Björn Andresen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Björn Andresen has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Arman Fathollahi
Department of Electrical and Computer Engineering, Aarhus University, 8000 Aarhus, Denmark
4 shared publications - Meysam Gheisarnejad
Department of Ecole de Technologie Superieure, University of Quebec, Montreal, QC, Canada
4 shared publications - Mohammad Hassan Khooban
Department of Electrical and Computer Engineering, Aarhus University, 8200 Aarhus, Denmark
4 shared publications Hamed Farsizadeh
Department of Electrical and Computer Engineering, Aarhus University, Aarhus, Denmark
2 shared publications- Allahyar Akhbari
Department of Electrical and Computer Engineering University of Kashan Kashan Iran
1 shared publication Frank Martin
Siemens Gamesa Renewable Energy, Kongens Lyngby, Denmark
1 shared publication
Latest Publications
- Open Access
- 17 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 100316-100327
Adaptive Fixed-Time Control Strategy of Generator Excitation and Thyristor-Controlled Series Capacitor in Multi-Machine Energy Systems
This paper introduces the Adaptive Coordinated Fixed-Time Synergetic Controller (ACFSC) designed for the Thyristor Controlled Series Capacitor (TCSC) and the generator excitation system. The primary objective is to enhance power system transient stability and voltage regulation performance particularly in scenarios involving unknown generator parameters. For the controller design of both generator excitation and TCSC, a linear combination of local parameters is employed to achieve the control objectives. Control laws and update laws for unknown parameters are provided for both single-machine systems connected to the infinite bus (SMIB) and multi-machine power systems. In addition, an online parameter adaptation method is proposed to further improve transient stability and achieve satisfactory voltage regulation performance in multi-machine power systems. Ultimately, the proposed nonlinear controller’s implementation is simulated in both SMIB and WSCC-type 3 power systems. The numerical results underscore significant advancements in augmenting transient stability and voltage regulation performance especially when faced with the challenge of unknown generator parameters.
- 17 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 100316-100327
Open AccessAdaptive Fixed-Time Control Strategy of Generator Excitation and Thyristor-Controlled Series Capacitor in Multi-Machine Energy Systems
This paper introduces the Adaptive Coordinated Fixed-Time Synergetic Controller (ACFSC) designed for the Thyristor Controlled Series Capacitor (TCSC) and the generator excitation system. The primary objective is to enhance power system transient stability and voltage regulation performance particularly in scenarios involving unknown generator parameters. For the controller design of both generator excitation and TCSC, a linear combination of local parameters is employed to achieve the control objectives. Control laws and update laws for unknown parameters are provided for both single-machine systems connected to the infinite bus (SMIB) and multi-machine power systems. In addition, an online parameter adaptation method is proposed to further improve transient stability and achieve satisfactory voltage regulation performance in multi-machine power systems. Ultimately, the proposed nonlinear controller’s implementation is simulated in both SMIB and WSCC-type 3 power systems. The numerical results underscore significant advancements in augmenting transient stability and voltage regulation performance especially when faced with the challenge of unknown generator parameters.
- Open Access
- 17 July 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (7) , 419
Enhancing Transient Stability in Multi-Machine Power Systems through a Model-Free Fractional-Order Excitation Stabilizer
The effective operation of model-based control strategies in modern energy systems, characterized by significant complexity, is contingent upon highly accurate large-scale models. However, achieving such precision becomes challenging in complex energy systems rife with uncertainties and disturbances. Controlling different parts of the energy system poses a challenge to achieving optimal power system efficiency, particularly when employing model-based control strategies, thereby adding complexity to current systems. This paper proposes a novel model-independent control approach aimed at augmenting transient stability and voltage regulation performance in multi machine energy systems. The approach involves the introduction of an optimized model-free fractional-order-based excitation system stabilizer for synchronous generators in a multi machine energy system. To overcome the limitations associated with complex system model identification, which add degrees of simplification at defined operating conditions and assume the system model remains fixed despite high uncertainty and numerous disturbances, an optimal model-independent fractional-order-based excitation control strategy is introduced. The efficacy of the proposed approach is validated through comparative numerical analyses using the MATLAB/Simulink environment. These simulations were conducted on a two-area, 12-bus multi-machine power system. Simulation results demonstrate that the presented excitation system stabilizer outperforms conventional controllers in terms of transient and small-signal stability. It also suppresses the low-frequency electromechanical oscillations within the multimachine energy system.
