Avadh Bihari Narayan
Research Subjects
Avadh Bihari Narayan has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Ashutosh Tiwari
Indian Institute of Technology, Civil Engineering, India
4 shared publications Onkar Dikshit
3 shared publicationsAshutosh Tiwari
2 shared publications- Onkar Dikshit
Indian Institute of Technology, Kanpur
2 shared publications - A. Govindarajan
Aarthi Scans and Labs Chennai India
1 shared publication - Akhila Vasudeva
Department of Obstetrics and Gynecology, Kasturba Medical College, Manipal Academy of Higher Education, Manipal, Karnataka, India
1 shared publication
Latest Publications
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Multi-temporal InSAR for deformation study (MInDS): A software for deformation monitoring
Multi-temporal SAR Interferometry (MT-InSAR) is one of the widely used modern geodetic techniques for monitoring the surface deformation. By using the spatio-temporal analysis of a stack of differential interferograms, MT-InSAR measures the time series deformation pattern. The analysis separates the deformation component from decorrelation noise, atmospheric error, and inaccurately modelled nuisance parameters. In the initial phase of the development of MT-InSAR approach, only highly coherent pixels, called the persistent scatterers (PS), were used for deformation monitoring. Highly coherent pixels are mostly found either in the urban regions or on the slopes facing the satellite. To estimate the deformation pattern in other regions, moderately coherent pixels, called distributed scatterers (DS), are used. However, before applying spatio-temporal analysis to estimate deformation, the phase information of DS pixels needs to be optimized by the phase triangulation algorithm (PTA).We have developed a software Multi-temporal InSAR for deformation study (MInDS), which uses a similar environment as stamps use. The processing chain of the MInDS processing chain is based on Similar Time-series Interferometric Pixels (STIP), representing the number of neighborhood pixels with similar phase history. In this approach, PS selection and estimation of look angle error is improved by using STIP of the PS pixels. After the selection of PS, the PTA implemented by using complex least squares utilises the phase information of neighboring STIPs to improve the phase coherence of DS pixels. Finally, the deformation pattern of the PS and phase-optimized DS pixels are used for deformation estimation using spatio-temporal analysis.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessMulti-temporal InSAR for deformation study (MInDS): A software for deformation monitoring
Multi-temporal SAR Interferometry (MT-InSAR) is one of the widely used modern geodetic techniques for monitoring the surface deformation. By using the spatio-temporal analysis of a stack of differential interferograms, MT-InSAR measures the time series deformation pattern. The analysis separates the deformation component from decorrelation noise, atmospheric error, and inaccurately modelled nuisance parameters. In the initial phase of the development of MT-InSAR approach, only highly coherent pixels, called the persistent scatterers (PS), were used for deformation monitoring. Highly coherent pixels are mostly found either in the urban regions or on the slopes facing the satellite. To estimate the deformation pattern in other regions, moderately coherent pixels, called distributed scatterers (DS), are used. However, before applying spatio-temporal analysis to estimate deformation, the phase information of DS pixels needs to be optimized by the phase triangulation algorithm (PTA).We have developed a software Multi-temporal InSAR for deformation study (MInDS), which uses a similar environment as stamps use. The processing chain of the MInDS processing chain is based on Similar Time-series Interferometric Pixels (STIP), representing the number of neighborhood pixels with similar phase history. In this approach, PS selection and estimation of look angle error is improved by using STIP of the PS pixels. After the selection of PS, the PTA implemented by using complex least squares utilises the phase information of neighboring STIPs to improve the phase coherence of DS pixels. Finally, the deformation pattern of the PS and phase-optimized DS pixels are used for deformation estimation using spatio-temporal analysis.
