KSKetian Sun

Ketian Sun

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ketian Sun has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Particle Shape-Driven Stiffness Anisotropy in Calcareous Sand and the Underlying Mechanism

    by Yan Gao, Ketian Sun, Quan Yuan, Le Sun, Xudong Tang

    The angular shape and breakage of particles for calcareous sand significantly influence its mechanical behavior and the safety of the engineering. Although previous studies have explored the impact of particle shape on the mechanical properties of calcareous sand, the effects of shape-induced stiffness anisotropy and particle breakage remain insufficiently investigated. This study employs the Yade open-source 3D discrete element platform to conduct a series of numerical simulations of isotropic compression and simple shear tests on calcareous sand, examining stiffness, deformation characteristics, microscopic behavior, anisotropic properties, and the influence of different particle breakage rates. The results reveal that particle shape-driven stiffness anisotropy in calcareous sand is obvious. The horizontal shear modulus is different from the vertical modulus by up to 15% under confining pressures of 50 kPa to 1200 kPa. Irregularly shaped particles tend to align in a layered fabric under gravitational deposition, resulting in spatial anisotropy in the distribution of contact normals. Strong contact forces concentrate in the direction of gravitational deposition (i.e., the vertical direction), leading to significant anisotropy in shear modulus, with the horizontal shear modulus being notably greater than the vertical one. The values of horizontal shear modulus ranging from 40 MPa for chunky particles to 120 MPa under high confining pressure. While increasing confining pressure generally enhances the shear modulus of calcareous sand, the concentration of strong contact forces in the vertical direction due to particle shape causes differential increments in shear modulus across directions, thereby altering anisotropy. Particle breakage under high confining pressure (10%) disrupts the concentration of strong contact forces in the vertical direction and triggers a “surrounding particle compensation” mechanism (accounting for >95% of cases), leading to homogenization of contact force distribution. This significantly reduces the shear modulus and diminishes the degree of anisotropy by up to 50% at breakage rates of 10%. The cross-scale relationship between particle morphology, breakage, and fabric evolution is quantified.

  • Open Access

    Influence of Pile Diameter on Lateral Load Behavior and Failure Mechanisms of Large-Diameter Monopiles

    by Yanlun Wang, Yan Gao, Quan Yuan, Ketian Sun, Yuchao Jiang, Le Sun

    SCIEPublish is an international open-access journal publishing service provider run by SCIE Publishing Limited, dedicated to supporting and inspiring scientists or institutions/societies who aspire to publish high-quality journals.


  • Open Access

    Simulation and Risk Assessment of Flood Disaster at the Entrance to a Rail Transit Station under Extreme Weather Conditions—A Case Study of Wanqingsha Station of Guangzhou Line 18

    by Yuchao Jiang, Yan Gao, Quan Yuan, Xiaohan Li, Ketian Sun, Le Sun

    With the rapid development of urbanization and underground transportation, as well as the frequent occurrence of extreme weather conditions such as extreme rainfall, flooding disasters for rail transit are becoming severe, and need to be urgently clarified in terms of the mechanism causing them. In this study, a comprehensive model for water damage at the entrance to a rail transit station is proposed, emphasizing the entire process of extreme weather–surface ponding–underground intrusion. The model is validated by the inundation process of Line 5 of the Zhengzhou Metro during the “7.20” event and further applied to Wanqingsha Station of Guangzhou Metro Line 18 in China to determine the surrounding water depth, distribution, total water inflow volume, and water damage time under different rainfall intensities, rain patterns and protection scenarios. It was found that when rainfall reaches the level of a 1-in-2000-years event, the surface water begins to invade the internal rail transit system through the rail transit entrances. When facing extreme rainfall akin to the “7.20” event in Zhengzhou, the rail transit system in Wanqingsha Station meets a heightened risk of water damage, resulting in significantly deeper water levels compared to 1-in-5000-year rainfall event in Guangzhou and exceeds the height of the subway entrances. Analysis of the water intrusion process reveals that, as rainfall intensity escalates, the total inflow water volume into the rail transit system increases while escape time diminishes. Moreover, under identical rainfall intensity, pre-type rainfall yields the highest total water inflow, whereas mid-type rainfall exhibits the shortest escape time. Enhancing the protection conditions can markedly attenuate surface water intrusion into the subterranean rail transit system, thereby enhancing the evacuation time for individuals within the system.


  • Open Access

    Stiffness Anisotropy and Micro-Mechanism of Calcareous Sand with Different Particle Breakage Ratios Subjected to Shearing Based on DEM Simulations

    by Yan Gao, Ketian Sun, Quan Yuan, Tiangen Shi

    Stress-induced anisotropy in calcareous sand can cause an uneven displacement in island reef engineering. In this study, stiffness, as a quantitative indicator, is explored to reveal the stress-induced anisotropy in calcareous sand. Based on the discrete element method, the stiffness anisotropic characteristics of calcareous sand during shearing, as well as the impact of particle breakage, are investigated by numerical simulations. Both the macro and micro responses, i.e., the maximum shear modulus, contact normal, strong and weak contact normal force, and the direction of particle breakage, are explored for calcareous sand with different particle breakage ratios. The results show that calcareous sand exhibits notable anisotropy during shearing, with the maximum shear modulus in the vertical direction (deviatoric stress direction) being significantly greater than that in the horizontal direction. Moreover, the higher the particle breakage rate, the lower the stiffness and its anisotropy. The micro-mechanism results indicate that the primary particle breakage during the shearing process occurs in the vertical direction. That is, the particle breakage weakens the strong contact force in the vertical direction, leading to a redistribution of the strong contact forces from the vertical direction to other directions. This redistribution mainly manifests in a decrease in the anisotropy of contact normal and contact vector within the sample, as well as a decrease in the proportion of strong contact forces in the overall contacts. This, in turn, reduces the shear strength and stiffness of calcareous sand, particularly in the vertical direction, and results in a decrease in the maximum shear modulus and its anisotropy. The maximum reduction can be up to 50% of the original value. These insights can provide a certain theoretical support for the uneven displacement and long-term stability of calcareous sand for islands and reefs.


  • Open Access

    Research on the Application of MEMS Intelligent Sensor in Abnormal Monitoring of Metro Tunnel by Simplified Model Tests

    by Yan Gao, Ketian Sun, Jiayi Tian, Xiaodong Wu

    The current monitoring methods for tunnel structure deformation mainly focus on laser distance measurement, fiber Bragg grating, photogrammetry, electronic total station, hydrostatic leveling and so on. Compared with traditional monitoring methods, MEMS sensors have the advantages of small size, low cost, low energy consumption and high accuracy. In this paper, MEMS sensors are used for the continuous real-time intelligent monitoring of model tunnels, and the multi-point deployment of MEMS sensors is set up for the tunnel structure monitoring with the indicators of acceleration and inclination. The results demonstrated that β-sample interpolation of the angles of the MEMS measurement points, and then integration of the overall displacements can better reflect the form of uneven settlement of the tunnel. For tunnel models with uneven settlement as the main deformation, the angle interpolation method allows the MEMS sensor to measure the vertical displacement more accurately and to determine the load mode to a certain extent. However, for tunnel models with global settlement as the main deformation, the results vary considerably from reality, as only the uneven part of the settlement can be measured using the angular interpolation method.