- 17 July 2024
- Published by MDPI AG in Fractal and Fractional
- Vol. 8 (7) , 419
Open AccessEnhancing Transient Stability in Multi-Machine Power Systems through a Model-Free Fractional-Order Excitation Stabilizer
The effective operation of model-based control strategies in modern energy systems, characterized by significant complexity, is contingent upon highly accurate large-scale models. However, achieving such precision becomes challenging in complex energy systems rife with uncertainties and disturbances. Controlling different parts of the energy system poses a challenge to achieving optimal power system efficiency, particularly when employing model-based control strategies, thereby adding complexity to current systems. This paper proposes a novel model-independent control approach aimed at augmenting transient stability and voltage regulation performance in multi machine energy systems. The approach involves the introduction of an optimized model-free fractional-order-based excitation system stabilizer for synchronous generators in a multi machine energy system. To overcome the limitations associated with complex system model identification, which add degrees of simplification at defined operating conditions and assume the system model remains fixed despite high uncertainty and numerous disturbances, an optimal model-independent fractional-order-based excitation control strategy is introduced. The efficacy of the proposed approach is validated through comparative numerical analyses using the MATLAB/Simulink environment. These simulations were conducted on a two-area, 12-bus multi-machine power system. Simulation results demonstrate that the presented excitation system stabilizer outperforms conventional controllers in terms of transient and small-signal stability. It also suppresses the low-frequency electromechanical oscillations within the multimachine energy system.
- Open Access
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 25949-25966
Advancements on Grid Compliance in Wind Power: Component & Subsystem Testing, Software-/Hardware-in-the-Loop, and Digital Twins
The rapid expansion of wind power needs increased efforts in establishing rules for connecting wind power plants (WPPs) through grid codes and standards. This makes grid compliance testing and model validation more complex for wind turbine generator (WTG) manufacturers and WPP developers. This paper explores various challenges and solutions within the wind industry concerning grid compliance and the integration of large-scale WPPs. Traditionally, WTG original equipment manufacturers (OEMs) conduct grid compliance tests on full-scale prototype turbines, while WPP developers predominantly engage in studies for new WPPs based on offline EMT and RMS simulations. Up to this point, these approaches have sufficed to ensure grid compliance for WTGs and WPPs. However, as the wind sector progresses, new testing methods are required to meet the growing WT capacity, WPP complexity, and deployment pace, aiming to achieve society’s sustainability targets. The industry is actively exploring methodologies that address these challenges by testing new turbine subsystems and components at the development level, employing software-/hardware-in-the-loop real-time simulation for WTG/WPP interoperability assessment, and ensuring control and protection performance verification during design and operation. Additionally, digital twin approaches are being considered, encompassing the entire development and operation chain for grid compliance and connection aspects. Ultimately, this paper presents a fresh overview of these strategies, outlining definitions and the pros/cons for the stakeholders involved in the process.