- Open Access
- 28 March 2022
- Published by Copernicus GmbH
InSAR phase unwrapping using Graph neural networks
Advancements in processing strategies of time series interferometric synthetic aperture radar (InSAR) has resulted in improved deformation monitoring and DEM generation. Both of the applications use phase unwrapping, which involves finding and adding the unknown correct number of phase cycles to the wrapped phase. It is an inverse process of recovering the absolute phase from the wrapped phase, and the objective is to remove the 2π-multiple ambiguity. Ideally, it could be achieved by addition or subtraction of 2π at each pixel depending on the phase difference between the neighboring pixels. The problem appears effortless but brings challenges due to noise and inconsistencies. The conventional methods require improvements in terms of accurately estimating the unknown number of phase cycles and dealing with phase jumps. Recently, deep learning methods have been used extensively in the domain of remote sensing to solve complex image processing problems such as object detection and localization, image classification, etc. Since all the pixels in a stack of interferograms are not used in unwrapping, and the pixels used are scattered irregularly, modeling the unwrapping problem as an image classification problem is infeasible. In this work, we deploy Graph Neural Networks (GNNs), a class of deep learning methods designed to infer information from input graphs to solve the unwrapping problem. Phase unwrapping can be posed as a node classification problem using GNN, where each pixel is treated as a node. The method is aimed to exploit the capability of GNNs in correctly predicting the phase count of each pixel. The proposed work aims to improve the computational efficiency and accuracy of the unwrapping process, resulting in reliable estimation of displacement.
- 28 March 2022
- Published by Copernicus GmbH
Open AccessInSAR phase unwrapping using Graph neural networks
Advancements in processing strategies of time series interferometric synthetic aperture radar (InSAR) has resulted in improved deformation monitoring and DEM generation. Both of the applications use phase unwrapping, which involves finding and adding the unknown correct number of phase cycles to the wrapped phase. It is an inverse process of recovering the absolute phase from the wrapped phase, and the objective is to remove the 2π-multiple ambiguity. Ideally, it could be achieved by addition or subtraction of 2π at each pixel depending on the phase difference between the neighboring pixels. The problem appears effortless but brings challenges due to noise and inconsistencies. The conventional methods require improvements in terms of accurately estimating the unknown number of phase cycles and dealing with phase jumps. Recently, deep learning methods have been used extensively in the domain of remote sensing to solve complex image processing problems such as object detection and localization, image classification, etc. Since all the pixels in a stack of interferograms are not used in unwrapping, and the pixels used are scattered irregularly, modeling the unwrapping problem as an image classification problem is infeasible. In this work, we deploy Graph Neural Networks (GNNs), a class of deep learning methods designed to infer information from input graphs to solve the unwrapping problem. Phase unwrapping can be posed as a node classification problem using GNN, where each pixel is treated as a node. The method is aimed to exploit the capability of GNNs in correctly predicting the phase count of each pixel. The proposed work aims to improve the computational efficiency and accuracy of the unwrapping process, resulting in reliable estimation of displacement.
- Open Access
- 14 October 2021
- Published by Wiley in Ultrasound in Obstetrics & Gynecology
- Vol. 58 (S1) , 33
OC11.02: A multicentre, multi‐device validation of a deep learning system for the automated segmentation of fetal brain structures from two‐dimensional ultrasound images
- 14 October 2021
- Published by Wiley in Ultrasound in Obstetrics & Gynecology
- Vol. 58 (S1) , 33
Open AccessOC11.02: A multicentre, multi‐device validation of a deep learning system for the automated segmentation of fetal brain structures from two‐dimensional ultrasound images
- 1 August 2020
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 166, 169-182
Deep learning networks for selection of measurement pixels in multi-temporal SAR interferometric processing
- 1 August 2020
- Published by Elsevier in ISPRS Journal of Photogrammetry and Remote Sensing
- Vol. 166, 169-182
Deep learning networks for selection of measurement pixels in multi-temporal SAR interferometric processing
- Open Access
Deep learning networks for selection of persistent scatterer pixels in multi-temporal SAR interferometric processing
In multi-temporal SAR interferometry (MT-InSAR), persistent scatterer (PS) pixels are used to estimate geophysical parameters, essentially deformation. Conventionally, PS pixels are selected on the basis of the estimated noise present in the spatially uncorrelated phase component along with look-angle error in a temporal interferometric stack. In this study, two deep learning architectures, namely convolutional neural network for interferometric semantic segmentation (CNN-ISS) and convolutional long short term memory network for interferometric semantic segmentation (CLSTM-ISS), based on learning spatial and spatio-temporal behaviour respectively, were proposed for selection of PS pixels. These networks were trained to relate the interferometric phase history to its classification into phase stable (PS) and phase unstable (non-PS) measurement pixels using ~10,000 real world interferometric images of different study sites containing man-made objects, forests, vegetation, uncropped land, water bodies, and areas affected by lengthening, foreshortening, layover and shadowing. The networks were trained using training labels obtained from the Stanford method for Persistent Scatterer Interferometry (StaMPS) algorithm. However, pixel selection results, when compared to a combination of R-index and a classified image of the test dataset, reveal that CLSTM-ISS estimates improved the classification of PS and non-PS pixels compared to those of StaMPS and CNN-ISS. The predicted results show that CLSTM-ISS reached an accuracy of 93.50%, higher than that of CNN-ISS (89.21%). CLSTM-ISS also improved the density of reliable PS pixels compared to StaMPS and CNN-ISS and outperformed StaMPS and other conventional MT-InSAR methods in terms of computational efficiency.
