YCYi Chen

Yi Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yi Chen has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Induced charge electro-osmotic mixing performance of viscoelastic fluids in microchannels with an electrically conductive plate

    by Yuqi Wei, Yi Chen, Jun Xu, Jie Li

    Micromixers have important applications in lab-on-a-chip, biomanufacturing, and chemical engineering. In this study, a micromixer with a conductive barrier plate based on the induced charge electro-osmosis is proposed. The Oldroyd-B constitutive model was chosen to characterize the flow characteristics of viscoelastic fluids, and the Poisson–Boltzmann model was used to characterize the electrokinetic properties. The effects of the installation of the conductive plate, the concentration of the polymer, and the shape of the conductive plate on the mixing were studied based on the finite volume method. The mixing efficiency of the viscoelastic fluids is 78.3% when a non-conductive plate is placed in the micromixer. However, placing a conductive plate increases the mixing efficiency to 89.8%. As the polymer concentration increases, the mixing efficiency increases, which is attributed to the elastic instability. As the curvature of the conductive plate increases from 0° to 360°, the mixing efficiency of the Newtonian fluid increases by 2.82%, while that of the polyacrylamide solutions at concentrations of 100 and 250 ppm increases by 5.31% and 1.97%, respectively.


  • Mixing performance of the induced charge electro-osmosis micromixer with conductive chamber edges for viscoelastic fluid

    by Yi Chen, Zhuoyao Lv, Yuqi Wei, Jie Li

    Enhancing the micro-channel flow mixing is always a difficult problem. In this study, a micromixer based on induced charge electroosmosis is proposed. A T-shaped micromixer, which has a chamber with conductive surfaces in the channel is chosen. Due to the electroosmotic effect of the induced charge, the induced potential is generated on the conductive surface. The Oldroyd-B constitutive model is chosen to characterize the flow characteristics of polyacrylamide (PAA) solution, and an open-source solver named rheoTool based on the finite-volume method is used. The effect of the chamber shape, the chamber size, the conductive edges' numbers in the chamber, and the applied electric intensity on the mixing efficiency are investigated. The results show that the micromixer with conductive edges in the chamber has better mixing effect because of the vortices. At the same time, compared with other shapes, the micromixer with diamond chamber has the best mixing effect, and the mixing efficiency reaches 79.51%. In addition, the mixing efficiency of one conductive edge in the diamond chamber is 4.39% higher than that of the two conductive edges chamber. It is found that increasing the chamber size will improve the mixing efficiency, the mixing efficiency increased by 12.76% with the increase of chamber size. On the other hand, when increasing the electric field intensity from 100 V/cm to 200 V/cm, the mixing efficiency will decrease.