- 13 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 25949-25966
Open AccessAdvancements on Grid Compliance in Wind Power: Component & Subsystem Testing, Software-/Hardware-in-the-Loop, and Digital Twins
The rapid expansion of wind power needs increased efforts in establishing rules for connecting wind power plants (WPPs) through grid codes and standards. This makes grid compliance testing and model validation more complex for wind turbine generator (WTG) manufacturers and WPP developers. This paper explores various challenges and solutions within the wind industry concerning grid compliance and the integration of large-scale WPPs. Traditionally, WTG original equipment manufacturers (OEMs) conduct grid compliance tests on full-scale prototype turbines, while WPP developers predominantly engage in studies for new WPPs based on offline EMT and RMS simulations. Up to this point, these approaches have sufficed to ensure grid compliance for WTGs and WPPs. However, as the wind sector progresses, new testing methods are required to meet the growing WT capacity, WPP complexity, and deployment pace, aiming to achieve society’s sustainability targets. The industry is actively exploring methodologies that address these challenges by testing new turbine subsystems and components at the development level, employing software-/hardware-in-the-loop real-time simulation for WTG/WPP interoperability assessment, and ensuring control and protection performance verification during design and operation. Additionally, digital twin approaches are being considered, encompassing the entire development and operation chain for grid compliance and connection aspects. Ultimately, this paper presents a fresh overview of these strategies, outlining definitions and the pros/cons for the stakeholders involved in the process.
- Open Access
- 7 November 2023
- Published by MDPI AG in Fractal and Fractional
- Vol. 7 (11) , 808
Multi-Machine Power System Transient Stability Enhancement Utilizing a Fractional Order-Based Nonlinear Stabilizer
Given the intricate nature of contemporary energy systems, addressing the control and stability analysis of these systems necessitates the consideration of highly large-scale models. Transient stability analysis stands as a crucial challenge in enhancing energy system efficiency. Power System Stabilizers (PSSs), integrated within excitation control for synchronous generators, offer a cost-effective means to bolster power systems’ stability and reliability. In this study, we propose an enhanced nonlinear control strategy based on synergetic control theory for PSSs. This strategy aims to mitigate electromechanical oscillations and rectify the limitations associated with linear approximations within large-scale energy systems that incorporate thyristor-controlled series capacitors (TCSCs). To dynamically adjust the coefficients of the nonlinear controller, we employ the Fractional Order Fish Migration Optimization (FOFMO) algorithm, rooted in fractional calculus (FC) theory. The FOFMO algorithm adapts by updating position and velocity within fractional-order structures. To assess the effectiveness of the improved controller, comprehensive numerical simulations are conducted. Initially, we examine its performance in a single machine connected to the infinite bus (SMIB) power system under various fault conditions. Subsequently, we extend the application of the proposed nonlinear stabilizer to a two-area, four-machine power system. Our numerical results reveal highly promising advancements in both control accuracy and the dynamic characteristics of controlled power systems.
- 7 November 2023
- Published by MDPI AG in Fractal and Fractional
- Vol. 7 (11) , 808
Open AccessMulti-Machine Power System Transient Stability Enhancement Utilizing a Fractional Order-Based Nonlinear Stabilizer
Given the intricate nature of contemporary energy systems, addressing the control and stability analysis of these systems necessitates the consideration of highly large-scale models. Transient stability analysis stands as a crucial challenge in enhancing energy system efficiency. Power System Stabilizers (PSSs), integrated within excitation control for synchronous generators, offer a cost-effective means to bolster power systems’ stability and reliability. In this study, we propose an enhanced nonlinear control strategy based on synergetic control theory for PSSs. This strategy aims to mitigate electromechanical oscillations and rectify the limitations associated with linear approximations within large-scale energy systems that incorporate thyristor-controlled series capacitors (TCSCs). To dynamically adjust the coefficients of the nonlinear controller, we employ the Fractional Order Fish Migration Optimization (FOFMO) algorithm, rooted in fractional calculus (FC) theory. The FOFMO algorithm adapts by updating position and velocity within fractional-order structures. To assess the effectiveness of the improved controller, comprehensive numerical simulations are conducted. Initially, we examine its performance in a single machine connected to the infinite bus (SMIB) power system under various fault conditions. Subsequently, we extend the application of the proposed nonlinear stabilizer to a two-area, four-machine power system. Our numerical results reveal highly promising advancements in both control accuracy and the dynamic characteristics of controlled power systems.