Open AccessDeep learning networks for selection of persistent scatterer pixels in multi-temporal SAR interferometric processing
In multi-temporal SAR interferometry (MT-InSAR), persistent scatterer (PS) pixels are used to estimate geophysical parameters, essentially deformation. Conventionally, PS pixels are selected on the basis of the estimated noise present in the spatially uncorrelated phase component along with look-angle error in a temporal interferometric stack. In this study, two deep learning architectures, namely convolutional neural network for interferometric semantic segmentation (CNN-ISS) and convolutional long short term memory network for interferometric semantic segmentation (CLSTM-ISS), based on learning spatial and spatio-temporal behaviour respectively, were proposed for selection of PS pixels. These networks were trained to relate the interferometric phase history to its classification into phase stable (PS) and phase unstable (non-PS) measurement pixels using ~10,000 real world interferometric images of different study sites containing man-made objects, forests, vegetation, uncropped land, water bodies, and areas affected by lengthening, foreshortening, layover and shadowing. The networks were trained using training labels obtained from the Stanford method for Persistent Scatterer Interferometry (StaMPS) algorithm. However, pixel selection results, when compared to a combination of R-index and a classified image of the test dataset, reveal that CLSTM-ISS estimates improved the classification of PS and non-PS pixels compared to those of StaMPS and CNN-ISS. The predicted results show that CLSTM-ISS reached an accuracy of 93.50%, higher than that of CNN-ISS (89.21%). CLSTM-ISS also improved the density of reliable PS pixels compared to StaMPS and CNN-ISS and outperformed StaMPS and other conventional MT-InSAR methods in terms of computational efficiency.
- 23 October 2018
- Published by Taylor & Francis in Geocarto International
- Vol. 35 (5) , 535-558
Monitoring of landslide activity at the Sirobagarh landslide, Uttarakhand, India, using LiDAR, SAR interferometry and geodetic surveys
A robust geodetic framework comprising Terrestrial Laser Scanner (TLS), Global Navigation Satellite Systems (GNSS), Robotic Total Station (RTS) and Multi-temporal InSAR (MT-InSAR) was employed first in India to investigate a landslide-prone Sirobagarh region, Uttarakhand at different spatial extents, and to evaluate the relationship amongst the displacement estimates obtained from the applied surveying techniques. TLS derived digital elevation models indicated displacements >5 m on the landslide upper scarp. GNSS and RTS based observations showed horizontal movements towards the Alaknanda river in the landslide slope direction (maximum values: 0.1305 and 0.045 m respectively), and downward vertical motion (largest subsidence magnitude: -2.1315 and -0.030 m respectively). MT-InSAR processing of Sentinel-1a images identified 21071 measurement pixels, highlighting subsidence around the landslide (mean velocity range: -0.110 to 0.008 m/yr). Analysis of displacement vectors using vector equality, cross-covariance, cross-correlation and Principal Component Analysis reveals that GNSS vertical displacement estimates were partially correlated with MT-InSAR measurements (correlated for epoch difference 2-3), whereas there was good cross-correlation between MT-InSAR and LiDAR observations throughout. The displacement estimates and their analyses evident unstable movement of the landslide scarp occurring due to debris flow and rainfall, and a relatively moderate subsidence activity in the surrounding areas lying in the landslide zone.
