilości pyłu drewna. Ryzyko wybuchu mieszanin pyłowo-powietrznych w zakładach przetwórstwa drewna jest wysokie i często pomijane. Zmiana właściwości pyłu drewna może znacząco wpłynąć na parametry wybuchu. Przedstawiono wpływ mieszanin pyłu drewna na właściwości palne i wybuchowe. Testy przeprowadzono dla trzech mieszanin pyłów: (i) mieszaniny dwóch pyłów drewna twardego (buk, dąb), (ii) mieszaniny drewna twardego i miękkiego (brzoza, olcha) oraz (iii) mieszaniny dwóch pyłów drewna miękkiego (sosna, świerk). Testy przeprowadzono dla dwóch zakresów wielkości cząstek, 20–71 µm i 71–125 µm. Stopień rozdrobnienia określono dla wszystkich próbek za pomocą dyfrakcji wiązki laserowej. Zbadano maksymalne ciśnienie wybuchu, wskaźnik deflagracji, minimalną temperaturę zapłonu i minimalną energię zapłonu. Wyniki potwierdzają, że czynnikiem, który ma silny wpływ na charakterystykę wybuchu pyłu jest wielkość rozdrobnienia pyłu

  • Open Access

    Flammability and explosion characteristics of softwood dust

    by Jan Przybysz, Maciej Celiński, Kamila Mizera, Michał Gloc, Monika Borucka, Agnieszka Gajek

    In technical terms, wood is a natural composite material with a polymer matrix, reinforced with fibres made of uniaxially oriented longitudinal cells. Due to the ease of obtaining and relatively low technological requirements related to its processing, wood is a common material used for various types of construction materials. An experimental investigation was carried out to determine the evolution of the ignition sensitivity and the explosion of three types of softwood dusts. Two of those dusts come from conifers and one from a deciduous tree. Complete fire characteristic requires several parameters describing wood dust behaviour under fire conditions including heat release rate (HRR), ignition time, or fire growth index. To determine those parameters, a cone calorimeter was used. Explosion characteristic was tested for representative wood as a dust sample in 20-L spherical vessel. Minimum ignition energy (MIE) was tested on MINOR II apparatus, which is a modified Hartman’s tube. Minimum ignition temperatures were tested with the use of layer ignition temperature apparatus and Godbert–Greenwald apparatus for minimum ignition temperature of a dust layer and dust cloud (MIT), respectively. Dust with the highest KST value, lowest MIE in the widest concentration range, and lowest MIT was pine wood dust. It also shows the shortest ignition time and a timespan between ignition and HRR peak.


  • Flammability and explosion characteristics of hardwood dust

    by Jan Przybysz, Maciej Celiński, Paweł Kozikowski, Kamila Mizera, Monika Borucka, Agnieszka Gajek

    Wood dust consists of the fine particles of wood that are produced when wood is processed. It is considered explosive, especially if it produces a dust cloud. Initiating the combustion process inside the dust–air cloud spreads this process throughout the entire volume. In this article, experiment was carried out to study the influence of type of hardwood on combustion parameters. An experimental investigation was carried out to determine the evolution of the ignition sensitivity, fire behaviour and explosion characteristics of three types of hardwood dust. To determine dust behaviour under fire conditions, a cone calorimeter was used. Explosion characteristics were tested with the use of a 20 L spherical vessel and minimum ignition energy tested on MINOR II Apparatus, which is a modified Hartmann’s Tube. Studies have shown a large effect of particle size on explosion parameters, while for flammability parameters the effect is not so noticeable.