- 26 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (9) , 3504-3508
Robust Artificial Intelligence Controller for Stabilization of Full-Bridge Converters Feeding Constant Power Loads
The dc/dc full-bridge (FB) converters are often utilized as the interface system in telecom power applications. The constant power loads (CPLs) in the telecom power systems demonstrate negative impedance which threatens the stability of the dc/dc converters. To address this issue, in this brief, a nonlinear controller is designed for the stabilization of the dc/dc full-bridge converter feeding CPLs. The soft actor–critic (SAC) algorithm with deep neural networks is adopted based on deep reinforcement learning (DRL) for optimal tuning of the controller parameters in the control law of an established nonlinear controller. According to the control requirements of the FB interface system, a reward signal is defined to train the neural networks of SAC. An efficient solution based on Hardware-in-the-Loop (HIL) is adopted for verifying and validating the feasibility of the proposed scheme using the OPAL-RT 5600.
- 26 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (9) , 3504-3508
Robust Artificial Intelligence Controller for Stabilization of Full-Bridge Converters Feeding Constant Power Loads
The dc/dc full-bridge (FB) converters are often utilized as the interface system in telecom power applications. The constant power loads (CPLs) in the telecom power systems demonstrate negative impedance which threatens the stability of the dc/dc converters. To address this issue, in this brief, a nonlinear controller is designed for the stabilization of the dc/dc full-bridge converter feeding CPLs. The soft actor–critic (SAC) algorithm with deep neural networks is adopted based on deep reinforcement learning (DRL) for optimal tuning of the controller parameters in the control law of an established nonlinear controller. According to the control requirements of the FB interface system, a reward signal is defined to train the neural networks of SAC. An efficient solution based on Hardware-in-the-Loop (HIL) is adopted for verifying and validating the feasibility of the proposed scheme using the OPAL-RT 5600.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (12) , 4974-4978
Reducing Impact of Constant Power Loads on DC Energy Systems by Artificial Intelligence
Due to the negative impedance potential of constant power loads (CPLs), the stability of power electronic converters-based electrical distribution networks is prone to instability. This letter proposes a robust control technique based on deep reinforcement learning to stabilize a DC microgrid (MG) with parallel boost converters when feeding CPLs. For this purpose, a model-free sliding mode controller (MFSMC) has been applied to the DC MG. The MFSMC controller does not need any identification of converters in the DC MG system while ensuring the efficiency and the stability of the control synthesis. The key control coefficients are designed by Proximal Policy Optimization (PPO) Reinforcement Learning (RL). The PPO is made from two deep neural networks (NNs) (actor NN and critic NN) which are trained to adjust the coefficients of the MFSMC controller. The MFSMC controller designed by the PPO with actor-critic architecture is applied to the DC MG system feeding CPL in an OPAL-RT setup to verify the efficiency of the proposed controller through Hardware-in-the-Loop (HiL) simulations.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 69 (12) , 4974-4978
Reducing Impact of Constant Power Loads on DC Energy Systems by Artificial Intelligence
Due to the negative impedance potential of constant power loads (CPLs), the stability of power electronic converters-based electrical distribution networks is prone to instability. This letter proposes a robust control technique based on deep reinforcement learning to stabilize a DC microgrid (MG) with parallel boost converters when feeding CPLs. For this purpose, a model-free sliding mode controller (MFSMC) has been applied to the DC MG. The MFSMC controller does not need any identification of converters in the DC MG system while ensuring the efficiency and the stability of the control synthesis. The key control coefficients are designed by Proximal Policy Optimization (PPO) Reinforcement Learning (RL). The PPO is made from two deep neural networks (NNs) (actor NN and critic NN) which are trained to adjust the coefficients of the MFSMC controller. The MFSMC controller designed by the PPO with actor-critic architecture is applied to the DC MG system feeding CPL in an OPAL-RT setup to verify the efficiency of the proposed controller through Hardware-in-the-Loop (HiL) simulations.