- 23 October 2018
- Published by Taylor & Francis in Geocarto International
- Vol. 35 (5) , 535-558
Monitoring of landslide activity at the Sirobagarh landslide, Uttarakhand, India, using LiDAR, SAR interferometry and geodetic surveys
A robust geodetic framework comprising Terrestrial Laser Scanner (TLS), Global Navigation Satellite Systems (GNSS), Robotic Total Station (RTS) and Multi-temporal InSAR (MT-InSAR) was employed first in India to investigate a landslide-prone Sirobagarh region, Uttarakhand at different spatial extents, and to evaluate the relationship amongst the displacement estimates obtained from the applied surveying techniques. TLS derived digital elevation models indicated displacements >5 m on the landslide upper scarp. GNSS and RTS based observations showed horizontal movements towards the Alaknanda river in the landslide slope direction (maximum values: 0.1305 and 0.045 m respectively), and downward vertical motion (largest subsidence magnitude: -2.1315 and -0.030 m respectively). MT-InSAR processing of Sentinel-1a images identified 21071 measurement pixels, highlighting subsidence around the landslide (mean velocity range: -0.110 to 0.008 m/yr). Analysis of displacement vectors using vector equality, cross-covariance, cross-correlation and Principal Component Analysis reveals that GNSS vertical displacement estimates were partially correlated with MT-InSAR measurements (correlated for epoch difference 2-3), whereas there was good cross-correlation between MT-InSAR and LiDAR observations throughout. The displacement estimates and their analyses evident unstable movement of the landslide scarp occurring due to debris flow and rainfall, and a relatively moderate subsidence activity in the surrounding areas lying in the landslide zone.
- 14 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 15 (1) , 147-150
Persistent Scatter Identification and Look-Angle Error Estimation Using Similar Time-Series Interferometric Pixels
Persistent scatterer (PS) pixels contain highly coherent information, which is used in the estimation of geophysical parameters of interest. Conventionally, PS pixels are selected on the basis of the estimated noise present in the spatially uncorrelated phase component along with look-angle error. The phase history of selected PS pixels is corrected for the look-angle error followed by phase unwrapping and extraction of spatially correlated nuisance phase component leading to displacement estimation. In this letter, a novel PS selection method, which is based on a new index called the similar time-series interferometric pixels (STIPs) representing the number of neighborhood pixels with similar phase history, is proposed. In this approach, apart from PS selection, corresponding set of STIP is also used in refining look-angle error estimation. The efficiency of the proposed InSAR processing chain is demonstrated for the Sentinel-1A single look complex images of Rajmahal, Jharkhand, India, predominantly a coal mines area. Results, when compared with the conventional PS processing technique, reveal substantial improvement in terms of extracting more number of reliable PS with enhanced density.
- 14 December 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Geoscience and Remote Sensing Letters
- Vol. 15 (1) , 147-150
Persistent Scatter Identification and Look-Angle Error Estimation Using Similar Time-Series Interferometric Pixels
Persistent scatterer (PS) pixels contain highly coherent information, which is used in the estimation of geophysical parameters of interest. Conventionally, PS pixels are selected on the basis of the estimated noise present in the spatially uncorrelated phase component along with look-angle error. The phase history of selected PS pixels is corrected for the look-angle error followed by phase unwrapping and extraction of spatially correlated nuisance phase component leading to displacement estimation. In this letter, a novel PS selection method, which is based on a new index called the similar time-series interferometric pixels (STIPs) representing the number of neighborhood pixels with similar phase history, is proposed. In this approach, apart from PS selection, corresponding set of STIP is also used in refining look-angle error estimation. The efficiency of the proposed InSAR processing chain is demonstrated for the Sentinel-1A single look complex images of Rajmahal, Jharkhand, India, predominantly a coal mines area. Results, when compared with the conventional PS processing technique, reveal substantial improvement in terms of extracting more number of reliable PS with enhanced density.