- 29 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Emerging Topics in Computational Intelligence
- Vol. 7 (1) , 102-110
Adaptive Speed Control of Electric Vehicles Based on Multi-Agent Fuzzy Q-Learning
Electric vehicles (EVs) are expected to account for a significant percentage of the vehicle market in the coming years. The speed regulator is the inseparable part of EVs to solve challenges such as managing battery energy or adapting to road conditions. Since the operation of the EV system is time-variant due to parametric variations and road situations, the regulation of such systems is a complex task that cannot be effectively accomplished by the conventional deterministic control methodologies. To address the control challenges corresponding to the EV, the ultra-local model (ULM) with extended state observer (ESO) is developed for the speed tracking problem of the system. The Fuzzy Q-learning multi-age system (MAS) is also adopted to adaptively regulate the gains of the ULM controller in an online manner. The robustness of the established controller has been assessed by experimental data based on the new European driving cycle (NEDC) and altering some critical parameters of the EV test system. Moreover, the real-time verifications for the tracking problem of NEDC are also conducted by hardware-In-the Loop (HiL) simulation in the EV system.
- 29 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Emerging Topics in Computational Intelligence
- Vol. 7 (1) , 102-110
Adaptive Speed Control of Electric Vehicles Based on Multi-Agent Fuzzy Q-Learning
Electric vehicles (EVs) are expected to account for a significant percentage of the vehicle market in the coming years. The speed regulator is the inseparable part of EVs to solve challenges such as managing battery energy or adapting to road conditions. Since the operation of the EV system is time-variant due to parametric variations and road situations, the regulation of such systems is a complex task that cannot be effectively accomplished by the conventional deterministic control methodologies. To address the control challenges corresponding to the EV, the ultra-local model (ULM) with extended state observer (ESO) is developed for the speed tracking problem of the system. The Fuzzy Q-learning multi-age system (MAS) is also adopted to adaptively regulate the gains of the ULM controller in an online manner. The robustness of the established controller has been assessed by experimental data based on the new European driving cycle (NEDC) and altering some critical parameters of the EV test system. Moreover, the real-time verifications for the tracking problem of NEDC are also conducted by hardware-In-the Loop (HiL) simulation in the EV system.
- 23 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (2) , 586-590
Smart Extreme Fast Portable Charger for Electric Vehicles-Based Artificial Intelligence
Due to the increase in the number of electric vehicles (EVs) in the world, there is a need to design superior performance and lower operating costs of charging infrastructures to serve these vehicles. Merging extreme fast charging technology with the portable feature can provide a user-friendly and cost-effective structure for charging EVs. This paper proposes a Smart Extreme Fast Portable Charger (SEFPC) for Electric Vehicles which have several input ports (e.g., the power grid or Renewable Energy Sources (RESs)/Energy Storage Systems (ESSs)) and an output port with an optimal charging operation mode based on considering the condition of the available power sources and battery of EVs for saving the energy and time charging. Moreover, a model-free sliding mode controller-based machine learning algorithm is applied to find optimal charging operation mode based on the battery state and power of sources condition to increase battery life and overall system efficiency. Finally, real-time results based on the OPAL-RT are provided to validate the efficacy and feasibility of the proposed SEFPC and model-free sliding mode controller.
- 23 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 70 (2) , 586-590
Smart Extreme Fast Portable Charger for Electric Vehicles-Based Artificial Intelligence
Due to the increase in the number of electric vehicles (EVs) in the world, there is a need to design superior performance and lower operating costs of charging infrastructures to serve these vehicles. Merging extreme fast charging technology with the portable feature can provide a user-friendly and cost-effective structure for charging EVs. This paper proposes a Smart Extreme Fast Portable Charger (SEFPC) for Electric Vehicles which have several input ports (e.g., the power grid or Renewable Energy Sources (RESs)/Energy Storage Systems (ESSs)) and an output port with an optimal charging operation mode based on considering the condition of the available power sources and battery of EVs for saving the energy and time charging. Moreover, a model-free sliding mode controller-based machine learning algorithm is applied to find optimal charging operation mode based on the battery state and power of sources condition to increase battery life and overall system efficiency. Finally, real-time results based on the OPAL-RT are provided to validate the efficacy and feasibility of the proposed SEFPC and model-free sliding mode controller.